CTScott is like Nikola Tesla. We are like the audience being amazed the first time the World's Columbian Exposition in Chicago was illuminated by light bulbs all over the place. AMAZED.
GI: "YarGauge" replacement clock module (Digital Tach, etc.)
737 posts · 304,493 views · page 9 of 15
Replies continued
Any update on this? :)
I've found that the intense summer sun is really giving me a tough time with the readability of the LCD. I am back to searching for a more sunlight proof one. If you look at the gas gauge, it is readable 95% of the time. Unfortunately, to get that particular type of LCD, with that good of daylight readability, I would have to have a custom run done of a chip-on-glass LCD.
hows this going to change price if that's needed?
Well I've read the thread and I'm in. Thank you very much for putting the effort into this.
Ughhhh! Waiting for this is like waiting for a really important blood test.
Bump to keep this on the front page and at the top.
i agee
Keep the dream alive.
He's too busy answering other posts! (and playing on Facebook?) 😛
Hmmm. Maybe I can offer virtual YarGauges on Car Town...Originally Posted by Revsson ↑He's too busy answering other posts! (and playing on Facebook?) 😛
So is this project officially scrapped then?
I am back to searching for a more sunlight proof one.Anyone who would buy it just like it is, even with visibility problems, post up. I'm suggesting that CTScott could do a nice run of these, and then offer the "new/improved" version later.
I'll continue to wait. I'm a believer in and judging by the effort being put in by CT he is also that if you are going to do something, do it right the first time. I think that is what he is trying to accomplish here, hence the long wait so far. Speaking for myself, I can't really afford the just to get it out product and then turn around to get the new improved version.
I'll wait for the improved version as well.
I'll buy a first edition regardless of flaws. However I don't want to encourage it if it will delay a perfected version.
I'm running some pretty dark tint all around. If the features are the same, I'd pick one up today. I'd even take a hand reworked beta.Originally Posted by cali yaris ↑Anyone who would buy it just like it is, even with visibility problems, post up. I'm suggesting that CTScott could do a nice run of these, and then offer the "new/improved" version later.
I find that with the sunglasses I currently use, I can't see the clock.
Perhaps I need new sunglasses. 😛 However, I am hoping that
this YarGuage will be bright enough to handle the sun and a pair of sunglasses
such as I am using now.
So, I say keep working on it.
Perhaps I need new sunglasses. 😛 However, I am hoping that
this YarGuage will be bright enough to handle the sun and a pair of sunglasses
such as I am using now.
So, I say keep working on it.
I say we trust CTScott's judgement. 🙂
The display for the YarGauge may need to have the similar qualities as the Gas gauge, maybe adding a brighter background and contrast adjustment to the LCD it self may help 🤷
The clock is a VFD, which is one of the highest contrast type of devices. It might be a polarizing thing though, as to why it doesn't work with your sunglasses.Originally Posted by Revsson ↑I find that with the sunglasses I currently use, I can't see the clock.
Perhaps I need new sunglasses. 😛 However, I am hoping that
this YarGuage will be bright enough to handle the sun and a pair of sunglasses
such as I am using now.
So, I say keep working on it.
The gas gauge is a chip-on-glass LCD, but it has a great contrast ratio, that is better than anything I can find off the shelf, that will fit in the required area. The display I am using now is good in all conditions except really bright sun, but in that condition it is nearly unreadable.
I am working on getting a quote for a short run of higher contrast ratio COG LCDs to see if I can justify doing a run with those. In the meantime, I am nearing the point where I am going to put out a couple to have people run them and give some feedback.
I volunteer!
+1 on that. I volunteer also.Originally Posted by bobselectric ↑I volunteer!
You might want to check out alibaba if you haven't already for a suitable screen to keep costs down, I learned over time that you can perhaps source it, if not find something similar and contact them. Keep costs down for yourself.
http://www.alibaba.com/product-gs/27...D_Display.html
http://www.alibaba.com/product-gs/27...D_Display.html
Funny... I had to google VFD because I always use the term to mean variable frequency drive.
There are some really good alternative acronym definitions here:
http://www.acronymfinder.com/VFD.html
Personally, I think you must be referring to very fancy dollies.
There are some really good alternative acronym definitions here:
http://www.acronymfinder.com/VFD.html
Personally, I think you must be referring to very fancy dollies.
In the meantime, I am nearing the point where I am going to put out a couple to have people run them and give some feedback.That is a very good idea.
I'll volunteer as well!
hrmm.. if you need a volunteer in ga.. let me know.
Volunteer here in the hot Kansas sun.......
Volunteer from NE PA. I can drive to your laboratory and make my dash available to you.
a lot of samplers.
CTScott, whats the duration, (how many miles driving with one) are you are looking at for a through feedback on these?
Since I've already swapped to the RS cluster and have a 1800 mile variation from stock mileage on the car~
CTScott, whats the duration, (how many miles driving with one) are you are looking at for a through feedback on these?
Since I've already swapped to the RS cluster and have a 1800 mile variation from stock mileage on the car~
Shoot I will actually pay as oppose to volunteering
I offer a pint of ice cream.
I was "volunteering" to buy and give a review.
What I'll most likely do is install 2-3 in relatively local cars. That way, if they find any issues that require software fixes, I can easily reflash them.
So who's moving to Connecticut with me? uuuuhaul!
central NJ close enough Scott?
If it's a serial reflash, I should be able to handle it. I'm a mechanical engineer but I dabble on the sparky stuff.. I do flash firmware on a lot of our equipment and our vendors equipment. I'm also originally from RI (even lived in Middletown CT for a year), so I used to be local....eh, probably doesn't help.
Should I just send my resume for consideration? lol
Should I just send my resume for consideration? lol
The YarGauge uses two microcontrollers - One for the display and analog inputs and the other for the CAN bus communications. The CAN bus one requires a JTAG interface for programming.Originally Posted by dean_park ↑If it's a serial reflash, I should be able to handle it. I'm a mechanical engineer but I dabble on the sparky stuff.. I do flash firmware on a lot of our equipment and our vendors equipment. I'm also originally from RI (even lived in Middletown CT for a year), so I used to be local....eh, probably doesn't help.
Should I just send my resume for consideration? lol
I live in Dayville ct and am willing and able to be a test subject. Ok not me but my car.
I'll volunteer! I live one town north of where you bought your car in south central MA. My 08 LB is best 14K I ever spent. I'm also very familiar with the tech side.
Hrmm I'm all the way in california but we use JTAG here at work to program our drives!
Noobs to the back of the line! 😈Originally Posted by CheapOldGuy_v1.1 ↑I'll volunteer! I live one town north of where you bought your car in south central MA. My 08 LB is best 14K I ever spent. I'm also very familiar with the tech side.
j/k 😁
I have a USB JTAG Cable, I would buy a full working product when it comes out if it integrates nicely, I just can't tear apart my gf car just to test stuff :( Wish I could.
I hope these are finally available by Christmas!
I found a new LCD this week that I am hoping will overcome the sunlight visibility issue. It is an OLED display, which is supposed to have excellent sunlight visibility. I should be receiving my sample this week to test.
Good to hear. I thought those things were in very short supply. How does using an OLED display affect the final price?
OLED displays are finally becoming readily available and no longer crazy expensive. The original LCD was costing me $12 and the OLED is $72 in quantity, but to have true daylight readability will be worth the extra cost. This display was over $200 when I looked at it a year ago.Originally Posted by IsLNdbOi ↑Good to hear. I thought those things were in very short supply. How does using an OLED display affect the final price?
Standalone devices like the scangauge can get away with <$10 LCDs, because of location. The killer for the YarGauge is having it recessed behind the smoked plastic of the cluster.
A non smoked lens will do the job as well right? maybe finding some way of reproducing the same lens but in clear and at the same time everything else will be mo readable during the day 😲 what will be cheaper the OLED display?Originally Posted by CTScott ↑OLED displays are finally becoming readily available and no longer crazy expensive. The original LCD was costing me $12 and the OLED is $72 in quantity, but to have true daylight readability will be worth the extra cost. This display was over $200 when I looked at it a year ago.
Standalone devices like the scangauge can get away with <$10 LCDs, because of location. The killer for the YarGauge is having it recessed behind the smoked plastic of the cluster.
Unless it is Super-AMOLED, which I highly doubt, you have it backwards.
OLED displays are very nice and produce rich colors and deep blacks, but their worst flaw is daylight visibility, which is pretty weak. I wish OLED had great visibilty in the sun but they do not. The reason being is there is no backlight which is found on a traditional LCD. Instead, it uses a bioelectrical chemical to light and this washes out badly in the sun.
Just warning you before you make a mistake and buy them.
OLED displays are very nice and produce rich colors and deep blacks, but their worst flaw is daylight visibility, which is pretty weak. I wish OLED had great visibilty in the sun but they do not. The reason being is there is no backlight which is found on a traditional LCD. Instead, it uses a bioelectrical chemical to light and this washes out badly in the sun.
Just warning you before you make a mistake and buy them.