Replies continued
MGarganoThread starterNJ · Aug 9, 2009#151...and the right side front...
Picture not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#152...and last, but certainly not least, the right side rear sensor...
Picture not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#153Sorry... I'm all done gloating and ready for instructions 😆
CTScottUSA, CT · Aug 9, 2009#154 Originally Posted by
MGargano ↑ Sorry... I'm all done gloating and ready for instructions 😆
Look up to #151.
MGarganoThread starterNJ · Aug 9, 2009#155Ok, so red lead to 1, 2, and 3 and black lead to ground?
CTScottUSA, CT · Aug 9, 2009#156 Originally Posted by
MGargano ↑ Ok, so red lead to 1, 2, and 3 and black lead to ground?
Yes
MGarganoThread starterNJ · Aug 9, 2009#157 Originally Posted by
CTScott ↑ Yes
Still nothing. I plugged all 4 sensors in and tested each.
ChinoCharlesOH · Aug 9, 2009#158Picture not included in this copy1 attachment not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#159LOL I'm really glad everyone's this thread so much. I had no idea it would turn into a 150+ post affair but I'm really enjoying this and can't wait to see it through
CTScottUSA, CT · Aug 9, 2009#160 Originally Posted by
MGargano ↑ Still nothing. I plugged all 4 sensors in and tested each.
Hmmm. The only thing I can think of is that maybe with the side squibs being open circuits (with the too high resistor value), that the OC is disabled. Let's hold off until you get the 3 ohm resistors and get them hooked up.
MGarganoThread starterNJ · Aug 9, 2009#161 Originally Posted by
CTScott ↑ Hmmm. The only thing I can think of is that maybe with the side squibs being open circuits (with the too high resistor value), that the OC is disabled. Let's hold off until you get the 3 ohm resistors and get them hooked up.
Ok. It might be a few days since I ended up having to order them online. I think those resistors might make a difference since the passenger's seat belt light is lit too and all that stuff is connected together.
cali yarisCanoga Park, CA · Aug 9, 2009#162well, crap, what are we supposed to do while we're waiting?
MGarganoThread starterNJ · Aug 9, 2009#163 Originally Posted by
cali yaris ↑ well, crap, what are we supposed to do while we're waiting?
Figure out a way for me to mount the OEM sensors to the new seat so they function properly?
CTScottUSA, CT · Aug 9, 2009#164 Originally Posted by
MGargano ↑ Figure out a way for me to mount the OEM sensors to the new seat so they function properly?
Since you have them off of the seats now, let's see some pics of all sides of one.
MGarganoThread starterNJ · Aug 9, 2009#165This is #61- right side rear sensor:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#166...and this is the right side front, #037:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#167Those senors are connected to those black brackets by two screws and this...:
Picture not included in this copy
MGarganoThread starterNJ · Aug 9, 2009#168Some close-ups of the sensor with it's clothes off:
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
CTScottUSA, CT · Aug 9, 2009#169Wow, they really didn't design them to be easily transferred to other seats.
MGarganoThread starterNJ · Aug 9, 2009#170 Originally Posted by
CTScott ↑ Wow, they really didn't design them to be easily transferred to other seats.
They sure didn't; especially considering how the rear brackets are designed. Without the rear sensors and their brackets, the OEM seat and bracket/rail can't be held together. The rear sensor/bracket is the only piece with threaded holes, holding the whole thing together. So the seat depends on the sensors and vice versa. With all four sensors out, there's nothing holding the bracket to the bottom of the seat.
CTScottUSA, CT · Aug 9, 2009#171To be able to take the weight measurements they need to be between the seat and the floor. Once we get the sensor bypass figured out, the next step will be adding our own method of deciding whether or not the airbag should be armed. It could be as simple as a switch you have to flick or as complex as a set of round load cells that look like washers that would be mounted under the aftermarket seats.
MGarganoThread starterNJ · Aug 9, 2009#172I'm really glad you haven't given up on this yet! I'd be totally screwed without your help and I really appreciate all this. You totally rock!
CTScottUSA, CT · Aug 9, 2009#173I live for this kind of wacky stuff.
mrrockct · Aug 9, 2009#174I have been reading too and it really has helped. don't mind the switch idea.
Most of the time I would just like it on as the only other passenger is my wife.
You really have been great to spend as much time to help out.
Even all the stalkers thank you
vtencolumbus · Aug 11, 2009#175update please :D ....this thread is making me affraid to install my recaros :(
CTScottUSA, CT · Aug 11, 2009#176We're waiting for his 3 ohm resistors to arrive for bypassing the side airbags.
MGarganoThread starterNJ · Aug 11, 2009#177 Originally Posted by
CTScott ↑ We're waiting for his 3 ohm resistors to arrive for bypassing the side airbags.
Resistors shipped yesterday... should have them some time between tomorrow and Friday.
MGarganoThread starterNJ · Aug 11, 2009#178To test the voltage going to the sensors, can't I touch the red lead of the multimeter to the silver rivets (?) near the GND, OUT, VCC?
MGarganoThread starterNJ · Aug 11, 2009#179Picture not included in this copy
CTScottUSA, CT · Aug 11, 2009#180Now that you have the cover off you sure can. You can hold the black lead on the head of that phillips head screw (which is connected to ground) and touch the red to VCC and OUT.
Just be mighty careful not to touch two at the same time.
MGarganoThread starterNJ · Aug 11, 2009#181 Originally Posted by
CTScott ↑ You can hold the black lead on the head of that phillips head screw (which is connected to ground)
The philip's head screw all the way at the top left of the pic? Or the rivet next to GND?
CTScottUSA, CT · Aug 11, 2009#182The screw in the top left. If you look at the PCB a trace connects it to ground. When working with two probes I like to have one one something that it won't easily slip off of, like a screw head.
MGarganoThread starterNJ · Aug 11, 2009#183 Originally Posted by
CTScott ↑ The screw in the top left. If you look at the PCB a trace connects it to ground. When working with two probes I like to have one one something that it won't easily slip off of, like a screw head.
Beautiful. I'll give this a try and report back.
MGarganoThread starterNJ · Aug 11, 2009#184No dice... still no voltage 🙁 I guess I'll have to wait for those 3 ohm resistors
CTScottUSA, CT · Aug 11, 2009#185 Originally Posted by
MGargano ↑ No dice... still no voltage 🙁 I guess I'll have to wait for those 3 ohm resistors
Those points are where the connector is soldered to the PCB, so you shouldn't have seen anything different than we were seeing the other day. I thought you were asking because Santa came early.
MGarganoThread starterNJ · Aug 11, 2009#186 Originally Posted by
CTScott ↑ Those points are where the connector is soldered to the PCB, so you shouldn't have seen anything different than we were seeing the other day. I thought you were asking because Santa came early.
Unfortunately not...Santa's gotta come all the way from WI to NJ. Shouldn't be any later than Friday.
vtencolumbus · Aug 16, 2009#187did you get the resistor yet? any update?
MGarganoThread starterNJ · Aug 16, 2009#188 Originally Posted by
vten ↑ did you get the resistor yet? any update?
I'm really disappointed in the place I ordered them from. Their website shows the resistors as 'shipped' on Monday but I still haven't received them as of today (Saturday) so I hope to have them Monday.
CTScottUSA, CT · Aug 16, 2009#189Which place did you order them from?
MGarganoThread starterNJ · Aug 16, 2009#190 Originally Posted by
CTScott ↑ Which place did you order them from?
VetcoElectronics.com. And I paid out the a$$ since it was such a small order... $16.82 for 4 resistors
CTScottUSA, CT · Aug 16, 2009#191Dang! I should have just dropped some of the ones I have laying around in an envelope and dropped them in the mail. You would have had them in a day or two for the cost of a stamp.
MGarganoThread starterNJ · Aug 16, 2009#192 Originally Posted by
CTScott ↑ Dang! I should have just dropped some of the ones I have laying around in an envelope and dropped them in the mail. You would have had them in a day or two for the cost of a stamp.
Yeah.. big mistake on my part. I know better now! 😆
MGarganoThread starterNJ · Aug 17, 2009#193Resistors are finally here! This project is officially back on track!
AdeJong 03LA, CA · Aug 17, 2009#194nice man! keep us updated
MGarganoThread starterNJ · Aug 17, 2009#195This is a 3 ohm, 1/2 watt resistor, right?
Picture not included in this copy
MGarganoThread starterNJ · Aug 17, 2009#196Nothing so far. I plugged the 3 ohm (presumably) resistors into the airbag sensors, turned the key, and all lights are still lit. Also, still no voltage to the weight sensors. I disconnected the battery and will try again in a few minutes, but I'm thinking maybe the SRS system needs to be reset/cleared.
cali yarisCanoga Park, CA · Aug 17, 2009#197more than a few -- I've heard Toyota techs wait 20 to make sure the SRS system resets (it has it's own battery, btw)
CTScottUSA, CT · Aug 17, 2009#198Correct on the resistors. Garm is correct on the reserve power for the SRS ECU.
MGarganoThread starterNJ · Aug 17, 2009#199 Originally Posted by
cali yaris ↑ more than a few -- I've heard Toyota techs wait 20 to make sure the SRS system resets (it has it's own battery, btw)
😆 I figured that out first-hand. I pulled the battery for about 10 minutes, reconnected, and still nothing. It's been pulled about an hour or so now. Think it's time for a second attempt?
MGarganoThread starterNJ · Aug 17, 2009#200Is there a definite answer for how long it takes the SRS ECU to reset itself with a battery disconnect? I want to make sure all the SRS reserve power is drained before trying this again.