Yarisworld Archive

The custom/aftermarket exhaust thread! [Pics + Videos]

225 posts · 840,944 views · page 4 of 5

Replies continued

ilikericesavannah, ga · Oct 27, 2011#151
AAHAA! thats better 🎉
yariSB86OH · Mar 10, 2012#152
what are the pros/cons of riding around with no muffler? just for kicks until i decide on which exhaust setup to purchase.
cali yarisCanoga Park, CA · Mar 10, 2012#153
^ sound, mostly. A couple of members have made axle-back straight pipes from the flange out to get some aggressive sound. I really don't think it will hurt your car.
yariSB86OH · Mar 10, 2012#154
cool. it is very loud. thanks man.
malibuguyWestminster, MD · Mar 11, 2012#155
A muffler delete sounds pretty cool with the stock midpipe. I ran around like that for about a month. Then i swappped my full exhaust back on...more power with less noise!
tooterLos Angeles · Jun 7, 2012#156
Originally Posted by malibuguy ↑
well considering the stock exhaust is well matched in size & is mandrel-bent 409ss tubing...anything a typical muffler shop is going to do to it & put crap on it. aluminized steel components that will rot out, cheesy hangers that aren't matched to the factory isolator...or better still, welded on truck style hangers to the chassis that will rot that out too. then its crush-bent so it doesn't do anything for you in terms of laminar flow
There is an alternative to the muffler shop, although I've seen some really nice work done at some...

Picture not included in this copy

...Garm's MI exhaust has mandrel bent tubing and oem matching hangers which perfectly align with the stock isolators. 👍
4/20 NEVER FORGETPortland, OR · Aug 25, 2012#158
Copy-paste of my reply in the OBX exhaust thread:


Originally Posted by 4/20 NEVER FORGET ↑
I got the exhaust installed today. Like I said previously I had the factory and OBX exhausts cut to meet just after the factory resonator.

I took a picture of the inside of the resonator so you all could see that is straight-through in design. I was going to have it changed out if it wasn't, but looking at it there didn't seem a reason to have it replaced.

Some work was required to make the muffler fit into the space available under the car, we had to take a sledge hammer and hammer the spare tire well in a bit as well as bend the toe-hook out a half-inch so that the muffler could be fitted nice and tight under the car. With the factory hangers it wanted to hang pretty low, we used the OBX back mount that holds onto the pipe next to the muffler and the exhaust shop welded a hanger to the top of the muffler, just out of sight.

The muffler is quite loud compared to the Megan axle-back I had before. I'm going to give it a week before I make a final decision but I might have it cut off and changed out with a Magnaflow or some other exhaust. I do really like the way the muffler looks though, the tips look nice tucked up right under the bumper.

Here's a video, I should have revved the car up a bit more but it's what I have for now. I'll take another one and post it when I get a chance.

http://www.youtube.com/watch?v=niZYgO0vvrU&feature=plcp

And to respond to TPA5, while loud, there is no buzz or rasp that you sometimes get. I've had a lot of Honda cars so I know what you mean about buzzy or raspy. If this car was a bit faster I could justify the sound it makes, but for now I would like it a bit quieter.
4/20 NEVER FORGETPortland, OR · Aug 25, 2012#159
oops, forgot it did not attach images

5 attachments not included in this copy

odg495Brisbane, Australia · Nov 30, 2012#161
Just came back from the exhaust shop after fitting some new tailpipes to my Yaris. I kept the original muffler and had them fabricate a split pipe from there, with a twin 2" tip fitted to each side. Its something I've wanted to do ever since I bought the car, and now I'm happy with the result. Its more subtle than some of the others on this site, but being middle aged now it suits me just fine.

2 attachments not included in this copy

tooterLos Angeles · Dec 1, 2012#162
Nice...🙂

Looks like a BMW M5 exhaust. 👍
odg495Brisbane, Australia · Dec 1, 2012#163
Originally Posted by tooter ↑
Nice...🙂

Looks like a BMW M5 exhaust. 👍
I was thinking more M3, but hey, I'm not going to argue! 😆
larryn2oMS · Dec 3, 2012#164
this one is a 2 inch pipe with a 2 inchcherry bomb turbo muffler, passes for a stock muffler. low tone unloaded . a good bit louder under load.


cost $24 at autozone and $44.00 to get the pipe bent and welded.

I know it's not stainless or Unobtainium , but I've already started my next axle back , will post it in a few days.

http://www.youtube.com/watch?v=fPtaWvaIkU0&list=UL
DeathBeardLos Angeles, CA · Feb 27, 2013#165
Anyone using the Apexi Bomber exhaust??
tooterLos Angeles · Mar 22, 2013#167
Sounds like beautiful music... 🙂
yariSB86OH · Mar 22, 2013#168
Thanks man. 😁

I'm waiting on a couple prospects for my mid pipe replacement. should sound even most beastly when its all done.
Turbotorocalgary · May 31, 2013#169
Hey guys, figured I'd post here because I'm having a super hard time finding an axle back for my 05 echo (in Canada) anyone want to point in the right direction or sell me their exhaust? Lol thanks any info would be appreciated
mrtobs1988United States · Sep 1, 2013#170
Originally Posted by mrbond ↑
Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D
Hey is that the only midpipe you can find. And why is it so expensive? Is there anything cheaper that you know of?
brutal910alvin texas · Sep 8, 2013#171
Hey fellas, I could use some help here.I have a 2007 yaris hatchback. 1.5 liter 5 speed. DC header, greedy full exhaust , no cat. And some little gadget box with wire that is suppose to trick ecu that it does have a cat engine light on. Code his for 0/2 sensor upstream. If I install a new 0/2 sensor my engine light should turn off right? I only have 15 days to fix this problem. And I'm on my eighth day.otherwise I will have to pay for another inspection. Please help. I didn't see another 0/2 sensor under there unless I missed it. Mechanic suggested I change both. 318.00 bucks for parts. :-(
Vitz_Q8VIC - Australia · Apr 30, 2014#172
This is my very first post and hopefully not the last. I've been visiting yarisworld for a while occasionally until I finally bought my Yaris couple of months ago. I've been always a big V8 sedan guy but when I rented a Yaris in a road trip last I fell in love with it instantly, I don't know how to explain my feeling but wow, Huge difference from my Crown Vic and Aus Ford Falcon.

Anyway let's get to the topic 🙂. After a very long wait I finally got Tanabe Concept G Exhaust for my Yaris. Thanks to redyaris's post I managed to install it by myself. It was a relatively easy task but took me about 6 hours 😁because the right wheel and one of the mufflers's spring bolts were stuck even with WD-40 and some hammering.

here are the pictures:
Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy


I really love it. At first I thought it's a little bit loud and annoying especially on long drives. there was a moment when I regretted installing it and thought about reinstalling the OEM exhaust but now I Think I got used to it by now and I absolutely love it. I will upload a video as soon as it's uploaded on Youtube
http://youtu.be/6OUqDz-pF2c
j-sanMN · May 21, 2014#174
A question for you exhaust gurus:

A search of the forum turns up conflicting reports of a freer-flowing aftermarket exhaust system improving/hurting MPG. Some said it improves MPG and power, others have said it hurts MPG, but improves power. Either way, it seems a better exhaust will improve power and possibly affect MPG.

I drive with a fairly light foot and mostly on the highway and average 43MPG most days. My Yaris is stock, but I am open to doing an aftermarket exhaust, provided it doesn't sound like bad rice and seriously hurt MPG. I wouldn't mind the few extra HP for a little help in the passing lane. If I go aftermarket, I plan to leave the intake stock and drop in a K&N filter. Maybe a header is fine, but I plan to leave the cats and resonator intact and possibly add an additional resonator after the stock one. There is a local custom exhaust shop that can do the work and I would ask them to follow the stock piping, but go up to a 2" pipe vs the stock 1.75" pipe (I understand the cats and resonator use a 2" pipe) and route it to the factory flange at the rear axle. From there, I'll probably bolt on a Tanabe Medalion or Nitto (plan to buy from Micro Image) as those two seem to be the quietest mufflers. How does that sound for an exhaust set-up?

I am not expecting oh-my-god gains in HP or anything, but hope to have a little of both worlds: improved HP while being able to retain (or improve) MPG.
monchito18Puerto Rico, Isabela · May 22, 2014#175
Originally Posted by YarisPR ↑
Current setup
Custom long tube header
2.5" exhaust w/ cut-out
Picture not included in this copy
que porqueria Angelo jajajajajajaja
🤣
malibuguyWestminster, MD · May 22, 2014#176
Originally Posted by j-san ↑
A question for you exhaust gurus:

A search of the forum turns up conflicting reports of a freer-flowing aftermarket exhaust system improving/hurting MPG. Some said it improves MPG and power, others have said it hurts MPG, but improves power. Either way, it seems a better exhaust will improve power and possibly affect MPG.

I drive with a fairly light foot and mostly on the highway and average 43MPG most days. My Yaris is stock, but I am open to doing an aftermarket exhaust, provided it doesn't sound like bad rice and seriously hurt MPG. I wouldn't mind the few extra HP for a little help in the passing lane. If I go aftermarket, I plan to leave the intake stock and drop in a K&N filter. Maybe a header is fine, but I plan to leave the cats and resonator intact and possibly add an additional resonator after the stock one. There is a local custom exhaust shop that can do the work and I would ask them to follow the stock piping, but go up to a 2" pipe vs the stock 1.75" pipe (I understand the cats and resonator use a 2" pipe) and route it to the factory flange at the rear axle. From there, I'll probably bolt on a Tanabe Medalion or Nitto (plan to buy from Micro Image) as those two seem to be the quietest mufflers. How does that sound for an exhaust set-up?

I am not expecting oh-my-god gains in HP or anything, but hope to have a little of both worlds: improved HP while being able to retain (or improve) MPG.
To be honest. Keep the stock exhaust for mpg. I usually have run about 3mpg less with my exhausts. Most of the fact that I love to listen to my exhaust. Plus the stock exhaust is better matched for low rpm performance.

A typical muffler shop will only crush-bend tubing. So their 2" tubing is typically smaller in the bends then your stock midpipe. So the only thing your getting is no improvement in exhaust flow and lower quality tubing that will rust out eventually.

I suggest a rear section exhaust for some power and sound and not throwing away all your mpg.

These motors really love a full exhaust so real gains in power can be realized
j-sanMN · May 23, 2014#177
Originally Posted by malibuguy ↑
To be honest. Keep the stock exhaust for mpg. I usually have run about 3mpg less with my exhausts. Most of the fact that I love to listen to my exhaust. Plus the stock exhaust is better matched for low rpm performance.

A typical muffler shop will only crush-bend tubing. So their 2" tubing is typically smaller in the bends then your stock midpipe. So the only thing your getting is no improvement in exhaust flow and lower quality tubing that will rust out eventually.

I suggest a rear section exhaust for some power and sound and not throwing away all your mpg.

These motors really love a full exhaust so real gains in power can be realized
Thanks much for the advice. I may just look into getting a axle-back system like the Tanabe Medalion and leave the rest stock. Maybe have the shop weld in another resonator if I find the aftermarket muffler too noisy.
dekraberdSilver Spring, MD. · Jul 9, 2014#178
🤷

1 attachment not included in this copy

salmanghiyasPakistan · Jul 13, 2014#179
what is the basic function of these cats ?
please suggest what option from below should i go, for the maximum HP gains .. regardless of fuel economy ..

1: remove both cats and resonator and put a straight down pipe of 2" or 2.25" ( please suggest which is better 2" or 2.25" ) till the end ...

2: keep the 1st cat and remove the second cat and the resonator and put a straight down pipe till the end ...


3: keep both cats and just remove the resonator and put a straight down pipe till the end ...

4: keep both cats and resonator just put a straight down pipe after the resonator till the end ...

5: remove both cats just keep the resonator and put a straight down pipe till the end ...
mario98cPuerto Rico · Jul 13, 2014#180
Remove both cats with 2" exhaust and magnaflow freeflow muffler
salmanghiyasPakistan · Jul 13, 2014#181
Originally Posted by mario98c ↑
Remove both cats with 2" exhaust and magnaflow freeflow muffler
u mean from the header neck .. i put a 2" pipe then in the middle put a resonator .. and at the end use the magnaflow muffler ?
mario98cPuerto Rico · Jul 13, 2014#182
Originally Posted by salmanghiyas ↑
u mean from the header neck .. i put a 2" pipe then in the middle put a resonator .. and at the end use the magnaflow muffler ?
That's correct.
salmanghiyasPakistan · Jul 13, 2014#183
Originally Posted by mario98c ↑
That's correct.
Awrite :)

and what roughly expected HP gains i would get ...
mario98cPuerto Rico · Jul 13, 2014#184
I can't tell you exact dyno numbers because I never visited a dyno after installing the exhaust but you will definitely feel the difference in acceleration. You will not regret doing it.
salmanghiyasPakistan · Jul 13, 2014#185
Originally Posted by mario98c ↑
I can't tell you exact dyno numbers because I never visited a dyno after installing the exhaust but you will definitely feel the difference in acceleration. You will not regret doing it.
ohkhay ...

if i use 2 resonators in the middle .. just for lowering exhaust sound .. would it effect the performance ?
mario98cPuerto Rico · Jul 13, 2014#186
Originally Posted by salmanghiyas ↑
ohkhay ...

if i use 2 resonators in the middle .. just for lowering exhaust sound .. would it effect the performance ?
I don't think so but with one resonator the car is quiet enough that it won't bother you cruising at normal speed.
mario98cPuerto Rico · Jul 13, 2014#187
Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk
salmanghiyasPakistan · Jul 13, 2014#188
Originally Posted by mario98c ↑
Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk
Very nice 🙂
salmanghiyasPakistan · Jul 17, 2014#189
Originally Posted by mario98c ↑
Here is a video of my car with 2" exhaust, magnaflow imitation muffler(the original magnaflow should sound better) and a magnaflow 2" glasspack as a resonator. With the OEM Toyota resonator I think the car should sound better.
https://www.youtube.com/watch?v=d_tajogfKAk
if i'm not mistaken ... the point you are making here is ...

the original OEM resonator in the catback which basically is the third one in line ... has 2" in and 2" out pipe width ?
salmanghiyasPakistan · Jul 18, 2014#190
Yellowww ...
salmanghiyasPakistan · Jul 20, 2014#191
im getting too confused now .. :S

some say go with max 2" pipes some say nah its ok even if u take 2.5" pipes .. some say keep the 1st cat .. same say remove both cats and have only one resonator in between ... :S

im surfing over the forums and internet from the last few days now ... but honestly speaking the more and more im reading stuff the more im getting confused ... :S

i did experimented one thing ... i put a 1.7" pipe ( 1.7" measurement from inside ) from the neck of the headers, removed both cats and resonator till the rear bumper and installed a topspeed muffler at the end ... the inlet of the muffler was 2.5"

3 attachments not included in this copy

malibuguyWestminster, MD · Aug 31, 2014#193
finally got around to getting mine back on the dyno with the current exhaust...no real difference over the old set up peak vs. peak...but after peak power was up like 7whp...

http://www.youtube.com/watch?v=yRBfjMLSNDU
clintairdrie alberta · Sep 28, 2014#194
Removed stock muffler and replaced with shown baffle and tip. I think it sounds pretty good!!

1 attachment not included in this copy

RakinBangladesh · Oct 25, 2014#195
Picture not included in this copy
Just did a full 2" custom Stainless Steel downpipe with flowmaster 40 series endbox. Removed the cats in the process too since we don't have any emissions testing here whatsoever. OEM resonator. Yes I also did the axle-back section too, forgot to take a photo.
It has a very deep tone, but I would like to quiet it down just a little on the low rev range (upto 3000 RPM?), should I put in another resonator or a high-flow cat to town it down? Any suggestions would be appreciated.
RakinBangladesh · Oct 25, 2014#196
Originally Posted by ryanww ↑
I have 1.5 Yaris m/t. I'm going to install unichip q+, but I'm waiting for the exhaust set up. I've done porting polish, open filter, megan header, lightweight crank pulley. The megan header outlet is 2". What's the best pipe size and exhaust set up? Is 2" mid pipe all the way until the muffler? Or should i put an oem resonator in the middle? I've tried 1.75" and i put the oem resonator in the middle, but the acceleration was not good. Then i put off the resonator, so it was 1.75" all the way to muffler. It was better than with the resonator. I thing it's because the porting polish maybe. Is there anyone has done some research about the pipe size with piggyback install? How much hp and torque was it?


Sent from my iPad using Tapatalk
I have the same engine as you do, I did a full 2" pipe all the way and acceleration was pretty good. Felt decent gains over stock system. I did also remove the cats and put a flowmaster in the process though.
powder puffDFW TX · Nov 20, 2014#197
The beginning of my custom exhaust. 2.25" × 12" glass pack and a 3" tailpipe. Next step is to go to exhaust shop and have them fab me up a bend with flange to go over the axle so I can weld it all up. I want it to be bolt on so if me or my wife don't like it I can easily swap back to factory
Picture not included in this copy
UPDATE: i have everything welded up and put on, will get pics and video next weekend. too dark and windy outside now. plus i still need to take it back off and paint it.
powder puffDFW TX · Nov 27, 2014#198
Got it all welded up and installed, still need to take it back off paint it flat black though. As soon as the video uploads I will post a link
Picture not included in this copyPicture not included in this copyPicture not included in this copy
Video link:
08 yaris glasspack: http://youtu.be/DQW0brSTNmY
tooterLos Angeles · Nov 28, 2014#199
Sounds really good for a scratchbuilt system. 👍

(Your welding looks better than mine... 😉 )


Greg
powder puffDFW TX · Nov 28, 2014#200
Thanks, I'm just a diy guy with no special training with a cheap Flux core welder, lol