Replies continued
cali yarisCanoga Park, CA · Jan 20, 2011#301 They do not come with springs or retainers. I just spoke with Junichi who owns the place.
Whatever. I have the email. I was considering becoming the USA distributor, but the price turned me off.
The fact of the matter is that JUN did not do these cams alone, there is another company involved. They have been providing the springs and retainers until JUN completes their R&D.
But since you're so sure, I won't post any more about it.
xbgodThread starterFlorida · Jan 20, 2011#302I know anything can be done. And have a few ideas up my sleve. I would like to put together a complete head kit that works out of the box for everyone. But I don't think I could get enough people to buy them to make it worth the while.
It would incompus the JUN turbo cams that are not regrinds getting a head over to Jon at Ferrea and using all their valvetrain with custom springs and custom valve lengths.
We would use two different bucket sets from Toyota one set all the same for intake and one set all the same for exhaust. The cams would have to be the same exact grind everytime, for this would set the standard for the valve lengths. And i'm sure JUN could do them the same everytime since their not regrinds and made right in the CNC machine.
So here is how it would work:
1. Head ported and polished at AEBS (Advanced Engine Breathing Systems)
2. JUN Cams
3. Ferrea Valvetrain with higher rated springs, which I can have done
4. Stock buckets from Toyota for ease of use
Once Jon does the valvetrain once all specs are in and can be ordered anytime.
This would be a nice set-up out of the box no guess work, that anybody could put together. All brand new shit no regrinds no used valves no junk.
Would be about 3,900.00 without head. You would send yours to AEBS.
XBG
xbgodThread starterFlorida · Jan 20, 2011#303Here is the E-mail's from JUN
JUN Auto Mechanic
3-1-7 Sekimachikita Nerimaku Tokyo
Tel 81-3-3920-4165 Fax 81-3-3594-2689
Jan 20
Dear Mr. Bibber
Thank you for refference of performance of your car. Of course our cams
are produced by casting cores.
For NA
1. 64-9.0mm
2. 68-9.5mm
For turbo
1. 68-10.5mm
Sorry we dont make valve springs yet. About NA we use them with the
stock valve springs.
Thank you,
Dear Mr. Aras
Thank you for your mail.
1. JUN camshaft set 1NZ-FE jpy 96,000
2. Transfer charge jpy 12,000
JUN Auto Mechanic
3-1-7 Sekimachikita Nerimaku Tokyo
Tel 81-3-3920-4165 Fax 81-3-3594-2689
Jan 20
Dear Mr. Bibber
If for turbo 68-10.5, you have to change valve springs for high lift
also change buckets for tappet adjustment. Sorry we dont have them yet
Can you look for them by yourself?Thank you,
Junichi
xbgodThread starterFlorida · Jan 20, 2011#304One thing I'm good at..............
Getting shit no one else can get done.
XBG
TamagoOff Grid · Jan 20, 2011#305 Originally Posted by
xbgod ↑ One thing I'm good at..............
Getting shit no one else can get done.
XBG
i get shit all day.
PETERPOOPOahu · Jan 20, 2011#306 Originally Posted by
xbgod ↑ One thing I'm good at..............
Getting shit no one else can get done.
XBG
What do you do for work?
and where's that video?
H3LlIoNMidatlantic · Jan 20, 2011#307 Originally Posted by
xbgod ↑ One thing I'm good at..............
Getting shit no one else can get done.
XBG
You're also good at ignoring my 1/4 mile questions.
One thing you're
not good at...posting the vid of the car that you promised.
Is this thing going to be @ Import Alliance in Nashiville, TN in July?
H3LlIoNMidatlantic · Jan 20, 2011#308 Originally Posted by
Tamago ↑ i get shit all day.
I
take shits all day.
Justsayin. 😁
TamagoOff Grid · Jan 21, 2011#309 Originally Posted by
PETERPOOP ↑ What do you do for work?
and where's that video?
he takes orders from people in the military
xbgodThread starterFlorida · Jan 21, 2011#310Yes ,
I take orders to kill people. Thats my job and damn is it good to watch someone drop. especially when there coming at you. and you can see the look in their eyes when they know their fucked.
You'll get a video when I get it all from the guys at CFT that shot it. Your an impaticent bitch. And I didn't promise you shit. My life dosen't revolve around a fucking car. You want a 1/4 mile time I can't even get enough time in my week to even go for a fun joy ride.
XBG
H3LlIoNMidatlantic · Jan 21, 2011#311eh. what a waste of a great build then. Still curious, is this going to be @ Import Alliance in July?
xbgodThread starterFlorida · Jan 21, 2011#312Their is a video in the works and not just a plain dyno pull video. You guys should know by now that I don't do just plain run of the mill stuff. I like quality and quanity so be paticent and some time soon will have something to show.
As far as the show in TN. I got to look at my calander and see what schools I got coming up. The rest of this month and part of next is already booked for me.
Also been fine tunning my car. changing a couple of things with the down-pipe and waste gate set-up.
And the interrior is under way with new Sparco stuff as well as new front and rear calipers from Aerospace Components. Getting ready to put in Anodized Red calipers. Lots of little new things going in. Just got my new 160amp chromed alternator with chromed adjuster bracket in. Lots of small details going on all at once and still haven't got to the outside yet.
I still have to deal with a new front-end new carbon rear bumper and side skirts. Not to mention new carbon spoiler. Then I need to take it to the spray booth at my parents shop to spray it. Then re-tag the back window for this years heavy hitters that helped-out.
So lots going as well as I have a magazine wanting to do a photo shoot for a cover. This is how busy I am right now. And some things are more important in the order of the to-do list. Exposure is my main concern so finishing the complete ride is priority #1.
XBG
xbgodThread starterFlorida · Jan 21, 2011#313Here is a pic of the new front-end
1 attachment not included in this copy
schragenColorado · Jan 21, 2011#314^meh...
Scubaru Stevecalgary · Jan 21, 2011#315i like it, very clean looking,
a kit that looks like it could be oem 🎉
xbgodThread starterFlorida · Jan 21, 2011#316Thats why I chose this one. The fact it looks like it could be OEM but also satisfies my need to have a low mount intercooler.
XBG
H3LlIoNMidatlantic · Jan 22, 2011#317 Originally Posted by
xbgod ↑ As far as the show in TN. I got to look at my calander and see what schools I got coming up. The rest of this month and part of next is already booked for me.
July 16/17 is date. Nashville, TN
xbgodThread starterFlorida · Jan 25, 2011#318Thanks for the dates dude.
XBG
YodaFL · Jan 26, 2011#319//Thread jack
Yo xb if you can get me a $300 rate for that dyno tune i will drive down there tomorrow😁
xbgodThread starterFlorida · Jan 26, 2011#320What ECU you using?
Also if it's one he tunes I'll get you the 300 rate. But I can't guarantee the time frame. Depends how many he has in front of you.
XBG
YodaFL · Jan 26, 2011#321Aem fic. Don't have work tomorrow or Saturday so one of those days
xbgodThread starterFlorida · Jan 26, 2011#322If your serious I'll text Rolo and see what he says.
XBG
YodaFL · Jan 26, 2011#323yea i am
xbgodThread starterFlorida · Jan 26, 2011#324Ok your set 10:30 am saturday. 300.00 for full AEM/FIC tune. As many pulls as it takes to get it where you want it.
Call the shop tommorow morning around 10:00 am and give either Jose or Rolo if he is available your info and that I refered you.
Shop number: 407-273-1051
Your Welcome
XBG
PETERPOOPOahu · Jan 26, 2011#325sweeet
YodaFL · Jan 27, 2011#326The date is set
cali yarisCanoga Park, CA · Jan 27, 2011#327Good, maybe while you're there YOU can find out why xbg's motor gave up at 5200 and was tuned so lean. 😉
cali yarisCanoga Park, CA · Jan 28, 2011#328^
As for anything else I will comment no more.
I'm interested in the tuner's comments.
cali yarisCanoga Park, CA · Jan 28, 2011#329^ If you're willing to do that, your dyno would be great information.
Nexus1155Dorchester · Jan 28, 2011#330Ummmm, all of those values were pretty close in the range of stoich, regardless you do not want that in boost. Let alone, fuel wouldn't cause that lean of a condition when it wasn't lean like that before higher rpm's unless there was another reason for it.
Even quoted from that same website.
Unfortunately many folks we talk to think the stoichiometric air/fuel ratio is where they should set their fuel system at wide open throttle. So we are torn about posting or not posting stoichiometry data because of that potential problem.
cali yarisCanoga Park, CA · Jan 28, 2011#331We know the tuner had control over the A/F. I believe that build has pretty big injectors and all the good fuel mods, so it's not a lack of fuel. What we don't know is the why of it.
The only reason I can figure doing pulls at WOT that lean is to get an hp number. But maybe there's another reason -- I keep saying I'm not an expert.
Nexus1155Dorchester · Jan 28, 2011#332Yeah, but when you are turbo and maxing the turbo to the engines potential. You will get much more power running a more advanced ignition and proper AFR than to just lean it out. If everything really is in order, and the tuner didn't do it then there is another issue. But, my finger points at the tuner because he built the car as well as tuned it.
I do not think it's the turbo though, if it runs out of air at the top end, and the injectors are still injecting at the same constant then it would be rich since not as much air is getting to the engine.
And how would you just disable VVT-i like that? Just unplug the solenoid? ehhhhh? I don't think thats the proper way.
KCALB SIRAYVirginia · Jan 28, 2011#333 Originally Posted by
xbgod ↑ Yes ,
I take orders to kill people. Thats my job and damn is it good to watch someone drop. especially when there coming at you. and you can see the look in their eyes when they know their fucked.
You'll get a video when I get it all from the guys at CFT that shot it. Your an impaticent bitch. And I didn't promise you shit. My life dosen't revolve around a fucking car. You want a 1/4 mile time I can't even get enough time in my week to even go for a fun joy ride.
XBG
👎
xbgodThread starterFlorida · Jan 28, 2011#334Well Yoda, enjoy your tuning session.
Don't bother asking about my build to Rolo. He won't give out any info on my project. His been part of my build for 5 years and some of the things we have done is known only to us. Like Ive said some things we keep to our selves. All he'll tell you is yes Aras car makes alot of power.
Have fun
XBG
cali yarisCanoga Park, CA · Jan 28, 2011#335 He won't give out any info on my project. His been part of my build for 5 years and some of the things we have done is known only to us. Like Ive said some things we keep to our selves.
Why?
xbgodThread starterFlorida · Jan 28, 2011#336Not interisted in giving out all my details on a forum for others to decide if what I've done is worth the effort. Or if it meets their standard or ajendas. You guys don't get to know everything somethings are just that, private.
Sorry
XBG
KCALB SIRAYVirginia · Jan 28, 2011#337Scion XB 1NZ-FE Turbo build <----title of thread
I thought the thread was to help others realize what can be done? I'd almost go as far as quoting you and saying you wanted to be a pioneer and help others get to the point you are at and show the world what can be done with this engine.
cali yarisCanoga Park, CA · Jan 28, 2011#338Lame, coming from someone who claimed his purpose here was to help out the community by sharing information.
YodaFL · Jan 28, 2011#339Honestly if he doesnt want share that's his choice. Though I am curious I kno that some builders like to keep certain things under wrap. He built his motor and showed what can be done with it. The why this and that can be up for debate but it's just one of those things. I have meet many people that would not even tell you what they have done or what they have under the hood. This is no different. Happy you got what you wanted out of it and I am hoping I can get my tune really dialed in since I am pushing the limit for my compression ratio. Little room for error.... Lol but I love living on the edge.
cali yarisCanoga Park, CA · Jan 28, 2011#340Then don't offer.
I've already been where most are trying to go and I will help others get there.
It's not about me anymore, it's about our whole club and getting everyone their.
I think we can all learn something new from each other since we carry the same motor.
I will post pics and continue with explaining my mods as questions arrise.
etc.
Nexus1155Dorchester · Jan 28, 2011#341It really does suck as Garm has pointed out that information should be shared. It's not like there needs to be a huge secret behind all of this.
He has listed ALL of the parts he uses so whats just a little more info? I am sure I can go out and bore a block and do some work and make 400+hp. Did you recently see the 4G63 that made 1500hp?
You have that size piping, going into an expansion into a 70mm? TB going into different size piping into a different size flange. Is that good for flow? Even with a race prepped head, if the rest of the system isn't laminar it won't mean much.
We all like to learn from other peoples builds. Even if other people get angry or upset, other people will learn. Whether it be an achievment or a mistake, it's still progression.
YodaFL · Jan 28, 2011#342I understand what you all are saying but at the end of the day if he dont want to share beyond this point thats up to him. Sux, yes, but i really dont think its even up to him. Probably the builder don't wanna give out any secrets. He might have had the intention of sharing, and he has, but when it came down to this part its hush hush. I can only guess. The important parts of his build have already been shared already so there is knowledge in that. The tune is the most important imo but this is where i see lots of tuners keep a tight lip. Its to protect there business. Its there secret recipe. Kinda like the Big Mac sauce....Ummm Thats yummy lol. I am sure some of you have come across or at least heard of this.
cali yarisCanoga Park, CA · Jan 28, 2011#343^ If you read his comment, it's a 180 from earlier comments, and clearly has nothing to do with the tuner.
Not interisted in giving out all my details on a forum for others to decide if what I've done is worth the effort. Or if it meets their standard or ajendas. You guys don't get to know everything somethings are just that, private.
TamagoOff Grid · Jan 29, 2011#344so is everyone finally realizing why this thread was truly started? someone wasn't getting enough attention on his own forums so he came here to be "worshipped"..
ParmasML · Jan 29, 2011#345 Originally Posted by
Tamago ↑ so is everyone finally realizing why this thread was truly started? someone wasn't getting enough attention on his own forums so he came here to be "worshipped"..
I agree with Tamago.
A forum is made to share everything not to keep the important information to be the champion.
Well I am building the engine myself aswell and if it wasn't for the community I am still searching blind without knowing what I am doing. By posting and asking questions, I learned myself and the community from my build. If you knew what are you doing (which still I am not sure it is) , from the beginning of your registering with yarisworld you should contribute your 2 cent.
I know from experience that after many hard work and many research and time, its a shame someone copies you with a click but in the end, someone will! it's just a matter of time.
I repeat this thread is made for the truly enjoyment for himself, to welcome people to his tuner business and to sell parts not sure for the care of the community.
Alright you should be proud but not that loud.
I would like to take the opportunity to give my appreciation to the community, especially to Garm as he helped me much on my build. Cheers!¬
One more thing, if you want to be the champion and keep it to yourself, why I should trust your information. You could anytime mislead us with info, which infact ppl could try it and fail .........and what your aswer WOULD BE or your tuner or your motor not good enough.
``¬¬Over and out roger - UNSUBSCRIBED
Nexus1155Dorchester · Jan 29, 2011#346^^^ Now that just seems like attacking him.
I've checked, he's banned from most scion forums from reacting the same way. That really sucks that it happened. but as well, people antagonized him first, but thats only after him coming in all cocky from the getgo in every forum.
Just because I own guns doesn't mean I can go around shooting people. Jus' saying!
cali yarisCanoga Park, CA · Jan 29, 2011#347^ Being "antagonized" justifies this response, then? just sayin' back.... 😆
There seems to be a certain ass-clown who has a car with 2 dicks hanging out the ass-end for tale pipes.
👎
KCALB SIRAYVirginia · Jan 29, 2011#348 Originally Posted by
PETERPOOP ↑ So can we see that video? :)
🙄 I doubt it.
xixarchangelxixOakville, Ontario · Jan 29, 2011#349I've wanted to say it for a while now... I don't get why someone with a scion is on here. It's YARISworld. I used to have a Celica that was done up... but I didn't join a forum for the Lotus Elise just because we shared the same engine...
Nexus1155Dorchester · Jan 29, 2011#350Well, it was just shown why he joined as you can see, but I hear your argument. I don't own a Yaris myself, my girl does, but I still love and hook up the car. I personally drive an S4 and an Envoy.
Sometimes just to get ideas I see myself going over to scionlife just to check out new advancements in the 1NZ