Replies continued
rob323Joyner, Brisbane · Jun 6, 2010#301 Originally Posted by
Jason@SportsCar ↑ That seems like a lot of work... We found it much easier, and cheaper, to use the final drive and output shaft from an xB C50. 🤷 Direct bolt in. 👍
Is your box a C150 or a C154?
C50's are rare as over here (And I wouldn't be able to make use of my TRD 4.7:1 final drive kit).
cali yarisCanoga Park, CA · Jun 6, 2010#302Rob, I can send you a C50 anytime, we get them from salvage.
rob323Joyner, Brisbane · Jun 6, 2010#303Thanks for the offer Garm but it's not needed. I have a C52, a C150 and a C56 all stripped on my bench at home, I'm too far down the track to not make the most of it now. Bearings and synchros for the C56 are ordered. Just got to drill the C56 casing for the mount, throw it all together including the lsd and the TRD final drive and slap on the C150 bellhousing on it. End result should be a close ration gearset with a top speed of about 110mph depending on rev limit and tyre size.
Jason@SportsCarThread starterDebary, FL · Jun 9, 2010#304OK, what smart guy came up with an 8mm bi-hexagon head bolt. 😠 We got all the peripherals off, and the cams out, only to find we need this special socket to pull the head.
Oh well, the tool is on its way, and the head will wait a few more days. 🍻
Jason@SportsCarThread starterDebary, FL · Jun 11, 2010#305Things can start moving again... The 8mm bi-hexagon showed up today. 👍
So sometime between the tire test tomorrow, and racing on Sunday, I will hopefully find time to pull the head.
Jason@SportsCarThread starterDebary, FL · Jun 14, 2010#306Between our testing on Saturday, and playing on Sunday, no progress on the Yaris.
And what a disappointment, the Corvette I was racing on Sunday had ABS issues again, so the owner decided to park it.
I did find a suitable replacement, 430 Scuderia...
http://www.youtube.com/user/SportsCa.../0/m6-YM5FHGpI That was the coolest thing I have ever gotten to take a lap in. If you have the means I highly recommend getting one. If you don't, just find someone else who does. 😎
cali yarisCanoga Park, CA · Jun 16, 2010#307BEAST!
Jason@SportsCarThread starterDebary, FL · Jul 19, 2010#308Got the rest of our body work, it is getting painted this week. Hopefully the head comes back this week as well.
Also got the new engine management.
Hopefully it will be back to life within the next ten days. 👍
Jason@SportsCarThread starterDebary, FL · Jul 22, 2010#309Got a call from our engine guy... He was not happy with the first set of valve springs he received, so a new set is on the way. Should get the finished product on Monday now. Can't wait to see what it does on the dyno with head work and new cams. 🤤
Freshly painted fenders, hood and bumper just got dropped off. Time to get out of here and go install them.
cali yarisCanoga Park, CA · Jul 22, 2010#310power band should be very interesting now.
I'm doing even stronger springs now as well.
rob323Joyner, Brisbane · Jul 22, 2010#311I'd be curious to know what seat pressure you guys end up with with the stronger springs.
Jason@SportsCarThread starterDebary, FL · Jul 23, 2010#312Core support, radiator and front fenders are in.
And just when I had given up all hope of ever seeing our custom 13" wheels, I even bought another set of 15"s, a box full of wheels shows up. 8lbs 5oz of dead sexy aluminum. 🤘
cali yarisCanoga Park, CA · Jul 23, 2010#313Did you have any issues at all swapping in the final drive and output shaft from an xB? -- I think that's the way I recall you doing it.
Jason@SportsCarThread starterDebary, FL · Jul 23, 2010#314 Originally Posted by
cali yaris ↑ Did you have any issues at all swapping in the final drive and output shaft from an xB? -- I think that's the way I recall you doing it.
I did not install the parts myself, I just dropped off the trans and the parts, but I was told it was a perfect fit. However, the car has not moved under its own power with those gears, so the real test will come next week. 🤷 But we have no reason to think there will be an issue. 😎
Now do the math on converting to a 4.30 gear with a 20" tall tire. It should move now. Being under 1900lbs wont hurt either.
Best news... Just did a test fit with one of our custom three-piece wheels, and they clear the brakes. 👍 But I do need to get a set of longer studs, the centers are a little thick on these wheels.
Jason@SportsCarThread starterDebary, FL · Jul 25, 2010#315New dash and cluster. Still have a few wires to tie up.
Picture not included in this copy
Picture not included in this copy
cali yarisCanoga Park, CA · Jul 25, 2010#316I think "skeletonized" describes your interior. 👏
rob323Joyner, Brisbane · Jul 25, 2010#317What dash is that?
rob323Joyner, Brisbane · Jul 25, 2010#318 Originally Posted by
cali yaris ↑ Did you have any issues at all swapping in the final drive and output shaft from an xB? -- I think that's the way I recall you doing it.
Garm, what code is your current box (eg, C154) and what code is the XB box?
Jason@SportsCarThread starterDebary, FL · Jul 26, 2010#319Jason@SportsCarThread starterDebary, FL · Jul 26, 2010#320 Originally Posted by
rob323 ↑ Garm, what code is your current box (eg, C154) and what code is the XB box?
The USDM Yaris and early xB are both a C50. The outside of the case is different, so a complete swap is not in the cards, but the guts can be changed. 👍
rob323Joyner, Brisbane · Jul 26, 2010#321Nice, very jealous.
rob323Joyner, Brisbane · Jul 26, 2010#322 Originally Posted by
Jason@SportsCar ↑ The USDM Yaris and early xB are both a C50. The outside of the case is different, so a complete swap is not in the cards, but the guts can be changed. 👍
In that case, anything from a C50, C52 or C56 should swap around without too much drama, maybe a different bearing here and there but that's about it.
cali yarisCanoga Park, CA · Jul 26, 2010#323 The USDM Yaris and early xB are both a C50.
Correct, and now I have one of each, thanks to Jason playing guinea pig for us.
knowmercyOhio · Jul 26, 2010#324Needs moar pictures!!
Jason@SportsCarThread starterDebary, FL · Jul 26, 2010#325More hotness... The long awaited suspension has arrived. 🍻 Custom built mono-tube racing shocks. This is the same stuff that is currently being run on SCCA World Challenge cars.
With the gear change, new wheel/tire combo, engine work and suspension it should be a real eye opener at the next race.
justjesusOrange County · Jul 26, 2010#326Jason... show us the aluminum sexyness!!!!!!!
Jason@SportsCarThread starterDebary, FL · Jul 28, 2010#327The head is back on with the new cams installed. A few hours in the AM and it should be ready to run.
rob323Joyner, Brisbane · Jul 28, 2010#328Have any dramas with shims?
Jason@SportsCarThread starterDebary, FL · Jul 28, 2010#329 Originally Posted by
rob323 ↑ Have any dramas with shims?
I got it as a complete unit from our engine guy... Just had to pull the cams back out to put in the head bolts.
Jason@SportsCarThread starterDebary, FL · Aug 2, 2010#330Its alive... Sort of. Installed the head with the new cams, fired right up. Unfortunately it wont idle. I think I got one of the cams a tooth off on the timing chain. The engine builder seems to think all is well, just the stock ECU can't idle these cams.
Just to be safe I am going to pull the valve cover again 🙁 and check all the timing marks before we run it hard.
knowmercyOhio · Aug 2, 2010#331Yeah, big cams make idle go to crap usually on a stock ecu. IIRC you're tuned via piggy back right? Might be time to retune with more air being sucked into the engine... but yeah, start with timing, go from there. Also, we need moar pictures!!
Jason@SportsCarThread starterDebary, FL · Aug 3, 2010#332 Originally Posted by
knowmercy ↑ Yeah, big cams make idle go to crap usually on a stock ecu. IIRC you're tuned via piggy back right? Might be time to retune with more air being sucked into the engine... but yeah, start with timing, go from there. Also, we need moar pictures!!
Currently we are stock with a Camcon, which wont do what we need now. We have a custom stand alone setup being built right now - sort of stand alone, we will still have the stock ECU for a few things. 😉
Just finished all the body work, no time to check the cams yet. But it looks done for our shoot. Headed here in about 12 hours:
http://wikimapia.org/16838231/San-Be...rations-Center Doing a small feature for Toyota Connection magazine.
This will also give me a place to break in the engine and LSD.
Jason@SportsCarThread starterDebary, FL · Aug 4, 2010#333I am just not sure this new aero package will make the car faster.
Picture not included in this copy
The magic... When they are done it will look like the Yaris was going 100mph, instead of 1" a sec.
Picture not included in this copy
Got some miles on the engine and trans.
Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Aug 5, 2010#334Double checked the cam timing and everything is lined up. Our engine guy is convinced the stock ECU just cant deal with it. Fingers crossed that we get our custom harness and new engine management this weekend.
Jason@SportsCarThread starterDebary, FL · Aug 5, 2010#335It is a great day when the UPS man brings you a package you never ordered. 🤷 One of our sales guys mentions the Yaris project to one of his advertisers a few weeks ago, and they built us a set of brake pads to try. 🎉
justjesusOrange County · Aug 6, 2010#336Very nice!!
cali yarisCanoga Park, CA · Aug 6, 2010#337Jason, being able to set your idle might help. I have mine at 1100, I'm not sure the stock setting would work for me either.
It is a great day when the UPS man brings you a package you never ordered.
Not always; we got a big box of porn once. It wasn't even good porn.
Jason@SportsCarThread starterDebary, FL · Aug 6, 2010#338 Originally Posted by
cali yaris ↑ Jason, being able to set your idle might help. I have mine at 1100, I'm not sure the stock setting would work for me either.
Not always; we got a big box of porn once. It wasn't even good porn.
😆
soloecho2Orono, Ontario · Aug 9, 2010#339Did you ever get the fiberglass front fenders ??
Jason@SportsCarThread starterDebary, FL · Aug 9, 2010#340 Originally Posted by
soloecho2 ↑ Did you ever get the fiberglass front fenders ??
No, there did not seem to be enough people interested to make it worth doing. So we just went back to flares on stock fenders.
Jason@SportsCarThread starterDebary, FL · Aug 9, 2010#341 Originally Posted by
justjesus ↑ Jason... show us the aluminum sexyness!!!!!!!
Returned the new wheels. Just going to stick with the 15"s. I wish we could have made it work with the 13"s - the wheels actually worked, it was an issue with the manufacturer that we could not get past. 🙁
cali yarisCanoga Park, CA · Aug 10, 2010#342"an issue"?
PM me the details, maybe I'll pick them up.
Jason@SportsCarThread starterDebary, FL · Aug 10, 2010#343 Originally Posted by
cali yaris ↑ "an issue"?
PM me the details, maybe I'll pick them up.
I won't go into detail about why we chose not to use them, or who we got them from at this time. I am certain in your position you see first hand how dealing with the wrong manufacturer can be bad for business.
Any time we do something for use in the magazine we have to decided if we would spend our own money on the product/service/etc, and would we recommend this to someone else... The answer to both of these questions became no.
Personally I hate not using them. The 13" wheel/tire package was going to do so many good things, better gearing, lower CG, less weight. Ultimately I believe not having them will slow us down some at the Runoffs. But it is to late to do anything about it now, and ultimately you have to draw the line somewhere.
Jason@SportsCarThread starterDebary, FL · Aug 10, 2010#344On a happier note... Last night I pulled out the CamCon and associated wiring, and got the stock harness all patched up. I can now plug in our recently delivered custom plug-n-play harness for our new engine management. Going to get it tuned tomorrow.
We have also scheduled the first installment on the Yaris to go in the Oct issue of SportsCar, which we are working on right now.
Jason@SportsCarThread starterDebary, FL · Aug 12, 2010#345Long night... With still more to do. But it is alive and running on its new AEM plug-n-play. 👍 Details later.
cali yarisCanoga Park, CA · Aug 12, 2010#346good news!
Jason@SportsCarThread starterDebary, FL · Aug 12, 2010#347 Originally Posted by
cali yaris ↑ good news!
Bad news... The VTI (?) on the intake came has an issue. Not sure if it was caused by the wreck, shipping of the head/cams, or careless handling, but the unit is locked up. We can activate the VVT unit, pulled out the oil unit and we can see it move, we have full control with the AEM, but the cam is stuck.
We have a tune to race on this weekend, lots of HP, but the Tq is weak. 🙁 Going to have to fix it next week.
Sitting in the car now doing the program on the AIM dash.
Jason@SportsCarThread starterDebary, FL · Aug 12, 2010#348If anyone is interested in the parts needed to do the xB final drive (4.312) swap:
33321-52110, output shaft
41221-52270, ring gear
90105-11040, ring gear bolts (8)
Depending on mileage you may also want to replace bearings and seals, but you don't need to source those from Toyota.
cali yarisCanoga Park, CA · Aug 12, 2010#349ooh thanks, now I can be 100% sure I got the right parts. 🙇
Jason@SportsCarThread starterDebary, FL · Aug 16, 2010#350What a long weekend... 5:00am Friday I hit the road to Utah, made it to the track in time to register and tech. Getting home at 2:30am today sucked. Damn you Vegas traffic.
Practice at 8:00am on sat. Qualified 1st in HP by a good margin. Things were going good during the race. I had a good gap over 2nd, and just planned to nurse the car around to my needed finish (I had to finish one more race to get an invite to the Runoffs). Late in the race the heat started to take its toll on the front tires and 2nd place was closing in. With only a few laps to go I got hosed by a slower car, he drove right in the middle of one of the fastest turns, and could not decided which way he was going to go. I was forced to brake and I watched 2nd zoom right by me. 😠 At this point only two laps left, and I did not have enough tire left to get back by him.
Sunday was another 1st place starting position. This was the most exciting race I have had to date. Two FP cars (a quicker class) were mixing it up right ahead of me, and I had James Blust (Sunday's HP winner) right on me. There were a number of times the four of us were nose to tail. James got by me a couple of times, and I got back by him as well, it was a great battle. At the end I did not have enough left and came home second.
Hopefully once we get the new suspension installed and sorted the car will be a lot easier on its tires. But considering we had stock shocks, some random lowering springs, and the VVT was not working, it was a great outing. Best of all, I have no body panels to replace. 👍
Video later.