Ready for a beta tester yet? I can pop over on a moment's notice 🙂Originally Posted by CTScott ↑The 2010s and newer support the standard OBD request for ambient air. The 09's and older (06-09) did not, so on them I have to get the ambient air temp from the AC ECU. The bug fix was in the TechStream software, not in the car.
GI: "YarGauge" replacement clock module (Digital Tach, etc.)
737 posts · 304,493 views · page 12 of 15
Replies continued
Any new news on this yet? :)
I am just about done with the software for the unit itself. Now I am working on adding the functionality to be able to read and reset DTCs for all of the body ECUs (ABS, A/C, Body, Power Steering, Meter, TPWS, and SRS).Originally Posted by Shinare ↑Any new news on this yet? :)
Any thoughts on open/closed source code?
I don't know what kind of hardware its programmed on, but if there's any capabilities to customize/have fun with (like make it say 'SWIDD IS BAD DRIVER' when I turn on the car and say 'CALM DOWN SWIDD' when I speed), it could at least increase the justification for purchasing the USB cable, and/or give the community something to do.
I don't know what kind of hardware its programmed on, but if there's any capabilities to customize/have fun with (like make it say 'SWIDD IS BAD DRIVER' when I turn on the car and say 'CALM DOWN SWIDD' when I speed), it could at least increase the justification for purchasing the USB cable, and/or give the community something to do.
Originally Posted by swidd ↑Any thoughts on open/closed source code?
I don't know what kind of hardware its programmed on, but if there's any capabilities to customize/have fun with (like make it say 'SWIDD IS BAD DRIVER' when I turn on the car and say 'CALM DOWN SWIDD' when I speed), it could at least increase the justification for purchasing the USB cable, and/or give the community something to do.
I very well may disclose the protocol for the USB interface. The primary reason would be to allow those running something other than Windows to be able to write their own app, as my app with be for Windows.
If I need to be in the car with a laptop, then I'll need that software to run in linux, either with ported code or using Wine. But I also may not worry about it and use it as is :)
iphone app....
nah, just kidding.
nah, just kidding.
I will be using it as is as I do not own a laptop because I have no need/use for one.Originally Posted by swidd ↑If I need to be in the car with a laptop, then I'll need that software to run in linux, either with ported code or using Wine. But I also may not worry about it and use it as is :)
I wonder how many who are here that also do no have a laptop or who may actually have one. 🙂
After getting an iPhone I haven't used my laptop at all, its in the back of a closet collecting dust. But it could perhaps come out of the closet to play with the YarGauge.
In 4 1
I think I would be able to make a Linux version of the app if you were to release the source code. I'm currently in the process of learning Python, so this could be the perfect project for me to tackle. 👍Originally Posted by CTScott ↑I very well may disclose the protocol for the USB interface. The primary reason would be to allow those running something other than Windows to be able to write their own app, as my app with be for Windows.
I've done some iPhone and now iPad development. Eventually I'd like to add a WiFi interface and create a nice app for it.Originally Posted by swidd ↑After getting an iPhone I haven't used my laptop at all, its in the back of a closet collecting dust. But it could perhaps come out of the closet to play with the YarGauge.
That's what I was thinking - That if I publish the protocol for the USB comm, Linux, Mac, etc. people can write their own apps for it.Originally Posted by tk-421 ↑I think I would be able to make a Linux version of the app if you were to release the source code. I'm currently in the process of learning Python, so this could be the perfect project for me to tackle. 👍
That'll be swell! I'd be making myself a display with no clock, as I already have time shown on my stereo... I only want to see MPG, RPM, OAT and maybe something else...
I'm afraid the Yaris will rust into little pieces before you get it finished though!!
I'm afraid the Yaris will rust into little pieces before you get it finished though!!
Scott if you keep adding the functions it won't be done ever :(
That's what I said earlier in the thread.
CTScott
When do you think you ll be finish i would like to purchase one
When do you think you ll be finish i would like to purchase one
+1 been waiting for over a year now🙁
Originally Posted by blacks ↑CTScott
When do you think you ll be finish i would like to purchase one
Scott, no more functions, please? haha.
The JDM cluster i can wait for...but this? no more....no more....
The JDM cluster i can wait for...but this? no more....no more....
I think I've got all of the functionality done for the main device. Now, I am working on buttoning up the ability for the PC interface to be able to read and clear DTCs on the rest of the body ECUs. On Wednesday I received the last ECU that I was missing for my test bench (the ABS ECU), so I now have a completely functional Yaris network on my test bench.Originally Posted by Kioshi ↑Scott, no more functions, please? haha.
The JDM cluster i can wait for...but this? no more....no more....
No way.....what year is the abs ecu from?Originally Posted by CTScott ↑I think I've got all of the functionality done for the main device. Now, I am working on buttoning up the ability for the PC interface to be able to read and clear DTCs on the rest of the body ECUs. On Wednesday I received the last ECU that I was missing for my test bench (the ABS ECU), so I now have a completely functional Yaris network on my test bench.
I forget what, but did you need any model year ecu, or did it have to be specifically a 2008 abs ecu in order to figure out the jdm cluster even more?
And glad to hear your yargauge is in the final stage now.
The ABS ECU is off an 08. I still need an 08 ABS equipped ECM to sort out the JDM cluster issue.Originally Posted by Kioshi ↑No way.....what year is the abs ecu from?
I forget what, but did you need any model year ecu, or did it have to be specifically a 2008 abs ecu in order to figure out the jdm cluster even more?
And glad to hear your yargauge is in the final stage now.
I havent posted anything in the 33 page history of this thread... but just so you know... ive been waiting and its def on my bday/christmas/newyears list. def will be getting one that goes in the vent. :)
I do embedded stuff, I would love to see more info on this. Are you using pic/prop/or something else? Looks good though. I though of making one of these out of my ybox2, or a beagleboard I had laying around.
I am using two PICs - One is dedicated to handling the CAN Bus communication and the other drives the UI and deals with the analog signals.Originally Posted by Biff ↑I do embedded stuff, I would love to see more info on this. Are you using pic/prop/or something else? Looks good though. I though of making one of these out of my ybox2, or a beagleboard I had laying around.
all i want for christmas is my yaaaaaaaariiiiiguage.............. my yaaaaaaaaariiiguage..... my yaaaaaaaarrriiiiguage..... scott your a beast and we love you for developing this. I actually have a project id like your input on. if you would pm me your email and ill send you the details.
Will it be ready for Christmas?
I am hoping so. I got temporarily derailed again, as my wife has been cracking the whip on me to finish our master bathroom. 400 sq ft of floor to ceiling tiling has been absolute hell.Originally Posted by swidd ↑Will it be ready for Christmas?
Sew your video on YT, i think you have something current that might be profitable if produced correctly.
all the features are nice to have and what not. in my opinion its time to market with basic features as RPM, clock, OAT and GPH.
its like my old mentor always said: you have to know when to stop developing and get out to market (or you will keep optimizing and improving forever).
also i would recommend finding a country wide network of potential installers (for the faint of heart) to be included with the purchase.
and last please start a landing page with a pre order option (the "fans" will know its coming and you can learn to estimate the market potential and estimate manufacturing quantities...
i'm sure you thought of all this - i'm just jealous of your skills and I really need a tachometer for my wifes brand new Yaris.
all the features are nice to have and what not. in my opinion its time to market with basic features as RPM, clock, OAT and GPH.
its like my old mentor always said: you have to know when to stop developing and get out to market (or you will keep optimizing and improving forever).
also i would recommend finding a country wide network of potential installers (for the faint of heart) to be included with the purchase.
and last please start a landing page with a pre order option (the "fans" will know its coming and you can learn to estimate the market potential and estimate manufacturing quantities...
i'm sure you thought of all this - i'm just jealous of your skills and I really need a tachometer for my wifes brand new Yaris.
Can one find that in the fetish video section?...oh wait, there isn't one on YarisWorld..yet. 😁Originally Posted by CTScott ↑I am hoping so. I got temporarily derailed again, as my wife has been cracking the whip on me to finish our master bathroom. 400 sq ft of floor to ceiling tiling has been absolute hell.
Picture not included in this copyOriginally Posted by Revsson ↑Can one find that in the fetish video section?...oh wait, there isn't one on YarisWorld..yet. 😁
Oh my....LOLOriginally Posted by CTScott ↑Picture not included in this copy
Scott, I knew your wife was "cracking the whip" on you, but I had no idea she wore tall leather boots and a mask...
no wonder Scott's been too "busy" to complete this project......all these distractions!
Haven't been to the forums in a while but .. any updates on this?
I'm working on having the first batch ready before xmas.Originally Posted by devinlamothe ↑Haven't been to the forums in a while but .. any updates on this?
are you still going to beta test? (oh please, oh please, oh please)
How many for the first batch? and ideas on the final price?
Is there any way we can like pre order these? Or are we going to have to wait until you have some ready to pay :P
wow a fifteen month development thread, AND it's still cool and worth it.
Duke Nukem Forever?
I feel way to guilty taking peoples' money before I have something ready to ship in return.Originally Posted by devinlamothe ↑Is there any way we can like pre order these? Or are we going to have to wait until you have some ready to pay :P
You could do a Kickstarter. That way no money changes hands until its actually done.
I wish alot of other folks thought like you. ThanksOriginally Posted by CTScott ↑I feel way to guilty taking peoples' money before I have something ready to ship in return.
Is this available yet? 😕
do you have some new pix or video?
You could do a Kickstarter. That way no money changes hands until its actually done.I just discovered that. AWESOME IDEA.
No new pix or video at the moment, as the stuff I am working on right now is kind of boring visually. I'm working on reading and reseting the diagnostic codes on all of the CAN based subsystems (ABS, Power Steering, SRS, Air Conditioning, and Body ECU).Originally Posted by henry33 ↑do you have some new pix or video?
Hey, I love your new sig!
Is that "Crashy" on the left, before the mods? 🙂
Is that "Crashy" on the left, before the mods? 🙂
What year models will this be available for? I have a 09 sedan and would love to have one of these in mine...Awesome idea!