Yarisworld Archive

GI: "YarGauge" replacement clock module (Digital Tach, etc.)

737 posts · 304,493 views · page 11 of 15

Replies continued

henry33slovakia · Sep 13, 2010#501
that will be great :) what is the expected ending of this project ? do you have some idea how will the box (stand alone) look like ?
thanks
btw: what will be the price ?
CTScottThread starterUSA, CT · Sep 13, 2010#502
Originally Posted by henry33 ↑
that will be great :) what is the expected ending of this project ? do you have some idea how will the box (stand alone) look like ?
thanks
btw: what will be the price ?
I don't have a definite time period yet for when these will be shipping. I still have to figure out packaging for the standalone one, but it will probably be in a case about 10cm wide x 5cm high x 3cm thick. The stand alone one will be able to take advantage of the entire display where the integrated one is only able to use about 1/3 of the height of the display. With the cost of the OLED display, the cost will be in the $150 range.
henry33slovakia · Sep 13, 2010#503
do you have a photo or video how the entire display look like in action ?
CTScottThread starterUSA, CT · Sep 13, 2010#504
Originally Posted by henry33 ↑
do you have a photo or video how the entire display look like in action ?
Not yet, as I haven't started programming for that yet.
47_MasoN_47Northwest Alabama · Sep 13, 2010#505
I'm so excited about this project...this is the reason I've put off getting an Ecometer or Scangauge!
127.0.0.1NE · Sep 13, 2010#506
Originally Posted by fmicle ↑
^ There is only so much programming you can do with one single button...
actually, the options are infinite. with a single button
there are actually three things going on

[think morse code]

time
open circuit
close circuit


and with proper intuitive escape detection [esc] routine, it can be fast too.
henry33slovakia · Sep 13, 2010#507
looks really beautiful but I can wait to have (unfortunately it would be in months) :(
fmicleSan Jose, CA, USA · Sep 13, 2010#508
Originally Posted by 127.0.0.1 ↑
actually, the options are infinite. with a single button
there are actually three things going on

[think morse code]

time
open circuit
close circuit


and with proper intuitive escape detection [esc] routine, it can be fast too.
True, true, but it would be hard to use by the average consumer 😉 Which of course does not apply here, the brilliant Yaris owner community
127.0.0.1NE · Sep 13, 2010#509
Originally Posted by fmicle ↑
True, true, but it would be hard to use by the average consumer 😉 Which of course does not apply here, the brilliant Yaris owner community
no it won't be hard


you need proper documentation.

not one giant folded map-sized sheet from japan with 187 if/then statements
and pictograms.
47_MasoN_47Northwest Alabama · Sep 13, 2010#510
Originally Posted by 127.0.0.1 ↑
you need proper documentation.

not one giant folded map-sized sheet from japan with 187 if/then statements
and pictograms.
Aint that the truth...
CTScottThread starterUSA, CT · Sep 13, 2010#511
Originally Posted by 127.0.0.1 ↑
no it won't be hard


you need proper documentation.

not one giant folded map-sized sheet from japan with 187 if/then statements
and pictograms.
At the moment to keep the user interface simple, it is just short press and long press. A short press on any screen brings you to the next screen. A long press on any screen other than the DTC ones brings you into clock set mode. In the DTC screens a long press brings you to the dialog for clearing the DTCs.

For configuration of colors, displayed/hidden screen choices, etc., I plan on implementing them through the optional USB PC interface.
sleey0PA · Sep 13, 2010#512
Now all you need to do is make it work with a fuel management system and have it display read outs for it.

SWEET!!!

CT, good luck and I believe this is going to make you immortal around here, for sure:D
eTiMaGoBangkok, Thailand · Sep 13, 2010#513
he is already known as

Picture not included in this copy

;)
RevssonSoutheast Wisconsin · Sep 13, 2010#514
Originally Posted by 47_MasoN_47 ↑
I'm so excited about this project...this is the reason I've put off getting an Ecometer or Scangauge!
I just bought a Scangauge from Garm, since I couldn't wait.
Now, when this one comes out, I can always either sell the Scangauge or
keep it as a reference/useage for my friends.
tk-421Dagobah · Sep 13, 2010#515
Originally Posted by CTScott ↑
At the moment to keep the user interface simple, it is just short press and long press.
I was hoping long press wasn't already taken. 🙂

For configuration of colors, displayed/hidden screen choices, etc., I plan on implementing them through the optional USB PC interface.
I didn't know there would be a PC interface as well... Very interesting.

If you could add optional programmability on the PC interface so that the long press could be used for other stuff, then I think it would be kinda nice. Even an optional double-click function would be desirable I think.

Still, I know it's going to be an excellent product no matter which way you end up going. 👍
TinyGiantRochester, NH · Sep 14, 2010#516
Just watched the video. I really dig it. cant wait for it to be finished!
SirSchwankChicago, IL · Sep 14, 2010#517
That video is proof that this is worth the wait, imo.

I know I am most interested in using this as a tach and most of the other features are info-porn for me. So i would like to have the RPM bargraph always showing and have the other text displays rotate every couple of seconds.

Scott, would it be helpful to have a feature priority poll on here so you know where to spend your time?

Also, I wouldn't hesitate to drop anything less than $200 on this, so if the USB option doesn't delay release too much or increase the price above that, i'm all for it.
nightstalkeranaheim, ca · Sep 14, 2010#518
I would be most interested for 75 bucks
PhillyGgeorgia · Sep 14, 2010#519
Originally Posted by SirSchwank ↑
That video is proof that this is worth the wait, imo.

I know I am most interested in using this as a tach and most of the other features are info-porn for me. So i would like to have the RPM bargraph always showing and have the other text displays rotate every couple of seconds.
AGREED! 👍
CTScottThread starterUSA, CT · Sep 15, 2010#520
Originally Posted by PhillyG ↑
AGREED! 👍
I like that idea as well. Other than RPM and MPG, the bar graph really isn't that useful, so it makes sense to have the RPM bar graph be displayed on all screens except MPG.
RedRideMiddletown, NY · Sep 15, 2010#521
Personally, I will find WT, V, and MPG the most usefull as I suspect most who already have a tach will also. 🙂
sleey0PA · Sep 15, 2010#522
Damn.

This thing is going to let me skimp on some gauges once I get boosted!

So, in essence, you are saving me time and money if this thing really is less than $100!!!

w00t:D
MistryWhere Only Yaris' Can Go · Sep 15, 2010#523
I have a feeling that there are going to be quite a few Scangauges up for sale once this is released.
CTScottThread starterUSA, CT · Sep 15, 2010#524
Originally Posted by sleey0 ↑
Damn.

This thing is going to let me skimp on some gauges once I get boosted!

So, in essence, you are saving me time and money if this thing really is less than $100!!!

w00t:D
Just to clarify on the price piece, originally I was targeting under $100, but that was when I was looking to use a $6 LCD. With the OLED display being $79, we are more realistically looking at $150 - $200.
sleey0PA · Sep 15, 2010#525
Well I would have to think it over.

We are cutting in on a fic here.

Maybe later down the line after I have my car set the way I want first and get boosted.
RedRideMiddletown, NY · Sep 15, 2010#526
Originally Posted by CTScott ↑
Just to clarify on the price piece, originally I was targeting under $100, but that was when I was looking to use a $6 LCD. With the OLED display being $79, we are more realistically looking at $150 - $200.
OK... it's good you clarified the price.
Personally I did not know that.

However, it's stiil a good price considering what it does and the new display is much better. 🙂
127.0.0.1NE · Sep 16, 2010#527
price won't matter for a device this nifty...I'll get one

CTScott should plan on making them for other vehicles...which
should be fairly easy...canbus standard frame messages....could sell thousands of them
cali yarisCanoga Park, CA · Sep 16, 2010#528
probably should update the first post with the new pricing estimate. Maybe even run a new poll, since the old one was based on a $75 target price. That would tell you how many realistically you'll need to make now.

I think it's a very nice piece and lots of people will still buy it.
CTScottThread starterUSA, CT · Sep 16, 2010#529
Originally Posted by cali yaris ↑
probably should update the first post with the new pricing estimate. Maybe even run a new poll, since the old one was based on a $75 target price. That would tell you how many realistically you'll need to make now.

I think it's a very nice piece and lots of people will still buy it.
Agreed on updating the first post to avoid confusion.

With the display that I am using, I don't hit price breaks until I am in the thousands, so I won't have to worry so much about minimum runs. With the original display, at quantity 100 it dropped from $20 to $6, so building a minimum of 100 was required to hit the price point.
47_MasoN_47Northwest Alabama · Sep 16, 2010#530
I'd pay extra for CTScott's YarGauge.
dean_parkWentzville, MO · Sep 16, 2010#531
A poll may not be a bad idea though on who wants it in the display bs the vent option now. If we are paying for the cool OLED and the clock module only gives 1/3 of the area of the vent, I may go vent if the text and bar graph are bigger. For $150-200, I'm still in.
daveprueCT, USA & Manila, Philippines · Sep 16, 2010#532
After seeing it in person yesterday, I will commit at any price up to $200.
swiddCentral Alabama, GOD BLESS AMERICA · Sep 16, 2010#533
I'll open a new credit card if I have to.
henry33slovakia · Sep 16, 2010#534
i want another video with full display usage :) please
PhillyGgeorgia · Sep 17, 2010#535
Originally Posted by swidd ↑
I'll open a new credit card if I have to.
i dunno bout that... but depending on final price and date of release.... i am in. jsut may have to save extra.. the little wifey doesnt let go of that much at once.. gotta save my milk money. oh but i am in...
IsLNdbOiLas Vegas, NV · Sep 17, 2010#536
Impressive. Can't wait to replace that boring, single function clock in my Yaris!
Nexus1155Dorchester · Sep 17, 2010#537
Well it essentially functions as a scanguage in itself. And anything that is built into a stock system looks so much sleeker than a scanguage mounted anywhere would. Plus, no wires anywhere out in the open. If its on par with the pricing on the scanguage and its integrated nicely it will sell just as well.

I know the OBD port has seperate functionality other than the features you are including. I know you are putting basic functions in there that common users will use but I saw you were adding a USB Port as well. Will you also be releasing the source code too? or make it reprogrammable to add different functions.

I do not know how much data you can program into this, but maybe you can make seperate "scripts" for sale that give the ability to use different functions with the gauge at a later date. Essentially you have reach to all of the OBD functions, i know it may just be a niche market, but it would be cool to see if it is reporting any knock/IAT/TPS etc.
KioshiFremont, CA · Sep 17, 2010#538
$150 sounds good to me..if us cluster swappers w/ tachs can have a method of mounting and using this ;)
advocatelocation · Sep 20, 2010#539
Originally Posted by Kioshi ↑
$150 sounds good to me..if us cluster swappers w/ tachs can have a method of mounting and using this ;)
I was wondering about this as well Scott. Any chance at a non-OEM mounting location or setup for those with a tach already and who'd like a different setup for AFR / voltage / MPG etc.

Also any chance the unit can display other stuff creatively with a bar graph? Like an AFR graph? An MPG graph that goes up to green for high MPG and down to red for low MPG?
47_MasoN_47Northwest Alabama · Sep 21, 2010#540
I believe he said at one point that you would be able to setup charts and whatnot via the USB interface and some software. It would be pretty sweet to have it on the main unit, but I'll probably be keeping a laptop hooked up to it anyway so that's fine with me.
jarrietaPhilippines · Sep 24, 2010#541
I'd bite that for $150
CTScottThread starterUSA, CT · Sep 24, 2010#542
Development around the new display is going well. This week I added air to fuel ratio. I am amazed at how responsive the Yaris' wideband sensors are. At some point this weekend I'll take some video of the AFR mode in action.
kaijyuAustralia · Sep 25, 2010#543
Is there any chance it will be compatable with the Oz cluster?
CTScottThread starterUSA, CT · Sep 25, 2010#544
Originally Posted by kaijyu ↑
Is there any chance it will be compatable with the Oz cluster?
There's no place to mount it within the OZ cluster, so you will need the vent mount version or the separately packaged version.
zachrybolesFt. Worth, Tx · Sep 26, 2010#545
Dear CTScott,
We at the Yaris World community would like to say thank you for the hard work that you put in each and every moment you are developing this awesome tool. Included with this thank you is a picture of the prize you have won. Picture not included in this copy Also included is what your prize will turn into if we dont have this beautiful piece of craftsmanship by christmas time. Picture not included in this copy

Love,
The entire Yaris World Community

P.S. Oscar bites!!!
CTScottThread starterUSA, CT · Oct 1, 2010#546
Another little update - Thanks to Toyota finally fixing a bug in TechStream, on 09's and older, ambient temperature now doesn't require tapping the wire to the AC amplifier.
PhillyGgeorgia · Oct 2, 2010#547
Originally Posted by CTScott ↑
Another little update - Thanks to Toyota finally fixing a bug in TechStream, on 09's and older, ambient temperature now doesn't require tapping the wire to the AC amplifier.
of course you know... this means absolutely nothing to me..but if you say it means something then i believe you. You are YarisGuru. Does this mean i have less wires to tap when i install it?
CTScottThread starterUSA, CT · Oct 2, 2010#548
Originally Posted by PhillyG ↑
of course you know... this means absolutely nothing to me..but if you say it means something then i believe you. You are YarisGuru. Does this mean i have less wires to tap when i install it?
Correct. I now have every function working by CAN message to the appropriate ECU, so for the clock replacement version, you literally will just plug the clock's power connector into the YarGauge, and connect just two wires to the cluster's connector.

Today I figured out the cruise control messaging, so I can now tell if cruise control is "on" or "set", just like the 09+ cluster.
dean_parkWentzville, MO · Oct 3, 2010#549
By 09 and older, do you mean 06,07,08? Or 09+? I only ask because you say it was a bug fix, so I assume it's 09 and newer.
CTScottThread starterUSA, CT · Oct 3, 2010#550
Originally Posted by dean_park ↑
By 09 and older, do you mean 06,07,08? Or 09+? I only ask because you say it was a bug fix, so I assume it's 09 and newer.
The 2010s and newer support the standard OBD request for ambient air. The 09's and older (06-09) did not, so on them I have to get the ambient air temp from the AC ECU. The bug fix was in the TechStream software, not in the car.