Yarisworld Archive

GI: "YarGauge" replacement clock module (Digital Tach, etc.)

737 posts · 304,493 views · page 3 of 15

Replies continued

LewisNJ · Nov 4, 2009#101
This will be a great Christmas gift for members to get for themselves from CTScott!
KioshiFremont, CA · Nov 4, 2009#102
CTScott is the Santa Clause for Yaris World :)

I may end up keeping my stock cluster in case i want to swap back and forth between Scott's modded RS cluster and Scott's replacement clock module on stock cluster.
LewisNJ · Nov 4, 2009#103
Jingle Bells........Jingle Bells

..................oh what fun it will be to ride in a Yaris with a Yargauge!
PatrickJohnsonMurfreesboro, TN · Nov 6, 2009#104
i want it now.
anubisx99Natick, MA · Nov 7, 2009#105
Originally Posted by PatrickJohnson ↑
i want it now.
+1😆😁👍
MistryWhere Only Yaris' Can Go · Nov 8, 2009#106
Looks good and you are making real progress!

Have to say that there are some really gifted people on here.

Keep up the amazing work!!!
justjesusOrange County · Nov 10, 2009#107
Neat info on that graph!
Keep it going, CT.
CTScottThread starterUSA, CT · Nov 10, 2009#108
Originally Posted by justjesus ↑
Neat info on that graph!
Keep it going, CT.
I need to add a software interface for grabbing GPS data from my little USB GPS, then I could plot fuel economy vs location and change in altitude. That would let the hypermilers optimize their routes.
POORSHANE CT · Nov 10, 2009#109
This is coooool, How many atations will it get so I can cancel my cable?
enobmort42Denver, CO · Nov 10, 2009#110
this is pretty cool. following!
tk-421Dagobah · Nov 10, 2009#111
Originally Posted by CTScott ↑
I need to add a software interface for grabbing GPS data from my little USB GPS, then I could plot fuel economy vs location and change in altitude. That would let the hypermilers optimize their routes.
There's already an open-source approach to this that you may be interested in checking out:
http://icculus.org/obdgpslogger/
CTScottThread starterUSA, CT · Nov 10, 2009#112
Originally Posted by tk-421 ↑
There's already an open-source approach to this that you may be interested in checking out:
http://icculus.org/obdgpslogger/
That's awesome. I might have to use that.
StolnWinnipeg, Canada · Nov 15, 2009#114
What about getting the guts to make the canadian cars right side cluster work like it says it should, it has temp, avg miles per gallon, etc. They are hard to see but if you look at it in the right light you see they are there just not working. European modeles have atleast the temp. working, maybe a sacrifice for us Canadian HB owners. I would love a outside Temp. I have been trying to find a way to get the cluster to work like this for a while and have had no luck. Damb those European cars, get all the fun stuff and we have to duplicate it here......lol.
CTScottThread starterUSA, CT · Nov 15, 2009#115
Originally Posted by Stoln ↑
What about getting the guts to make the canadian cars right side cluster work like it says it should, it has temp, avg miles per gallon, etc. They are hard to see but if you look at it in the right light you see they are there just not working. European modeles have atleast the temp. working, maybe a sacrifice for us Canadian HB owners. I would love a outside Temp. I have been trying to find a way to get the cluster to work like this for a while and have had no luck. Damb those European cars, get all the fun stuff and we have to duplicate it here......lol.
Does the Canadian one have a separate display area for the clock, temp and MPG (like the European/Australian digital ones do), or is that part of the display with the gas gauge and odo?
metalsharkMesa, AZ · Dec 5, 2009#116
I'm developing a display kit for GadgetGangster.com. It will be a two board kit that sandwiches the Propeller micro-controller board. I only have one of the boards back from Expresspcb.com (see direct image link). I'm still designing the second board.http://i351.photobucket.com/albums/q.../PropDtach.jpg
Currently the analog display has 20 leds but for every four you take away you get one more digital readout. Give me a shout as to what functions you want on the second board and we will incorporate the correct chips. I'm still designing the custom display. Some of you saw my early BS2 prototype that was too expensive.
This version is based on the eight-core Parallax Propeller mP. I want to add an outside air temperature function to the second board. For those of you that require a centigrade readout that would be one more constant in software. The second board already has the digital speedometer driver on it. Correcting for different tire sizes would be a matter of adjusting a constant against your GPS unit. Again the difference between MPH an KPH is just a constant in software.
CTScottThread starterUSA, CT · Dec 15, 2009#117
Originally Posted by Ivory ↑
Are these still in the works?

Happy Holidays!
Yes. They won't be ready to go under your tree, but save your money for just after the new year. I am off for a couple of weeks starting next week, and that will give me the time I need to wrap it up. The complete proto will be going in my car next week, and the production proto will be going into Lewis' car, just after the holidays (he volunteered to be a beta tester).
AlexNet0Rockland, ME · Dec 15, 2009#118
^If you ever need another tester, let me know!
dean_parkWentzville, MO · Dec 16, 2009#119
Is there a pre-order list? I would like to get on it if there is one.
CTScottThread starterUSA, CT · Dec 16, 2009#120
Originally Posted by dean_park ↑
Is there a pre-order list? I would like to get on it if there is one.
I haven't built a list, but once I put them into production, I'll be able to build them up quickly to fill orders.
hatchbackkid82. · Dec 17, 2009#121
Sorry but i'm being a lazy ass right now, so this is a digital tachometer , does it do anything else?
hatchbackkid82. · Dec 17, 2009#122
Nevermind

Originally Posted by CTScott ↑
A while back there was a discussion about converting the clock on the cluster to a digital tach. I have been exploring this a bit more and am looking at creating a replacement module for the clock that would have an 8 character display and would allow you to switch between the following functions (using the same push button that is used currently to set the clock):

1. Tachometer (RPM 9999)

2. Diagnostic trouble code read/reset (DTC 9999) (If more than one code is present it would scroll between the stored codes). Holding the button for 5 seconds would clear the stored code(s).

3. Water Temp (WT 999F) or (WT 999C)

4. Battery Voltage (VOLT 99.9)


And, probably a few more. Maybe even MPG (instant and average), if I can figure out how to calculate those from the available data.

It would remember the last display choice and F or C for temp.

Installation would require popping the cluster out, removing the clock module (a separate chuck held to the back of the cluster with some tabs), disconnecting the clock connector, replacing the clock's circuit board with mine (pop a couple of tabs and remove two screws), reconnect the clock connector to my module, and tap four wires onto the other cables going to the cluster.

Target price would be $75. The question is at that price, would there be enough interest to make it worth my time?
CTScottThread starterUSA, CT · Dec 17, 2009#123
Right now I have the following programmed:

1. RPM (displayed as a number or a bar graph)
2. Clock
3. Fuel Economy (MPG)
4. Ambient Temp
5. Coolant Temp
6. Intake Air Temp
7. Display / Clear DTCs (check engine light)
8. Battery voltage.

If there are additional data pieces that people would like to see, let me know and I'll add them before I go to production.

One option that I will be building in is a USB interface for connecting a laptop for those that wish to do data logging. The PC software will be a reasonably priced option that will be offered within a couple of months after the release of the unit itself.
hatchbackkid82. · Dec 17, 2009#124
Oil temperature?
CTScottThread starterUSA, CT · Dec 17, 2009#125
Originally Posted by hatchbackkid82 ↑
Oil temperature?
Unfortunately, the Yaris doesn't have a sensor for oil temp.
KioshiFremont, CA · Dec 17, 2009#126
Just out of curiosity CTScott.....there wouldn't be any way to modify this onto my Vitz RS cluster, now would there? I'm really intrigued by the other functions you've accommodated for this module.

Or if you're module can function as a backup odometer if the original odometer can't be solved on the RS cluster.... 🤷
CTScottThread starterUSA, CT · Dec 17, 2009#127
Originally Posted by Kioshi ↑
Just out of curiosity CTScott.....there wouldn't be any way to modify this onto my Vitz RS cluster, now would there? I'm really intrigued by the other functions you've accommodated for this module.

Or if you're module can function as a backup odometer if the original odometer can't be solved on the RS cluster.... 🤷
I'm still trying to figure out a solution for it for people who have clusters with a tach. I'd like to find an alternate mounting place, which doesn't require modification of plastic.
cali yarisCanoga Park, CA · Dec 17, 2009#128
1. RPM (displayed as a number or a bar graph)
2. Clock
3. Fuel Economy (MPG)
4. Ambient Temp
5. Coolant Temp
6. Intake Air Temp
7. Display / Clear DTCs (check engine light)
8. Battery voltage.
That is more than enough. I would have paid for just a tach. 🙂
47_MasoN_47Northwest Alabama · Dec 25, 2009#129
I'd still be interested in one of these even if I couldn't get it to go into the existing cluster. I have a GPS hanging off my window already, so it wouldn't bother me to just scotch tape the thing to my GPS lol. Anything that gives me more information about what's going on in the car than just the MPH and RPMs will be an improvement.

Function over form all the way here.
YarisSedanCalifornia - Bay Area · Dec 25, 2009#130
is there going to be a version for the sedans =)
CTScottThread starterUSA, CT · Dec 25, 2009#131
Originally Posted by YarisSedan ↑
is there going to be a version for the sedans =)
We'll figure out some way to make it Sedan friendly. You sedan people miss out on too many toys.
aruntoIndy · Dec 25, 2009#132
what's ETA on production?
CTScottThread starterUSA, CT · Dec 25, 2009#133
Originally Posted by arunto ↑
what's ETA on production?
Mid January.
dean_parkWentzville, MO · Dec 25, 2009#134
Originally Posted by CTScott ↑
Mid January.
any chance some early production models will be complete this week? Prob not, but I'm in Rhodey and driving back to MO next week. Figured CT is close :)
CTScottThread starterUSA, CT · Dec 25, 2009#135
Originally Posted by dean_park ↑
any chance some early production models will be complete this week? Prob not, but I'm in Rhodey and driving back to MO next week. Figured CT is close :)
Most likely not. I am targeting getting the production prototype installed in my car this week for a final shake-down before going to full production.
dean_parkWentzville, MO · Dec 25, 2009#136
cool... just figured I'd ask since I'm in the neighborhood. I don't make it out this way too often anymore.
dean_parkWentzville, MO · Jan 6, 2010#137
Hi CTScott, How is prototype and beta build so far? Best of luck!
CTScottThread starterUSA, CT · Jan 6, 2010#138
Originally Posted by dean_park ↑
Hi CTScott, How is prototype and beta build so far? Best of luck!
It's getting there. With the wife and kids on vacation at the same time as me, I didn't get as much done as I wanted.

Here's a teaser of what it's looking like. This week the production proto will be in my car, so I will be able to grab some installed pics and video:

Picture not included in this copy

1 attachment not included in this copy

dean_parkWentzville, MO · Jan 6, 2010#139
that's so sexy I need to change my shorts... great work!!!
CTScottThread starterUSA, CT · Jan 6, 2010#140
Originally Posted by kustom play ↑
wow

that look great! I cant wait for the final version

how will this install as far as hooking up for the temps?
Installation will be fairly simple. Included with it will be the tap splices needed for the 7 connections. 5 Connections will occur at the cluster and two (for the outside temp sensor) will be made at the A/C Amplifier, which is under the dash, by the gas pedal.
IsLNdbOiLas Vegas, NV · Jan 6, 2010#141
So this is still supposed to replace the stock clock module in the instrument cluster? Looks good.
CTScottThread starterUSA, CT · Jan 6, 2010#142
Originally Posted by IsLNdbOi ↑
So this is still supposed to replace the stock clock module in the instrument cluster? Looks good.
Correct. Also, you will have the display color choice of orange (to match 09-10) or white (to match 06-08). Also, the clock and outside temp can be turned off (via a configuration switch bank on the back of the unit) for those who so desire.
jdmsIowa · Jan 8, 2010#143
any estimated time when these will be available?

sorry to keep beating a dead horse
devinlamotheSudbury, Canada · Jan 8, 2010#144
Looks great! I will definitely have to figure out a way to integrate this into my dash, as I do have the Canadian model with a tach, and the clock is part of the fuel display.

BUT, I will still be getting one of these.
CTScottThread starterUSA, CT · Jan 8, 2010#145
Originally Posted by jdms ↑
any estimated time when these will be available?

sorry to keep beating a dead horse
I expect to be shipping by the end of January. I have the production build parts on order.
POORSHANE CT · Jan 8, 2010#146
would you like to take payment so we can start lining up?
CTScottThread starterUSA, CT · Jan 8, 2010#147
Originally Posted by POORSHA ↑
would you like to take payment so we can start lining up?
Not yet. I don't like to take people's money until I am ready to ship.
goku87AK · Jan 8, 2010#148
I'm way excited for these even though my yaris has gone to yaris heaven lol.
CTScottThread starterUSA, CT · Jan 8, 2010#149
Originally Posted by kustom play ↑
yea im going to pick one of these up, you said it was going to be a code reader as well?
Correct (reader and resetter).

I am calibrating the temperature sensor input on my car (and on Crashy for comparison) right now.
mr9865Green Bay WI · Jan 9, 2010#150
so cool!