Yarisworld Archive

Stay tuned

1,311 posts · 595,379 views · page 16 of 27

Replies continued

Jason@SportsCarThread starterDebary, FL · Apr 28, 2011#751
Originally Posted by cali yaris ↑
This looks like it will work pretty well. Does squeezing the hoses restrict airflow? Can you have them terminate right behind that grill? Does that grill have to be there?
I tried to squeeze them as little as possible, which is why the grill is a little deformed in that area, but the volume should be the same.

If I would have put them behind the grill, which was my original plan, the grill would have blocked some of the tube.

The front bumper has to "resemble" the stock one, so I would say that it does need to have the beams.
nemesiszMiramar · Apr 29, 2011#753
Originally Posted by HTM Yaris ↑
The Mitsubishi EVO VIII had channel like ducts that attached on lower control arm . Don't know if it would be legal for your app , just an idea .
Just to expand on this idea. I was tossing this around for a little while. It seems to be popular with the newer EVO guys to retrofit these on their control arms.

Porsche 996 GT3 brake ducts (See posts 23 and 27)

Although I have found that the 993 brake ducts are a bit better fit size wise and not too expensive. You can get them from Pelican Parts for about $28. The part number is 993.341.083.00. A pair of these, maybe an xacto knife and some zip ties and you should be good to go.

Just an idea.
YarisPRMayaWest, Puerto Rico · Apr 30, 2011#754
Is it allowed to use the foglight's base (the ones that hold the fog lights) to put the hose for the air ducts? Or does it have a negative effect?
AstromanWenatchee, WA · Apr 30, 2011#755
I had the foglight housing modified on my original OEM front bumper (drivers side), cutting out the "blocked" area for my AEM intake. Made a -10 degree (f) difference according to the intake temp on my scangauge.

PS- I love this thread!
Jason@SportsCarThread starterDebary, FL · May 2, 2011#756
http://www.scca.com/newsarticle.aspx?hub=1&news=4096

This past weekend we took the Yaris up to Buttonwillow for the Cal Club Double National and BFGoodrich Tires Super Tour, the results: One pole, two wins and the H Prod track record (2:10.683) now belong to the Yaris.

The weekend was not without excitement... In Sunday qualifying I pushed a little to hard, resulting in an off that took out the belly pan and part of the bumper support. A bit of thrashing before the race and everything was back in shape. Starting second I got a great jump on the pole sitter, Gary Wittman, and never looked back. On Lap 8 I went a bit to hot over Phil Hill, launching the car off the track at the turns exit, the nose dug in the dirt but the car was able to motor on to the win by 12 seconds over Wittman.

So far in 2011: five poles, four wins, two runner-ups. Things are looking great for repeat of the Divisional Championship.

Not much excitement on Saturday, started from the pole and never really had to race anyone. I will post a Sunday video as soon as I get it together.
cali yarisCanoga Park, CA · May 2, 2011#757
Great results! Do these races have a rolling start, or from a complete stop?
thebarberGrand Rapids, MI · May 2, 2011#758
congratulations jason!
SailDesign. · May 2, 2011#759
Congrats, Jason- great article in the latest SportsCar, too (finally arrived....)
Jason@SportsCarThread starterDebary, FL · May 2, 2011#760
Originally Posted by cali yaris ↑
Great results! Do these races have a rolling start, or from a complete stop?
Rolling start, typically around 40-50mph, depending on who is setting the pace.

I really thought with all the slow turns Buttonwillow was going to be a terrible track for the Yaris, but with xB gear and 13" tires the car was always in the power.
Bluevitz-rsOshawa, Ontario, Canada · May 2, 2011#762
Jay, you need to lower the camera a bit. You can't see anything.
Jason@SportsCarThread starterDebary, FL · May 2, 2011#763
Originally Posted by Bluevitz-rs ↑
Jay, you need to lower the camera a bit. You can't see anything.
I had a new camera to try this weekend... But the damn thing came with no instructions and I could not figure it out. Luckily I had my trusty Go Pro in my bag. I like the angle of the roof mount, and I tried to lower a bit this time by adding an extension, but it is way to shaky and still to high up. 🙁
ShinareOklahoma City, OK · May 2, 2011#764
Originally Posted by Bluevitz-rs ↑
Jay, you need to lower the camera a bit. You can't see anything.
I was thinking the same thing. Can't see much, but still love it! Keep up the good work.
soloecho2Orono, Ontario · May 2, 2011#765
Holy cow I can't believe there is that much flex in a car with a full cage !!
I thought I was watching through a fun house mirror.
Just kidding. The vid was great.
I guess the cars ahead were a different class and they had longer legs for the straiter sections of the track ?
Anyway keep up the good work you are doing us all PROUD !!
Jason@SportsCarThread starterDebary, FL · May 2, 2011#766
Originally Posted by soloecho2 ↑
Holy cow I can't believe there is that much flex in a car with a full cage !!
I thought I was watching through a fun house mirror.
Just kidding. The vid was great.
I guess the cars ahead were a different class and they had longer legs for the straiter sections of the track ?
Anyway keep up the good work you are doing us all PROUD !!
"Flex", what do you think you are seeing? Don't mistake what the camera is doing for a chassis issue. btw the camera is not mounted to the cage, that is on a sticky foot attached to the inside of the roof.

It was a four car train... Note: If you are a newbie do not start with a 400hp T1 Corvette, you only look stupid when you are holding up a bunch of "slower" cars. Next in line was a T3 RX-8, then the SSB Honda Civic and me bringing up the rear. The four of us ran lap times that were about the same, all around 2:10s. You can see how the cars on DOT race tires with power make time on the striats, and I make it up in the turns - slicks are great. 👍

Once I had a decent gap on the second place HP car I slowed to a 2:12 pace, with the idea that I might stay on the track if I did not take any more chances. 😁
Jason@SportsCarThread starterDebary, FL · May 2, 2011#767
This should buff right out... Or maybe its time to order a new one.

Picture not included in this copy
eTiMaGoBangkok, Thailand · May 2, 2011#768
It's plastic, it should pop right back out :D
soloecho2Orono, Ontario · May 3, 2011#769
It was ment as a joke about the camera image. Thanks for the info on the other cars. Keep up the good work.
Jason@SportsCarThread starterDebary, FL · May 4, 2011#770
Originally Posted by soloecho2 ↑
It was ment as a joke about the camera image. Thanks for the info on the other cars. Keep up the good work.
OK. Someone else made a similar comment, so I thought I was missing something in the video. 😆
Jason@SportsCarThread starterDebary, FL · May 5, 2011#772
New part to test fit this weekend:

Picture not included in this copy
rob323Joyner, Brisbane · May 5, 2011#773
Which mount are these on a Yaris? Echo's don't have anything like that.
Jason@SportsCarThread starterDebary, FL · May 5, 2011#774
Originally Posted by rob323 ↑
Which mount are these on a Yaris? Echo's don't have anything like that.
From the cross member to the bottom of the trans.

If it works good, and if the math $$$$ works out, Energy Suspension might put these into production.
rob323Joyner, Brisbane · May 5, 2011#775
Hmm, I wonder if this is an upgrade I can make on my echo cause that rear roll stopper cops an absolute hiding.
cali yarisCanoga Park, CA · May 5, 2011#776
Energy Suspension will have to compete with TRD on that one. I would stock theirs if the price is right -- and they call.
why?harnett county NC · May 7, 2011#777
Originally Posted by Jason@SportsCar ↑
This should buff right out... Or maybe its time to order a new one.

Picture not included in this copy
i love that image. Safe Racer with the nice dent in it.👍

So a question, how much of your success is the Yaris, and how much is your experience? Is the Yaris really as good as you make it seem, or are you manhandling the crap out of it to make it perform?
Jason@SportsCarThread starterDebary, FL · May 13, 2011#778
Originally Posted by why? ↑
So a question, how much of your success is the Yaris, and how much is your experience? Is the Yaris really as good as you make it seem, or are you manhandling the crap out of it to make it perform?
Early on it was all about manhandling the crap out of the car... Now that the cars is getting faster I have to do less work.
Jason@SportsCarThread starterDebary, FL · May 13, 2011#779
Another item to put on the to do list. Going to try the 170 degree thermostat from the MR-2 Spyder. Dimensionally is measures the same as the Yaris part - and the Yaris uses the same standard part as the Spyder - so hopefully it works.

$10 VS $75+ for the TRD Japan part. 👍

I probably wont install it until we put the new motor in.

Picture not included in this copy
thebarberGrand Rapids, MI · May 13, 2011#780
good info
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · May 13, 2011#781
my catalog says yaris and mr2 spyder thermostats are NOT the same!

the yaris shares same part # as all the 1nz motors and supra and 2.7 liter tacomas.

the mr2 spyder shares part #'s with camry, matrix,highlander,etc....
Jason@SportsCarThread starterDebary, FL · May 13, 2011#782
Since I have the spare motor sitting in the garage I may try and test fit it this weekend, I just wont have a chance to track test it.

btw... It is a Stant 14077 if anyone else wants to try it. Obviously you are at the mercy of the electric fans in a street car, so you will see little if any change except at freeway speed.

I looked into it because of the higher temps we are seeing now. With the 15" wheel/tire combo the car did not rev as quickly, and the temps stayed right around 200. Now with the 13"s the cars revs quicker, and maintains a higher average RPM, this has driven the temps up around 210. Hopefully this does the trick.
Jason@SportsCarThread starterDebary, FL · May 13, 2011#783
Originally Posted by ROCKLANDTOYOTA ↑
my catalog says yaris and mr2 spyder thermostats are NOT the same!

the yaris shares same part # as all the 1nz motors and supra and 2.7 liter tacomas.

the mr2 spyder shares part #'s with camry, matrix,highlander,etc....
Stant lists the 48308 (OE style 180 degree) as fitting the Yaris and 05' Spyder, along with a dozen or so other cars. 🤷

This is why we test stuff. Fingers crossed.

http://stant.com/common/part_locator...m.cfm?id=48308
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · May 13, 2011#784
Originally Posted by Jason@SportsCar ↑
Stant lists the 48308 (OE style 180 degree) as fitting the Yaris and 05' Spyder, along with a dozen or so other cars. 🤷

This is why we test stuff. Fingers crossed.

http://stant.com/common/part_locator...m.cfm?id=48308
HOPEFULLY it works!!!
Jason@SportsCarThread starterDebary, FL · May 13, 2011#785
Well it fits in the hole... wont know if it works for a few weeks.



Picture not included in this copy
ilikericesavannah, ga · May 14, 2011#786
very interesting.. i love this thread..
Blown_xaVirginia · May 16, 2011#787
What pads do use for the track? I run into brake fade issues after just a few laps on Hawk hp+. What our your current spring rates? I bumped up my front rates after removing sway and fight instability during high speed braking , but it rotates fine eveywhere else now.
Jason@SportsCarThread starterDebary, FL · May 17, 2011#788
Originally Posted by Blown_xa ↑
What pads do use for the track? I run into brake fade issues after just a few laps on Hawk hp+. What our your current spring rates? I bumped up my front rates after removing sway and fight instability during high speed braking , but it rotates fine eveywhere else now.
We are currently using Carbotech XP10 in the front, with stock shoes in the rear. Zero fade, and we have been using this same set pretty much since we built the car - we tried a few other sets at some test days, but ended up going back to the XP10 for all of the races.
I am not a big fan of Carbotech (long story), so I have been trying to get our friends at Hawk to build Yaris pads. So far no luck, but if the B-Spec class generates enough interest we might be able to convince them.

Current rates are 550lbs front, 650lbs rear. Using the smaller sedan front bar, this is a recent change, and it made a big difference from the center of the turn out.👍 No rear bar.
thebarberGrand Rapids, MI · May 17, 2011#789
i have carbotech's too (im not sure which model, i got them from echo_hrs)....they're squaky and dusty on the street (which my wife loves) but man do they ever grip w/o fade on the track...
Blown_xaVirginia · May 17, 2011#790
Originally Posted by Jason@SportsCar ↑
We are currently using Carbotech XP10 in the front, with stock shoes in the rear. Zero fade, and we have been using this same set pretty much since we built the car - we tried a few other sets at some test days, but ended up going back to the XP10 for all of the races.
I am not a big fan of Carbotech (long story), so I have been trying to get our friends at Hawk to build Yaris pads. So far no luck, but if the B-Spec class generates enough interest we might be able to convince them.

Current rates are 550lbs front, 650lbs rear. Using the smaller sedan front bar, this is a recent change, and it made a big difference from the center of the turn out.👍 No rear bar.
I appreciate the info!
why?harnett county NC · May 17, 2011#791
Originally Posted by Jason@SportsCar ↑
We are currently using Carbotech XP10 in the front, with stock shoes in the rear. Zero fade, and we have been using this same set pretty much since we built the car - we tried a few other sets at some test days, but ended up going back to the XP10 for all of the races.
I am not a big fan of Carbotech (long story), so I have been trying to get our friends at Hawk to build Yaris pads. So far no luck, but if the B-Spec class generates enough interest we might be able to convince them.

Current rates are 550lbs front, 650lbs rear. Using the smaller sedan front bar, this is a recent change, and it made a big difference from the center of the turn out.👍 No rear bar.
No rear bar? People around here swear by the rear bar. Of course then I doubt they are running rates like that. The sedan front sway bar is smaller? I wonder if I can pick one up used.
dingbatMid-Turn (probably late apexing) · May 18, 2011#792
Originally Posted by Jason@SportsCar ↑

Current rates are 550lbs front, 650lbs rear. Using the smaller sedan front bar, this is a recent change, and it made a big difference from the center of the turn out.👍 No rear bar.
Mind sharing what dampeners you're using?
Apologies if you've already said and I missed it.
dingbatMid-Turn (probably late apexing) · May 18, 2011#793
Originally Posted by why? ↑
No rear bar? People around here swear by the rear bar. Of course then I doubt they are running rates like that. The sedan front sway bar is smaller? I wonder if I can pick one up used.
Four of the fastest SoloII VWs I've known of used no rear bar and a massive front bar. A Rabbit, a Scirocco, and two Jettas - very similar to the Yaris in suspension, power, weight, and weight distribution. There's more to the equation than just the bars but the conventional wisdom of small bar front, big bar back may make the car easier to drive, but doesn't necessarily make it fast.
ilikericesavannah, ga · May 18, 2011#794
agreed with that guy ^

after i put my rear sway bar on (UR 23mm) i honestly didnt notice a huge change with my autocross runs. I felt it a little, but not enough to say "DAYUM".. but it looks good.

i think my best mod are coilovers and tires.
Jason@SportsCarThread starterDebary, FL · May 18, 2011#795
The AST-USA http://www.ast-usa.com/ rear shocks we had built are shorter than stock, and have droop limiters, so a bar is not really effective on our car. If you jack up a typical Yaris the rear suspension may droop 3-4 inches, ours only goes down 1", so it tries to pick up the rear tire well before a bar would have much effect.

A rear bar helps free the car up on corner entry, but once you pick up the throttle and the rear settles down the bar is not doing much.

On the road race car if you free it up too much on entry the car can be nervous, and you might spend the first part of the turn chasing the tail. In an autocross environment the transitions happen so quickly, and the speeds are lower, so it is a more effective tuning aid.

It also doesn't hurt that my preference is a tight car, it is much easier to correct. A loose car expends way to much energy going sideways, energy that is no longer driving you forward.

Many cars see a benefit from a bigger front bar for Solo. It helps RWD cars put down power, and transition quickly. On strut FWD/AWD cars it helps to prevent camber loss, so even though it is counter intuitive it actually helps corner speed.

But (imho) for the most part swaybars are a band-aid for the wrong springs. Of course this depends on who's school of thought you want to subscribe to... One camp believes that soft springs make a more compliant suspension, that soaks up track surface imperfections, and you use big bars to control roll. The other guys believe swaybars try to take away grip by lifting the inside tires, so you use stiff springs to control body roll, and minimal bars to tune balance.

I like both... On a Solo car, where you only get three runs and the surface is usually crap, I like a car that is soft and forgiving. You wont get a perfect run with only three shots, so make the car easy to drive. On the track you have a lot of laps to figure it out, even if you screw up a lap you have a lot of chances to make it back up, so a stiff car works good here.
why?harnett county NC · May 18, 2011#796
Originally Posted by dingbat ↑
Four of the fastest SoloII VWs I've known of used no rear bar and a massive front bar. A Rabbit, a Scirocco, and two Jettas - very similar to the Yaris in suspension, power, weight, and weight distribution. There's more to the equation than just the bars but the conventional wisdom of small bar front, big bar back may make the car easier to drive, but doesn't necessarily make it fast.
I wouldn't call them similar to the Yaris though. Maybe in concept, but the feel is just so much different. Plus does a Scirocco really have a torsion bar rear?

I'm still just grasping suspension tuning and what it really does. But I bet driver skill had a ton to do with it too.
dingbatMid-Turn (probably late apexing) · May 18, 2011#797
Originally Posted by why? ↑
I wouldn't call them similar to the Yaris though. Maybe in concept, but the feel is just so much different. Plus does a Scirocco really have a torsion bar rear?
Having owned and raced a '79 Scirocco, and owned (for an admittedly short time now) a 2010 Yaris 3 door, I think the cars feel very similar, except for driver position, which will affect location of the center of mass. My own opinion of course, but I think what works for one, will work for the other when talking in basic concepts.
Yes, to the best of my knowledge, all the A1 chassis VWs had torsion bar rear ends. My '79 Scirocco did, and so did every A1 chassis I've ever been under. Maybe not the pickups?

Originally Posted by why? ↑
I'm still just grasping suspension tuning and what it really does. But I bet driver skill had a ton to do with it too.
Always correct.
Same drivers however were faster in the setup I'm referring to than in a "conventional" setup in the same car. One of the cars ran in stock class and won SCCA Solo II nationals. May have even been both drivers, one male one female. The other cars have made very good showings nationally and divisionaly. Point being, they were competing against excellent drivers to start with.

And forgive me, I was talking specifically about the A1 chassis in my post above. I should have been clear about that.
Jason@SportsCarThread starterDebary, FL · May 18, 2011#798
Originally Posted by dingbat ↑
Always correct.
Same drivers however were faster in the setup I'm referring to than in a "conventional" setup in the same car. One of the cars ran in stock class and won SCCA Solo II nationals. May have even been both drivers, one male one female. The other cars have made very good showings nationally and divisionaly. Point being, they were competing against excellent drivers to start with.

And forgive me, I was talking specifically about the A1 chassis in my post above. I should have been clear about that.
Many years ago Bob and Patty Tunnell ran a Jetta Wolfsburg very successfully (1992 ES/ESL Champions) in stock class... I seem to recall the running joke was their front swaybar was from a Winnebago.
dingbatMid-Turn (probably late apexing) · May 18, 2011#799
Originally Posted by Jason@SportsCar ↑
Many years ago Bob and Patty Tunnell ran a Jetta Wolfsburg very successfully (1992 ES/ESL Champions) in stock class... I seem to recall the running joke was their front swaybar was from a Winnebago.
That's the one......"Mongo".👏

I was told the bar was custom made at an RV shop out of stock normaly used for RV swaybars. Though I don't know the exact dimensions, it was suposedly "as big as a baby's arm". My friend in town here, who is using a setup that decended from ideas inspired by the Tunnell's Jetta, runs a front bar off a Pontiac Firebird that is over 30mm.
Jason@SportsCarThread starterDebary, FL · May 31, 2011#800
Not much going on with the Yaris right now, for the most part our National racing season winds down this time of year, so we have a few months to prep for the Runoffs.

Had a little time to kill after watching Indy, so I installed the new Energy Suspension engine/trans mount:

Picture not included in this copy