Yarisworld Archive

Stay tuned

1,311 posts · 595,379 views · page 20 of 27

Replies continued

cali yarisCanoga Park, CA · Jan 23, 2012#951
I heard good things happened this weekend... 😁
Jason@SportsCarThread starterDebary, FL · Jan 30, 2012#952
Progress... Loynings head with Jun cams mated to the block. 🤤 If I did not like my neighbors I would fire it up and do the break-in tonight. It will just have to sit till the weekend.

Picture not included in this copy
33OHDover, Ohio · Jan 30, 2012#953
We're not worthy. 🙇
Jason@SportsCarThread starterDebary, FL · Feb 2, 2012#954
Just got the car back together. Tomorrow we make noise.
Jason@SportsCarThread starterDebary, FL · Feb 2, 2012#955
It's alive. Now to schedule some dyno time.
thebarberGrand Rapids, MI · Feb 2, 2012#956
does it feel more powerful?
Jason@SportsCarThread starterDebary, FL · Feb 2, 2012#957
Originally Posted by thebarber ↑
does it feel more powerful?
My butt dyno could not tell as I sat in the car with the engine revving between 2000-3000 for half an hour breaking in the cams.

We cant exactly drive this on the street. 😉 The dyno will show the difference, as will laps at Willow Springs during the next race.
Jason@SportsCarThread starterDebary, FL · Feb 3, 2012#958
On the dyno next Tuesday. 🤤
cali yarisCanoga Park, CA · Feb 3, 2012#959
Excellent. Finally. Thank you.
ilikericesavannah, ga · Feb 3, 2012#960
Sorry, could you run by what else is done to this motor also along with the jun cams? Just as a reference.
Jason@SportsCarThread starterDebary, FL · Feb 6, 2012#961
Originally Posted by ilikerice ↑
Sorry, could you run by what else is done to this motor also along with the jun cams? Just as a reference.
The Production class rules are fairly restrictive to the newer cars like ours, but we can still open it up a little: intake/exhaust ports opened up to match intake/header to a depth of 1". Multi angle valve job. Head decked to get us closer to our 11-1 max compression ratio.
thebarberGrand Rapids, MI · Feb 6, 2012#962
how much did you have to take off the head?
Jason@SportsCarThread starterDebary, FL · Feb 6, 2012#963
Originally Posted by thebarber ↑
how much did you have to take off the head?
I have not seen the build sheet/bill yet. 🤷 Without being able to CC everything (I did not send the bottom end so they could not measure the piston volume) I am sure they went conservative. I know the pistons don't slap the valves, happy about that. 👍
thebarberGrand Rapids, MI · Feb 6, 2012#964
Originally Posted by Jason@SportsCar ↑
I have not seen the build sheet/bill yet. 🤷 Without being able to CC everything (I did not send the bottom end so they could not measure the piston volume) I am sure they went conservative. I know the pistons don't slap the valves, happy about that. 👍
lol
Jason@SportsCarThread starterDebary, FL · Feb 8, 2012#965
The results are in, the Jun cams are an improvement over the custom grind we had done for the 2010 season, but they are not magic.

With the combination of head work and cams we picked up 12hp when compared to the stock engine we ran in 2011. However, just like with the custom grind cams we lost Tq below 5000rpm when compared to the stock engine - fortunately in this case we only lost 3ft-lbs, where the 2010 cams lost around 18ft-lbs.

While I was not jumping for joy at the final numbers, I was happy to see the top end power match our 2010 numbers, while regaining most of our lost Tq. Additionally, the power band with the Jun cams is much broader than the custom grind was, we have nearly 1000 more usable RPMs than we did before. From 5500rpm on we have more HP and Tq than either of the previous setups offered, and the power delivery is smooth.

If you are thinking about the Jun 9.5 cams keep in mind these are not a direct bolt-in. Your head will need relief cuts to clear the lobes, and without engine management you will not see the full gains.

Overall I give them a thumbs up, but expect to spend about $2k between the cams and head work.

Picture not included in this copy
CrankyOldManWest Michigan · Feb 8, 2012#966
So this--combined with reverting the final drive--should make you much more competitive than last season? How's the gearbox coming along?
ilikericesavannah, ga · Feb 8, 2012#967
On behalf of everyone at yarisworld, thank you. lol
Jason@SportsCarThread starterDebary, FL · Feb 8, 2012#968
Originally Posted by CrankyOldMan ↑
So this--combined with reverting the final drive--should make you much more competitive than last season? How's the gearbox coming along?
The car still wont be a front runner in the dry, but it should be faster than the last two years.

Still waiting on the close ratio gear box.
Jeff@MicroImageSFV, CA · Feb 8, 2012#969
Are you still running VVT-i in this car? Does your tuner/management have control over the that?
Jason@SportsCarThread starterDebary, FL · Feb 8, 2012#970
Originally Posted by Jeff@MicroImage ↑
Are you still running VVT-i in this car? Does your tuner/management have control over the that?
Yes, still running it and the AEM controls it.
Jeff@MicroImageSFV, CA · Feb 8, 2012#971
Originally Posted by Jason@SportsCar ↑
Yes, still running it and the AEM controls it.
Great results! I'm real excited to see that these actually work. I'd be curious to see if any top end gains or benefit from disabling VVT-i and running set or manually adjustable cam gears. Might loose more torque though...

Can't wait to see what the turbo spec Jun cams do for boosted cars 🤘
Jason@SportsCarThread starterDebary, FL · Feb 8, 2012#972
Originally Posted by Jeff@MicroImage ↑
Great results! I'm real excited to see that these actually work. I'd be curious to see if any top end gains or benefit from disabling VVT-i and running set or manually adjustable cam gears. Might loose more torque though...

Can't wait to see what the turbo spec Jun cams do for boosted cars 🤘
The low end gets really weak with no VVT-i control.
racerbLeland, NC · Feb 8, 2012#973
Originally Posted by Jason@SportsCar ↑
The results are in, the Jun cams are an improvement over the custom grind we had done for the 2010 season, but they are not magic.

With the combination of head work and cams we picked up 12hp when compared to the stock engine we ran in 2011. However, just like with the custom grind cams we lost Tq below 5000rpm when compared to the stock engine - fortunately in this case we only lost 3ft-lbs, where the 2010 cams lost around 18ft-lbs.

While I was not jumping for joy at the final numbers, I was happy to see the top end power match our 2010 numbers, while regaining most of our lost Tq. Additionally, the power band with the Jun cams is much broader than the custom grind was, we have nearly 1000 more usable RPMs than we did before. From 5500rpm on we have more HP and Tq than either of the previous setups offered, and the power delivery is smooth.

If you are thinking about the Jun 9.5 cams keep in mind these are not a direct bolt-in. Your head will need relief cuts to clear the lobes, and without engine management you will not see the full gains.

Overall I give them a thumbs up, but expect to spend about $2k between the cams and head work.

Picture not included in this copy
As a long time racer of low horsepower front drive cars, any gains with restrictive rules are a real plus. Learning how to get the most out of the loose nut behind the wheel, can actually make the biggest difference. Just look back in history at what those early racers did with the first Mini Coopers, cars that might have had 40 hp and tiny, skinny as hell tires. When you get to the point where your getting the most out of you the driver, then horsepower numbers aren't as big a factor in all out speed!!

racerb
KSIbuckyFond du Lac, WI · Feb 17, 2012#974
From runoffs

2 attachments not included in this copy

Jason@SportsCarThread starterDebary, FL · Feb 17, 2012#975
Off to Willow Springs tomorrow, testing radial slicks on the 99.
Jason@SportsCarThread starterDebary, FL · Mar 13, 2012#976
We are making progress on the Kaaz close-ratio gear set. Kaaz USA was able to track down the synchros we need, and are making modifications to two of the gears for a proper fit. 👍 They have already successfully built one trans for the Scion rally team, and are working on our gears right now. We should have all the parts in hand before the end of the week.

I would imagine that means I will spend my weekend in the place I am getting way to familiar with, on the floor pulling a trans out.
CrankyOldManWest Michigan · Mar 13, 2012#977
Wow, I'm surprised to hear that there's so much involved in fitting those gears. The C-56 gears went in without much fuss, but I'm stalled on funding for replacement parts and the LSD.
Jason@SportsCarThread starterDebary, FL · Mar 14, 2012#978
Originally Posted by CrankyOldMan ↑
Wow, I'm surprised to hear that there's so much involved in fitting those gears. The C-56 gears went in without much fuss, but I'm stalled on funding for replacement parts and the LSD.
It is odd, these were supposedly built for the C56. Are you pulling parts out of a C56 A or B? Could be the difference. 🤷

Turns out the gear itself is not to wide, but the collar at its base, that combined with the Yaris synchro made it bind up. And it is only the 3rd and 4th on the input side that is the challenge. They take a little bit off the collar and install the Celica/MR-S synchro its supposed to fit.

Fingers crossed.
racerbLeland, NC · Mar 14, 2012#979
Back in my Honda racing days this guy was the man for alternate gear sets, he can probebly help you out if need be. He is a multi-time SCCA Champ and really knows a thing or two about gearboxes.
http://www.housemanautosport.com/

racerb 🎉
Jason@SportsCarThread starterDebary, FL · Mar 14, 2012#980
Originally Posted by racerb ↑
Back in my Honda racing days this guy was the man for alternate gear sets, he can probebly help you out if need be. He is a multi-time SCCA Champ and really knows a thing or two about gearboxes.
http://www.housemanautosport.com/

racerb 🎉
He was the first person I talked to when we started looking for gears two years ago. He was willing to make a custom final drive, but we found the xB gear fit at a fraction of the cost. He had no interest in doing the dog engagement trans that I wanted.
CrankyOldManWest Michigan · Mar 15, 2012#981
Originally Posted by Jason@SportsCar ↑
It is odd, these were supposedly built for the C56. Are you pulling parts out of a C56 A or B? Could be the difference. 🤷

Turns out the gear itself is not to wide, but the collar at its base, that combined with the Yaris synchro made it bind up. And it is only the 3rd and 4th on the input side that is the challenge. They take a little bit off the collar and install the Celica/MR-S synchro its supposed to fit.

Fingers crossed.
I'm afraid you've got me stumped on that one. I didn't realize there were two C56 variants, or at least that there were significant internal differences between the front and rear mounted versions.
racerbLeland, NC · Mar 16, 2012#982
Originally Posted by CrankyOldMan ↑
I'm afraid you've got me stumped on that one. I didn't realize there were two C56 variants, or at least that there were significant internal differences between the front and rear mounted versions.
Toyota must have a big range of different gearbox versions, my S-53 is fairly common, but I ended up with a JDM box and can't find syncros or shims to fit it! Would love to find an alternate final drive, the 4.18 is just not working for our longer tracks here in the East.

racerb 🤷
Jason@SportsCarThread starterDebary, FL · Mar 16, 2012#983
Originally Posted by CrankyOldMan ↑
I'm afraid you've got me stumped on that one. I didn't realize there were two C56 variants, or at least that there were significant internal differences between the front and rear mounted versions.
C56A open diff
C56B LSD

You may actually have the same problem we did and not know it yet if you have not put it back together. You wont know until you jam it all in the case and measure the drag when you spin it.
CrankyOldManWest Michigan · Mar 16, 2012#984
It's definitely a C56A then, as it's an open diff. The assembly goes together at the moment, but I haven't checked the torque yet. I have to replace the output shaft inner bearing (the one in the bell housing) because the C56 has an inner race on the roller bearing, whereas the C50/C59 doesn't, and the groove where the snap ring holds the inner race on the shaft sits right in the middle of the rollers. I'm assuming that you weren't able to get the torque set properly with any of the shims, which prompted you to investigate?
Jason@SportsCarThread starterDebary, FL · Mar 26, 2012#985
The trans out of the 99 is in the shop for its new guts. With any luck I will have a close-ratio box by Friday.
Bluevitz-rsOshawa, Ontario, Canada · Mar 26, 2012#986
Do you know what the new ratios are?
CrankyOldManWest Michigan · Mar 27, 2012#987
Originally Posted by CrankyOldMan ↑
I don't want to spoil the surprise, but I think I've cracked the source and specs for these. Could you confirm if I have the specs right?

3rd - 28:19 (1.474:1)
4th - 29:24 (1.208:1)
5th - 25:26 (0.962:1)
Originally Posted by Bluevitz-rs ↑
Do you know what the new ratios are?
Jason said that he hadn't counted the teeth on them, but I'd be willing to bet that these are in fact the new ratios. 1st and 2nd are integrated into the input shaft, so he's stuck with 3.545:1 and 1.904:1 respectively.
Jason@SportsCarThread starterDebary, FL · Mar 27, 2012#988
Originally Posted by CrankyOldMan ↑
Jason said that he hadn't counted the teeth on them, but I'd be willing to bet that these are in fact the new ratios. 1st and 2nd are integrated into the input shaft, so he's stuck with 3.545:1 and 1.904:1 respectively.
I did not count the teeth, but Jeff @ MI did, and they were not the same counts as what you have found on the OE parts you pulled from the other boxes.

Yes, 1st and 2nd stay the same, and I would not want them any shorter. With our final drive and tire size 1st is only useful for getting on the trailer. With 2nd good only to 62mph, it is only used on very tight turns, any shorter and we would have to use 3rd for the slow stuff.

The new ratios are:
3rd 1.474 Kaaz
4th 1.208 Kaaz
5th 0.961 Kaaz

With this setup on most tracks we will use four gears VS only two or three with the current setup, offering much better acceleration. We will see 120mph in 5th at our redline, perfect for Road America. 👍
thebarberGrand Rapids, MI · Mar 27, 2012#989
just got my new issue of car and driver today....they did a b-segment racer comparo....kia, honda, mazda, mini....where was your toyota?
ROCKLAND TOYOTAROCKLAND COUNTY NY · Mar 27, 2012#990
Originally Posted by thebarber ↑
just got my new issue of car and driver today....they did a b-segment racer comparo....kia, honda, mazda, mini....where was your toyota?
late comer i quess.....
Jason@SportsCarThread starterDebary, FL · Mar 27, 2012#991
Originally Posted by thebarber ↑
just got my new issue of car and driver today....they did a b-segment racer comparo....kia, honda, mazda, mini....where was your toyota?
We were invited to the test, but they only wanted B-Spec cars. The 2012 was already in H Prod trim at that point - would have crushed the other cars, so its not a fair comparison - and Toyota did not want to take the old 98 B-Spec car so we politely declined.

Does it have lap times? Wondering if they beat what we did with the B-Spec car last year.
thebarberGrand Rapids, MI · Mar 27, 2012#992
Fit 1:53.1
Rio 1:52.0
2 1:53.2
Mini 1:53.0

Rio running wrong restrictor plate and too light
Jason@SportsCarThread starterDebary, FL · Mar 27, 2012#993
Originally Posted by thebarber ↑
Fit 1:53.1
Rio 1:52.0
2 1:53.2
Mini 1:53.0

Rio running wrong restrictor plate and too light
Not bad times. I did a 1:55 about 200lbs over weight, had a passenger. 😆 http://www.youtube.com/watch?v=5lBZlEM_85M
thebarberGrand Rapids, MI · Mar 27, 2012#994
if i read the article correctly, only the mazda 2 was actually perfectly following the scca rules...
Jason@SportsCarThread starterDebary, FL · Mar 27, 2012#995
Originally Posted by thebarber ↑
if i read the article correctly, only the mazda 2 was actually perfectly following the scca rules...
Which I believe as of the date that test was done may be incorrect... The Mazda guys were out watching at the Jan SCCA National we ran, but they did not bring their car. We asked them why, and they said because the car was not legal, the battery had been relocated and the parts were not available in the US at that time to fix it.

This is all part of the reason we pulled the plug on took the 2012 Yaris to H Production. So far only Honda and us (Toyota) have submitted the parts for our BS suspension kits to SCCA for testing, many manufacturers are still playing around. This is the second year the cars have been legal to run and people are still screwing around. 😠 And I would fully expect a manufacturer to send a hot car to a magazine test, you want your stuff to be on top. 😉
malibuguyWestminster, MD · Mar 27, 2012#996
i would love to build a b-spec or PT Yaris...if i win the mega millions...
Jason@SportsCarThread starterDebary, FL · Mar 27, 2012#997
Originally Posted by malibuguy ↑
i would love to build a b-spec or PT Yaris...if i win the mega millions...
Win the mega and my Yaris days are over, GT3 Cup Porsche thank you. ;)
ilikericesavannah, ga · Mar 28, 2012#998
LOL.. I think we all here are hoping you dont win the mega now..
Jason@SportsCarThread starterDebary, FL · Mar 28, 2012#999
Originally Posted by ilikerice ↑
LOL.. I think we all here are hoping you dont win the mega now..
So far I got nothing. 😆 Back to working on the Yaris.
Jason@SportsCarThread starterDebary, FL · Mar 30, 2012#1000
One C50 Yaris trans with new ratios.

Picture not included in this copy