Yarisworld Archive

Scion XB 1NZ-FE Turbo build

391 posts · 99,292 views · page 2 of 8

Replies continued

cali yarisCanoga Park, CA · Sep 23, 2010#51
I think Garm was the only one who had anything real positive to say on that site if memory serves me correct.
Not true. And the thread was cleaned up.

I took a look at that site and posted like 3 times and not once did I bash anyone.
You posted one introduction thread, to which you received 100% respectful replies.

Let's keep it real, ok?

xbg has some good knowledge and has been appropriately complimented on his unfinished but sick build. Can we just move on instead of dragging up crap?
xbgodThread starterFlorida · Sep 23, 2010#52
And your right bro. no reason to drag crap around. And now that I went back and looked again it was one of the same shit-heads that started crap here too.

Gotta love those guys...Anyways I see it's your site so understandable for the chime-in. You can't police the world, there will always be those that try to make things difficult.

Well guys almost ready to get back to business with this build. Getting stateside very soon.

Lets keep it positive no more negative Nancy's

XBG
xbgodThread starterFlorida · Sep 23, 2010#53
I retract my last,

That shit is still on your site...cleaned up my ass. Unless I'm Hellen Keller the link Wes provided it's still active.

XBG
xbgodThread starterFlorida · Sep 23, 2010#54
Should any of you guys need parts of any kind for your 1NZ-FE motors. Let me know. I don't have to keep any overhead or buy-in's for good prices.

XBG
sleey0PA · Sep 23, 2010#55
Grrrr.

Get back home, xbg!!!
xbgodThread starterFlorida · Sep 23, 2010#56
going as fast as I can. Belive me I got lots to do. I gotta get you squared away.

I got the PRI trade show in Orlando, so I gotta have my car ready for the Precision Performance booth for display. Got a couple of Corporate Scion events to do by the holidays.

My calander is getting full and I'm not even home yet.

XBG
sleey0PA · Sep 23, 2010#57
Hey, don't be complaining. To me, sounds like fun (shows and whatnot).

When is the PRI in O-town? Might try and catch it if I can.
xbgodThread starterFlorida · Sep 23, 2010#58
It's all good, just lots of preperation. PRI I belive is Dec. 9-12. Let me know if you intend to be their. I'll arrange a meet and greet with some people from NHRA.

You'll dig it

XBG
maxxman420San Diego, Ca · Sep 23, 2010#59
"falls on ground"... "craps pants"
Bluevitz-rsOshawa, Ontario, Canada · Sep 23, 2010#60
Originally Posted by maxxman420 ↑
"falls on ground"... "craps pants"
Pour guy, too much to take in at one time? 😆
xbgodThread starterFlorida · Sep 23, 2010#61
I must be semi-retarted.....Explain your self.
sleey0PA · Sep 23, 2010#62
Yeah. Im not getting it either, xb. Lol

Pm sent
maxxman420San Diego, Ca · Sep 23, 2010#63
Originally Posted by Bluevitz-rs ↑
Pour guy, too much to take in at one time? 😆
haha just a llittle😳
xbgodThread starterFlorida · Sep 24, 2010#64
We'll your either trying to put in a sly comment without being straight forward or I'm still retarted.

either way..it makes no sense.

Movin-on to what this thread is about tooooo many right turns.

XBG
YodaFL · Sep 24, 2010#65
To sum it up. He was in awe of seeing your build. So much so he couldnt handle it. Leading to him craping his pants and dying.
xbgodThread starterFlorida · Sep 24, 2010#66
my stupid-ass finally got what you were trying to say.

I must be getting old.

Almost time to get home and turn some wrenches, then trailer it to the dyno.

Then it's into body shop for some external modifications (vizage / FAB style that is).

XBG
maxxman420San Diego, Ca · Sep 24, 2010#67
dude cant wait to see those dyno charts!
Bluevitz-rsOshawa, Ontario, Canada · Sep 24, 2010#68
You ginna Wide-Body the box? That'd be sick.
xbgodThread starterFlorida · Sep 24, 2010#69
Me too. I'll be using a MD500 Dyno, it's as real world as you can get. It calculates for wind resistance and hill incline driving. Numbers on a MD500 are usually lower do to that real world factor; which is about 18%. You will never see me dyno a car where you pull the wheels off and take out the rotating factor. I will keep this tune to as real drving as possible, no gimmicks.

XBG
maxxman420San Diego, Ca · Sep 24, 2010#70
Oh sweet thats an awesome dyno
xbgodThread starterFlorida · Sep 24, 2010#71
I actually got a FAB front bumper from Japan (stupid expensive) Then also got the side skirts and rear bumper from there made out of Carbon-fiber. I chose a vizage Grill cause it complemented the the rest of it, not to mention it was 250.00 and not 599.00 like the FAB grill. I wanted true JDM parts. I used a company called Bullet-Proof automotive to get this stuff.

XBG
cali yarisCanoga Park, CA · Sep 24, 2010#72
BulletProof is a good company, but overpriced. I can import anything they can, direct from Japan, for less.

Try JapanParts.com also for great service on JDM import parts.
xbgodThread starterFlorida · Sep 24, 2010#73
Thanks for the heads-up. To bad I already bought the stuff. But thats ok, I had never really been into body kits and parts untill my friends kept pushing me to give it a different look.

I'll get with you should anything brake and needs to get replaced.

I'm W/D with Siebon and VIS but thats it as far as body stuff go's.

XBG
cali yarisCanoga Park, CA · Sep 24, 2010#74
bodykits are NOT my favorite thing to deal with, anyways. 🙂
xbgodThread starterFlorida · Sep 24, 2010#75
Agreed, pain in the ass.....hince why I don't like to deal with them either. It dosen't make me faster, it just causes me to do more sanding to make it look right.

XBG
sleey0PA · Sep 24, 2010#76
Xbg

J
What does wd.mean? You mentioned that with blitz too.
xbgodThread starterFlorida · Sep 24, 2010#77
warehouse distributor.

Means I can buy it as low as it can be bought for.

XBG
sleey0PA · Sep 24, 2010#78
Ic.

Thanks aras.

Stay safe and get home soon!
xbgodThread starterFlorida · Nov 23, 2010#79
Some new pics of my turbo and head prior to install...Big , Bad Thumper...

5 attachments not included in this copy

H3LlIoNMidatlantic · Nov 24, 2010#80
awwwww crap....you bolted the manifold on the wrong side!

LOL Just kidding Aras...she's looking good brother. Gonna be great to see this puppy back together. You have any show dates in VA/DC/MD/NC?
ParmasML · Nov 24, 2010#81
Nice turbo although I think you can have a better exhaust manifold that give you more power.

Also you will probably have an issue with your top cover that you can't remove it without removing the engine.
xbgodThread starterFlorida · Nov 24, 2010#82
no, I can get into it just fine. All is easily accessable.

Here are some more...............

2 attachments not included in this copy

xbgodThread starterFlorida · Nov 24, 2010#83
and one more

1 attachment not included in this copy

cali yarisCanoga Park, CA · Nov 24, 2010#84
An equal length exhaust mani would give more power, but I'm making 357 whp with my log, so it's not sooooooo bad. LOL
YodaFL · Nov 24, 2010#85
Looks nice but also really crowded...
ParmasML · Nov 25, 2010#86
Man it's too over tuned here! I can't even locate the Oil cap!

I imagine having to service the engine.... what a pain in the ass
xbgodThread starterFlorida · Nov 25, 2010#87
It is a little crazy. But not to bad to service. spark plugs right on top, oil cap right to the left. Easy to get to. I'll post the engine bay soon so you can see it complete.

XBG
xbgodThread starterFlorida · Nov 25, 2010#88
some more to seeeeeeeeeeee

4 attachments not included in this copy

cali yarisCanoga Park, CA · Nov 25, 2010#89
What coils and/or ignition module?
Blown_xaVirginia · Nov 26, 2010#90
looks cool. alot of room where the rain gutter is for a topmount. we have a xb we are doing with same turbo but with an equal length tubular. May offer it as a production peice. The tial ss housings are nice,good choice.
xbgodThread starterFlorida · Nov 27, 2010#91
Hey Cali, the coil packs are Bosch and my Ignition is from Microtech. The Crank Trigger is by Electromotive.

Off to CFT on Monday to finish wiring the new T/B and Nitrous Electronics then it's tune time. By next weekend I'll have some numbers.

XBG
xbgodThread starterFlorida · Nov 29, 2010#92
Complete engine bay pics folks. Hope you think it looks good. Cause I'm getting closer to broke. JJ

XBG

5 attachments not included in this copy

xbgodThread starterFlorida · Nov 29, 2010#93
and a few more

5 attachments not included in this copy

YodaFL · Nov 29, 2010#94
nice
PETERPOOPOahu · Nov 29, 2010#95
HOLY..........FART
cali yarisCanoga Park, CA · Nov 30, 2010#96
yeah that looks "good".. LOL 😲 🙇 👏
xbgodThread starterFlorida · Nov 30, 2010#97
Thanks Bro
47_MasoN_47Northwest Alabama · Nov 30, 2010#98
Holy crap...

Is there anything left of the original motor? lol
Focus_Sh1ftNew Jersey · Nov 30, 2010#99
Hot day-um.

Hey, what's going on with that other head you had?
xbgodThread starterFlorida · Nov 30, 2010#100
I brought it home from the shop. Once I know all is good with my tune this week then I'm cutting it loose.