Yarisworld Archive

GI: "YarGauge" replacement clock module (Digital Tach, etc.)

737 posts · 304,493 views · page 5 of 15

Replies continued

CTScottThread starterUSA, CT · Jan 20, 2010#201
Originally Posted by kustom play ↑
Scott,

On my dads car the other day he showed me a really cool feature. It tells him how many miles till empty.

Any way to add that in?
It is very possible! It would just require tapping one more wire on the cluster connector. I think I'll have to add it as another switchable option (so those who don't want to deal with tapping another wire don't have to).

This would give two more screen - Gallons or Liters left (rather than black bars) and estimated miles left at current burn rate.
yarstarGeorgia · Jan 20, 2010#202
This guy Scott is a genius! My money is READY! OMG this is gonna be so cool to have!
IsLNdbOiLas Vegas, NV · Jan 20, 2010#203
Awesome! So would we be able to configure it to show our current fuel economy / mpg AND miles left to empty?
CTScottThread starterUSA, CT · Jan 21, 2010#204
Originally Posted by IsLNdbOi ↑
Awesome! So would we be able to configure it to show our current fuel economy / mpg AND miles left to empty?
I only have 14 characters to work with, but something like this would fit:

MPG:9999 123Mi
IsLNdbOiLas Vegas, NV · Jan 21, 2010#205
That would be cool. Also, for the fuel economy you'd just need two characters, right?

Like this:

MPG:xx

If someone gets triple or quad digit fuel economy, please let us all know your secrets! 😛
Lucas13Fort Lauderdale · Jan 21, 2010#206
This is so awesome Scott you have covered everything needed and a lot more. You really went the extra mile by adding cruise control indicator, and all the other new things.

I like the new screen better. Can't wait!!! Can't wait!!!
ezhacker1San Francisco · Jan 21, 2010#207
is fuel system status like how many gallons left?
fmicleSan Jose, CA, USA · Jan 21, 2010#208
Originally Posted by IsLNdbOi ↑
If someone gets triple or quad digit fuel economy, please let us all know your secrets! 😛
I'm sure I can get 99 mpg going downhill 🙂 Technically, when the DFCO kicks in you get infinite mileage as long as the DFCO is on.
LewisNJ · Jan 21, 2010#209
A related issue to the Yargauge- In trying out the OZ cluster I ham fistedly broke the tabs on the front of the bezel trim and need a new one to make my dash look 100%. First off I want to warn Yargauge buyers to be VERY VERY careful removing the bezel as the front tabs are extremely fragile. If they break off on removal the dash loses the tight shuntline right in the front where it's most noticeable when you reinstall the bezel- so be careful guys. Secondly I wanted to ask if anyone knows if the bezel trim is the same on the sedan and hatch. There are always these parts available on eBay but most seem to be from sedans. Thanks for the help fellow Yargauge enthusiasts!
CTScottThread starterUSA, CT · Jan 21, 2010#210
Originally Posted by IsLNdbOi ↑
That would be cool. Also, for the fuel economy you'd just need two characters, right?

Like this:

MPG:xx

If someone gets triple or quad digit fuel economy, please let us all know your secrets! 😛
It's actually fairly easy to hit 3 digits (even without DFCO kicking in). The scangaugeII displays 9999 when in DFCO mode. The YarGauge will display DFCO, rather than 9999.
CTScottThread starterUSA, CT · Jan 21, 2010#211
Originally Posted by Lewis ↑
A related issue to the Yargauge- In trying out the OZ cluster I ham fistedly broke the tabs on the front of the bezel trim and need a new one to make my dash look 100%. First off I want to warn Yargauge buyers to be VERY VERY careful removing the bezel as the front tabs are extremely fragile. If they break off on removal the dash loses the tight shuntline right in the front where it's most noticeable when you reinstall the bezel- so be careful guys. Secondly I wanted to ask if anyone knows if the bezel trim is the same on the sedan and hatch. There are always these parts available on eBay but most seem to be from sedans. Thanks for the help fellow Yargauge enthusiasts!


The sedan and LB ones are different.

When removing the cluster trim, the key to not breaking the tabs is to pull the cluster trim with the radio surround. They separate much easier when off then when on the car, because of the angle required to gently pull the cluster's tabs out of the top of the radio trim. (I didn't figure that out until about to 10th time I had my dash apart).
IsLNdbOiLas Vegas, NV · Jan 21, 2010#212
Originally Posted by CTScott ↑
It's actually fairly easy to hit 3 digits (even without DFCO kicking in). The scangaugeII displays 9999 when in DFCO mode. The YarGauge will display DFCO, rather than 9999.
Ah I see. I'll have to read that DFCO thread. I saw it on one of the forums before and it was always being bumped, but I never did go into it.

Anyway, I'll take whatever you can do with the MPG / mile-to-empty simultaneous display. 😉

I was always jealous that my Dad's Hynundai had this feature, but my Yaris didn't.
LewisNJ · Jan 21, 2010#213
Thanks Scott- I envisioned a run on bezels when the YarGauge hit the streets.

:-)
andru47Orlando, FL · Jan 21, 2010#214
Around when can we expect this to be done?
CTScottThread starterUSA, CT · Jan 21, 2010#215
Originally Posted by andru47 ↑
Around when can we expect this to be done?
Very soon. I expect to be taking orders and shipping by the second week of February at the latest.
RedRideMiddletown, NY · Jan 21, 2010#216
Excellent ! 👍 🙂
joshpjostAmherst, MA · Jan 21, 2010#217
Any ideas for applying the Yargauge to the sedan versions? I'm still trying to think of an external location that would be effective.
CTScottThread starterUSA, CT · Jan 21, 2010#218
Originally Posted by joshpjost ↑
Any ideas for applying the Yargauge to the sedan versions? I'm still trying to think of an external location that would be effective.
Based on feedback from others, I am thinking that I will offer two packaging options for Sedan / tach-equipped Liftbacks.

The two will be:

1. A panel which replaces the left center vent grill.
2. A single DIN plate (for those who have replaced their OEM radio with a single DIN radio).
goku87AK · Jan 21, 2010#219
Originally Posted by CTScott ↑
1. A panel which replaces the left center vent grill.
2. A single DIN plate (for those who have replaced their OEM radio with a single DIN radio).
Alrighty! 👍
devinlamotheSudbury, Canada · Jan 22, 2010#220
My money is ready to leave my pockets.
dean_parkWentzville, MO · Jan 22, 2010#221
Hi Scott,
For the mi/km to empty feature, I think the cars that have this built in average this. Most times when the mpg feature is installed in the car, it has two screens instantaneous and average. I think the mi/empty is based on the rolling average so the value doesn't increase based on acceleration/cruise/coast/idle, etc. I'm not sure if it's possible in the controller you are using, but if so, can it be based on an average?

Doesn't matter... I'm still gunna buy it and I can ignore the value while accelerating.
CTScottThread starterUSA, CT · Jan 22, 2010#222
Originally Posted by dean_park ↑
Hi Scott,
For the mi/km to empty feature, I think the cars that have this built in average this. Most times when the mpg feature is installed in the car, it has two screens instantaneous and average. I think the mi/empty is based on the rolling average so the value doesn't increase based on acceleration/cruise/coast/idle, etc. I'm not sure if it's possible in the controller you are using, but if so, can it be based on an average?

Doesn't matter... I'm still gunna buy it and I can ignore the value while accelerating.

I was working on the interface to the fuel level wire last night. and was thinking about that. I agree that the data needs to be averaged, otherwise the miles until empty would bounce all over (from 80 miles with a full tank while goosing it, to infinity when in DFCO).
goku87AK · Feb 1, 2010#224
Just lookin for an update.
CTScottThread starterUSA, CT · Feb 1, 2010#225
Originally Posted by goku87 ↑
Just lookin for an update.
Just waiting for the final revision of the circuit boards to come in. The latest rev adds the fuel level in gallons/liters and range until empty.
POORSHANE CT · Feb 1, 2010#226
with all the revisions will this unit be able to do my daughters math homework ?
CTScottThread starterUSA, CT · Feb 1, 2010#227
Originally Posted by POORSHA ↑
with all the revisions will this unit be able to do my daughters math homework ?
I think so. Accuratizing of the fuel gauge data has even required the use of some calculus.
fmicleSan Jose, CA, USA · Feb 1, 2010#228
Sorry if this is either too late or stupid, but is it possible to get the air-to-fuel ration and the ignition timing?

And what's the refresh rate or response time for this thing?
cowboynorth etobicoke ontario canada · Feb 1, 2010#229
👍👍🆘🆘hi CTScott

can the YarGauge be converted to Metric Canadian units like km's & such ....if so i really like to buy one ...thanks

looking also to adapt my laptop & tower PC to become a temp. OBD11 scanner , what can u do here CTScott
CTScottThread starterUSA, CT · Feb 1, 2010#230
Originally Posted by cowboy ↑
👍👍🆘🆘hi CTScott

can the YarGauge be converted to Metric Canadian units like km's & such ....if so i really like to buy one ...thanks

looking also to adapt my laptop & tower PC to become a temp. OBD11 scanner , what can u do here CTScott
Yes, it will be configurable for US/Metric units.

A USB laptop interface will also be an option for the YarGauge. The laptop interface will provide data logging capability of all of the parameters that the YarGauge displays, plus as I figure out more Toyota specific things (like perhaps being able to enable or disable the seatbelt chime), those features will be added to the software for the laptop interface.
CTScottThread starterUSA, CT · Feb 1, 2010#231
Originally Posted by fmicle ↑
Sorry if this is either too late or stupid, but is it possible to get the air-to-fuel ration and the ignition timing?

And what's the refresh rate or response time for this thing?
Any software only additions are still possible at this point. The hardware is frozen, but the SW is not.

Air to fuel ratio is not a standard PID for OBD, but the ECM does monitor it. If I can figure out how to make the ECM tell it to me, then I can add it.

Ignition timing advance is a standard PID, so that one is an easy add.

Right now I am running with the refresh rate at 4x per second (2x that of the scangauge). I can go wayyyy faster, but then the values become a blur.
fmicleSan Jose, CA, USA · Feb 1, 2010#232
Originally Posted by CTScott ↑
Any software only additions are still possible at this point. The hardware is frozen, but the SW is not.

Air to fuel ratio is not a standard PID for OBD, but the ECM does monitor it. If I can figure out how to make the ECM tell it to me, then I can add it.

Ignition timing advance is a standard PID, so that one is an easy add.

Right now I am running with the refresh rate at 4x per second (2x that of the scangauge). I can go wayyyy faster, but then the values become a blur.
Oh man, if I were living close by, I'd be begging you to let me assist you... even if that meant only bringing you coffee and donuts 😉
MateoNear St.Louis · Feb 1, 2010#233
This has became one of my favorite threads to check. One question I did have, is this going to be a one time production run or will they be available past the fist run?
KCALB SIRAYVirginia · Feb 1, 2010#234
wow, 14 pages to read oh brother lol. Wanna make it easy for me Scott? Any chance of one with A/F and Boost in the mix of ideas for this in the future. Or have I stepped in a pile of words already spoken? Thanks.
CTScottThread starterUSA, CT · Feb 1, 2010#235
Originally Posted by Mateo ↑
This has became one of my favorite threads to check. One question I did have, is this going to be a one time production run or will they be available past the fist run?
It will continue to be available after the first run.
CTScottThread starterUSA, CT · Feb 1, 2010#236
Originally Posted by KCALB SIRAY ↑
wow, 14 pages to read oh brother lol. Wanna make it easy for me Scott? Any chance of one with A/F and Boost in the mix of ideas for this in the future. Or have I stepped in a pile of words already spoken? Thanks.
A/F was just asked a couple of posts above. It is a maybe depending on if I can figure out the CAN command to get the ECM to give it to me (as it isn't a standard OBD PID). Boost would be a no, as it requires adding a pressure sensor.
LewisNJ · Feb 1, 2010#237
image this all started with needing a tachometer!

from tiny acorns grow mighty oaktrees.
tk-421Dagobah · Feb 1, 2010#238
@CTScott: You are the MAN! Please let me know when I can snatch one of those OBD modules of yours, since my carpc needs a fast one (the ELM unit I bought does not refresh quickly enough for me).
JumpmanYarisSO. INDIANA · Feb 1, 2010#239
Originally Posted by fmicle ↑
Oh man, if I were living close by, I'd be begging you to let me assist you... even if that meant only bringing you coffee and donuts 😉
I want a some!

Scott when do you think this project of urs will start
CTScottThread starterUSA, CT · Feb 1, 2010#240
My "real" work keeps getting in the way, but I definitely plan to be shipping in February.
goku87AK · Feb 1, 2010#241
Originally Posted by CTScott;
I definitely plan to be shipping in ________.
Where have I heard that before? 👍
CTScottThread starterUSA, CT · Feb 1, 2010#242
Originally Posted by goku87 ↑
Where have I heard that before? 👍
Hey! No soup for you!!!
127.0.0.1NE · Feb 1, 2010#243
will the YarGauge be stamped
made by Vandelay Industries ?


also, you totally have to have the PCB etched with a miniature Crashy logo
CTScottThread starterUSA, CT · Feb 1, 2010#244
Originally Posted by 127.0.0.1 ↑
will the YarGauge be stamped
made by Vandelay Industries ?


also, you totally have to have the PCB etched with a miniature Crashy logo
Oh yeah. I had been trying to figure out a good trademark for the PCB. A little icon of Crashy it is...
mick.wheelzBrisbane, Australia · Feb 2, 2010#245
$75 and I would definitely be keen... that is a bargain!

edit: after reading the thread it seems its not 100% compatable with AUS clusters...

Would it be possible to fit it in the OEM position if one de-soldered the VFD for the clock?
CTScottThread starterUSA, CT · Feb 2, 2010#246
Originally Posted by mick.wheelz ↑
$75 and I would definitely be keen... that is a bargain!

edit: after reading the thread it seems its not 100% compatable with AUS clusters...

Would it be possible to fit it in the OEM position if one de-soldered the VFD for the clock?
There's not enough room behind the clock VFD on your cluster, but for US and Canadian clusters with tachs and digital clusters like yours, I am going to offer alterternative mounts as a single DIN plate (for those using a single DIN aftermarket radio) and a mount that replaces the left center A/C vent.
devinlamotheSudbury, Canada · Feb 2, 2010#247
This cannot be released soon enough. :D

Do you have any pictures of the vent mount yet?
CTScottThread starterUSA, CT · Feb 2, 2010#248
Originally Posted by devinlamothe ↑
This cannot be released soon enough. :D

Do you have any pictures of the vent mount yet?
I test mounted it to a vent with some sheet ABS that I had on hand. The push button will be to the left of the display, like the clock replacement one.


Picture not included in this copy

1 attachment not included in this copy

joshpjostAmherst, MA · Feb 2, 2010#249
That looks amazing!

I can't wait to get one.
hatchbackkid82. · Feb 2, 2010#250
come on scott when are you releasing it?