I don't know of anything being done outside of what they would do for any other Toyota racing in SCCA.Originally Posted by rick@NKRpedals ↑jason, does toyota plan to keep promoting and developing parts and support for the yaris in SCCA?
Stay tuned
1,311 posts · 595,379 views · page 10 of 27
Replies continued
The race has been posted: http://speedcasttv.com/scca/#/races/216
For those who don't get SportsCar, here is a link to download a PDF of the story.
http://pdfcast.org/pdf/sportscar-magazine-project-yaris
http://pdfcast.org/pdf/sportscar-magazine-project-yaris
Cool, Thanks!!!
thanks I have read 3 times ;)
give us more
give us more
The Yaris needed a bit more bling for the big show... And the SEMA wheels just showed up. 😎
The Yaris is back home, in the very nondescript warehouse where we first picked it up. Up next is the photo shoot with the American Eagle racecar, then off to SEMA.
Spotted a few more Yari collecting dust among the concepts and random show pieces.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Spotted a few more Yari collecting dust among the concepts and random show pieces.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
ah yes the Yaris "roadster", wondered where that ended up!
that's kind of sad to think that all those great, old showcars just sit in warehouses because corporations own them and nobody really knows what to do with them. i hope the sportscar yaris doesn't end up with a similar fate, but who knows.....?
Nearly every program/media/test fleet/show car has a short life span. I am not sure the time frame with Toyota, but from people I know at Mazda and Honda it is most often three years... Then they are crushed. 😲 From what I heard today the date with the crusher is going to be soon for many of the "older" cars at this location. The place is packed, and they need space for new stuff.😉 Keep in mind many of these are pre-production, so they could never be used on the street. Our Nissan racecar is VIN 81, and can never be anything but a racecar.Originally Posted by toad ↑that's kind of sad to think that all those great, old showcars just sit in warehouses because corporations own them and nobody really knows what to do with them. i hope the sportscar yaris doesn't end up with a similar fate, but who knows.....?
Not a done deal yet... But the word is we might get to run it one more year. 👍 However, it still has to get past the media day and our guest drivers in one piece. 😆
^ Good. I still want to point you by a few times. 😉
😆Originally Posted by cali yaris ↑^ Good. I still want to point you by a few times. 😉
With round two now a possibility, I am making my shopping list for SEMA... 👍
The American Eagle laid an egg.
Picture not included in this copy
Picture not included in this copy
One of the other Prod racers son did up a couple of the HP cars for Forza. 😎
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Off to SEMA...
ooh that is awesome! Hope you have fun! And get some wicked cools stuff too.
Back from SEMA... Man are my feet killing me, we put in some serious miles.
Toyota did a great job with the display, and cleaning the car up for the show. They made 500 Yaris and 500 X-Runner t-shirts, all gone in 90 minutes the first day. 😲
The Yaris was front and center on Tues.
Picture not included in this copy
Picture not included in this copy
They changed things up for Wed.
Picture not included in this copy
Mr. GT5 having a test fit before the big race. I think his phone call was, "the Yaris is awesome, ship the game NOW." 😆
Picture not included in this copy
Toyota did a great job with the display, and cleaning the car up for the show. They made 500 Yaris and 500 X-Runner t-shirts, all gone in 90 minutes the first day. 😲
The Yaris was front and center on Tues.
Picture not included in this copy
Picture not included in this copy
They changed things up for Wed.
Picture not included in this copy
Mr. GT5 having a test fit before the big race. I think his phone call was, "the Yaris is awesome, ship the game NOW." 😆
Picture not included in this copy
From the Toyota press room: http://pressroom.toyota.com/pr/tms/t...spx?ncid=12079
145hp 😲
I guess most of the power is locked up in the head 👏
I guess most of the power is locked up in the head 👏
not bad result for the atmospheric engine ;)
^ balanced and blueprinted also, not all in the head work. An inspiring result for an N/A build on that motor.
and I'm sure if they weren't restricted to certain stock parts it would be even higher. TB, intake manifold... ect.
Don't believe most of the info you are reading out there... Tons of people just take the Toyota press release and try to sexy it up - even the Toyota release has a typo, we did not start with a 5-door.😳 The engine is not balanced and blueprinted, 100% OE Toyota bottom end, never touched.Originally Posted by cali yaris ↑^ balanced and blueprinted also, not all in the head work. An inspiring result for an N/A build on that motor.
Also keep in mind, as I said when I posted the old dyno sheet, this is from a Dynapak, these are not at the wheels numbers. While I think we made great power for our first crack at this engine, it is not a 145hp at the wheels monster. In reality it should be down a hp or two from that, since we had to pull what was left of the aluminum pulleys off. 🙁
hmm, Ok I sit corrected.
isn't the old dyno before cams and management change, though?
isn't the old dyno before cams and management change, though?
145hp@7252rpm
moar redline?
moar redline?
oh, i see....peak power rpm fudged by toyota?Originally Posted by Jason@SportsCar ↑Here is the dyno graph before the AEM EMS 2.
Picture not included in this copy
Yes it was. I think the head and cams yielded a very small return.Originally Posted by cali yaris ↑hmm, Ok I sit corrected.
isn't the old dyno before cams and management change, though?
Bolt-ons and the Camcon will get you 90% of what we made. For the rest you need to get past the rev limiter, the AEM got us that, and better control of VVT-i, this is where the next chunk of power came from.
With our Level 2 prep limits only allowing us max .390 cam lift, and port matching 1" in, we did not make a lot of power on the head. There is still a lot left in there, but as long was we race the car in H Prod we can't go further into the head.
No, that was our old dyno sheet. Before the AEM, cams and port work. That was bolt-ons and the Camcon.Originally Posted by thebarber ↑oh, i see....peak power rpm fudged by toyota?
i wouldnt mind seeing the newer dyno sheet if you have access to it...Originally Posted by Jason@SportsCar ↑No, that was our old dyno sheet. Before the AEM, cams and port work. That was bolt-ons and the Camcon.
What all bolt-ons did you have on? Is there list somewhere?
All of the parts are listed in the story in SportsCar, there is a link to download a PDF of it in this thread.Originally Posted by 33OH ↑What all bolt-ons did you have on? Is there list somewhere?
In a nutshell - the power stuff:
AEM EMS series 2 - you need the ability to control the VVT-i/fuel/ign to make all the other parts work to full potential. Without a tune you will get minimal gains from the rest. This car was originally tuned for economy and reliability, there is a lot of power that can be unlocked with a proper tune.
Okada coils
K&N intake
DC header/Coast Fab muffler/no cat
SPEC aluminum flywheel
NST pulleys - these were on when we did the dyno runs, and for most of the season. Once we started running 7300+rpm on the track the crank pulley failed, so we went back to stock.
Awesome, thanks Jason. Your car rocks. Finally some motivation to try and pull some N/A power from a 1NZFE. 🙇
I love this thread.
NST pulleys - these were on when we did the dyno runs, and for most of the season. Once we started running 7300+rpm on the track the crank pulley failed, so we went back to stock.am i reading this right? you had the NST pulleys installed, then when u tweeked the engine and started running higher revs the NST crank shaft pulley broke? how bad was the damage?
also, im assuming that the NST pulleys are a bad idea for running past the stock rev limiter then?
this worries me cuz i just installed these guys and i autocross. sometimes on a quick straight i will stay in second and let the rev limiter bounce if there is a quick turn not to far but would be losing time if i go to third.
If you're on your rev limiter, you are at around 6250. You can't run past the stock rev limiter.
Jason's pulley broke in two, completely destroyed. Pretty sure a pic got posted.
Jason's pulley broke in two, completely destroyed. Pretty sure a pic got posted.
I would not worry about these at all on a car with a stock limiter.Originally Posted by ilikerice ↑am i reading this right? you had the NST pulleys installed, then when u tweeked the engine and started running higher revs the NST crank shaft pulley broke? how bad was the damage?
also, im assuming that the NST pulleys are a bad idea for running past the stock rev limiter then?
this worries me cuz i just installed these guys and i autocross. sometimes on a quick straight i will stay in second and let the rev limiter bounce if there is a quick turn not to far but would be losing time if i go to third.
^^ ok, good, thats what i was getting at... i dont plan on adjusting my rev limiter unless i do some serious head and bottom end work which probably never happend.
good thing it has the "tow" decal cus i thought that was just a bumper belly ringOriginally Posted by Jason@SportsCar ↑Fenders are done, looks funny with a 205-50-15 under there.
Picture not included in this copy
Picture not included in this copy
so is the hood used on the car a seibon one for a yaris as the article stated, or is it something else like you seemed to say in your post?
I know he skeletonized an existing hood, don't know which one.
I have no idea what post you are referring to, or what you took from it. Some things are made purposely vague until the publication is printed.Originally Posted by why? ↑so is the hood used on the car a seibon one for a yaris as the article stated, or is it something else like you seemed to say in your post?
The hood and hatch both started as production Seibon OE replacements. They were modified to suit our needs, including a sizable weight reduction accomplished by removing most of the fiberglass support structure they use.
Good stuff Jason. I'm crossing my fingers you get to race it another season. :)
Just got back from Toyota... Happy to see nothing got broken or stolen while the car was on display.Originally Posted by justjesus ↑Good stuff Jason. I'm crossing my fingers you get to race it another season. :)
Now I get to reset the suspension, mount up some more tires and head to Willow Springs next week. The VP's from Toyota and Sony are going to take some laps in the Yaris... And the quickest of the Sony guys will race it next month in Phoenix.
Got to see them unbox a test mule while we where there. Comes in on a flatbed in a crate. When they opened the create it already had all of the camouflage on it. They go to a lot of effort to hide the lines of a new model. And no, it was not a Yaris. 😆
Virtual racing is getting in the way of real racing... All of the Sony guys are tied up with GT5, so this weekends shootout has been pushed to December, with the final race date to be sometime in 2011.
Good news for us, now we have the car for the 2011 season for sure. Time to make it faster.
Good news for us, now we have the car for the 2011 season for sure. Time to make it faster.
where can I buy the T-shirt ?Originally Posted by Thirty-Nine ↑Well, I for one LOVED your car at SEMA.
http://www.subcompactculture.com/201...lub-racer.html
Even got the t-shirt.
http://www.subcompactculture.com/201...s-t-shirt.html
thanks
I don't know of any source. They made them on site for the press conference on Tuesday, and they were gone quick.Originally Posted by henry33 ↑where can I buy the T-shirt ?
thanks
😢Originally Posted by Jason@SportsCar ↑I don't know of any source. They made them on site for the press conference on Tuesday, and they were gone quick.
if anyone have spare one I will take it 🍻
^ If they are smart, they'll back up next season with some #99 merchandise. 👍
Stranger things have happened... These are projects our company was involved with some years back when we produced FJ magazine (note the RACER magazine logo). Both were later turned into diecast cars.Originally Posted by cali yaris ↑^ If they are smart, they'll back up next season with some #99 merchandise. 👍
Picture not included in this copy
Picture not included in this copy
http://www.diecastmodelswholesale.co...ser-TRD/Detail