I already said this...Hushpower does wonders. Get it and say goodbye to raspOriginally Posted by hartley1080 ↑Still waiting for a nice day to get the go pro out and take a good video. I think most of the rasp is coming from the muffler I am going to add a resonator and the dc sports exhaust and header but, will take a video of the current setup. Hopefully have something uploaded Monday. Recommendations for a good resonator ?
New Exhaust OBX RACING
103 posts · 39,613 views · page 2 of 3
Replies continued
Any Idea were I can get a HushPower resonator.
Any word on the size of this pipe.
Just measured the pipe it is 2.25 O.D.
ID or OD?Originally Posted by hartley1080 ↑Just measured the pipe it is 2.25
Wow how about google that shit
True im looking more for ID.
Will check the I.D. soon
lol http://lmgtfy.com/?q=purchase+hushpower+resonatorOriginally Posted by malibuguy ↑Wow how about google that shit
Is that how that website works? I always get so confused when I get there. lolOriginally Posted by 47_MasoN_47 ↑
It can be confusing. So many steps in the process :P
Thanks for the link
Just installed this OBX on my 07 LB and now I have a little bit of ping going on. I put one of the 2 Cats back in (after the O2 sensor) and figure that's the problem. Let me know if I should put the other Cat in or move the O2 sensor to after the Cat.???🤷
Since both O2 sensors are basically seeing the same thing now I would guess I'm right with the location thing. just want a second opinion.
Since both O2 sensors are basically seeing the same thing now I would guess I'm right with the location thing. just want a second opinion.
Stock location is after the first cat.
So the 2nd cat doesn't matter at all as far as the ECU is concerned.
If you have one cat, the second O2 sensor should be after that.
I'm surprised you aren't getting a CEL with both sensors seeing basically the same thing. Your car should be thinking your cat is not working. 🤷
So the 2nd cat doesn't matter at all as far as the ECU is concerned.
If you have one cat, the second O2 sensor should be after that.
I'm surprised you aren't getting a CEL with both sensors seeing basically the same thing. Your car should be thinking your cat is not working. 🤷
Got the CEL too, just didn't mention it. I'll be relocating the O2 sensor this weekend when I put in the resonator. Thanks for the quick reply and reaffirmation of my suspicions. Would the ECU lean out the mix because of what the 2nd O2 sensor sees?
The first sensor isn't an O2 sensor, it's a A/F sensor. The second is indeed an O2 and is only there to read what's coming out of the CAT.
Just keeping it simple. I knew he must be getting a CEL.
Are they both the same thing just used for different purposes? Are there any other consequences to moving the O2 sensor further downstream? Should I wrap the headpipe to keep the cat warmer? Just trying to get as much info as possible before I get under there one more time.
^ The two sensors are not the same. Technically, the first one is more of an air/fuel sensor (though it's kind of a weird hybrid design by the way the ECU reads the voltages) and the second one is an O2 sensor to monitor the cat. Pretty sure that's all it does.
Why would you move it downstream?
And why would you want it to be "warmer"?
Why would you move it downstream?
And why would you want it to be "warmer"?
Downstream past the Cat. Catalytic converters function better at higher temps leading to a more accurate reading for the O2 sensor. Higher temps within reason of course. I've seen melted catalyst in engines that ran waayy too lean. Anyway, thanks for the clarity on the sensors.
yes, as discussed the 2nd sensor must be AFTER the cat.
They are both platinum coated zirconia sensors, but the Air/Fuel sensor has the ability to detect the ratio over a wide range (i.e wide band sensor). The heated O2 sensor can only detect that the AFR is at stoich or is rich or lean - It can not detect how rich or lean it is.Originally Posted by cali yaris ↑^ The two sensors are not the same. Technically, the first one is more of an air/fuel sensor (though it's kind of a weird hybrid design by the way the ECU reads the voltages) and the second one is an O2 sensor to monitor the cat. Pretty sure that's all it does.
Why would you move it downstream?
And why would you want it to be "warmer"?
So, the air/fuel sensor before the cat allows the ECM to precisely control the ratio and the heated O2 sensor after the cat allows the ECM to monitor that the fuel ratio is properly adjusted to allow optimal operation of the 3 stage cat (which performs best at an AFR of 14.7).
So, after moving the O2 sensor to after the Cat I still have the lean condition. (Light pinging). Should it correct itself or should I disconnect the battery and clear the ECU? If this continues, what would happen if I upgraded the injectors (cart before the horse??)? By the way, no CEL for 3 days so the lean condition just seems to be what the engine wants??? Fricken weird if you ask me.
I thought with our "smart" ecu's that kinda stuff would be auto corrected by the car and have more fuel dispensed to meet the demand the increased air creates.
I agree but i still hear a little pinging and power is down a little too. 🤷
I'm going to do a little research on injectors and see if I can fool the ECU a little bit. if not, I might go with 1 extra injector and go analog on the control.
All I can say is DAMN COMPUTERS😠. I miss my 1967 Porsche 912. 2 carbs, 1 coil and the most electronic part of the car was the radio. Don't ask.
I'm going to do a little research on injectors and see if I can fool the ECU a little bit. if not, I might go with 1 extra injector and go analog on the control.
All I can say is DAMN COMPUTERS😠. I miss my 1967 Porsche 912. 2 carbs, 1 coil and the most electronic part of the car was the radio. Don't ask.
Definitely disconnect the battery and force a relearn. I would do this anytime any change is made to an engine/performance part on the car.
Just ordered this... Noticed over the weekend that we have a leak where one of the hangers is welded on the custom exhaust on the 99. The off-track excursions have also crushed the tubing in a few spots. So it was time to rebuild it, and this is way less than the custom setup. We will just hack off the OBX muffler and use our Coast Fabrication race muffler.
Have not had time to put the new exhaust on, but did start the prep work - we are not using the heavy OBX muffler, we will use a Coast Fab lightweight muffler, so I went at it with the plasma cutter.
They put a lot of fiberglass in the case.
Picture not included in this copy
Not so sure how the Scotch tape is going to hold up in there. 😆
Picture not included in this copy
Not much of a heat barrier between the tube and first layer of fiberglass. And the perforated section is only 6" long, not much sound going into the case, but a lot of it going out the back.
Picture not included in this copy
They put a lot of fiberglass in the case.
Picture not included in this copy
Not so sure how the Scotch tape is going to hold up in there. 😆
Picture not included in this copy
Not much of a heat barrier between the tube and first layer of fiberglass. And the perforated section is only 6" long, not much sound going into the case, but a lot of it going out the back.
Picture not included in this copy
And for some reason, that mess doesn't quiet things down nearly as well as it looks like it would. I replaced mine as well with a Monza resonated tip and a baffled glasspack-style muffler. Waaay better sound and no sharp rasp.
So after a few months of looking at the OBX sitting in the corner of the garage I took some time today and tried to install it... I say try because it turns out the header on the 99 car is not an exact match to the production DC Yaris header (the first clue is the fact is has no O2 bung, we think this may have been the prototype), the exit of the collector is at a different angle than the OE and DC header so the OBX will not line up with my headers outlet. 😠
Rather than mod the OBX we are just patching up the exhaust that is already on the car.
Kind of wish I had not cut off the OBX muffler before the test fit. 😆 Oh well. If anyone using a OE/DC/WR headers wants the start to a killer custom setup I will make you a great deal. Just install your favorite race muffler (I recommend Coast Fabrication) and you will be ready to rock.
Rather than mod the OBX we are just patching up the exhaust that is already on the car.
Kind of wish I had not cut off the OBX muffler before the test fit. 😆 Oh well. If anyone using a OE/DC/WR headers wants the start to a killer custom setup I will make you a great deal. Just install your favorite race muffler (I recommend Coast Fabrication) and you will be ready to rock.
I ended up buying this exhaust off of amazon for $175 shipped. Since it's 2" I plan on cutting it and welding it onto the stock exhaust right at the end of the resonator where the diameter reduces to 1.75". If figured with the time and cost to have a shop make me a crush bend mid-pipe I could get this and have them cut and install it instead.
I'll post a video after I get this installed tomorrow. Also to clairify, I measured the inner diameter at 2.25".
I don't think it will be too loud since it will still have both cats and the stock resonator. I had a Megan axle back before that was very quiet, but I ended up taking it off because i have my car quite low and it was hitting the suspension.
I don't think it will be too loud since it will still have both cats and the stock resonator. I had a Megan axle back before that was very quiet, but I ended up taking it off because i have my car quite low and it was hitting the suspension.
I got the exhaust installed today. Like I said previously I had the factory and OBX exhausts cut to meet just after the factory resonator.
I took a picture of the inside of the resonator so you all could see that is straight-through in design. I was going to have it changed out if it wasn't, but looking at it there didn't seem a reason to have it replaced.
Some work was required to make the muffler fit into the space available under the car, we had to take a sledge hammer and hammer the spare tire well in a bit as well as bend the toe-hook out a half-inch so that the muffler could be fitted nice and tight under the car. With the factory hangers it wanted to hang pretty low, we used the OBX back mount that holds onto the pipe next to the muffler and the exhaust shop welded a hanger to the top of the muffler, just out of sight.
The muffler is quite loud compared to the Megan axle-back I had before. I'm going to give it a week before I make a final decision but I might have it cut off and changed out with a Magnaflow or some other exhaust. I do really like the way the muffler looks though, the tips look nice tucked up right under the bumper.
Here's a video, I should have revved the car up a bit more but it's what I have for now. I'll take another one and post it when I get a chance.
http://www.youtube.com/watch?v=niZYgO0vvrU&feature=plcp
And to respond to TPA5, while loud, there is no buzz or rasp that you sometimes get. I've had a lot of Honda cars so I know what you mean about buzzy or raspy. If this car was a bit faster I could justify the sound it makes, but for now I would like it a bit quieter.
I took a picture of the inside of the resonator so you all could see that is straight-through in design. I was going to have it changed out if it wasn't, but looking at it there didn't seem a reason to have it replaced.
Some work was required to make the muffler fit into the space available under the car, we had to take a sledge hammer and hammer the spare tire well in a bit as well as bend the toe-hook out a half-inch so that the muffler could be fitted nice and tight under the car. With the factory hangers it wanted to hang pretty low, we used the OBX back mount that holds onto the pipe next to the muffler and the exhaust shop welded a hanger to the top of the muffler, just out of sight.
The muffler is quite loud compared to the Megan axle-back I had before. I'm going to give it a week before I make a final decision but I might have it cut off and changed out with a Magnaflow or some other exhaust. I do really like the way the muffler looks though, the tips look nice tucked up right under the bumper.
Here's a video, I should have revved the car up a bit more but it's what I have for now. I'll take another one and post it when I get a chance.
http://www.youtube.com/watch?v=niZYgO0vvrU&feature=plcp
And to respond to TPA5, while loud, there is no buzz or rasp that you sometimes get. I've had a lot of Honda cars so I know what you mean about buzzy or raspy. If this car was a bit faster I could justify the sound it makes, but for now I would like it a bit quieter.
5 attachments not included in this copy
You want loud...then try this thing
Holy crap this bugger is loud, I cant imagine what this would be like as bolt on.
I just had the same OBX system installed but spliced in a hi-flo cat & a resonator (both Vibrant parts)...Pictures to follow
Can anyone please suggest a quieter muffler cos this one has gotta go
Holy crap this bugger is loud, I cant imagine what this would be like as bolt on.
I just had the same OBX system installed but spliced in a hi-flo cat & a resonator (both Vibrant parts)...Pictures to follow
Can anyone please suggest a quieter muffler cos this one has gotta go
tanabe medallion touring.....or stock 👍Originally Posted by yak ↑You want loud...then try this thing
Holy crap this bugger is loud, I cant imagine what this would be like as bolt on.
I just had the same OBX system installed but spliced in a hi-flo cat & a resonator (both Vibrant parts)...Pictures to follow
Can anyone please suggest a quieter muffler cos this one has gotta go
I had a Vibrant that was reasonably quiet. Which one did you get? You can't miss with Magnaflow, it will be very deep and warm.
🤣🤣 TWSSOriginally Posted by cali yaris ↑it will be very deep and warm.
I do prefer the deep bass growl of the exhaust. I can live with what i have, its as loud as I want it, with no highway drone, just lacks the depth and warmth. Time to do some more research.
Dynomax vt. Quiet until you lean on the throttle. No drone.
I got one of these sitting in my shop. Decided to install it so I ordered a Cat and resonator from Magnaflow. Gonna cut it up later this week and weld it all together, see what this set up sounds like. I'll post a video after.
MagnaFlow is a good choice. 🙂
I run a Weapon R 4-2-1 header, and Garm's MagnaFlow center exit exhaust with a stainless steel resonator tip. It sounds super deep and mellow with no drone.
https://www.youtube.com/watch?v=FL4CcjF8Z18
Greg
I run a Weapon R 4-2-1 header, and Garm's MagnaFlow center exit exhaust with a stainless steel resonator tip. It sounds super deep and mellow with no drone.
https://www.youtube.com/watch?v=FL4CcjF8Z18
Greg
Oh thank you Greg. That's sounds exactly like what I did on other cars. Your car sounds awesome.Originally Posted by tooter ↑MagnaFlow is a good choice. 🙂
I run a Weapon R 4-2-1 header, and Garm's MagnaFlow center exit exhaust with a stainless steel resonator tip. It sounds super deep and mellow with no drone.
https://www.youtube.com/watch?v=FL4CcjF8Z18
Greg
The resonator I got is too long but I have all the tools (toys) in the shop at work to cut open and shorten it. 🙂 I absolutely need to install the Catalyctic converter on it too because here if I get caught I get a nasty ticket plus sent to inspection.
Also a 1ZZ TB sitting in my home shop to be installed. 😉
Cool. 🙂Originally Posted by Rigaud ↑Oh thank you Greg. That's sounds exactly like what I did on other cars. Your car sounds awesome.
The resonator I got is too long but I have all the tools (toys) in the shop at work to cut open and shorten it. 🙂 I absolutely need to install the Catalyctic converter on it too because here if I get caught I get a nasty ticket plus sent to inspection.
Also a 1ZZ TB sitting in my home shop to be installed. 😉
Don't forget to knock off the epoxy from the tiny factory adjusted hex head idle screw and turn it out one turn counter clockwise... before you install it. You'll be glad you did... 😉
(screw is at top center of photo just to the left of the nut)
Picture not included in this copy
The butter fly is set to idle a 1.8 engine which is way too far open to idle a 1.5. If you don't turn it down, the ECU will go crazy trying to find an idle outside of its operating parameters.
Greg
Hi Greg, thanks for the info!
I installed my OBX exhaust line last night with a Magnaflow Cat and resonator. I cut the resonator shorter to fit, the one I had was too long. All rewelded like the way it was purchased. My header, a 4-1 of low quality (better then stock manifold) was missing the bung for the sensor, another item to drill a hole for and mig weld. Got it all done and I was pleasantly surprised with the front to rear line. No drumming at all or resonance through the floor. Nice deep sound up to 2500 - 2700 but higher then that and it's too loud for street driving. Gonna pick up some medium and fine stainless steel wool and cut open the muffler. Might redirect the internals depending how it flows too.
As for the 1ZZ TB, that went well and I really don't understand why people use a union to bypass the coolant lines. One of the hoses is placed just right and long enough to simply cancel one hose and use the other to connect in a loop. Voila.......solved. Removed the epoxy on the idle setscrew but haven't turned it yet. I did the chip swap while everything was plugged in. Drilled the rivets, swapped and new rivets. I messed up my intake tube so I made the stock tube and airbox fit, no issues with anything at all. That's temporary till I get it done right with my K7N cone filter.
Sorry Greg, I saw your response after I did it. I have a 2700 rpm cold start up and it lasts 20-30 secs and goes down but warm idle is at around 1000rpm. I'll adjust the idle with the engine and ignition off. Proper idle will solve that high idle Code I got, settle it at around 750rpm. Now I need to get a quicker response, anything I can do or add (module) to rectify the response time?
Cheers
John
I installed my OBX exhaust line last night with a Magnaflow Cat and resonator. I cut the resonator shorter to fit, the one I had was too long. All rewelded like the way it was purchased. My header, a 4-1 of low quality (better then stock manifold) was missing the bung for the sensor, another item to drill a hole for and mig weld. Got it all done and I was pleasantly surprised with the front to rear line. No drumming at all or resonance through the floor. Nice deep sound up to 2500 - 2700 but higher then that and it's too loud for street driving. Gonna pick up some medium and fine stainless steel wool and cut open the muffler. Might redirect the internals depending how it flows too.
As for the 1ZZ TB, that went well and I really don't understand why people use a union to bypass the coolant lines. One of the hoses is placed just right and long enough to simply cancel one hose and use the other to connect in a loop. Voila.......solved. Removed the epoxy on the idle setscrew but haven't turned it yet. I did the chip swap while everything was plugged in. Drilled the rivets, swapped and new rivets. I messed up my intake tube so I made the stock tube and airbox fit, no issues with anything at all. That's temporary till I get it done right with my K7N cone filter.
Sorry Greg, I saw your response after I did it. I have a 2700 rpm cold start up and it lasts 20-30 secs and goes down but warm idle is at around 1000rpm. I'll adjust the idle with the engine and ignition off. Proper idle will solve that high idle Code I got, settle it at around 750rpm. Now I need to get a quicker response, anything I can do or add (module) to rectify the response time?
Cheers
John
If i understand correctly the obx system would also fit the mk1 yaris 1999-2005?
I have a diesel yaris so maybe need to modify the part that meets the header
I have a diesel yaris so maybe need to modify the part that meets the header
It's ok, no harm done. Mine ran high until and drove the ECU crazy hunting around in vain for an idle until I figured it out.Originally Posted by Rigaud ↑Hi Greg, thanks for the info!
Sorry Greg, I saw your response after I did it. I have a 2700 rpm cold start up and it lasts 20-30 secs and goes down but warm idle is at around 1000rpm. I'll adjust the idle with the engine and ignition off. Proper idle will solve that high idle Code I got, settle it at around 750rpm.
One hint: make damn sure that the allen wrench you put into that little screw fits tight, because it does not want to turn, and you do not want to strip the head. Use a magnifying glass to determine that all of the epoxy is knocked off. Penetrating oil can help it to break free. When it moves, it will make a satisfying cracking sound and you're home free. 🙂 I found that about one counterclockwise turn closes the butterfly enough to get a good stable idle. After I got mine where I wanted it, I simply put a little dab of clear silicone caulk to make sure it stays there.
Now I need to get a quicker response, anything I can do or add (module) to rectify the response time?By quicker response, do you mean quicker opening or quicker closing?
Cheers
John
My Yaris has always been slow to close (long throttle hang time) from the very first day I bought it brand new bone stock. I'd get one of those aftermarket throttle control thingies except there's no way to confirm if they will actually cause the butterfly to close faster than stock. So I've gotten used to compensating by letting off the gas first without touching the clutch pedal, waiting a beat, and then shifting.
Greg
Thanks Greg.Originally Posted by tooter ↑It's ok, no harm done. Mine ran high until and drove the ECU crazy hunting around in vain for an idle until I figured it out.
One hint: make damn sure that the allen wrench you put into that little screw fits tight, because it does not want to turn, and you do not want to strip the head. Use a magnifying glass to determine that all of the epoxy is knocked off. Penetrating oil can help it to break free. When it moves, it will make a satisfying cracking sound and you're home free. 🙂 I found that about one counterclockwise turn closes the butterfly enough to get a good stable idle. After I got mine where I wanted it, I simply put a little dab of clear silicone caulk to make sure it stays there.
By quicker response, do you mean quicker opening or quicker closing?
My Yaris has always been slow to close (long throttle hang time) from the very first day I bought it brand new bone stock. I'd get one of those aftermarket throttle control thingies except there's no way to confirm if they will actually cause the butterfly to close faster than stock. So I've gotten used to compensating by letting off the gas first without touching the clutch pedal, waiting a beat, and then shifting.
Greg
I'll continue this dialogue we got going on my thread so we don't throw this one off the rails. hehehe
2009 Black 3-Door HB
I just installed the OBX exhaust. I paid 175 including shipping from Sparktec. I couldn't pass it up for that price. It is a Cat delete full exhaust. It measured 2 1/4 OD and just under 2 1/8 ID. Hangers were all in the right spot. O2 bung was there, but will def need a non fouler since I set off they CEL within the first 25 min of driving. It has a nice deep tone to it, mid RPM it has a slight fart can sound, you won't be mistaken for a civic but it's there.. It has a good scream when up around the limiter. I'll post some videos and pics in a couple days. Overall I am happy with the purchase. I put a magnet to it and it didn't stick so I'm guessing its actually SS and not chromed metal. It was a fairly easy install. One of the manifold bolts was a b*tch to get off. Got new bolts and gasket to connect it to manifold and made sure to put anti sieze so I wouldn't have that same problem. One thing that helped me out a lot when installing the bolts to the manifold I compressed the springs and put zipties on them to keep them compressed, and cut them off once I had the bolts in the threads. Also ground down the retainer on the bolts just a little, if you get one you'll know what I'm talking about.
My final plan for it is to cut the muffler off and put a 100 cell catalytic converter where it was with a 7 inch resonated tip. That will hopefully be done in a few weeks when I go visit my parents and have access to a welder. I'll post up some pics and vids of that as well when I get it done.
My final plan for it is to cut the muffler off and put a 100 cell catalytic converter where it was with a 7 inch resonated tip. That will hopefully be done in a few weeks when I go visit my parents and have access to a welder. I'll post up some pics and vids of that as well when I get it done.
I had no choice but to instal a cat, driven on the street and don't feel like getting towed plus a fine. I used a freeflow cat from Magnaflow and also used a 6" dia. muffler custom cut shorter as a resonator. Second year with this system and all is A1.Originally Posted by 07dirtyaris ↑I just installed the OBX exhaust. I paid 175 including shipping from Sparktec. I couldn't pass it up for that price. It is a Cat delete full exhaust. It measured 2 1/4 OD and just under 2 1/8 ID. Hangers were all in the right spot. O2 bung was there, but will def need a non fouler since I set off they CEL within the first 25 min of driving. It has a nice deep tone to it, mid RPM it has a slight fart can sound, you won't be mistaken for a civic but it's there.. It has a good scream when up around the limiter. I'll post some videos and pics in a couple days. Overall I am happy with the purchase. I put a magnet to it and it didn't stick so I'm guessing its actually SS and not chromed metal. It was a fairly easy install. One of the manifold bolts was a b*tch to get off. Got new bolts and gasket to connect it to manifold and made sure to put anti sieze so I wouldn't have that same problem. One thing that helped me out a lot when installing the bolts to the manifold I compressed the springs and put zipties on them to keep them compressed, and cut them off once I had the bolts in the threads. Also ground down the retainer on the bolts just a little, if you get one you'll know what I'm talking about.
My final plan for it is to cut the muffler off and put a 100 cell catalytic converter where it was with a 7 inch resonated tip. That will hopefully be done in a few weeks when I go visit my parents and have access to a welder. I'll post up some pics and vids of that as well when I get it done.
I finally got video of the OBX exhaust.
https://youtu.be/Pd999uXGkEA
I have others where im driving on a closed off timber road up in Michigan. (My dad said he was able to hear it screaming through the forrests almost 2 miles away!)They are on my phone with a broken screen!! as soon as i fix it ill post those up here as well. I didnt get the time to put on the cat and resonator and cut the muffler like i planned a couple weeks back. wiring up my switches took up more time than i expected.
The exhaust did set off a CEL. I bought a BLOX Racing Check engine light remover adapter for 10.XX on Amazon. I have driven almost 1500 miles since i put it on and have not had a CEL go off.
https://youtu.be/Pd999uXGkEA
I have others where im driving on a closed off timber road up in Michigan. (My dad said he was able to hear it screaming through the forrests almost 2 miles away!)They are on my phone with a broken screen!! as soon as i fix it ill post those up here as well. I didnt get the time to put on the cat and resonator and cut the muffler like i planned a couple weeks back. wiring up my switches took up more time than i expected.
The exhaust did set off a CEL. I bought a BLOX Racing Check engine light remover adapter for 10.XX on Amazon. I have driven almost 1500 miles since i put it on and have not had a CEL go off.
Hey everyone, I just installed my obx last night and man is it loud! Took it on a test drive and all went well. It did not match up with 2014's original hangars, so some modifications were made. I'll post a video later today.
Sent from my SM-N920P using Tapatalk
Sent from my SM-N920P using Tapatalk