Yarisworld Archive

The custom/aftermarket exhaust thread! [Pics + Videos]

225 posts · 840,944 views · page 5 of 5

Replies continued

AhoysandySydney, Australia · Apr 9, 2015#201
I've been rolling for about 2 months with no muffler and a custom axle back straight pipe. whilst you get people cracking necks to see what the hell the sound os coming from, it does get annoying in the cabin whilst travelling along the highway. hence i am soon getting a cat back system put back on, haha
IllusionXBrossard, QC · Apr 9, 2015#202
Are you going with Bosal/Walker? :)

I waiting to receive me HKS axle back...
MedMantleSouth Africa · Apr 27, 2015#203
Custom catback Powerflow exhaust.
Picture not included in this copy
Picture not included in this copy

Soon I'm gonna get a Cat put back in the line simply for Highway drone and smell

2 attachments not included in this copy

tooterLos Angeles · May 16, 2015#204
I like that sturdy support for the exhaust tip. 👍


Greg
ipwnrrichmondhill, ontario · Jun 4, 2015#205
Scratch build bolt on axleback using another resanator
Picture not included in this copy
Using the stock tip
Picture not included in this copy
Bird poop welds
Picture not included in this copy
This is how it looks from the back
Picture not included in this copy
coheedMaiden, NC · Jun 25, 2015#206
2" straight pipe/ muffler delete. It has more clearance to the bag than it appears to. Made with scraps around the shop with the $90 flux-core Harbor Freight welder.

Picture not included in this copy
Picture not included in this copy

In car video, audio isn't that great as my camera mount was vibrating and making noise.
https://youtu.be/W4PeHI7ZGmo

0-60/ revving
https://youtu.be/NnYbNGoURN8
TerenceCruzCali · Jun 25, 2015#207
Originally Posted by coheed ↑
2" straight pipe/ muffler delete. It has more clearance to the bag than it appears to. Made with scraps around the shop with the $90 flux-core Harbor Freight welder.

Picture not included in this copy
Picture not included in this copy

In car video, audio isn't that great as my camera mount was vibrating and making noise.
https://youtu.be/W4PeHI7ZGmo

0-60/ revving
https://youtu.be/NnYbNGoURN8
Dude.. That sounds great Cory!!👍
CanadianYarisOntario, Canada · Jul 31, 2015#208
Im looking for a custom full exhaust for a toyota yaris. I dont want any check engine light to come on. Can I remove one of the cats and the resonator, while installing an OBX Header and Axle Back Exhaust without problems?
CanadianYarisOntario, Canada · Aug 3, 2015#209
Someone has to know if a custom exhaust will throw CEL codes?!?! ^^
Bony_ahmedDhaka, Bangladesh · Oct 13, 2016#211
Im thinking of removing the muffler on my 2007 yaris sedan. The engine 1.3L 2nzfe.....is there any drawbacks of doing so. Thanks in advance
JerkrattFair Lawn, NJ · Oct 13, 2016#212
Originally Posted by CanadianYaris ↑
Someone has to know if a custom exhaust will throw CEL codes?!?! ^^
If you delete the cat and you just have resonators you're going to have to space out the secondary O2 sensor further away from the pipe to read differently than the one that's in the OBX header. If you go to a good person they should know what to do otherwise you could sort out a spark plug non fouler or I'm sure they sell 02 spacers on eBay
JessMessWaldorf Maryland · Nov 15, 2016#213
Picture not included in this copy

I did my own muffler delete and wanted to keep as much stock material as possible. This i what i ended up with..
JessMessWaldorf Maryland · Nov 25, 2016#215
Made my own muffler delete.. I wanted to keep as much stock material as possible. This is what i came up with..

Picture not included in this copy
paulelhardcoreknoxville · Jan 16, 2017#217
Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.
jackkb1998Ohio · Feb 8, 2017#218
Hi,

I have just done a muffler delete and don't plan on keeping it like this. Are there any pieces I can buy that will be a nice fit or is this something I have to build myself? I can weld pieces from the old muffler to a new exhaust, but am unsure if anyone has had any experience with this.
thebarberGrand Rapids, MI · Feb 9, 2017#219
Originally Posted by paulelhardcore ↑
Hi everyone, I am looking to get midpipe for my yaris sedan 2010. On the forum I only see about nitto midpipe or custom. But no clue where I can get nitto midpipe. If I need to go the route custom. Which catalytic hi flow and resonator hi flow should get. So far I got on the car dc sport header, catback dc sport and intake injen.
cat and resonator are 2" thru. just have someone fabricate your exhuast at 2" mandrel or 2.25" crush bent from the back end of the resonator to the back of the car.

thats what i did way back when (2.25" crush bent res-axle section with megan axleback muffler) and it was great. really picked up the middle and top end power
ern-dizCA all day · Jun 23, 2017#220
Looks really good, but isn't the muffler there too? Looks like more than just the tip.
kimonaHuntington Bch, CA · Jun 23, 2017#221
Originally Posted by ern-diz ↑
Looks really good, but isn't the muffler there too? Looks like more than just the tip.
Yup, looks like the complete super shiny muffler installed there... and the GReddy licence plate frame, too!

1 attachment not included in this copy

06YarisRSFredericton, New Brunswick, Canada · Nov 21, 2018#222
Here is my Megan axleback installed. The car has to go to an exhaust shop to get everything lined up - muffler needs to be rolled a few degrees clockwise . I also ordered 4 new Walker 35286 insulators/hangers as my old ones were pretty soft and stretched. The axleback is attached to an aftermarket Scion xD midpipe. Considering having the shop run 2.25" pipe from the resonator to the axleback.

Here is a video. Skip to 0:56 if you just want to hear the exhaust.

https://www.youtube.com/watch?v=5Edvs_TSGkY

Pic:

Picture not included in this copy
CompeerAuckland, NZ · Dec 29, 2023#224
I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.
Picture not included in this copy Picture not included in this copy

https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.
mitch9521Red Deer, AB · Dec 29, 2023#225
Originally Posted by Compeer ↑
I made my own headers over the last few weeks. Out side is ugly but the inside I have dremmeled and sanded the crap out of of and she sounds pretty good now.
Picture not included in this copy Picture not included in this copy

https://drive.google.com/file/d/1ePY...ew?usp=sharing

I also found a very unique modellisto rear axle back mid mount exhaust, has twin middle exhuast stainless exhaust and lip for it, will probably sell it tho I love my tannabe one. Will take some pics of the modelissto one for you all later.
Modellista Sold a center exhaust and rear bumper lip for the 3rd gen Vitz RS, fairly easy to find.

Picture not included in this copy