A couple of people have purchased OEM stalks and will be installing them. Hopefully one will document the process for those interested.Originally Posted by regal ↑very cool, but is there a tutorial for thos of us who want to you the OEM stock to keep it stock looking? Sounds a much better way to go that the $220 aftermarket option.
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag
293 posts · 385,443 views · page 2 of 6
Replies continued
I don't have the electrical wiring diagrams for the European Yaris to verify that all is the same as for our USDM ones.Originally Posted by suiller ↑above all can we do on 2009 model??
well. this is ehat i have.Originally Posted by CTScott ↑Does your 07 have the brown and blue wires in the D3 connector?
Also, does it have the cruise indicator on the combination meter?
If it doesn't have the D3 wires, then it will require the work that nickhjort did on page 16 of the other thread. Once all of the trial and error is sorted out in the other thread we'll put together a DIY for Yaris which need the additional work.
thats my D3 connector. i'm sure its the right one because is tried to honk after disconnecting it.
i do have a brown and blue wire but seems they are not in the mentiond above terminals. or is it?
click on the images to see in supersize
Picture lost · www.got2pic.com
and there are somepictures of the display. i couldent find the cruise controll light or set light. maybe you'll find.
Picture lost · www.got2pic.com
Picture lost · www.got2pic.com
Picture lost · www.got2pic.com
i did manage to pull out the A21 connector to see if there is the specific wire inside but got stuck with the L shape plastic wich cover the wires? there is a way to pull it out without breking it?
help please🙇
mariann,
It's pretty straight forward. Just cut the ziptie at the top of the cover VERY CARFULLY! Do not cut any of the wires, obviously, or you will be SOL big time. After cutting the ziptie, there are two clips on the left side of the cover. push them in and lift. Then you will see two hooks on the back of the cover, life the cover and pull so that hooks release. And to reinstall the cover just do the opposite. You will have to have a ziptie to replace the one you cut. If you don't have a ziptie, the clips and hooks will hold the cover in place, but the wires undernieth will be hanging loose. Here's some pics...hope they help.
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
It's pretty straight forward. Just cut the ziptie at the top of the cover VERY CARFULLY! Do not cut any of the wires, obviously, or you will be SOL big time. After cutting the ziptie, there are two clips on the left side of the cover. push them in and lift. Then you will see two hooks on the back of the cover, life the cover and pull so that hooks release. And to reinstall the cover just do the opposite. You will have to have a ziptie to replace the one you cut. If you don't have a ziptie, the clips and hooks will hold the cover in place, but the wires undernieth will be hanging loose. Here's some pics...hope they help.
Picture lost · i236.photobucket.com
Picture lost · i236.photobucket.com
thanks nickhjort. you really helped me.
any advice to my previuse post? can i connect the swich assembly directly to some wires on D3 connector or i'll need to run a wire through the firewall directly to the ECM an nichhjort did. the model is SOL 2007 liftback/hatchback european style(located in israel)
any advice to my previuse post? can i connect the swich assembly directly to some wires on D3 connector or i'll need to run a wire through the firewall directly to the ECM an nichhjort did. the model is SOL 2007 liftback/hatchback european style(located in israel)
Does you SOL have radio controls on the steering wheel? If so, I believe that the three wires shown in your picture are for that purpose. In your picture, Pin 1 and Pin are empty, so you will need to wire to the ECM, as nickhjort did.Originally Posted by mariann ↑thanks nickhjort. you really helped me.
any advice to my previuse post? can i connect the swich assembly directly to some wires on D3 connector or i'll need to run a wire through the firewall directly to the ECM an nichhjort did. the model is SOL 2007 liftback/hatchback european style(located in israel)
i dont have radio controll or shift controll on my steering wheel. the only thing i got is the horn and the airbagOriginally Posted by CTScott ↑Does you SOL have radio controls on the steering wheel? If so, I believe that the three wires shown in your picture are for that purpose. In your picture, Pin 1 and Pin are empty, so you will need to wire to the ECM, as nickhjort did.
i wonder what thoes wire for.
anyway. i hope i'll buy the swiches and resistors today and even install them (or tomorow). seems really easey. i'm preety good with wires throught the firewall, did it befor.
wish me luck
If you push once to turn the cruise switch on. Then turn off the car, and turn the car back on again. Is cruise still on?Originally Posted by CTScott ↑Correct. That's what I did with mine. In any vehicle that I've had with cruise, I never find myself using the tap up/down or coast/resume, so I just went with two switches.
No. It resets with the ignition.Originally Posted by stran ↑If you push once to turn the cruise switch on. Then turn off the car, and turn the car back on again. Is cruise still on?
it a wired question but...
i understand the on/off buton is for turning the cruise controll on and off
so whats the set button does? why i need two buttons? any one can explain me how to work with cruise controll?
i understand the on/off buton is for turning the cruise controll on and off
so whats the set button does? why i need two buttons? any one can explain me how to work with cruise controll?
On/Off turns the cruise control mode on or off.Originally Posted by mariann ↑it a wired question but...
i understand the on/off buton is for turning the cruise controll on and off
so whats the set button does? why i need two buttons? any one can explain me how to work with cruise controll?
Set selects the desired speed (above 25mph).
So, you can turn it on at any time, then, once you want to be in cruise mode, you attain your desired speed, and press the set button. At that point you can take your foot off of the accelerator.
To resume manual speed control, you either press the on/off button or touch the brake pedal.
The on/off button just enables the cruise control. When you push the set button, that's when the ecm know what speed to keep the engine cruising at. Usualy right when i turn my car on I hit the cruise on/off button. Then when I hit the highway and get to the speed I want, I hit the set button and the car remains at that speed. The way CTScott set up the two button system (I have them set up the same way and have tested this), you can also use the set button as the -1mph button...meaning if you're cruise is set at a certain speed and you want it to be just a little bit slower, whenever you hit the set button again it will decrease the speed 1mph. Or you can hold the set button and you will start coasting and when you slow down to your desired speed, you let go of the set button and it will remain at whatever speed you were at when you let go. Hope this explains it well enough mariann.
Or hit the clutch once you install the clutch switch am I right?Originally Posted by CTScott ↑To resume manual speed control, you either press the on/off button or touch the brake pedal.
Correct.Originally Posted by nickhjort ↑Or hit the clutch once you install the clutch switch am I right?
Does anyone have the instructions for the clutch switch for 09 5spd?
Thanks Scott! Now I have a summer project to keep me busy!
Thanks Scott! Now I have a summer project to keep me busy!
Check this out. It's for a Matrix, but the Yaris one is identical in looks and mounting:Originally Posted by andru47 ↑Does anyone have the instructions for the clutch switch for 09 5spd?
Thanks Scott! Now I have a summer project to keep me busy!
http://matrixowners.com/index.php?ac...r&f=23&t=71247
i got the parts. i finish building the prototype (not gonna drill button holes in my dashboard if it will not work. right?
and found that the store gave me N.C buttons insted N.O... i'll drive there tomorow.
any way. i hope the last question. one wire goes to the ECM pin 40 and the other to the ground? or pozitive?
by looking at the schematics its shuld go to the ground. but last chack with you guys if i right.
hope i'll install it tomorow
and found that the store gave me N.C buttons insted N.O... i'll drive there tomorow.
any way. i hope the last question. one wire goes to the ECM pin 40 and the other to the ground? or pozitive?
by looking at the schematics its shuld go to the ground. but last chack with you guys if i right.
hope i'll install it tomorow
The other wire goes to a ground point, yes.
Snapping the clockspring is a big concern. Very fragile piece. Airbag: not so much. Too many fail-safes built-in due to liability concerns.Originally Posted by CTScott ↑No. It mounts under them, and the connector for the spiral cable is buried under there as well. Removing them is not a huge deal, it just requires some caution and care to not pop the airbag or break the clockspring.
I'd like to do this mod to my '08 HB with no CC wiring or dash symbol. I'll run a wire from the ECM A21 connector @ position #40 then to the aftermarket on/off cruise switch.
My question is this: I'd like to have an LED light to indicate when the "cruise control" is "on." Where can I find a hot wire for the LED?
My question is this: I'd like to have an LED light to indicate when the "cruise control" is "on." Where can I find a hot wire for the LED?
The real cruise light is controlled by the combination meter, which gets the info about cruise mode over the CAN bus from the ECM, so there's no easy wire to connect the LED to.Originally Posted by expo2 ↑I'd like to do this mod to my '08 HB with no CC wiring or dash symbol. I'll run a wire from the ECM A21 connector @ position #40 then to the aftermarket on/off cruise switch.
My question is this: I'd like to have an LED light to indicate when the "cruise control" is "on." Where can I find a hot wire for the LED?
I thought perhaps there was a vacant ECU connector position that was used by the CAN bus to send juice to the dash light when the cruise was activated.
I thought perhaps there was a vacant COMBINATION METER connector position that was used by the CAN bus to send juice to the dash light when the cruise was activated.
nickhjort pulled apart his cruise-indicator-free combo meter and I had him check the outputs of the IC that drives the LEDs, before and after activating cruise. The hope was that we'd find an unused output that would be used to drive the cruise LED if present. Unfortunately, no such luck.Originally Posted by expo2 ↑I thought perhaps there was a vacant COMBINATION METER connector position that was used by the CAN bus to send juice to the dash light when the cruise was activated.
I'm confused. I've seen someone ask if this can be done on an 08 Yaris LB with no cruise light on the dash, but haven't seen a solid answer. provided I tap the ECM as mentioned earlier, I should be able to do this mod just with no indicator, correct? The ECM cruise programming is there regardless, right?
Correct. Nickhjort has proven that it will work on 07-08 Yaris which do not have the indicator, by directly connecting the the ECM.Originally Posted by PatrickJohnson ↑I'm confused. I've seen someone ask if this can be done on an 08 Yaris LB with no cruise light on the dash, but haven't seen a solid answer. provided I tap the ECM as mentioned earlier, I should be able to do this mod just with no indicator, correct? The ECM cruise programming is there regardless, right?
Subscribed
I used to have a Pontiac with cruise control and no indicator lights. In my experience, there's no light actually needed - it's quite obvious whether the cruise is on or off simply from how the car behaves. As for the "Set" light, you'll know immediately if the speed isn't set because the car slows down when you take your foot off the gas.
I'm going to install cruise on my '08 with the proper switch and very tidy wiring when I get around to it. The goal is to make a sufficiently tidy installation that even a Toyota tech will think it's factory, and it will take a lot of looking to prove otherwise.
However, I'm not even going to try for indicator lights. It would be nice, but you don't really need them.
I'm going to install cruise on my '08 with the proper switch and very tidy wiring when I get around to it. The goal is to make a sufficiently tidy installation that even a Toyota tech will think it's factory, and it will take a lot of looking to prove otherwise.
However, I'm not even going to try for indicator lights. It would be nice, but you don't really need them.
OK, almost have the cruise install complete. I have the 08 Yaris LB with no cruise light on the dash. I tapped the ECM a-21 connector @ position 40 and ran the wire to the cruise on/off switch on the dash.
Last question: How do I wire the new clutch switch I just installed? Does the wire from the ecm go to the clutch switch first, and then continue to the cruise on/off switch on the dash?
Last question: How do I wire the new clutch switch I just installed? Does the wire from the ecm go to the clutch switch first, and then continue to the cruise on/off switch on the dash?
Where can I obtain one of those clutch switches? As cheap as possible please :)
expo2, no you do not put the clutch switch in series with the cruise circuit. In fact you put it in series instead of the jumper wire stated on page 21 of this "DIY" HERE
See my post...#371.
Instead of placing the jumper wire in those two slots (as shown in the pics), simply go from one slot to the clutch switch, then back to the other slot.
Try to picture your clutch switch in place of my fuse in the pictures.
I will be making my own clutch switch tomorrow and I will take plenty of pics.
Hope this helps :)
See my post...#371.
Instead of placing the jumper wire in those two slots (as shown in the pics), simply go from one slot to the clutch switch, then back to the other slot.
Try to picture your clutch switch in place of my fuse in the pictures.
I will be making my own clutch switch tomorrow and I will take plenty of pics.
Hope this helps :)
Dah, I feel like an idiot and then some. I don't know how I missed your original pics of the clutch switch jumper wires.
Thanks for your help.
Thanks for your help.
No problem. Glad to help :) I will be starting my custom clutch switch here shortly. I have to go find a switch. Then I'll post pictures later this evening.
See post #387 HERE
This is the only mod I've ever done that involved the ECM, can someone kindly enlighten me as to it's location? I believe it is in the engine compartment, right?
Exactly - it's on the right side of the engine compartment.Originally Posted by PatrickJohnson ↑This is the only mod I've ever done that involved the ECM, can someone kindly enlighten me as to it's location? I believe it is in the engine compartment, right?
pardon my ignorance, do you mean right as in while you are in the car or right as though you are facing the engine compartment while standing at the front of the car? 😳Originally Posted by Sir A.Y. Atoyot ↑Exactly - it's on the right side of the engine compartment.
Driver's sideOriginally Posted by PatrickJohnson ↑pardon my ignorance, do you mean right as in while you are in the car or right as though you are facing the engine compartment while standing at the front of the car? 😳
Right side of the car as you sit in the driver's seat - the passenger side, in other words.
Attached picture not available
Attached picture not available
- 23833 · not saved
Passenger's side in the engine bay. Also my clutch switch works perfectly. It truly is a frankenstein though. I will take some pics tomorrow when it's light outside. If you don't mind spending the 18 bucks, buy the stock one. It will look more professional. I may switch it out later, I just wnated to see if I could make my own :)
Excellent, I'll give this a shot this weekend and report back results.
okay, i gave it a shot with no luck. I wired the switch as shown with the correct resistor values, and went to run a wire to the ecm. THat's where i hit a snag...
I thought there would be an existing wire for me to tap to. instead, i have one of those little harness plugs in the hole where pin 40 would be. how did you guys install the wire? I'm itching to do this!
I thought there would be an existing wire for me to tap to. instead, i have one of those little harness plugs in the hole where pin 40 would be. how did you guys install the wire? I'm itching to do this!
Check out this other thread, starting at page 16 to see how nickjhort did it:Originally Posted by PatrickJohnson ↑okay, i gave it a shot with no luck. I wired the switch as shown with the correct resistor values, and went to run a wire to the ecm. THat's where i hit a snag...
I thought there would be an existing wire for me to tap to. instead, i have one of those little harness plugs in the hole where pin 40 would be. how did you guys install the wire? I'm itching to do this!
Can we do this? (aka The DIY Cruise Control Thread)
AAAARRRRGGGHHH!
So, i finally got a few strands of the "red" wire pulled through the ecm connector on pin 40, so i know there is a connection. the black side is grounded directly to the black battery cable.
my switches are wired exactly like described (2 switch method).
i'm going to check my resistor values, maybe i used 620K instead of 620 ohm.
So, i finally got a few strands of the "red" wire pulled through the ecm connector on pin 40, so i know there is a connection. the black side is grounded directly to the black battery cable.
my switches are wired exactly like described (2 switch method).
i'm going to check my resistor values, maybe i used 620K instead of 620 ohm.
SUCCESS!!!!
Turns out I had grabbed the wrong resistors. Once i corrected it, I road tested and it worked like a charm. I've drilled holes and mounted the switches, but I'll have to wait until this weekend to run a permanent wire from the ecm.
So, I can confirm 100% that it works on a base model auto trans 2008 LB.
Turns out I had grabbed the wrong resistors. Once i corrected it, I road tested and it worked like a charm. I've drilled holes and mounted the switches, but I'll have to wait until this weekend to run a permanent wire from the ecm.
So, I can confirm 100% that it works on a base model auto trans 2008 LB.
Originally Posted by PatrickJohnson ↑SUCCESS!!!!
Turns out I had grabbed the wrong resistors. Once i corrected it, I road tested and it worked like a charm. I've drilled holes and mounted the switches, but I'll have to wait until this weekend to run a permanent wire from the ecm.
So, I can confirm 100% that it works on a base model auto trans 2008 LB.
Great!
We should try to figure out a terminal that will fit the pin on the ECU, so that a more proper connection can be made. The next time I place a Digikey order, I am going to order a bunch of different sizes of Molex connector pins and try to find one that fits well.
also, you can make a pretty secure connection by doing it the way nickjhort pushed it through the connector, only instead of just fraying the wires a bit, you can push it through enough to wrap the wire up into the large slot in the middle of the connector. This will secure it in place and make sure it doesn't pull out.
some pics of my install. it's all permanent and looking good!
New wire added:

Came through the firewall at the rubber hose on the passenger floor board

wiring at the switch point

Convenient grounding bolt under passenger kick panel


Finished!

New wire added:

Came through the firewall at the rubber hose on the passenger floor board

wiring at the switch point

Convenient grounding bolt under passenger kick panel


Finished!

Nice, looking good 👍
On my computer when you look at the instructions at the beginning of this post, theres a problem. Instead of a picture of the 4 and 2 switch hookup, there are red X's. Can someone post a drawing of the two ways to wire the switches up? Thanks!