yes for vid!!!
Stay tuned
1,311 posts · 595,379 views · page 8 of 27
Replies continued
Saturday's race: http://www.youtube.com/watch?v=fxIGX2hYUI0
Thanks for sharing video. Cool, and exciting story!
Looks like that Datsun 510 (?) was blocking you a few times in the beginning.
Looks like that Datsun 510 (?) was blocking you a few times in the beginning.
Even worse on Sun... The 510 is an FP car, owner says 175hp. On Sun he was racing an EP Miata (even quicker car) and both of them were holding up the top two (slower) HP cars. 🤷 That's racing.Originally Posted by justjesus ↑Thanks for sharing video. Cool, and exciting story!
Looks like that Datsun 510 (?) was blocking you a few times in the beginning.
That would be too frustrating for me.
Sunday's race, part 1: http://www.youtube.com/watch?v=EGhnpRtp-ME
Part 2: http://www.youtube.com/watch?v=cOhkHFf7GG0
Part 3: http://www.youtube.com/watch?v=Lm01a2-rU8o
Part 2: http://www.youtube.com/watch?v=cOhkHFf7GG0
Part 3: http://www.youtube.com/watch?v=Lm01a2-rU8o
Yup, that would frustrate me as well.Originally Posted by Jason@SportsCar ↑...both of them were holding up the top two (slower) HP cars. 🤷 That's racing.
I consider being able to even be in that position (where a faster car is holding me up) a good thing. 😉Originally Posted by justjesus ↑Yup, that would frustrate me as well.
you selling that camcon?
Maybe...Originally Posted by Yoda ↑you selling that camcon?
Some great shots from Miller:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I don't think I ever followed up from the accident... We found no broken parts, however, we do think we found the culprit. While sweeping the new suspension (running it throughout its range without a spring in place, so we can check travel limits) we found that is was possible for the front swaybar to come in contact with the inner steering rack boot on the passengers side. This required extreme compression with some steering input.
From this we can only extrapolate that in the process of curb hopping at Buttonwillow we found this limit. Seems like it was a fluke, we went over that same curb 50 times that day with no issues, and I doubt we will ever experience this again. Even at Miller I was all over the curbs and had no problem.
From this we can only extrapolate that in the process of curb hopping at Buttonwillow we found this limit. Seems like it was a fluke, we went over that same curb 50 times that day with no issues, and I doubt we will ever experience this again. Even at Miller I was all over the curbs and had no problem.
sweet pics...
Installment number one of the Yaris project is off to the printers, SportsCar readers should have it on hand in about three weeks.
Is there a way to get a copy of the magazine without being a SCCA member??
maybe there is an online version.
Not currently, it use to be available at some of the bigger book chains, but that was some time ago.Originally Posted by soloecho2 ↑Is there a way to get a copy of the magazine without being a SCCA member??
At some point, after the print copy has circulated to all the members, I am sure we will see a PDF of the feature online. 😉
I'm almost sure that Barnes & Noble has them.
Got the Yaris on the scales today and did the corner weights. Current weight with three bars of fuel (just over a 1/4 tank) is 1860lbs.
Also built a small air dam.
Picture not included in this copy
Also built a small air dam.
Picture not included in this copy
How did you find the balance from side to side?
My Echo has nearly perfect weight distribution on the fronts, but the rears are 30 kg different. And the heavier side is the side with the muffler (but no fuel tank).
My Echo has nearly perfect weight distribution on the fronts, but the rears are 30 kg different. And the heavier side is the side with the muffler (but no fuel tank).
When we first rolled it on the scales it was 100lbs light on the right rear, with near perfect front weights. I guess our 2.74lb Coast Fabrication muffler took too much weight off of that corner. 😉Originally Posted by rob323 ↑How did you find the balance from side to side?
My Echo has nearly perfect weight distribution on the fronts, but the rears are 30 kg different. And the heavier side is the side with the muffler (but no fuel tank).
We have been able to improve the weights a bit, but we are trying to be really careful about overloading the left front - Road America is nearly all right hand turns, and we don't want to burn off the left front tire at the Runoffs.
Hot off the presses... Just got a finished copy of the October issue with the Yaris intro. SCCA members should have the issue in 7-10 days.
Just got the call from Toyota... New VVT cam gear installed, and we are fully operational. 👍 Back to the dyno for more power.
New as in improved (adjustable?) or new as in standard replacement? In tother words, why the change? 🙂Originally Posted by Jason@SportsCar ↑Just got the call from Toyota... New VVT cam gear
Standard replacement. The old one was frozen. 🤷Originally Posted by rob323 ↑New as in improved (adjustable?) or new as in standard replacement? In tother words, why the change? 🙂
I didn't think it got that cold in California. Ha Ha Ha
Any links to the artical yet ????
Any links to the artical yet ????
Man! I dont know how I missed this thread! This is so cool! I have been wanting to see an HP Yaris since 2001. My SCCA AX co-driver, Evan, had mentioned he knew some guys building a HP Yaris in So Cal. He said it was going up on two wheels so I knew it had to be fairly fast and have some stick. Now I have seen it. Very cool work!!!
Love the bias plys on the car! Do you have pictures of your suspension mods or are those "top secret"? My bigest complaint about my old echo was suspension arms twisting and not holding tires flat to the ground. What have you done to combat inherent weakness of the ecnobox suspension arms, mounts, bushings , etc?
Did I miss dyno specs on this motor? What kind of numbers is it pulling? Do you have a LSD in this thing? That was my other compliant is way too much inside wheel spin in tight stuff. I combatted that with huge rear bar but it needed an LSD in my opinion.
Too bad about not being able to get it in GP classing in Solo. Yeah it would get smoked in EP. I run against the EP national Champ in my FP Boxster and he consitently gets me by a second. Dont think that little Yaris would have a chance against that RX3. But GP would be perfect!
Love the bias plys on the car! Do you have pictures of your suspension mods or are those "top secret"? My bigest complaint about my old echo was suspension arms twisting and not holding tires flat to the ground. What have you done to combat inherent weakness of the ecnobox suspension arms, mounts, bushings , etc?
Did I miss dyno specs on this motor? What kind of numbers is it pulling? Do you have a LSD in this thing? That was my other compliant is way too much inside wheel spin in tight stuff. I combatted that with huge rear bar but it needed an LSD in my opinion.
Too bad about not being able to get it in GP classing in Solo. Yeah it would get smoked in EP. I run against the EP national Champ in my FP Boxster and he consitently gets me by a second. Dont think that little Yaris would have a chance against that RX3. But GP would be perfect!
I know Evan... Have not seen him much this year because I have not done many PCA (or any) autocrosses.Originally Posted by echosqwat ↑Man! I dont know how I missed this thread! This is so cool! I have been wanting to see an HP Yaris since 2001. My SCCA AX co-driver, Evan, had mentioned he knew some guys building a HP Yaris in So Cal. He said it was going up on two wheels so I knew it had to be fairly fast and have some stick. Now I have seen it. Very cool work!!!
Love the bias plys on the car! Do you have pictures of your suspension mods or are those "top secret"? My bigest complaint about my old echo was suspension arms twisting and not holding tires flat to the ground. What have you done to combat inherent weakness of the ecnobox suspension arms, mounts, bushings , etc?
Did I miss dyno specs on this motor? What kind of numbers is it pulling? Do you have a LSD in this thing? That was my other compliant is way too much inside wheel spin in tight stuff. I combatted that with huge rear bar but it needed an LSD in my opinion.
Too bad about not being able to get it in GP classing in Solo. Yeah it would get smoked in EP. I run against the EP national Champ in my FP Boxster and he consitently gets me by a second. Dont think that little Yaris would have a chance against that RX3. But GP would be perfect!
I had a chance to talk to a few SEB/PAC guys this week about the Yaris, and compare some data. Hopefully they will consider moving it to GP. Any Yaris owners that are SCCA members should submit a letter to the SEB for the move to GP, just so they know people would consider running in GP. We are down 60-70hp from the real EP cars, and weigh a good bit more, the Yaris would get crushed in EP.
What a week, just wrapped up the Solo natls. I am sitting at the airport in Omaha Neb, after getting up at 3:00am Pac time to catch our flight in Lincoln, which was dropped due to weather. 😠
I think I should have done more than three autocrosses this year before heading to Natls, I was a little rusty, no clean runs the first day, but was the quickest RX-8 in CS the second day. 🙁 Oh well, always next year. My wife won her fifth Championship in CSL.
As soon as I get home I have to pick up the Yaris and meet the Toyota transporter for the trip to Road America and the Runoffs... I think Sept is going to kill me.
A lot of the info you are looking for is in the issue of SportsCar you should have any day now. The rest will be in a later issue - after the Runoffs. 😉
Good luck at runnoffs. Congrats on your and your wife's runs at solo Nats too. I was watching CS to see how the 370Z's did in that class. From what I saw looked like course was momentum course so pesky MX5's could hang with power cars.
Will keep my eye out for Sports Car mag.
Will keep my eye out for Sports Car mag.
Loading up for Road America...
Picture not included in this copy
The SSC Sentra
Picture not included in this copy
That is about half of our tires for the week. 😁
Picture not included in this copy
Picture not included in this copy
The SSC Sentra
Picture not included in this copy
That is about half of our tires for the week. 😁
Picture not included in this copy
So are you guys officially sponsored by Toyota?
The Yaris belongs to Toyota, we get to use it for one year. We built it, and I get to race it, but at the end of the day they own the car.Originally Posted by Bluevitz-rs ↑So are you guys officially sponsored by Toyota?
We had to rent the truck, but it beats making the three day drive to Road America.
Ouch. So who's paying for all the hardcore work being done to it and what becomes of all the part at the end of the year?Originally Posted by Jason@SportsCar ↑The Yaris belongs to Toyota, we get to use it for one year. We built it, and I get to race it, but at the end of the day they own the car.
We are fortunate enough to have a number of great partners helping us, some that we have worked with for years, and others that came on specifically for this project. It has not been painful at all... Unless you count the seemingly hundreds of hours of labor we have done ourselves.Originally Posted by Bluevitz-rs ↑Ouch. So who's paying for all the hardcore work being done to it and what becomes of all the part at the end of the year?
But the payoff comes next week at SCCA National Championship Runoffs. 👍
How many laptops does it take to tune a Yaris? 😆
Picture not included in this copy
Picture not included in this copy
Really?!?! How many!!!
And we have to wait til AFTER runoffs for more info? Darn. I'm still waiting to know your final HP / TQ numbers!!!
And we have to wait til AFTER runoffs for more info? Darn. I'm still waiting to know your final HP / TQ numbers!!!
I really admire you guys for what you have done :)
Just one for tuning... The other is to crunch numbers for VVT adjustment.Originally Posted by justjesus ↑Really?!?! How many!!!
And we have to wait til AFTER runoffs for more info? Darn. I'm still waiting to know your final HP / TQ numbers!!!
Final numbers will be included in the next SportsCar installment, date yet to be determined.
However, if you can get your hands on the Fall 2010 issue of Toyota Connection, there is a two page spread on the project, with HP#s - although it was the HP before we got the VVT fixed. 😈
I believe Connection is handed out at Toyota sponsored events, such as the Dew Tour and other sporting events.
any chance you'll share tuning data?
Nice article in Sportscar. Great work! I should have suspected Robello involvement in the motor.
I do not have the files, but I know a great shop. Church Automotive Testing does all of our cars, also tunes a number of World Challange and Rolex cars. 👍Originally Posted by thebarber ↑any chance you'll share tuning data?
http://home.earthlink.net/~spchurch/...motivetesting/
Easy to work with, quick turn around and understands the rules we have to deal with.Originally Posted by echosqwat ↑Nice article in Sportscar. Great work! I should have suspected Robello involvement in the motor.
http://www.rebelloracing.com/
is you engine super charged ?
i appreciate the link, but they're on the wrong corner of the continent...Originally Posted by Jason@SportsCar ↑I do not have the files, but I know a great shop. Church Automotive Testing does all of our cars, also tunes a number of World Challange and Rolex cars. 👍
http://home.earthlink.net/~spchurch/...motivetesting/
is you engine super charged ?No he is N/A
All motor.Originally Posted by henry33 ↑is you engine super charged ?
SCCA H Prod Level 2 prep rules require/allow: OE fuel injection (including stock manifold and throttle body), max compression ratio of 11.0:1, max cam lift of .390, port matching (max 1" deep). All of the peripherals are open, exhaust, CAI, ECU.
The Runoffs are less than a week away now - well qualifying anyway - and those that want to follow the racing action can see it live.
SCCA has live timing and scoring on its website: http://www.scca.com/event.aspx?hub=1&event=15558 This includes qualifying and race lap times.
And once again Speedcast TV will have live flag to flag coverage of every race: http://speedcasttv.com/scca/
If you follow sports car racing in North America you may have heard of the guys on the broadcast team... The biggest change will be the expansion to two announce crews. Sports car racing fans will recognize the familiar voices of veteran Runoffs announcers Greg Creamer, Dorsey Schroeder, Jim Tretow and John Bisignano throughout the broadcast. Current Runoffs racer Bart Wolf joins as the fifth member of the broadcast team and will work the booth as an analyst alongside Creamer.
Speedcast TV also uploads edited versions of the races, with in-car action added, on the website a few days after the event.
SCCA will also offer a DVD collection for sale around the first of the year.
The Yaris will hit the track for the National Championship race on Sept 25, at 2:30pm (Central). And it is very likely that because the Yaris is such an unusual car for the class it should get some good camera time.
SCCA has live timing and scoring on its website: http://www.scca.com/event.aspx?hub=1&event=15558 This includes qualifying and race lap times.
And once again Speedcast TV will have live flag to flag coverage of every race: http://speedcasttv.com/scca/
If you follow sports car racing in North America you may have heard of the guys on the broadcast team... The biggest change will be the expansion to two announce crews. Sports car racing fans will recognize the familiar voices of veteran Runoffs announcers Greg Creamer, Dorsey Schroeder, Jim Tretow and John Bisignano throughout the broadcast. Current Runoffs racer Bart Wolf joins as the fifth member of the broadcast team and will work the booth as an analyst alongside Creamer.
Speedcast TV also uploads edited versions of the races, with in-car action added, on the website a few days after the event.
SCCA will also offer a DVD collection for sale around the first of the year.
The Yaris will hit the track for the National Championship race on Sept 25, at 2:30pm (Central). And it is very likely that because the Yaris is such an unusual car for the class it should get some good camera time.
cool I have it on my calendar now. hope to be around to watch live -- good luck Jason
good luck I will watch too ;)
Picture not included in this copy