Yarisworld Archive

Looking at seats...

318 posts · 113,151 views · page 7 of 7

Replies continued

lilredrocketDFW, Texas · Aug 25, 2009#301
Looks great!!! You do really good work
heeroyuy01195Florida · Aug 25, 2009#302
this is awesome! Scott...you are the man! subscribed :)
MGarganoThread starterNJ · Aug 25, 2009#303
Originally Posted by CTScott ↑
So, here is the completed module that I am shipping to you. With clipping the connector from the original harness, it makes for a very neat installation. The wire for the switch is 4 feet long, which is way more than enough to reach the console, where you intend to install your switch. The switch in the picture is just one that I popped on for testing.

Attachment 27606
That looks amazing!!! Thanks so much!
MGarganoThread starterNJ · Aug 26, 2009#304
Got the module today and this thing is HOT! I'm assuming I just need a 12 volt on/off switch to arm/disarm?
CTScottUSA, CT · Aug 26, 2009#305
Originally Posted by MGargano ↑
Got the module today and this thing is HOT! I'm assuming I just need a 12 volt on/off switch to arm/disarm?
Any switch will do, as it is switching 5 volts with no current. If you use an illuminated switch, just make sure that the illumination has separate contacts from the switching.
MGarganoThread starterNJ · Aug 26, 2009#306
I just finished the install and the module is working 100% perfectly! SRS light went out immediately and the passenger's airbag and seat belt lights are functioning like OEM.

CTScott... you, sir, are without a doubt THE MAN!
lilredrocketDFW, Texas · Aug 26, 2009#307
Ok now for the final install pics!!!!
MGarganoThread starterNJ · Aug 26, 2009#308
Originally Posted by lilredrocket ↑
Ok now for the final install pics!!!!
I'm actually house-sitting for a friend this week until next Monday, but I'll definitely post install pics when I get back home to my camera.
1NZYaris1New Zealand · Aug 26, 2009#309
Originally Posted by MGargano ↑
I'm actually house-sitting for a friend this week until next Monday, but I'll definitely post install pics when I get back home to my camera.
Now your letting the team down 😆
Malaya1221Torrance, Ca · Aug 26, 2009#310
try reading through the pages....anyone could do a DIY and when the module of ctscott will be available for us to purchase? thanks!
MGarganoThread starterNJ · Aug 26, 2009#311
Originally Posted by Malaya1221 ↑
try reading through the pages....anyone could do a DIY and when the module of ctscott will be available for us to purchase? thanks!
At this point a DIY is kind of unnecessary since the only way to get everything working is CTScott's module, which literally takes second to plug in.

Aside from his module, there's really no other way to get the system to function like OEM, unless you figure a way to mount the weight senors to your new seat/bracket.
CTScottUSA, CT · Aug 26, 2009#312
Originally Posted by Malaya1221 ↑
try reading through the pages....anyone could do a DIY and when the module of ctscott will be available for us to purchase? thanks!
Picture not included in this copy

I am trying to purchase the bare OEM OC ECU connector. If I can indeed get them, then the purchased modules will all look like the one above that I shipped to Mike. If I can't get the connectors, then the module will have six color matched wires that will need to be connected to the same colored wires on the OEM harness. Another pair of wires will exit the module separately (as in the pic above) and will connect to a user supplied switch.

I can make one-offs now and ship them as I did for Mike.
AdeJong 03LA, CA · Aug 27, 2009#313
scott i am interested in a module if youd like to make one

are you planning to make a bunch for garm?
BubblesMinnesota · Aug 27, 2009#314
interested as well
CTScottUSA, CT · Aug 27, 2009#315
Garm an I haven't sorted out the details yet. In the meantime I can make one-offs for people. I am trying to order the gray connectors so that they are plug-n-play. I am not sure if I am actually going to be able to. In the meantime, If you ship me your harness (the 5 legged one that goes from that gray connector to the four weight sensors, I can clip the connector and make a plug-n-play one, like I did for Mike, with his harness. I leave enough wire on either end, when I snip it, to allow you to be able to splice it back together, if you ever decide to return to the OEM seats. Also, the harness is an orderable part from Toyota for about $40, so that is another option for returning to OEM.
AdeJong 03LA, CA · Oct 10, 2009#316
figure i should post in this thread as well

i got your bypass switch and installed it. works like a charm except on the gauge cluster the airbag light is still on (light with a person sitting and airbag going off) not the seatbelt light.

anyway to address that? i have the seat ecu, bypass switch, and seat buckle plugged in. yellow connector is still on stock seat though i dont know what that does
CTScottUSA, CT · Oct 10, 2009#317
Originally Posted by AdeJong 03 ↑
figure i should post in this thread as well

i got your bypass switch and installed it. works like a charm except on the gauge cluster the airbag light is still on (light with a person sitting and airbag going off) not the seatbelt light.

anyway to address that? i have the seat ecu, bypass switch, and seat buckle plugged in. yellow connector is still on stock seat though i dont know what that does
That's the airbag connector. You need to plug a 3 ohm resistor into the yellow connector on both seats to make the SRS believe that the side airbag is still there.
hayriderAZ · Aug 14, 2020#318
Originally Posted by CTScott ↑
Garm an I haven't sorted out the details yet. In the meantime I can make one-offs for people. I am trying to order the gray connectors so that they are plug-n-play. I am not sure if I am actually going to be able to. In the meantime, If you ship me your harness (the 5 legged one that goes from that gray connector to the four weight sensors, I can clip the connector and make a plug-n-play one, like I did for Mike, with his harness. I leave enough wire on either end, when I snip it, to allow you to be able to splice it back together, if you ever decide to return to the OEM seats. Also, the harness is an orderable part from Toyota for about $40, so that is another option for returning to OEM.
Mr CTScott,
Per my conversations with an engineer at Toyota the COMPLETE safety system (this includes the seatbelts) will not operate if the airbag light in the dash is on! I thought the Toyota engineer was pulling my leg so I would go to the dealer. He’s correct per the two service writer’s I talked too at two different dealerships. I don’t give a shit about me but I do care about my wife and family‼️
For Pete sake help us out...I put back the stock seats but I sold them. I purchased FRS seats with Airbags because I wanted my family to be safe...

Help me please!