Yarisworld Archive

GI: "YarGauge" replacement clock module (Digital Tach, etc.)

737 posts · 304,493 views · page 2 of 15

Replies continued

RevssonSoutheast Wisconsin · Sep 5, 2009#51
I like the idea of a temperature readout and a clock, and the other features.
Being that my car is still brand spanking new to me (10 months),🙂 I still haven't taken
anything apart on it. However, I might be forced to try a mod. 😁
enviriCT · Sep 5, 2009#52
oh, oh, how about intergrating a scangauge in the cluster? im sure the LCD is detachable from the rest of the circuit board! get anotehr lcd size and stick that sucker somewhere :P
yarstarGeorgia · Sep 5, 2009#53
Originally Posted by CTScott ↑
I built a CAN bus interface this week and can read the PIDs (all of the standard OBD data), can read and reset stored DTCs, and can sniff the communication on the CAN bus between the ECM and the body ECUs.
I don't even know what any of that means, but you sure sound like you do! I am so excited about having a digital tach in my OEM cluster! Keep up the good work!
🤘
*MAD DOG*Victoria, Australia · Sep 5, 2009#54
Would be great to see a picture of a working prototype.
AltitudeColorado · Sep 5, 2009#55
I was looking at the clock today and I think it'd be better to just leave it as a single line instead of a double line. I think the characters would just be too small. Have you committed to a double line display?
CTScottThread starterUSA, CT · Sep 5, 2009#56
Originally Posted by Altitude ↑
I was looking at the clock today and I think it'd be better to just leave it as a single line instead of a double line. I think the characters would just be too small. Have you committed to a double line display?
I have a few different one line and two line LCDs on order to experiment with. The clock digits actually only fill about half of the height of the opening, so it may be possible to use a 2 line display with characters nearly the same size as the clock's.
yappariCA · Sep 6, 2009#57
Originally Posted by CTScott ↑
For the right hand clock clusters, there's no place within the cluster to mount it (without cutting plastic). My original thought with this whole thing is that it would really be for the tachless people. It started off as simply a tach in place of the clock and then the more I thought about it the more features that kept popping to mind.

Correct on the sensor probe for outside temp (although if I can figure out the CAN messaging for the A/C ECU, I can use it's outside temp probe and save people having to run a probe wire through the firewall).

I am making great progress on this. I built a CAN bus interface this week and can read the PIDs (all of the standard OBD data), can read and reset stored DTCs, and can sniff the communication on the CAN bus between the ECM and the body ECUs.
Are you by any chance using an Arduino for the microcontroller for all of this or are you programming your own PIC? I've recently started ordering some electronics to do something similar but probably not as sophisticated as what you're planning. I've read that an ELM preprogrammed pic is great for interfacing with the CAN bus, but it seemed a little costly and difficult to use. I asked an electric engineer where I worked (I used to work as a plastic engineer at the Corolla plant) and he said that I shouldn't have a problem interfacing with the ISO bus for Toyota cars if it's a cheaper/easier solution. I've got all the parts but the programming is still killing me even in this with the easy platform of the Arduino though, I'd like to keep hear about your progress though. Please keep us updated
CTScottThread starterUSA, CT · Sep 6, 2009#58
Originally Posted by yappari ↑
Are you by any chance using an Arduino for the microcontroller for all of this or are you programming your own PIC? I've recently started ordering some electronics to do something similar but probably not as sophisticated as what you're planning. I've read that an ELM preprogrammed pic is great for interfacing with the CAN bus, but it seemed a little costly and difficult to use. I asked an electric engineer where I worked (I used to work as a plastic engineer at the Corolla plant) and he said that I shouldn't have a problem interfacing with the ISO bus for Toyota cars if it's a cheaper/easier solution. I've got all the parts but the programming is still killing me even in this with the easy platform of the Arduino though, I'd like to keep hear about your progress though. Please keep us updated

I'm using two PICs within the design. One dedicated to the CAN Bus communication and the other for the user interface, direct RPM sampling and temp input.

The ELM PIC is way too expensive at $23 each. I built a code reader for ISO-9141 (K and L line comm) about ten years ago. The messaging for the CAN bus is very similar to OBDII, so most of my work thus far was redoing my hardware interface for CAN.
yappariCA · Sep 6, 2009#59
Originally Posted by CTScott ↑
I'm using two PICs within the design. One dedicated to the CAN Bus communication and the other for the user interface, direct RPM sampling and temp input.

The ELM PIC is way too expensive at $23 each. I built a code reader for ISO-9141 (K and L line comm) about ten years ago. The messaging for the CAN bus is very similar to OBDII, so most of my work thus far was redoing my hardware interface for CAN.
WOW! you're programming your own CAN pic?? ok that's way beyond me. I took a look at doing that and it was too complicating; NRZ coding, bus arbitration, bit timing, etc, it's just too much, lol.
well it's expected, it's really more of a hobby thing and i'm no CS major. But i have one way I can help out.. I've got a few ideas for making a attachable design; hopefully a design that would cost >5bucks worth of laser cut parts and possibly less in bulk. If you want to go with larger 2x24 or 2x16 LCDs instead i think it would be easy to make a housing and attachment clips for it. it may be a little more costly through this route but i think it would make a world of difference
advocatelocation · Sep 7, 2009#60
A design that I just thought of at the moment would be to have a progressive RPM bar that starts on one side of the display and move its way over. So instead of a digital numerical readout it would be a digital bar that would "fill" as the rpms went up.

If you could do that, and integrate the clock into the same display, I think you would deserve a medal haha. I had an idea that the clock would sit on the edge of one side, and the tach on the other. The tach would fill across the display and would overlap ontop of the clock if the RPMs got really really high. (If you're redlining, you're not worried about what time it is)

I MS painted this picture in about 2 minutes flat but I think it gets my idea across. Don't laugh too hard at my terrible drawing skills 🤣

I blame my laptops touchpad 👎
devinlamotheSudbury, Canada · Sep 11, 2009#61
After thinking about it, I would probably still buy this and find a way to rig it into my cluster. If I had to disable the clock on the right side I would do it.

It's too awesome to pass up. :P
CTScottThread starterUSA, CT · Sep 11, 2009#62
Originally Posted by devinlamothe ↑
After thinking about it, I would probably still buy this and find a way to rig it into my cluster. If I had to disable the clock on the right side I would do it.

It's too awesome to pass up. :P
At some point when you have nothing better to do, pop your cluster out, take the covers off and take a bunch of pictures. Maybe we can figure out a good place to integrate it where there's dead space and no circuit board.
GideonSunnyvale, CA · Sep 11, 2009#63
I think the left side in between the odo trip reset button and the tach would be a good option, but you'd have to cut a hole for the display in the plastic obviously.

I have to take mine out next week when I take my car in for warranty service so I'll take pictures if I have time.
devinlamotheSudbury, Canada · Sep 11, 2009#64
Originally Posted by CTScott ↑
At some point when you have nothing better to do, pop your cluster out, take the covers off and take a bunch of pictures. Maybe we can figure out a good place to integrate it where there's dead space and no circuit board.
I can do that most likely next week, since whenever I clean my car I take my dash apart to make sure I get all the dust/dirt away. Plus I just like taking things apart! 😉

But yes, it will most likely involve me dremelling a hole or something out of the plastic shroud in the cluster.
CTScottThread starterUSA, CT · Sep 12, 2009#65
So, I had Crashy's ECM fired up on my bench today as I was getting tired of having to go from my office to the garage to do some testing. I built a couple of circuits to make sensor data inputs to the ECM change, so I could vary the data (Speed, RPM, and Coolant Temp).

After successfully fooling the ECM with the 3 circuits, I realized that the speed one could be a fairly simple way of bypassing the speed limiter. Does anyone who races (legally) have an interest in testing that functionality?
AltitudeColorado · Sep 13, 2009#66
Originally Posted by CTScott ↑
So, I had Crashy's ECM fired up on my bench today as I was getting tired of having to go from my office to the garage to do some testing. I built a couple of circuits to make sensor data inputs to the ECM change, so I could vary the data (Speed, RPM, and Coolant Temp).

After successfully fooling the ECM with the 3 circuits, I realized that the speed one could be a fairly simple way of bypassing the speed limiter. Does anyone who races (legally) have an interest in testing that functionality?
It's a good thing you're not a evil genius... or are you?

👏 😁
CTScottThread starterUSA, CT · Sep 13, 2009#67
Originally Posted by Altitude ↑
It's a good thing you're not a evil genius... or are you?

👏 😁
Evil - Definitely evil.
AlexNet0Rockland, ME · Sep 13, 2009#68
no, but Ill test it anyway, lol
CTScottThread starterUSA, CT · Sep 13, 2009#69
Originally Posted by AlexNet0 ↑
no, but Ill test it anyway, lol
Dang! With your NOS kit and the speed limiter bypassed there wouldn't be a safe moose anywhere in Maine.
advocatelocation · Sep 13, 2009#70
Bypassing the speed limiter seems like an amazing idea to me... would certainly increase the value of the module as well...

You might have to just call the whole thing the "one mod wonder fix" for all Yarii without tachs 😆
custom LftbackHouston, TX · Sep 13, 2009#71
I'm definitely 100% for this idea and will buy one in a heartbeat! Keep up the great work CTScott!!
CTScottThread starterUSA, CT · Sep 13, 2009#72
Originally Posted by advocate ↑
Bypassing the speed limiter seems like an amazing idea to me... would certainly increase the value of the module as well...

You might have to just call the whole thing the "one mod wonder fix" for all Yarii without tachs 😆
I wouldn't build the speed limiter bypass into this module. It would be a separate stand alone module. The technology for it just happened to be an accidental benefit of me working on the YarGauge development.
CTScottThread starterUSA, CT · Sep 24, 2009#73
Update: I haven't had much free time to work on this in the past week or so, but I have been making good progress in the time that I find. I have the CAN Bus interface fully working (thanks to Garm for loaning me his ECM). It is very handy to have a fully functional ECM sitting on you desk, rather than having to run out to the garage to test code.

For the display piece, I am having a tough time locating appropriately sized LCDs with backlight colors that will match our cluster lighting colors. I am now seriously considering using a full color 1.2" graphics lcd instead of a simple 2 line character LCD. This will give me complete control over color and text size. It will also allow me to experiment with doing cool stuff like having an analog tach display.

This is the LCD I have ordered to experiment with. I will only be able to use half of the display height in the clock window area.

Picture not included in this copy

Picture not included in this copy

3 attachments not included in this copy

IsLNdbOiLas Vegas, NV · Sep 24, 2009#74
Very cool. Is it possible to cut the clock window opening so that the whole thing would be visible?

My brother just got a 2010 Mazda3 sedan and it has a small LCD (I think 3" diagonal) on the dash. It displays info. like average MPG, average speed, etc..
cali yarisCanoga Park, CA · Sep 24, 2009#75
I don't think people are going to want to chop up their cluster, but maybe I'm wrong. "plug 'n play" is the desire in general.
CTScottThread starterUSA, CT · Sep 24, 2009#76
Originally Posted by cali yaris ↑
I don't think people are going to want to chop up their cluster, but maybe I'm wrong. "plug 'n play" is the desire in general.
Agreed. With the way that the cluster is constructed, it would be difficult to open that area cleanly.
advocatelocation · Sep 24, 2009#77
I think an OEM replacement is a great idea but the problem is that the clock is really damn small which is a limitation. I think an OEM integration would be cool but wouldn't want the features of your unit to be hampered because of a small screen CTScott. Just my opinion though.

Keep up the great work whatever you decide. This is a thread I love to follow.
TinyGiantRochester, NH · Sep 24, 2009#78
something small and easy to find a place for in the car wouldnt be bad..would be like our own scan gauge .. clock space integration would be sweet though :)
LewisNJ · Sep 24, 2009#79
I just bought a cluster from Australia for 250 dollars (I know I'm nuts!) on eBay with all LCD data display so I may or may not be an eventual customer for this CT depending on how the unit from OZ works out for me.

But I would like to add my 2 cents-

1. simplicity is a high priority- just give me tach- I wear a watch for time telling.
2. plugging it into the current clock slot is a must- OEM look is priority #1.
3. the bigger the LCDs - the better- much more important than any other feature- please no 2 line extra data- just the BIGGEST tach LCDs possible please.
4. must be part of OEM cluster- if I wanted to go with an external device I'd have a tach on my drivers side glove compartment door right now.

I might be in the minority on this but simplicity and tach functionality is what it's all about for me. We all owe you a big thanks CT!

The beauty of this technique is no problem with the odometer which needs to be reset by your dealer if you want to keep it correct when you switch clusters for one with a tach- assuming you can ever find one used- a new one was $520 from my friendly local Toyota dealer.
1NZYaris1New Zealand · Sep 24, 2009#80
^ might want to send it to Scott if you have problems as it has all of the
display for mpg and such already there , just not wired .👍
LewisNJ · Sep 24, 2009#81
😉And I'm sure CTScott would LOVE to work on an Aussie cluster in his spare time!

If I had seen this thread earlier I'd have waited for CT to do his thing- now even if my aussie cluster works- I'll still be begging my Toyota service depatment to reflash my cluster. They did it with my seat belt warning chime for free but it would have been SO much easier to just go with this approach.

We all owe a great big thanks for this deal- YarisWorld rules.
CTScottThread starterUSA, CT · Sep 24, 2009#82
Originally Posted by Lewis ↑
I just bought a cluster from Australia for 250 dollars (I know I'm nuts!) on eBay with all LCD data display so I may or may not be an eventual customer for this CT depending on how the unit from OZ works out for me.

But I would like to add my 2 cents-

1. simplicity is a high priority- just give me tach- I wear a watch for time telling.
2. plugging it into the current clock slot is a must- OEM look is priority #1.
3. the bigger the LCDs - the better- much more important than any other feature- please no 2 line extra data- just the BIGGEST tach LCDs possible please.
4. must be part of OEM cluster- if I wanted to go with an external device I'd have a tach on my drivers side glove compartment door right now.

I might be in the minority on this but simplicity and tach functionality is what it's all about for me. We all owe you a big thanks CT!

The beauty of this technique is no problem with the odometer which needs to be reset by your dealer if you want to keep it correct when you switch clusters for one with a tach- assuming you can ever find one used- a new one was $520 from my friendly local Toyota dealer.


I am really looking forward to seeing if the Aussie cluster works. My money is on that it will.

As for the Yargauge, this thread has been handy for doing market research. I like hearing peoples' opinions and ideas. I definitely intend on having user configurable options, like miles or km, one or two line display, etc.
*MAD DOG*Victoria, Australia · Sep 24, 2009#83
Originally Posted by Lewis ↑
😉And I'm sure CTScott would LOVE to work on an Aussie cluster in his spare time!

If I had seen this thread earlier I'd have waited for CT to do his thing- now even if my aussie cluster works- I'll still be begging my Toyota service depatment to reflash my cluster. They did it with my seat belt warning chime for free but it would have been SO much easier to just go with this approach.

We all owe a great big thanks for this deal- YarisWorld rules.
Lewis,

You should start an Aussie Cluster Thread. I'm sure if it works it will become a sticky. 🎉
1NZYaris1New Zealand · Sep 25, 2009#84
i hate to say this , and hopefully i am wrong , but the
Ausie / NZ cluster is angle at the US passengers side
it might not be vissable from the US drivers side ,
Best case is that the US mounting Brackets are differant .
Best of luck and keep us informed 👍
DevilGirlLehigh Valley, PA · Sep 25, 2009#85
My biggest gripe with the clock is that it doesn't display when you have the key turned to accessory only, you have to turn it to ON so you can get the readout. Pain in the arse when you're sitting there waiting for the train to arrive, listening to music, and you want to see what time it is, you have to turn the key on instead of just looking up... GRRR! Stinkin electronics!
LewisNJ · Sep 25, 2009#86
Originally Posted by 1NZYaris1 ↑
i hate to say this , and hopefully i am wrong , but the
Ausie / NZ cluster is angle at the US passengers side
it might not be vissable from the US drivers side ,
Best case is that the US mounting Brackets are differant .
Best of luck and keep us informed 👍
Now - yet another thing that could go wrong!

I agree that's a real possiblity with the RHD layout- and believe it or not I did think of it- but thought maybe even if it's wrong the mounting might be modify-able.



I think it's a 50-50 at the very best but what the heck- I thought it was worth a try both for the appearance of the face which I like very much, and the fact it would most certainly be unique if it did work out.

Lewis
AstromanWenatchee, WA · Sep 25, 2009#87
Hell, I'm interested in bypassing the speed limiter. I might be down for this too, even though I have a scangauge already.
LewisNJ · Sep 25, 2009#88
I fell guilty that I'm intruding on this thread- I'll start a new one on DIY maintenance- OZ CLUSTER
*MAD DOG*Victoria, Australia · Sep 25, 2009#89
Originally Posted by Lewis ↑
I fell guilty that I'm intruding on this thread- I'll start a new one on DIY maintenance- OZ CLUSTER
Originally Posted by a_wise_man_5_posts_ago_said
Lewis,

You should start an Aussie Cluster Thread. I'm sure if it works it will become a sticky. 🎉
I think you should read this guys posts. He knows what he's talking about. 😎
goku87AK · Sep 29, 2009#90
Originally Posted by CTScott ↑
OK. So far it looks like I'll keep the clock function. The other function that I am thinking of adding is inside and outside temperature.

I will also be experimenting with 1 line vs 2 line LCDs to see what will fit in the slot that the clock peeks through. the slot is actually about 1 5/8" x 5/8", so it may be possible to squeeze a 2 line by 8 character LCD in there, which would allow the clock or temp to be displayed simultaneously with one of the other items.

Also, the RPM measurement will be done directly (via the Tach input wire to the meter), rather than through the CAN comm with the ECM. This will make it more responsive than the devices that get it second hand from the ECM.
was looking at the hole and it doesn't seem super big for the two-line display to be able to have the same size digits as what's already in there. :(
justjesusOrange County · Oct 14, 2009#91
Originally Posted by CTScott ↑
After successfully fooling the ECM with the 3 circuits, I realized that the speed one could be a fairly simple way of bypassing the speed limiter. Does anyone who races (legally) have an interest in testing that functionality?
I wouldn't mind taking another trip to El Mirage for top speed runs (it's legal).
CTScottThread starterUSA, CT · Oct 14, 2009#92
Originally Posted by justjesus ↑
I wouldn't mind taking another trip to El Mirage for top speed runs (it's legal).
Cool! When I have a chance I'll build up a test unit. I realized recently that I can do a reverse test initially to make sure it works. By reverse test I mean fooling the ECM to think that the car is doing 130MPH when it is actually only doing 25.
Vitz RangaaaHFloowwda · Oct 14, 2009#93
Ooo can't wait, ill be setting money aside for this.
justjesusOrange County · Oct 15, 2009#94
Originally Posted by CTScott ↑
Cool! When I have a chance I'll build up a test unit. I realized recently that I can do a reverse test initially to make sure it works. By reverse test I mean fooling the ECM to think that the car is doing 130MPH when it is actually only doing 25.

LMAO - I was thinking you'd be driving in reverse!! Glad you cleared that up.
CTScottThread starterUSA, CT · Nov 4, 2009#95
Update: Getting close!

I am making good progress on the YarGauge development and am getting close to being ready to cut a production printed circuit board that will allow me to package it to fit where it is intended to go. Right now I have three separate prototype circuit boards, tied together, handling the various functions.

On of the last "data" related pieces I have been working on is the fuel economy (MPG) piece. Last night I did a test run to make sure that my code was functioning properly and captured the data to do some after the fact analysis on. Here's a plot of speed (MPH) vs. fuel economy (MPG) from a 4 mile test run last night. The graph really doesn't have much to do with the YarGauge, but I thought it was interesting enough to post.

I started capturing data about 1/4 mile from my house, going down a long steep hill, as I was specifically interested in catching a DFCO event.

Then I sit at a stop sign for a minute or so, waiting to make a left. Then, I drive about half a mile before making a left, a quick right, and a left (the three low bumps). Then I cruise up a long hill, which has a couple of level off points (seen by the DFCO events). I then make a rolling stop (low bump towards the end), a right turn, and then cruise down a gently sloping hill, before finally stopping.

Picture not included in this copy

1 attachment not included in this copy

TinyGiantRochester, NH · Nov 4, 2009#96
thats pretty sweet

will there be functionality to download this data from the unit you will be selling.. scratch that.. that i will be buying!?
CTScottThread starterUSA, CT · Nov 4, 2009#97
Originally Posted by TinyGiant ↑
thats pretty sweet

will there be functionality to download this data from the unit you will be selling.. scratch that.. that i will be buying!?
Hmmm. After playing with the data last night I was thinking that it would be cool to offer that feature. I'll have to see how that fits as I work on cutting the PCB and figuring out the packaging. The interface would be USB, so I could probably squeeze in a mini usb jack, and then you'd run a USB cable from the back of the cluster to someplace where you could plug it into your laptop.
TinyGiantRochester, NH · Nov 4, 2009#98
if that was a $10-15 increase in price option i'd still do it :)

that would be an awesome feature.
advocatelocation · Nov 4, 2009#99
That is pretty damn cool CTScott. Gotta start saving for this awesome gadget if it's getting close to being finished.
TinyGiantRochester, NH · Nov 4, 2009#100
is there stock i can buy now in CTscott Corp?

lol I want to get in cheap :)