Yarisworld Archive

The custom/aftermarket exhaust thread! [Pics + Videos]

225 posts · 840,944 views · page 2 of 5

Replies continued

HavocMaryland · Feb 16, 2009#51
Originally Posted by lilredrocket ↑
^Very nice. Sound clip? Oh and welcome to the fourm!!
Thank you lilredrocket! Well the engine was cold and I just installed this Saturday, 2 days ago, so there's some smoke.

EDIT: Oh and there's an Injen CAI on the other end.

www.bwcorridor.com/images/yaris/P1000988.wmv
PETERPOOPOahu · Feb 16, 2009#52
Originally Posted by Havoc ↑
Thank you lilredrocket! Well the engine was cold and I just installed this Saturday, 2 days ago, so there's some smoke.

EDIT: Oh and there's an Injen CAI on the other end.

www.bwcorridor.com/images/yaris/P1000988.wmv
I always like videos. Seems strange for the tip being so short right off the muffler. Kinda sounds a little too "ricey" for me. But looks good overall!
mrbondIllinois · Mar 13, 2009#53
Originally Posted by frownonfun ↑
so uh... i thought i was following all this exhaust stuff but now after reading this thread i'm a little unsure. if i want to replace my exhaust from the header back what parts do i need exactly? and is that going to be really loud? would it be worth the trouble from a performance standpoint? would i be better off just replacing cat back?
Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D
frownonfunRGV, Texas · Mar 13, 2009#54
Originally Posted by mrbond ↑
Well, personally I think it's worth the money. You can't have an efficient engine if your intake and/or exhaust is too restrictive (which is what the Yaris was cursed with out of the factory). If you wanted to replace your exhaust, I'd start with the axle-back so that you can find which kind of sound you like. Then you have the option of either going with the Nitto midpipe (available from microimageonline.com) or custom-fabricating your own midpipe (warning: the Nitto midpipe does not have any catalytic converters; they're just resonators). And you know, I would recommend replacing the header. The stock design is rather convoluted and doesn't lend itself well to a good exhaust flow. For this you have many options: TRD (expensive as all hell), Megan, DC, Thunder, DME, or, again, custom make your own. If you plan on doing more performance modifications to your car, a good exhaust system is pretty much invaluable. Hope that answered your question well enough :D
most definitely thanks... thought i was being ignored. 😢
mrbondIllinois · Mar 13, 2009#55
Originally Posted by frownonfun ↑
most definitely thanks... thought i was being ignored. 😢
Lol, yeah I was going through some threads I wrote in a while back and I saw that no one had replied to you yet. I hate it when people don't answer my questions, so this is my way of working with karma 😆
But yeah, the most amount of play you'll have is with the headers. Some improve the power more at the lower end of the rpm band, some at the middle, some at the top. The DME header is best, imo, for just spirited around-town driving. It's pricier than most, but not by much.
Cheers! Always eager to help out fellow Yaris owners - especially ones that like the new iQ (I'm buying that as soon as the first-year bugs are out 👍)
PETERPOOPOahu · Mar 19, 2009#57
2.25" mandrel bent Header back exhaust with a magnaflow muffler. Oh yah, I have a resonator too, even though you can't tell! hah

Be sure to click "HQ" below the video player for both videos to view it in High Quality!

Here's a video that shows the muffler and some clips of me driving the car with the camera inside:

http://www.youtube.com/watch?v=My6Rh6VhdzA

Here's my doing a fly by the camera:

http://www.youtube.com/watch?v=FdcMqbM7Ec0
anonymous userwindward oahu · Mar 21, 2009#58
Originally Posted by PETERPOOP ↑
Hey thanks! It IS loud. haahha. I'm working on getting a longer resonator and maybe throwing a hi flo cat on there.

Hawaii does NOT recquire smog inspections! we are allowed to not have any cats. whoohooo!




Well I was getting around 38-40 mpg before the S/C, but now I am getting around 29-31 mpg. It IS a sacrafice, but I believe the trade off is worth it.
Removal of all of your cats is definitely not legal in hawaii. Yes, we have no smog inspect., but they can check to see if you are running catless.
changchewsoonMalaysia · Apr 1, 2009#59
Decat, 2.2 inch, custom box, dual exhaust dual titanium tip.

Picture not included in this copy

Picture not included in this copy
The SpectacleTampa, FL · Apr 7, 2009#63
Custom work done locally here in St Pete. Stainless steel, mandrel bent, 2.0 inch piping. Magnaflow muffler.

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy

When I get a chance I'll take some better pics and a vid clip or two.

- The Spectacle
revoturboIndonesia · Apr 7, 2009#64
NIce works.. 🎉
AznGoukiCalgary · Apr 9, 2009#65
This may be the most retarded question but does the 5 door and the 3 door have the same exhaust? Like if I bought a exhaust labeled 3 door, will it fit my 5? Some times I feel so dumb haha
MouseMiami, Fl. · Apr 9, 2009#66
2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.
PETERPOOPOahu · Apr 9, 2009#67
Originally Posted by Mouse ↑
2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.
Wrong. Probably make it worst. 2" is perfect for N/A. If he went with bigger piping, he'd be LOSING power in the low to mid range.
MouseMiami, Fl. · Apr 9, 2009#68
so why not go with 1.5"...2.25" is the perfect size for NA applications. Anything bigger is for more peak horse power.
The SpectacleTampa, FL · Apr 10, 2009#70
Originally Posted by Mouse ↑
2" is small...I personally would've gone with 2.25" for NA application. It will help with low to mid range power.
You honestly think .25 inch is going to make a difference on a 1.5L 100hp car????

Well, it will be louder and slower. So maybe just not the difference you're looking for. I certainly wasn't.
MouseMiami, Fl. · Apr 10, 2009#71
Well, if the stock exhaust diameter is 1.75" then the extra .5" would make a difference.

Did you see a difference in going from 1.75" to 2.00"?
That's only a .25" difference.
jdinrcSouthern California · Apr 10, 2009#72
There is a significant difference in only 0.25".

2" pipe is 3.14in/sq area
2.25" pipe is 3.97in/sq area
That's a 26.4% increase in flow capacity going from 2" to 2.25". Sounds like 26% would make some sort of difference to me.
thebarberGrand Rapids, MI · Apr 10, 2009#73
megan axleback

Picture not included in this copy

Picture not included in this copy
treppenJ-ville Flo-rida · Apr 24, 2009#74
Axel back

4 attachments not included in this copy

monchito18Puerto Rico, Isabela · Apr 24, 2009#75
Good Results with Automatic Transmission? I have an Automatic Sedan and want to know.
TamagoOff Grid · Apr 25, 2009#76
Originally Posted by PETERPOOP ↑

Anyways, the power from a NA yaris will lose torque with 2.25" piping. I'm leaving it at that.
please prove this blanket statement with dyno graphs of a stock exhaust yaris vs a 2.25" exhaust, done on the same day, same air temperature, same humidity, same yaris.
JerkrattFair Lawn, NJ · Apr 27, 2009#77
finally got a chance to put the CEL box that garm sells into the mid pipe. it works, I've scanned with scan gauge and cleared prior (cel temp. off) then installed. has been fine ever since
thebarberGrand Rapids, MI · Apr 27, 2009#78
megan axleback w/ muffler painted flat black
Picture not included in this copy
nisyotaOrlando, USA · May 18, 2009#80
Originally Posted by PETERPOOP ↑
Are you not listening to me. You will lose torque going with 2.25". You don't need it that big. But whatever you want.

i have to agree with peterpoop... im running 2.25" pipes on my Nissan Titan (5.6L 321hp with 353 ft lbs/tq running 13.88 in 1/4 mile)... Originally the pipes are only 1.98". If i go up to 2.5" than ill be losing enough low end torque that i cannot get a good 60' time. BUt, the high end will be better since the flow will be faster... But for low to mid range, i think 2.25" is a little high...

test them at a Drag Race Track. Doesn't matter the driver, well kinda does. But take 2 yaris'. Same Mods, except the only difference is that one is 2" piping and the other is 2.25" pipes. You will see that the 2" will have a better 60' and all the way up to the 1/8 mile... BUt after that the 2.25" will take over because there is more air flow...

But, this isn't really the thread to discuss this. I just had to put this out there since there is also confusion with my truck with other people thinking bigger is better, which is not... :D

Oh, how come i see more pics than videos of the exhausts? I want more videos and more burnouts. LOL
N3misiSSouth Africa · May 20, 2009#81
I have Posted my Pics here to and I found for everyday use 2" is better to zip along with tafic etc. I have also tested this theory already, and I speak my Yari is getting Dyno Tuned branches\Headers being Build for it, what I will do is try and post the Dyno Charts for the diffrent Pipes and header combo's, I am in SA though but it could be used as a guide for everyone else out there, btw it is the T1 and its being done by Viper Exhaust, I Cant wait....
nisyotaOrlando, USA · May 20, 2009#82
i think the only thing the dyno charts will do is show different points of shifting or is it the location of the peak power for the car...

2." for more of a down low hp and tq and 2.5" for up top... itll might show the same or close to numbers, but the power band will be different... anyways, don't forget to show video and pics of the dyno!! :D
N3misiSSouth Africa · May 20, 2009#83
I wil do my best bro, One thing to remember, it is a 1KRFE, at the moment they have finished the branch and silencer System! We are just waiting for the knuckle's (connectors) originally I was getting 58Kw out of the original custom exhaust... I got the results today for that, so as soon as the knuckles come in and we have tested this I will let you guys know... The guys at Viper is really out doing themselfes, and I will be the first ever Yari T1 with developed Exhaust\Header and not those Crappy BS you get for a 1\4 of the price.... WIll keep you guys Up to date!!
N3misiSSouth Africa · May 24, 2009#84
More news Guys, I went to check on the new System, and Helll!!!! its cooking!
I am getting my car back this week! with the Dyno, and pics.... before and after!!!

No one here has really done stuff to the lil 3Cyl 1KR-FE....

More Updates this week!
nisyotaOrlando, USA · May 27, 2009#85
LOL, can't wait to see the final production...
lilredrocketDFW, Texas · Jun 8, 2009#87
Here's mine I got it done last week
eiiLong Beach, CA · Jul 13, 2009#88
If you didnt see any of my post in my other threads on my exhaust sound clip, here you go..

Made a quick video of how my performance setup sounds like. The engine mods are:

TRD Axle-Back Exhaust, Simota Carbon Charger Intake, NST Lite Crank Pulley Red, 1ZZ-FE Throttle Body, and AMK Racing Header.

Direct Link: http://www.inimi.org/downloads/eiiexhaust.avi
YouTube Link: http://www.youtube.com/watch?v=rgQiuWupPgw
y75Italy · Aug 9, 2009#90
Steel and carbon italian manifactured muffler Asso racing🎉

1 attachment not included in this copy

gatomanMIA · Aug 20, 2009#91
Originally Posted by eTiMaGo ↑
Well here are the 2 exhausts I have used so far, first the HKS Hi-Power, friggin noisy but a good tone... Pics with both the regular bumper and the RS. Exhaust currently owned by ChinoCharles, a collector's item of YW lore 😁

videos:
http://www.youtube.com/watch?v=K1KCFDCffuA
http://www.youtube.com/watch?v=w-PMaIB0PdU
dude.......... you cars are so nice.... i can safetly say they look batter then a vw gti IMO... and its like 10 k cheaper =D... when i get a yaris i would like an exhaust like that😁
mikenacaratoBrentwood, TN · Aug 31, 2009#92
TRD xD exhaust with the tip piping cut down 2.5" so it doesnt stick out so far.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
posaunemeisterKansas City, MO · Sep 9, 2009#93
Here are a couple of pics of my custom axleback. I hacked the muffler off from the stock axleback exhaust piping, drove it to the shop, and had a tech weld everything (2 1/4" piping and a 2 1/4" Dynomax Super Turbo muffler) together. This morning, I spray painted the entire axleback with three coats of high temp, high gloss black paint (w/ Ceramic) to conceal it and protect it from the elements.

It sounds great and flows well! I did not lose any noticeable low end at all. In fact, it feels as though I've gained some. I have to take the interstate tonight -- I can't wait. 👍

The total exhaust cost me $150, but it was definitely worth it, as I plan on having this car for many years to come. I mean, I almost spent that much on my NST 10% underdrive pulley (which I will install tomorrow night, btw).

Anyway, let me know what you guys and gals think. I apologize for the low quality cellphone pics.

3 attachments not included in this copy

zer0sk8ordiesocal · Sep 20, 2009#94
Originally Posted by TOUGEghost ↑

Greddy Ti-C:
Picture not included in this copy

Picture not included in this copy
is this the 09 S? the exhaust clears the lip ok?
kid chinoEdmonton, AB · Oct 1, 2009#95
Originally Posted by zer0sk8ordie ↑
is this the 09 S? the exhaust clears the lip ok?
I have an 09 rs same as the us spec s with a greddy ti-c fitment is perfect the tip sits a bit underneath the rear lip but looks and sounds great
thebarberGrand Rapids, MI · Oct 3, 2009#96
megan axleback w/ custom 2.25" crush bent midpipe from resonator to axle flange

Picture not included in this copy

Picture not included in this copy

Picture not included in this copy
E.R.GAruba · Nov 8, 2009#97
Is it posible for example to use a DC header and then a magnaflow exhaust, without cats and/or resonator??
RacerFreakXXXSomers NY · Dec 23, 2009#98
is a 2.5" exhaust too big for n/a?
Kaotic LazagnaCentral Valley, CA · Dec 23, 2009#99
Originally Posted by RacerFreakXXX ↑
is a 2.5" exhaust too big for n/a?
Excessively. Even my 2.25" is too big, imo.
thebarberGrand Rapids, MI · Dec 24, 2009#100
my 2" from the resonator back is perfect.