Yarisworld Archive

DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag

293 posts · 385,443 views · page 4 of 6

Replies continued

TylerJAnn Arbor, MI · Jul 20, 2009#151
I have been looking for a cruise control solution for a while, I am glad I found this thread

I have a 2007 Yaris 3dr Liftback with 5 spd MT, if I can't see the lit icons that you showed in the first few pictures does that mean I can't perform this DIY?
Sir A.Y. AtoyotSurrey, BC Canada · Jul 20, 2009#152
Originally Posted by TylerJ ↑
I have been looking for a cruise control solution for a while, I am glad I found this thread

I have a 2007 Yaris 3dr Liftback with 5 spd MT, if I can't see the lit icons that you showed in the first few pictures does that mean I can't perform this DIY?
It just means no indicator lights - the actual cruise will work fine, if properly connected.
CTScottThread starterUSA, CT · Jul 21, 2009#153
Originally Posted by TylerJ ↑
I have been looking for a cruise control solution for a while, I am glad I found this thread

I have a 2007 Yaris 3dr Liftback with 5 spd MT, if I can't see the lit icons that you showed in the first few pictures does that mean I can't perform this DIY?
You can do it on a USDM 07 for sure. You will need to run a wire from the switches directly to the ECM's pin 40 on an 07 or 08. Also, with a MT you will need to add the clutch switch and wire it to the connector in the under hood fuse panel. Check out the tail end of this thread for more details:

Can we do this? (aka The DIY Cruise Control Thread)
tforknergeorgia · Jul 21, 2009#154
Here's how I did my clutch switch. I used a SPDT submini roller lever switch, Radio Shack # 275-0017. I superglued it in place on the metal bracket.
switch pic.JPG
TylerJAnn Arbor, MI · Jul 22, 2009#155
Thanks for those of you who responded to my question. I am thinking about doing this mod this weekend. I will update on how it turns out.👍
bronsinnj · Jul 22, 2009#156
Does anyone know the Toyota Part Number for the dash panel next to the ignition switch? (the one I put the switches in for the CC) Im thinking it would be handy to have in case the car needs warranty work!
CTScottThread starterUSA, CT · Jul 22, 2009#157
Originally Posted by bronsin ↑
Does anyone know the Toyota Part Number for the dash panel next to the ignition switch? (the one I put the switches in for the CC) Im thinking it would be handy to have in case the car needs warranty work!
55446-52060-B0
bronsinnj · Jul 22, 2009#158
Thanks much appreciated!
bronsinnj · Jul 23, 2009#159
55446-52060-BO is $22 BTW.
TylerJAnn Arbor, MI · Jul 25, 2009#160
Originally Posted by CTScott ↑
You can do it on a USDM 07 for sure. You will need to run a wire from the switches directly to the ECM's pin 40 on an 07 or 08. Also, with a MT you will need to add the clutch switch and wire it to the connector in the under hood fuse panel. Check out the tail end of this thread for more details:

Can we do this? (aka The DIY Cruise Control Thread)
I have two SPST N.O. momentary switches from radio shack and a pack of resistors I was just wondering what combination to use ... I have seen some people use 630 and others 660, I can do either with the supplies I have but was not sure about which is better CTScott mentioned I will have to hardwire the clutch switch into my under hood fuse box ... is this because we dont have the connector near the clutch pedal to just plug it in?
CTScottThread starterUSA, CT · Jul 25, 2009#161
Originally Posted by TylerJ ↑
I have two SPST N.O. momentary switches from radio shack and a pack of resistors I was just wondering what combination to use ... I have seen some people use 630 and others 660, I can do either with the supplies I have but was not sure about which is better CTScott mentioned I will have to hardwire the clutch switch into my under hood fuse box ... is this because we dont have the connector near the clutch pedal to just plug it in?
216 to 264 ohms for one between resume and on/off
351 to 426 ohms for the one between set and resume
819 to 1001 ohms for the one between set and cancel

For the two switch method, the range for the resistor for the Set switch is from 567 Ohms to 690 Ohms. Any value in that range is fine. I would just stay at least 10 Ohms from either end point.

For the clutch switch, that is correct that the 07 and 08's don't have the clutch cruise switch connector, so you do have to hardwire to connector in the under hood fuse panel.
TylerJAnn Arbor, MI · Jul 25, 2009#162
is there one spot in the firewall where i can thread through the ECM wire from the switches and the two wires from the cluth cruise switch ? being that they are on opposite sides
CTScottThread starterUSA, CT · Jul 25, 2009#163
Originally Posted by TylerJ ↑
is there one spot in the firewall where i can thread through the ECM wire from the switches and the two wires from the cluth cruise switch ? being that they are on opposite sides
There's a grommet on either side that you run the wires through. The one on the ECM side is a little easier to get to on the under hood side. The other one comes out behind the battery.
TylerJAnn Arbor, MI · Jul 25, 2009#164
Originally Posted by CTScott ↑
There's a grommet on either side that you run the wires through. The one on the ECM side is a little easier to get to on the under hood side. The other one comes out behind the battery.
What is the best way to access that grommet ? remove the glove box or is there a better way ?
PatrickJohnsonMurfreesboro, TN · Jul 25, 2009#165
no, it isnt' anywhere behind the glove box. in your passenger side floor, find the top edge of the carpet and pull it back (it' only attached by a couple pieces of velcro) and it exposes the grommet pretty clearly.
TylerJAnn Arbor, MI · Jul 25, 2009#166
ok so I pulled back the carpet and the grommet I see is attached to some hose that leads to the climate controls ... is this the one ?
CTScottThread starterUSA, CT · Jul 25, 2009#167
Originally Posted by TylerJ ↑
ok so I pulled back the carpet and the grommet I see is attached to some hose that leads to the climate controls ... is this the one ?
No, that one is for the AC condensate drain. I am not sure which on Patrick is referring to, but the one I was thinking of is the one which comes out just above the top left corner of the ECM (as you are facing it from under the hood). It comes into the cabin fairly high up behind the dash.
tforknergeorgia · Jul 26, 2009#168
I used the a/c hose grommet for my wires. It's easy to remove and replace from the inside. I wrapped my three thin wires (5 speed here) with several turns of black electrical tape to protect them from the sheet metal and then replaced the hose and grommet around them. I just carefully removed the grommet and hose and ran the wires through the hole. I then replaced the hose and grommet in the hole. The grommet is nice and resilient and seems to fit around the wires well. I mounted the switches and resistors in an old cassette box and tucked it into the cubby hole beside the driver's right knee. See my previous post on how I mounted a clutch switch. The switch action is very light so the clutch pedal motion isn't going to break it loose, but I'm sure a good grab with pliers would be all it would take to remove the switch. I figure it will take me all of ten minutes to remove the whole system if I have to go for warranty work. The only downsides I see to this are maybe longer wires and perhaps having to crawl under the car. Now that I've done this mod, I think I could complete another installation in less than an hour. This has got to be the coolest modification (at 48 years old and about 18 cars under my belt) I've ever done-

Many thanks to those here who allowed me to do this!
TylerJAnn Arbor, MI · Jul 26, 2009#169
Originally Posted by CTScott ↑
No, that one is for the AC condensate drain. I am not sure which on Patrick is referring to, but the one I was thinking of is the one which comes out just above the top left corner of the ECM (as you are facing it from under the hood). It comes into the cabin fairly high up behind the dash.
So if I crawl up under the passenger side dash will I be able to see it or should i remove it from the engine bay and let the light shine through to find it ?
TylerJAnn Arbor, MI · Jul 26, 2009#170
Originally Posted by CTScott ↑
No, that one is for the AC condensate drain. I am not sure which on Patrick is referring to, but the one I was thinking of is the one which comes out just above the top left corner of the ECM (as you are facing it from under the hood). It comes into the cabin fairly high up behind the dash.
Ok now that I have the wires run into the engine bay what is the best way to make secure attachments to the ECM and the fuse box for the cruise switch, using certain connectors or splicing ?
PatrickJohnsonMurfreesboro, TN · Jul 26, 2009#171
the most solid (and convenient in my opinion) place to ground would be under the passenger kick panel, there is a ground bolt there where other things are grounded, you can't miss it. as for the ecm wire, the best way i think is to strip about 1/4 inch of the wire, push it through the connector, and bend the excess back into the slot in the middle of the connector. if you look at the pics earlier in this thread you will probably get what i'm saying.
TylerJAnn Arbor, MI · Jul 26, 2009#172
So I had everything soft wired in last night and it worked perfectly. When I ran all the wires today and tried it after buttoning things up nothing happened. I think my jumper for the clutch cruise switch in the fuse box got moved when I snapped the lid back on. This is the coolest thing to have cruise for so cheap.
WDmacIN · Jul 31, 2009#173
Hello, I just bought a 2009 yaris sedan and wanted to put the $10 cruise on it. When I got into the bottom of the steering wheel colum, there is only 1 black wire coming out of the connector shown in CTSCOTT's diagram. Any ideas? Thanks.
CTScottThread starterUSA, CT · Jul 31, 2009#174
Originally Posted by WDmac ↑
Hello, I just bought a 2009 yaris sedan and wanted to put the $10 cruise on it. When I got into the bottom of the steering wheel colum, there is only 1 black wire coming out of the connector shown in CTSCOTT's diagram. Any ideas? Thanks.
I believe that someone else found that as well. That means that the 09 Sedans are like the 07-08 liftbacks, which means that you will need to run the wire yourself from the ECM to the switches. Take a look at this thread, working your way from the end back for more details:

Can we do this? (aka The DIY Cruise Control Thread)
AlexNet0Rockland, ME · Jul 31, 2009#175
I havent seen anything yet I dont think, how do you remove the friggin dash, lol, I dont wanna break any clips, so can anyone post a pic with the screw and clip locations highlighted?
WDmacIN · Jul 31, 2009#176
Thanks a lot I appreciate the time you took to post all this info. Looks like you have helped a bunch of people save some money. I'll check out that thread and let you know how it goes. Thanks again
CTScottThread starterUSA, CT · Aug 22, 2009#177
Originally Posted by G6-R ↑
I bought a brandnew Yaris 1800 T-Sport 3 doors ( delivery date in about 2 months from now )
I have a original cruisecontrole handel from a Corolla Verso 1800 can i use it for the Yaris Cruisecontrole ?
No. For whatever reason, the European Yaris doesn't have cruise programmed into the ECM.
julienrlottawa · Aug 29, 2009#178
Hello, I wanted to do this but could not find the parts (even with the part numbers) for the covers\panels on the dash (so I can swap it for the normal one if I take the car in for servicing or something or want to sell the car as a trade in in the future), so I made the mirror cover one myself! It happens to be a hobby of mine to make plastic objects \ casting and molding, so if anyone needs a mirror cover, the master mold is made, and since that was the expensive part, i can make them for pretty cheap if anyone wants one for 10$ shipping anywhere included :). Takes about 24 to have one made and ready so it could be sent pretty quickly.
takaVaughan, Ontario · Sep 2, 2009#179
Thank Scott for this DIY.
System is installed and working. Couple things I found on my 2008 Sedan: The wire is already installed between ECM pin 40 to connector AD4 under the dash. Instead of running a new wire from ECM or disassemble the dash to get to the wire from the top of AD4, I push a long pin up from the bottom of connector AD4 (pin 9) for wire connection to the switches.
My two spring loaded off toggle switches are mounted onto a existing blanking hole located beside the park brake handle. Toggle switches operation are: System enable/disable on each toggle and Set/Coast (when held). Sorry I would have posted photo of the installation if and when I find out how to.
127.0.0.1NE · Oct 6, 2009#180
I just did post 1 to my 2010 yaris and it works perfectly. I made my own switchbox and will mount near the handbrake.



edit: I just found my new permanent switch. I will get this in the mail, then
cut off the control box I have now, and mount this in the empty switch slot
next to my stereo AUX input.


super sano install for the Yaris. keyboard sized 2-axis momentary joystick

http://www.alliedelec.com/search/pro...px?SKU=9485541
948-5541.jpg
ditsoAlabama · Oct 16, 2009#181
I really enjoyed CTScott's instructions on how to add cruise control. I haven't purchased a Yaris yet but I'm planning to do so this spring. Since CTScott obviously is a very smart individual, I was wondering whether he could provide instructions on how to add a headphone jack in approximately the same location as the two cruise control switches. The jack would not necessarily need to shut off the speakers in the car--just tap into the sound system. Before someone goes ballistic on how "unsafe" this is, I would like to point out that my drive is very early in the morning on an interstate with very little traffic. I would take the headphones off when driving in serious traffic. Thanks.
127.0.0.1NE · Oct 19, 2009#182
2010 Yaris 5door Auto, DIY cruisecontrol switch installed. pardon the red sharpie treatment, it needs another coat.

it's teh bomb. the switch action feels like toyota engineered this thing, it really does. easy to hang yer arm off the
armrest and + or - ...and it is precise.
IMG_2347.jpg
CTScottThread starterUSA, CT · Oct 19, 2009#183
Originally Posted by 127.0.0.1 ↑
2010 Yaris 5door Auto, DIY cruisecontrol switch installed. pardon the red sharpie treatment, it needs another coat.

it's teh bomb. the switch action feels like toyota engineered this thing, it really does. easy to hang yer arm off the
armrest and + or - ...and it is precise.

Very cool!
POORSHANE CT · Oct 19, 2009#184
good stuff!
AntipilorGreen Bay, WI · Oct 22, 2009#185
So I think I might have screwed up somewhere, I just notice in the last day or so after I installed this mod (stills not working but I havn't had time to track down the problem). I noticed that the airbag off light on the passenger side will light up only for a bit randomly while driving. The airbag on light works fine when someone is riding with me. Any ideas on what I did wrong?
CTScottThread starterUSA, CT · Oct 22, 2009#186
Originally Posted by Antipilor ↑
So I think I might have screwed up somewhere, I just notice in the last day or so after I installed this mod (stills not working but I havn't had time to track down the problem). I noticed that the airbag off light on the passenger side will light up only for a bit randomly while driving. The airbag on light works fine when someone is riding with me. Any ideas on what I did wrong?
The two are probably unrelated. The airbag light occasionally flickering may be due to the empty seat weight calibration being off.

For the cruise issue, start with your connection at the ECM. Make sure you are in the correct pin there. If you just want to verify that the cruise and airbag issues are unrelated, disconnect the cruise wire to the ECM.

Posting pictures of your connection to the ECM and you resistor setup/wiring to it will help as well.
SEALLChina · Oct 25, 2009#187
hi guys,I'm from China with 08'Yaris 1.6AT 5doors liftback,i have done the CC work just like Vince87'job,but the CC don't work,is it haven't programs in my ECM/ECU? somebody help me~~~~
CTScottThread starterUSA, CT · Oct 26, 2009#188
Originally Posted by SEALL ↑
hi guys,I'm from China with 08'Yaris 1.6AT 5doors liftback,i have done the CC work just like Vince87'job,but the CC don't work,is it haven't programs in my ECM/ECU? somebody help me~~~~
Can you track down the electrical wiring diagrams for the Chinese market Yaris? Someone from Europe tried the CC mod and it didn't work. Once I got a copy of the EWD for their market, I found that the CC pin on the ECM wasn't actually used for their market.
SEALLChina · Oct 27, 2009#189
OK,thanks for all,and do you know how much volts on pin 40?
CTScottThread starterUSA, CT · Oct 27, 2009#190
Originally Posted by SEALL ↑
OK,thanks for all,and do you know how much volts on pin 40?
Pin 40 measures 12 volts with nothing connected to it.
SEALLChina · Oct 27, 2009#191
thanks! i will check it out,one more question:the Resistors should be 240 ohms/390 ohms/910 ohms and 1/8W or 1/4W? or whether it should be with limits?
CTScottThread starterUSA, CT · Oct 28, 2009#192
Originally Posted by SEALL ↑
thanks! i will check it out,one more question:the Resistors should be 240 ohms/390 ohms/910 ohms and 1/8W or 1/4W? or whether it should be with limits?
Correct for the values. Either 1/8W or 1/4W is fine.
SEALLChina · Oct 28, 2009#193
Thanks for all,i checked the PIN 40 on the ECM yesterday,but it was no volts on it,so i can confirm that the CC pin on the ECM wasn't actually used for Chinese market.
thank you for all the help.
CTScottThread starterUSA, CT · Oct 28, 2009#194
Originally Posted by SEALL ↑
Thanks for all,i checked the PIN 40 on the ECM yesterday,but it was no volts on it,so i can confirm that the CC pin on the ECM wasn't actually used for Chinese market.
thank you for all the help.
Maybe you should buy a USDM ECM off ebay. Then, you'll have the only Yaris in China with cruise control.
sabya78UAE · Oct 31, 2009#195
I installed the CC, when I switch it on the speedometer jumps once , pressing the set buttom dosen't set the speed . While installing , by mistake I connected the 12 V supply instead of the ground which stalled the engine immediately . Can anyone help me if I have screwed up the CC function of my ECU. The car is running fine otherwise.
CTScottThread starterUSA, CT · Oct 31, 2009#196
Originally Posted by sabya78 ↑
I installed the CC, when I switch it on the speedometer jumps once , pressing the set buttom dosen't set the speed . While installing , by mistake I connected the 12 V supply instead of the ground which stalled the engine immediately . Can anyone help me if I have screwed up the CC function of my ECU. The car is running fine otherwise.
So far it looks like only US and Canada Yaris have the cruise functionality built into the ECM. In the UAE do you get European Yaris? If so, cruise is definitely not built in.
sabya78UAE · Nov 1, 2009#197
Dear Scott,

Thanks for the update .. I dont think the Yaris in the UAE is European.. I checked up the VIN and it states my car is made in Japan and is ment for the GCC market. I was really looking forward to install the CC ,, is there any other way to do it or any how can I check if the ECU is having the CC function?
CTScottThread starterUSA, CT · Nov 1, 2009#198
Originally Posted by sabya78 ↑
Dear Scott,

Thanks for the update .. I dont think the Yaris in the UAE is European.. I checked up the VIN and it states my car is made in Japan and is ment for the GCC market. I was really looking forward to install the CC ,, is there any other way to do it or any how can I check if the ECU is having the CC function?

First, make sure that you are really in pin 40 of the ECM.

Second, what is the part number on the label of your ECM?
SEALLChina · Nov 3, 2009#199
Originally Posted by CTScott ↑
Maybe you should buy a USDM ECM off ebay. Then, you'll have the only Yaris in China with cruise control.
hahahaha~~~good idea!but how much the USDM ECM? and I need to change the ECU or ECM's Program? or install it directly into the in-situ and do not change anything?
CTScottThread starterUSA, CT · Nov 3, 2009#200
Originally Posted by SEALL ↑
hahahaha~~~good idea!but how much the USDM ECM? and I need to change the ECU or ECM's Program? or install it directly into the in-situ and do not change anything?
I'm not sure about the compatibility, but USDM ECMs can often be purchased for under $100 off ebay. The engine type, transmission type, ABS yes/no, and VSC yes/no are important to match when swapping ECMs. Our USDM ECMs are for 1NZFE and 2NZFE engines. I haven't noticed which engine you get over there.