Yarisworld Archive

Stay tuned

1,311 posts · 595,379 views · page 17 of 27

Replies continued

thebarberGrand Rapids, MI · May 31, 2011#801
are they going to be making the mounts for public sale?
Jason@SportsCarThread starterDebary, FL · May 31, 2011#802
Originally Posted by thebarber ↑
are they going to be making the mounts for public sale?
I don't know.
cali yarisCanoga Park, CA · Jun 9, 2011#804
aww, you're immortal now
thebarberGrand Rapids, MI · Jun 9, 2011#805
since when did you have the rear lip on the yaris? or side mirrors? for SHAME forza!

lol

thats pretty wicked though
Jason@SportsCarThread starterDebary, FL · Jun 13, 2011#806
Made a trip up to AAA Speedway on Sunday to pick up some tires. And there it was in the paddock, the Honda Fit HP racer. They still have a lot of work to do, but it was great seeing the car out there for the SCCA Regional race.

Luckily for them I happened to have a couple of my 13" Jongbloed Racing wheels with me, and they were able to do a test fit. Turns out the wheels we spec'd for the Yaris are a perfect fit over the Honda's brakes.

Hopefully they get the car up to speed and bring it to the Runoffs at Road America.

Picture not included in this copy
Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Jun 13, 2011#807
Haha, man they have that thing slammed in normal Honda fashion.
Jason@SportsCarThread starterDebary, FL · Jun 27, 2011#808
Pulled the old front off this past weekend. The lower core support was bent up pretty good from the last race. Also the bumper was not salvageable, it was bent to the point of being cracked, and most of the mounts/supports were missing or damaged.

Turns out the #20 Yaris is not going to be used anymore, so we are going to pull all of the support structure and bodywork we need off of it before it goes to the crusher. Best part, since it has the same graphics its just plug and play.

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Jun 27, 2011#809
Wha happen?
Jason@SportsCarThread starterDebary, FL · Jun 28, 2011#810
Originally Posted by Bluevitz-rs ↑
Wha happen?
Nothing major, just wear and tear from racing. With the 13" wheels I only have about 3" of ground clearance, dipping a tire off the track means the front bumper/belly pan both hit the ground.

Between getting punted at Willow Springs, and jumping off the track at Buttonwillow, the front end was due to be replaced.
Jason@SportsCarThread starterDebary, FL · Jun 28, 2011#811
We got all of the useful bits off of the 20 car, and it will soon meet the crusher. We swapped the damaged bumper from the 99 on to it.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
cali yarisCanoga Park, CA · Jun 28, 2011#812
is the cage going to be crushed? 🙁
Jason@SportsCarThread starterDebary, FL · Jun 28, 2011#813
Originally Posted by cali yaris ↑
is the cage going to be crushed? 🙁
Yeah, the whole thing. It's a weld in cage anyway, no way you could salvage and reuse it. The amount of hours that would take does not justify the few dollars saved versus getting a new one built.

The 98 car will stick around for a while, just in case they come up with a use for it - the 98 was supposed to go to the U.S. dealer meeting in Vegas this week, but they took something else.
ilikericesavannah, ga · Jun 28, 2011#814
can we have a moment of silence for when it goes to the crusher? 😢
Jason@SportsCarThread starterDebary, FL · Jul 11, 2011#815
Got the old stuff out this weekend, went much quicker than I thought it would. Unfortunately some parts are on back order so I could not start putting the new motor in yet, hopefully I can knock it out next weekend.

Picture not included in this copy
Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Jul 18, 2011#816
Shiny new motor in place - you could eat off this thing. 😁 Should have it back on the ground next weekend, then off to the dyno, and finally a test day at the track.

Picture not included in this copy
ilikericesavannah, ga · Jul 18, 2011#817
amazing.. looks so fresh
Jason@SportsCarThread starterDebary, FL · Jul 18, 2011#818
So I had some time to play with this some more while I had two engines sitting on the garage floor. 😆 I put both thermostats in a pan on the stove and heated them up to get open and closed lengths.

The Stant MR2 unit will fit. The only issue is the bypass will always be closed - with the stock thermostat the bypass is only closed when the thermostat is open.

So does anyone know what function the bypass has? 🤷

Originally Posted by Jason@SportsCar ↑
Another item to put on the to do list. Going to try the 170 degree thermostat from the MR-2 Spyder. Dimensionally is measures the same as the Yaris part - and the Yaris uses the same standard part as the Spyder - so hopefully it works.

$10 VS $75+ for the TRD Japan part. 👍

I probably wont install it until we put the new motor in.

Picture not included in this copy
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jul 18, 2011#819
Originally Posted by Jason@SportsCar ↑
So I had some time to play with this some more while I had two engines sitting on the garage floor. 😆 I put both thermostats in a pan on the stove and heated them up to get open and closed lengths.

The Stant MR2 unit will fit. The only issue is the bypass will always be closed - with the stock thermostat the bypass is only closed when the thermostat is open.

So does anyone know what function the bypass has? 🤷

"bypass valve regulates hot coolant into the heater core when you're using the heater or AC."-found USING GOOGLE....
Jason@SportsCarThread starterDebary, FL · Jul 18, 2011#820
Originally Posted by ROCKLANDTOYOTA ↑
"bypass valve regulates hot coolant into the heater core when you're using the heater or AC."-found USING GOOGLE....
Thanks. Since I don't have either of those it should not be a problem.
AstromanWenatchee, WA · Jul 18, 2011#821
Sad! Wish I could swap out the drivers side mirror with mine. Mine was broken at the swivel point and is gorilla glued, and when the glue did set it sagged a quarter inch. Toyota won't sell me the broken part, I need to buy the whole damn mirror.

Originally Posted by Jason@SportsCar ↑
Yeah, the whole thing. It's a weld in cage anyway, no way you could salvage and reuse it. The amount of hours that would take does not justify the few dollars saved versus getting a new one built.

The 98 car will stick around for a while, just in case they come up with a use for it - the 98 was supposed to go to the U.S. dealer meeting in Vegas this week, but they took something else.
Bluevitz-rsOshawa, Ontario, Canada · Jul 19, 2011#822
They bypass also help let through any trapped air bubbles.
Jason@SportsCarThread starterDebary, FL · Jul 26, 2011#823
New front end is in place. I decided to put the brake ducts behind the grill this time, looks better, hopefully they still get good airflow. I also moved the tow hook, one less thing sticking out of the bumper.

Picture not included in this copy
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jul 28, 2011#824
Originally Posted by Jason@SportsCar ↑
So I had some time to play with this some more while I had two engines sitting on the garage floor. 😆 I put both thermostats in a pan on the stove and heated them up to get open and closed lengths.

The Stant MR2 unit will fit. The only issue is the bypass will always be closed - with the stock thermostat the bypass is only closed when the thermostat is open.

So does anyone know what function the bypass has? 🤷
i just ordered a TRD thermostat through toyota that i thought was unavailable to me. should see it next week.....
Jason@SportsCarThread starterDebary, FL · Jul 28, 2011#825
Originally Posted by ROCKLANDTOYOTA ↑
i just ordered a TRD thermostat through toyota that i thought was unavailable to me. should see it next week.....
I figured it was not worth the risk of blocking the bypass with the cheap thermostat, so I ordered the cooler one from Mishimoto. Under $60 shipped on amazon. 👍
cali yarisCanoga Park, CA · Jul 28, 2011#826
MMTS-TC05 is listed for newer model Corolla and Celica; is that the one you got?

61C deg = 140F deg (Mishimoto rating)
82C deg = 180F deg (Toyota OEM according to Mishimoto)

I don't see a reference to Yaris specifically.
Jason@SportsCarThread starterDebary, FL · Jul 28, 2011#827
Originally Posted by cali yaris ↑
MMTS-TC05 is listed for newer model Corolla and Celica; is that the one you got?

61C deg = 140F deg (Mishimoto rating)
82C deg = 180F deg (Toyota OEM according to Mishimoto)

I don't see a reference to Yaris specifically.
No, MMTS-SUP-93T, its the Supra unit. I hope it is really not a 140, (perhaps a metric to English translation error on their part) that will be a little to cool. I will have to put it on the stove and test it. 😁
cali yarisCanoga Park, CA · Jul 28, 2011#828
^ hehe, that makes me chuckle, but it's a great way to see how it works.
Jason@SportsCarThread starterDebary, FL · Jul 28, 2011#829
Originally Posted by cali yaris ↑
^ hehe, that makes me chuckle, but it's a great way to see how it works.
Do it when the wife is not around... They never understand car parts in their cookware. 🤷

And now I am thinking it would not be bad if it was really cold... I might be able to tape up the top grill for better aero. 😉
ROCKLANDTOYOTAROCKLAND TOYOTA/SCION · Jul 28, 2011#830
conversion charts reads 140......
Jason@SportsCarThread starterDebary, FL · Aug 1, 2011#831
It's alive... Finally got around to starting it up with the new motor. Now we just need to get it back on the dyno, then out to the track.
thebarberGrand Rapids, MI · Aug 1, 2011#832
Originally Posted by Jason@SportsCar ↑
It's alive... Finally got around to starting it up with the new motor. Now we just need to get it back on the dyno, then out to the track.
are you allowed to post dyno sheets? if you are, could you?
Jason@SportsCarThread starterDebary, FL · Aug 2, 2011#833
What should I do with this? 🤷 Approx 2k miles on everything except the head and fuel injectors, which have about half that.

My plan is to keep the head, we have a lot of work in to it, and may want to revisit it later.

Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Aug 2, 2011#834
New parts are fun. Beatrush crank pulley. Hopefully a bit more durable than the last piece we had. Unfortunately, it's not an under drive unit, and it is a bit heavier than the last one, but if I don't have to pick up the pieces on the side of the track it will be worth it.

Stock 3lbs
Beatrush 1lb 4oz

Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Aug 8, 2011#835
Got a lot done this weekend... Corner weights set, alignment set, old engine torn down.

Little by little I have been working to pull more weight out of the car, purging the wiring harness, cutting more metal out of the doors. The payoff, 1814lbs with a 1/4 tank of fuel. There is not much left to drop, I have not installed the new crank pulley, and there is still some undercoating left, likely less than 5lbs total. I can't find the exact number, but I think the car has lost over 500lbs since we got it - and it didn't have interior to begin with. 😁

Picture not included in this copy


And there's your problem... All season long the car has been using a little bit of water. Never enough to show up in the oil pan, and no oil was making it's way into the radiator. Turns out the coating on both sides of the head gasket had failed. Every head bolt came out with milky oil on it. We can only speculate, but we think this happen at the Runoffs last Sept, when the crank pulley failed and I had to nurse the car around the track with none of the accessories running. The temp never spiked on the gauge, but nothing was circulating in the engine. This could have gotten the head hot enough to damage the gasket.

Picture not included in this copy

Now this is just wacky... The old water pump, only 2k miles on it, has a crack in the impeller. 😲 No idea what would have caused that, never gave any hint that it had a problem, still worked perfect last time we ran the car. 🤷

Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Aug 8, 2011#836
Originally Posted by ROCKLANDTOYOTA ↑
conversion charts reads 140......
And unfortunately as advertized it does open at 140. I had hoped that it might have been a math/conversion/marketing error, because who would need one that cold? 🤷 But that was not the case. Oh well.
markitectMichigan · Aug 10, 2011#837
Originally Posted by Jason@SportsCar ↑

Now this is just wacky... The old water pump, only 2k miles on it, has a crack in the impeller. 😲 No idea what would have caused that, never gave any hint that it had a problem, still worked perfect last time we ran the car. 🤷
I actually got my water pump replaced under warranty yesterday. I didn't get to take pictures but from what the technician said the crack was similar to yours, but when all the way up.

At this point the only symptom was that when you reduced the throttle there was a slight grinding noise. My guess is that it cracks in such a way that when your reducing the engine speed pressure builds up behind it causing the crack to expand, and the impeller to rub.

Mine has 32k miles on it, but I'm guessing the crack starts the same way, so suddenly lifting the pedal might be the cause, which I'm guessing you do a lot, and at high RPMs while racing.
Jason@SportsCarThread starterDebary, FL · Aug 10, 2011#838
Spent some time playing with the AEM over the last few days... The car has always been hard to start when cold, but with the new motor it would not start cold at all, I had to warm it up on the stock ecu and then swap to the AEM. 🙁 So I played with the initial crank fuel trim, and now it fires right up. 👍 Should have played with that settings a long time ago.

Hitting the dyno tomorrow, we will see how strong this engine is.

Signed up for the Xtremespeed event a Willow Springs on Saturday. Will have a chance to get some miles on the new engine, and test out the new Cusco centerlock upper mount paired with stiffer springs.
ilikericesavannah, ga · Aug 10, 2011#839
oh the envy
Jason@SportsCarThread starterDebary, FL · Aug 12, 2011#840
Due to a scheduling issue we ended up tuning the car early this AM. As expected we gave up some HP going to the stock engine... But OMG, the TQ more than makes up for it.

Peak HP is now 132@5500rpm (a full 1000rpm earlier than the old motor), and at 5000rpm I have 20lb-ft more TQ than the old setup.

While it sucks to give up the HP, nearly all of it was from 6500-7300rpm, so it wont be missed that much. The TQ increase will make a big difference on the start, corner exit, and every time I shift up a gear I will no longer be waiting for the engine to get back on the cam.

This should also make life easier on all the parts, as we no longer have any reason to spin past 7k.

Comparing this chart to the original (stock engine with the Camcon), shows how close the relatively inexpensive Camcon can get this car. The AEM got us about 2hp more, 8lb-ft more TQ, and another useable 500rpm. If we did not need every bit of power I would just use a Camcon. It gets you 95% of the way there, for about $1800 less. 😎
thebarberGrand Rapids, MI · Aug 13, 2011#841
nice!

have a dyno chart?
Jason@SportsCarThread starterDebary, FL · Sep 12, 2011#842
After waiting nearly a month for a TRD thermostat, that seems will never arrive, I found another option... Cosworth has a new line of low temp thermostats, and just happen to have a Supra fitment. 😎

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Sep 12, 2011#843
What's the temp?
Jason@SportsCarThread starterDebary, FL · Sep 12, 2011#844
Originally Posted by Bluevitz-rs ↑
What's the temp?
154f.
Bluevitz-rsOshawa, Ontario, Canada · Sep 12, 2011#845
What's the stock temp? 180
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 13, 2011#846
Originally Posted by Jason@SportsCar ↑
154f.
TRD is 160. will this be TOO LOW????
ilikericesavannah, ga · Sep 13, 2011#847
I think jason was hoping one was 140*F but wouldn't fit.. I think 160 isnt LOW ENOUGH 😁

I think I may go with the TRD though. Future upgrade eventually. need a water temp. gauge first
ROCKLAND TOYOTAROCKLAND COUNTY NY · Sep 13, 2011#848
Originally Posted by ilikerice ↑
I think jason was hoping one was 140*F but wouldn't fit.. I think 160 isnt LOW ENOUGH 😁

I think I may go with the TRD though. Future upgrade eventually. need a water temp. gauge first
TRD is UNOBTAINABLE through me....
Jason@SportsCarThread starterDebary, FL · Sep 13, 2011#849
Originally Posted by ROCKLAND TOYOTA ↑
TRD is 160. will this be TOO LOW????
I am not worried about six degrees, that is within the noise in which most of those things operate - they almost never start, and reach full opening right on target.
ilikericesavannah, ga · Sep 13, 2011#850
good point