Yarisworld Archive

Stay tuned

1,311 posts · 595,379 views · page 18 of 27

Replies continued

Jason@SportsCarThread starterDebary, FL · Sep 13, 2011#851
Originally Posted by ilikerice ↑
I think jason was hoping one was 140*F but wouldn't fit.. I think 160 isnt LOW ENOUGH 😁

I think I may go with the TRD though. Future upgrade eventually. need a water temp. gauge first
Figures... I now have lots of choices. In addition to the Mishimoto 140, and the Cosworth 154, the TRD 160 just showed up. 😆

Now which one do I return.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 13, 2011#852
Originally Posted by Jason@SportsCar ↑
Figures... I now have lots of choices. In addition to the Mishimoto 140, and the Cosworth 154, the TRD 160 just showed up. 😆

Now which one do I return.
with the price of the trd id sent that back first.......
Jason@SportsCarThread starterDebary, FL · Sep 13, 2011#853
Originally Posted by ROCKLAND TOYOTA ↑
with the price of the trd id sent that back first.......
Actually the Cosworth cost more in this case. If you shop you can find the TRD unit for under $100.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 13, 2011#854
Originally Posted by Jason@SportsCar ↑
Actually the Cosworth cost more in this case. If you shop you can find the TRD unit for under $100.
i knew the trd was around 90 bucks BUT im not gonna ask what the cosworth cost....
netz2008chicago · Sep 21, 2011#856
Wow, epic thread. This is giving me some really good ideas!
Jason@SportsCarThread starterDebary, FL · Oct 17, 2011#857
What do you do when you have a small race car... overcompensate with a big trailer. Now with a 29' box we can haul two cars.

Picture not included in this copy
ilikericesavannah, ga · Oct 17, 2011#858
WOW... talk about overkill.. now u can do your engine swaps inside your trailer on those cold winter nights
jekqmbSTL · Oct 17, 2011#859
Jason I think we might have you beat lol....
Here is our Race Trailer, full kitchen, bed, shower, 4 flat screens in it, inside air floor lift, built in 80 gallon air compressor,
Picture not included in this copy
Our Race car, was wrecked last year so its being rebuilt this winter for the next race season, hopefully we will racing the Yaris next year as well and it will get to see the trailer.
Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Oct 17, 2011#860
Yeah, we don't have enough truck to pull that monster.

Originally Posted by jekqmb ↑
Jason I think we might have you beat lol....
Here is our Race Trailer, full kitchen, bed, shower, 4 flat screens in it, inside air floor lift, built in 80 gallon air compressor,
Picture not included in this copy
Our Race car, was wrecked last year so its being rebuilt this winter for the next race season, hopefully we will racing the Yaris next year as well and it will get to see the trailer.
Picture not included in this copy
jekqmbSTL · Oct 17, 2011#861
Haha Yea its like a mobile home, we pull it with our H1 Hummer..... Its overkill, damn thing takes up sooooo much room when its in the shop, it is nice when we have to work on the viper at races though! Tons of room
Jason@SportsCarThread starterDebary, FL · Nov 9, 2011#862
Can't run another year down on power... And no way we are taking a crack at custom cams again.

Jun cams on the way. I sure hope they work. Now do I put them in the old ported head, or start from scratch.

Picture not included in this copy
cali yarisCanoga Park, CA · Nov 9, 2011#863
^ Finally, someone who will be able to tell us how the JUN cams do in real life.

I don't care which head, as long as we have some measure of the difference they make. 👍
Jason@SportsCarThread starterDebary, FL · Nov 9, 2011#864
Originally Posted by cali yaris ↑
^ Finally, someone who will be able to tell us how the JUN cams do in real life.

I don't care which head, as long as we have some measure of the difference they make. 👍
Fingers crossed its not just more money into the R&D pit. 😆 🙁 To save turn around time we are getting another stock head. We will either put them in the old ported head, or have the new one modified when these are fitted.

These are the 9.5mm lift units. Supposed to be here in 7-10days.
racerbLeland, NC · Nov 10, 2011#865
Originally Posted by Jason@SportsCar ↑
What do you do when you have a small race car... overcompensate with a big trailer. Now with a 29' box we can haul two cars.

Picture not included in this copy
This is my race trailer (one day when the car is finished) as it looked the day I brought it home.

Picture not included in this copy
And the only car thats riden in it so far, my NASA PACE-UV, our '98 Rav4!
Picture not included in this copy

racerb 👍
Jason@SportsCarThread starterDebary, FL · Nov 15, 2011#866
What a pisser... It has been nearly a week since payment was sent to Jun, no response. No confirmation of payment, other than from Amex, and no shipping info.

Is this really how the JDM guys do business? 🤷
cali yarisCanoga Park, CA · Nov 15, 2011#867
I had the same trouble just trying to ask questions. Never could extract a meaningful dyno from them. I'm sure they'll just show up without notice.
Jason@SportsCarThread starterDebary, FL · Nov 15, 2011#868
Originally Posted by cali yaris ↑
I had the same trouble just trying to ask questions. Never could extract a meaningful dyno from them. I'm sure they'll just show up without notice.
They were really good with answering questions before I placed the order, ask a question and by the next day I had a response, but nothing now. 👎 They claimed six day shipping, so far I am six days without shipping info.
racerbLeland, NC · Nov 15, 2011#869
Hey Jason, contact Chris Rado at World Racing, he's a Scion Factory driver and has lots of great contacts from JDM to USDM. One of his main supporters is Brian Crower of BC Cams, they make all his custom pieces for his Scions. His site is; http://www.world-racing.com/ , and he is one really great guy to work with.

racerb 🙌
Jason@SportsCarThread starterDebary, FL · Nov 16, 2011#870
Originally Posted by racerb ↑
Hey Jason, contact Chris Rado at World Racing, he's a Scion Factory driver and has lots of great contacts from JDM to USDM. One of his main supporters is Brian Crower of BC Cams, they make all his custom pieces for his Scions. His site is; http://www.world-racing.com/ , and he is one really great guy to work with.

racerb 🙌
I contacted BC a few weeks before ordering the Jun units, I heard a rumor they were going to build Yaris cams, but all they offer is a regrind. We have already been down that road with a well known Runoffs winning engine builder, with limited success. The problem is none of these guys are going to spend the time to develop a cam maximized for our needs - we have rules we need to meet that don't apply to the normal consumer - without a lot of R&D money on our end. Most people won't be shopping for a max lift .390 cam, using stock fuel injection, with limited port work and a stock bottom end. Welcome to Limited Prep Prod class, its a cheap engine build. :)

Buying something like the Jun cams, that supposedly has the R&D behind it, is a less costly investment than starting from scratch. If it works.

It took some poking, but I now have a tracking number. Fingers crossed it all turns out well.
racerbLeland, NC · Nov 17, 2011#871
Good luck Jason, this is one reason I left SCCA for NASA, the rules restrictions were getting to be too much! It only took me about 23 years of beating my head against the wall to figure it out and I was just running IT.

racerb 🤷
Jason@SportsCarThread starterDebary, FL · Nov 17, 2011#872
Originally Posted by racerb ↑
Good luck Jason, this is one reason I left SCCA for NASA, the rules restrictions were getting to be too much! It only took me about 23 years of beating my head against the wall to figure it out and I was just running IT.

racerb 🤷
I guess the 18 years I have been at it are not enough to feel that way. The rules are black and white, and easy to follow. Everyone in my class on my prep line has the same mods, there is no guessing. 👍 The only challenge we face is that we are racing a Yaris, so parts are harder to find. That is not the Club/rules fault.

NASA, forget about it. It would triple my build cost. Screwing around with all the possible points options, no thanks. 👎 Worst of all, lack of competition and tiny fields. Which class was it that had a single car at the Nasa Nationals, PTF or something? *edit, the single car class was PTF in 2010, this year they had three cars. Sorry, but three cars at the biggest event of the year is just sad.
Jason@SportsCarThread starterDebary, FL · Nov 17, 2011#873
Spent a couple hours in Torrance, and now we have a spare head to prep for the new cams. This one only has 1200 miles on it. 😎

Picture not included in this copy
CrankyOldManWest Michigan · Nov 17, 2011#874
Any chance you could take a rubbing of the intake face for some measurements? I'm still not having much luck reverse-engineering the mounting hole dimensions for the outer two bolt holes using only pictures. Lens distortion is a real bastard when trying to project geometry, and the gasket--well, you know. =/
Jason@SportsCarThread starterDebary, FL · Nov 17, 2011#875
Originally Posted by CrankyOldMan ↑
Any chance you could take a rubbing of the intake face for some measurements? I'm still not having much luck reverse-engineering the mounting hole dimensions for the outer two bolt holes using only pictures. Lens distortion is a real bastard when trying to project geometry, and the gasket--well, you know. =/
I will try.

I have a spare intake manifold I could loan you if that helps?
CrankyOldManWest Michigan · Nov 17, 2011#876
Originally Posted by Jason@SportsCar ↑
I will try.

I have a spare intake manifold I could loan you if that helps?
Well, I think a rubbing would be cheaper to mail, but the intake would give me a chance to get the other mounting locations as well. Could you get a shipping quote for 49426?
racerbLeland, NC · Nov 17, 2011#877
Originally Posted by Jason@SportsCar ↑
I guess the 18 years I have been at it are not enough to feel that way. The rules are black and white, and easy to follow. Everyone in my class on my prep line has the same mods, there is no guessing. 👍 The only challenge we face is that we are racing a Yaris, so parts are harder to find. That is not the Club/rules fault.

NASA, forget about it. It would triple my build cost. Screwing around with all the possible points options, no thanks. 👎 Worst of all, lack of competition and tiny fields. Which class was it that had a single car at the Nasa Nationals, PTF or something? *edit, the single car class was PTF in 2010, this year they had three cars. Sorry, but three cars at the biggest event of the year is just sad.
Well maybe after NASA has been around for 60 plus years, we'll have more cars at our Championship weekend. Here in NASA Southeast we don't car count issues, most of our events, Road Atlanta especially draws 375-450 cars. Yes the PT car counts aren't the greatest, but it's still a growing class only about 5 years old with new cars making the move from TT.

The local SCCA regions are loosing IT cars annually, with ITB-ITC almost completely depleated. I raced IT from 1986 to 2000 and was never allowed to relocated my battery, put in NASCAR door bars or install Lexan window. Hell the first few years I couldn't even remove the passenger seat. I like the NASA rule set better, cause I can choose the mods I want and be as stock or modified as I want.

With all the free mods availible, I will most likely only move up one class from base classing, so my '87 Celica GTS which is based as PTF will fit nicely in PTE and be extremely competitive. One thing our guys like about PT here, is they can run TT, PT, or SM and lots are running TT, PT, or Honda Challenge. The Corvette guys really like it cause they can run TT, PT, and ST2 all in the same weekend if they like.

racerb 👏

PS: I used to be a NASA hater, till I made the switch, now every weekend is a joy not a struggle with politics!!
Jason@SportsCarThread starterDebary, FL · Nov 18, 2011#878
Originally Posted by racerb ↑
Well maybe after NASA has been around for 60 plus years, we'll have more cars at our Championship weekend. Here in NASA Southeast we don't car count issues, most of our events, Road Atlanta especially draws 375-450 cars. Yes the PT car counts aren't the greatest, but it's still a growing class only about 5 years old with new cars making the move from TT.

The local SCCA regions are loosing IT cars annually, with ITB-ITC almost completely depleated. I raced IT from 1986 to 2000 and was never allowed to relocated my battery, put in NASCAR door bars or install Lexan window. Hell the first few years I couldn't even remove the passenger seat. I like the NASA rule set better, cause I can choose the mods I want and be as stock or modified as I want.

With all the free mods availible, I will most likely only move up one class from base classing, so my '87 Celica GTS which is based as PTF will fit nicely in PTE and be extremely competitive. One thing our guys like about PT here, is they can run TT, PT, or SM and lots are running TT, PT, or Honda Challenge. The Corvette guys really like it cause they can run TT, PT, and ST2 all in the same weekend if they like.

racerb 👏

PS: I used to be a NASA hater, till I made the switch, now every weekend is a joy not a struggle with politics!!
Whatever floats your boat. It's good that we all have a choice that fits our wants and needs. 🍻
Jason@SportsCarThread starterDebary, FL · Nov 21, 2011#879
Now the fun can start.

Picture not included in this copy
johnny_vitzHamilton, Canada · Nov 21, 2011#880
Yessssssss!!!
Bluevitz-rsOshawa, Ontario, Canada · Nov 21, 2011#881
Did you sort out the communication problem with Jun? Or did it just show up at your door?
Jason@SportsCarThread starterDebary, FL · Nov 21, 2011#882
Originally Posted by Bluevitz-rs ↑
Did you sort out the communication problem with Jun? Or did it just show up at your door?
I think their normal business practice is to just ship it... I was able to get shipping info by escalating it via Paypal.
Bluevitz-rsOshawa, Ontario, Canada · Nov 21, 2011#883
HAHA, oh well, at least you got it.

So are you just doing the cams or are you doing valves too? And have you decided on what head you're putting it into?
Jason@SportsCarThread starterDebary, FL · Nov 21, 2011#884
Originally Posted by Bluevitz-rs ↑
HAHA, oh well, at least you got it.

So are you just doing the cams or are you doing valves too? And have you decided on what head you're putting it into?
The rules allow us to use alternative valves, but we do not get to go bigger as a Level 2 prep car, so there is not much point in replacing them.

I am going to use the head I just pulled last week, all stock with 1200 miles on it. We will port match, deck the head, upgrade the valve springs and do a five angle valve job.
cali yarisCanoga Park, CA · Nov 21, 2011#885
Yum. I really, really want those cams to do something.
racerbLeland, NC · Nov 21, 2011#886
Originally Posted by Jason@SportsCar ↑
Now the fun can start.

Picture not included in this copy
Congrats man, hope it makes the kinda power your looking for!!

racerb 🎉
Jason@SportsCarThread starterDebary, FL · Dec 1, 2011#887
Just picked up the new tow rig from Toyota... Hopefully it fairs a bit better with the two car trailer than my old tired Expedition.

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Dec 1, 2011#888
4.7 or 5.7
Jason@SportsCarThread starterDebary, FL · Dec 1, 2011#889
Originally Posted by Bluevitz-rs ↑
4.7 or 5.7
5.7, 2wd with tow pkg. Rated for 10K, we est our weight will be around 8k loaded.
ROCKLAND TOYOTAROCKLAND COUNTY NY · Dec 2, 2011#890
now wrap it with the old school toyota colors like the yaris....
Jason@SportsCarThread starterDebary, FL · Dec 2, 2011#891
Originally Posted by ROCKLAND TOYOTA ↑
now wrap it with the old school toyota colors like the yaris....
The rolling billboard is not my preferred method of travel. 😆 That, and I bet it would cost a fortune to wrap something that big.
racerbLeland, NC · Dec 5, 2011#892
Originally Posted by Jason@SportsCar ↑
Just picked up the new tow rig from Toyota... Hopefully it fairs a bit better with the two car trailer than my old tired Expedition.

Picture not included in this copy
That's going to be my next truck. My 2001 Tundra is pushing 200,000 miles and is still towing my 20'x8 1/2' Haulmark trailer with no trouble, 4.7 engine has been plenty strong!

racerb 🎉
Jason@SportsCarThread starterDebary, FL · Dec 6, 2011#893
Garm is an evil man... He captured a unicorn and sold it to us - he knew we could not resist. We now have a close-ratio gear set for the C50. 👍 Who would have thought such a thing even existed. 🤤

In the next week I will be taking our spare trans to be fitted with the new 3rd, 4th and 5th gears, and a fresh OS Giken Super Lock LSD, so we can do a complete swap into the car.

The new ratios are sick, so short in fact we are going to have to use the Yaris FD (3.7), the xB (4.3) is way to short.

The old setup was just not getting it done... The 4.3 FD with the 15" tires was a dog, the car just could not pull out of the tight stuff. The 4.3 FD with the 13" tires was an improvement on tight tracks. But we actually found when looking at our post Runoffs data, that even though the car got up to speed quicker, our top speed was no better - this setup required the use of 5th gear far to much, which is just to much OD for the car to pull.

With the new setup our 5th gear is almost equal to the stock 4th.

OE
1st 3.545
2nd 1.904
3rd 1.310
4th 0.969
5th 0.815

Close-ratio (1st and 2nd go unchanged)
3rd** 1.474
4th** 1.208
5th** 0.961

Our stock trans had a 2300rpm drop from 2nd to 3rd, and 1900rpm from 3rd to 4th. With the new setup we only drop 1500rpm from 2nd to 3rd (this will be huge), and 1300rpm from 3rd to 4th. This makes it much easier to stay on peak power. Additionally, where we typically would only use two to three gears per track in the stock box, we will now use three to four gears. The gear multiplication should make for much better acceleration, and 5th gear at 7300rpm is 122mph, perfect for Road America.

It all looks sweet on paper, now we just need to make it fit and try it.

The rules will hit us with a 50lb weight penalty for alternative trans ratios, but since the car is still overweight we wont have to actually add anything.

Talking to the Honda guys we race against, the Mugen close-ratio they run is worth an average of 2sec a lap at most tracks. If that holds true for this gear set, it will big a bigger improvement in lap times than the engine work was.

Picture not included in this copy
cali yarisCanoga Park, CA · Dec 6, 2011#894
Guilty as charged! I plead need for speed!
CrankyOldManWest Michigan · Dec 6, 2011#895
Originally Posted by Jason@SportsCar ↑
Garm is an evil man... He captured a unicorn and sold it to us - he knew we could not resist. We now have a close-ratio gear set for the C50. 👍 Who would have thought such a thing even existed. 🤤
Oh my, I think I'm nursing a semi...
In the next week I will be taking our spare trans to be fitted with the new 3rd, 4th and 5th gears, and a fresh OS Giken Super Lock LSD, so we can do a complete swap into the car.
Does that mean that your "spare" gearbox will not be available anymore? Or is this the swap you had alluded to before?
Close-ratio (1st and 2nd go unchanged)
3rd** 1.474
4th** 1.208
5th** 0.961
It's like mathematical pr0n!
Our stock trans had a 2300rpm drop from 2nd to 3rd, and 1900rpm from 3rd to 4th. With the new setup we only drop 1500rpm from 2nd to 3rd (this will be huge), and 1300rpm from 3rd to 4th. This makes it much easier to stay on peak power.
That's the biggest reason that I'm attempting my custom box: terrible acceleration from 15-20 mph because of the RPM drop from 1st to 2nd. I'm staying N/A for the time being, so I don't need these ratios, but it's great to know that there are now some real options other than buying whole used transmissions to scavenge parts. I'm assuming that the gears will come as a complete pair (roller bearings, synchros) sans hub?
Jason@SportsCarThread starterDebary, FL · Dec 6, 2011#896
Originally Posted by CrankyOldMan ↑
Oh my, I think I'm nursing a semi...

Does that mean that your "spare" gearbox will not be available anymore? Or is this the swap you had alluded to before?

It's like mathematical pr0n!

That's the biggest reason that I'm attempting my custom box: terrible acceleration from 15-20 mph because of the RPM drop from 1st to 2nd. I'm staying N/A for the time being, so I don't need these ratios, but it's great to know that there are now some real options other than buying whole used transmissions to scavenge parts. I'm assuming that the gears will come as a complete pair (roller bearings, synchros) sans hub?
It is the one I had mentioned, this should eventually free up my original case for your project.

I don't find the 1-2 drop to be that bad, because the total ratio in 2nd still allows for good acceleration - assuming you have done the xB FD or run 13" tires. 😉

We are N/A, I would be less incline to search for gearing advantage if we had big power, all of this effort is to make up for a lack of power. 😆

My area of expertise when it comes to transmission is pulling it out of the car. The kit came with six gears, input and output side for 3rd, 4th and 5th. No bearings, at least not in the form I am use to seeing them in, but they do look like they have a synchro on the appropriate pieces. (note the gear on the right of the image)

Picture not included in this copy
cali yarisCanoga Park, CA · Dec 6, 2011#897
We are N/A, I would be less incline to search for gearing advantage if we had big power, all of this effort is to make up for a lack of power.
Makes sense. But the final drive is for EVERYONE. 😁
Jason@SportsCarThread starterDebary, FL · Dec 6, 2011#898
Originally Posted by cali yaris ↑
Makes sense. But the final drive is for EVERYONE. 😁
Right... What I was getting at is I would not worry about close ratios if I had Tq. But the car is geared to tall on its own no matter the output, you got to do something to pep it up. The FD is the quick and easy shot that gets you most of the way there. 😎
CrankyOldManWest Michigan · Dec 6, 2011#899
Originally Posted by Jason@SportsCar ↑
The FD is the quick and easy shot that gets you most of the way there.
Wait, since when does a full teardown and rebuild of a transmission fall into "quick" or "easy"? 😁
Jason@SportsCarThread starterDebary, FL · Dec 8, 2011#900
Yummy... More Jongbloed wheels. 13x7, 8lbs 5oz. Now which set goes on which car??? I think these might need to go on the 99. 😁

Picture not included in this copy