Super glad you're enjoying it, ern-diz. It's been a long process and it's not over yet. Always something to explore, but such a joy to drive. I would have no hesitation taking this car on a long road trip and using it as a daily driver. Yesterday I did quite a bit of driving both in town and highway. I had perfect, flawless and smooth idle, zero hesitation or bucking under any conditions, immediate throttle response under all conditions.Originally Posted by ern-diz ↑Sooo interesting to read/learn about.
2ZR Turbo Yaris
561 posts · 343,257 views · page 10 of 12
Replies continued
Awesome accomplishment. Hat's off!Originally Posted by 06YarisRS ↑Super glad you're enjoying it, ern-diz. It's been a long process and it's not over yet. Always something to explore, but such a joy to drive. I would have no hesitation taking this car on a long road trip and using it as a daily driver. Yesterday I did quite a bit of driving both in town and highway. I had perfect, flawless and smooth idle, zero hesitation or bucking under any conditions, immediate throttle response under all conditions.
It is all very interesting and looks like an unbelievable challenge. Following this thread has cemented my opinion that standalone is the best option for such a setup, though potentially much more expensive.
Still very impressive that you have gotten it to operate so well with a stock ECU and piggyback.
Still very impressive that you have gotten it to operate so well with a stock ECU and piggyback.
Thanks gents! It has been a challenge but for now, one that was worth it. Time will tell. LOL.
Leegamer, yes, the standalone is a very attractive option and actually I could have gotten a Haltech Elite 550 in the $800 - $900.00 range and I think it supports DBW. I have not yet done enough research on the unit to know definitively if I could maintain all of my other accessories/peripherals. Also, the TCM is built into the stock ECU as far as I know, so not sure what would be involved with that. The HUGE advantage, in my opinion, would the ability to control closed loop fueling.
Leegamer, yes, the standalone is a very attractive option and actually I could have gotten a Haltech Elite 550 in the $800 - $900.00 range and I think it supports DBW. I have not yet done enough research on the unit to know definitively if I could maintain all of my other accessories/peripherals. Also, the TCM is built into the stock ECU as far as I know, so not sure what would be involved with that. The HUGE advantage, in my opinion, would the ability to control closed loop fueling.
Sadly for DBW you need a 1500 or above, looked into these too, but beyond my budget :(Originally Posted by 06YarisRS ↑Thanks gents! It has been a challenge but for now, one that was worth it. Time will tell. LOL.
Leegamer, yes, the standalone is a very attractive option and actually I could have gotten a Haltech Elite 550 in the $800 - $900.00 range and I think it supports DBW. I have not yet done enough research on the unit to know definitively if I could maintain all of my other accessories/peripherals. Also, the TCM is built into the stock ECU as far as I know, so not sure what would be involved with that. The HUGE advantage, in my opinion, would the ability to control closed loop fueling.
You should look into ECUMaster, they make really well-featured units for some really good prices, there's a good chance I will be getting one of these.
Thanks! Yeah, the 1500 is getting up there. A serious amount of cash to drop for one part of build, for sure. I will definitely have a look at the ECUMaster.Originally Posted by eTiMaGo ↑Sadly for DBW you need a 1500 or above, looked into these too, but beyond my budget :(
You should look into ECUMaster, they make really well-featured units for some really good prices, there's a good chance I will be getting one of these.
I've been looking at their ECU's and they seem well priced.Originally Posted by eTiMaGo ↑Sadly for DBW you need a 1500 or above, looked into these too, but beyond my budget :(
You should look into ECUMaster, they make really well-featured units for some really good prices, there's a good chance I will be getting one of these.
Does anyone know if you can essentially run a non drive by wire standalone ECU while leaving the factory ECU only connected to the throttle and maf sensor?
My hvac is all gone and as far as I know the only thing I would need is the maf sensor reading for throttle control for the factory ECU to still work
I was wondering this precise thing this morning. It would be nice and a cost savings too probably. But, I'd hate to be the one to try it out. Lol. The ECUMaster Black looks like quite a feature-rich computer and for around a grand, not out of reach necessarily.Originally Posted by tmontague ↑
Does anyone know if you can essentially run a non drive by wire standalone ECU while leaving the factory ECU only connected to the throttle and maf sensor?
Right now my car is running great. I REALLY want closed loop fueling control, though.
I agree, I just checked out their website and they have an ecu that can control drive by wire. However I just realized that the stock ECU controls the rad fan as well on my car. I'd have to wire in a control for that if I wanted to fully scrap the factory ecu. Not something I necessarily feel I need to do right away although I dint think it would be a bad ideaOriginally Posted by 06YarisRS ↑I was wondering this precise thing this morning. It would be nice and a cost savings too probably. But, I'd hate to be the one to try it out. Lol. The ECUMaster Black looks like quite a feature-rich computer and for around a grand, not out of reach necessarily.
Right now my car is running great. I REALLY want closed loop fueling control, though.
I believe you could use one of the generic outputs and a relay to do a simple on/off control for the fans?Originally Posted by tmontague ↑I agree, I just checked out their website and they have an ecu that can control drive by wire. However I just realized that the stock ECU controls the rad fan as well on my car. I'd have to wire in a control for that if I wanted to fully scrap the factory ecu. Not something I necessarily feel I need to do right away although I dint think it would be a bad idea
I'm already talking with the local distributor and official tuner, they're up to the challenge :)Originally Posted by 06YarisRS ↑
Problem is, they are pretty far away from me, a good hour's drive (that's far, for us who live in small countries!)
Very exciting. Will definitely be following this.Originally Posted by eTiMaGo ↑I'm already talking with the local distributor and official tuner, they're up to the challenge :)
Problem is, they are pretty far away from me, a good hour's drive (that's far, for us who live in small countries!)
I did some reading on the 4A-GZE engine you have. Man, I would love one of those! Stock ready for 300HP! I can't wait to hear what you will ultimately be doing for forced induction and management on this car. This will be the bomb, for sure! 👏
Oil catch can ugliness and a little hoist action...
I drained the catch can today. I would say that I have run two to three full tanks of 93 through the car since I last checked the catch can. There wasn't much in the can, maybe 3 - 4 mL, but it's pretty stinky. LOL. I thought I detected a green tinge and for a second I panicked, thinking that I had coolant in there. I quickly recalled that Toyota coolant is pink. Just to be safe, I checked the coolant and it's pink and crystal clear. Checked the oil too and it's super clean and still clear with probably 2000 - 3000 kms on it. I was across the border gassing up with 93 again today and picked up another 2 jugs of SuperTech Full Syn. Great Rollback at $14.39 a jug. I'll do another oil change soon. Sadly, in about another month, my baby will have to be tucked away for winter. I'm having so much fun blasting about.
Contents of catch can. Sure glad that wasn't atomized and sent back into the cylinders.
Picture not included in this copy
I'm teaching the Internal Combustion Engines 110 at our school this semester. Unbeliveably, I am the most knowledgeable staff member when it comes to mechanics. Scary, I know and a sad statement on education in our province. Haha. However, we've just finished the 4-stroke process and I've been using my little buggy to explain induction systems. The kids love it and of course are always trying to get me to go into boost on the road in front of our shop. A quick way to lose my job. 😆
I had the car up on the drive-on as I had been smelling exhaust in the cabin. My downpipe was a touch loose and one stud was missing. I replaced it with a M8x 1.25 bolt and lock washer instead of a stud and nut. I also picked up a stud and nut too incase the bolt decides to back out. The irony of it all: you want a bolt/stud to come out and it will resist or break. You want it to stay in and it wants to come out.
Picture not included in this copy
I drained the catch can today. I would say that I have run two to three full tanks of 93 through the car since I last checked the catch can. There wasn't much in the can, maybe 3 - 4 mL, but it's pretty stinky. LOL. I thought I detected a green tinge and for a second I panicked, thinking that I had coolant in there. I quickly recalled that Toyota coolant is pink. Just to be safe, I checked the coolant and it's pink and crystal clear. Checked the oil too and it's super clean and still clear with probably 2000 - 3000 kms on it. I was across the border gassing up with 93 again today and picked up another 2 jugs of SuperTech Full Syn. Great Rollback at $14.39 a jug. I'll do another oil change soon. Sadly, in about another month, my baby will have to be tucked away for winter. I'm having so much fun blasting about.
Contents of catch can. Sure glad that wasn't atomized and sent back into the cylinders.
Picture not included in this copy
I'm teaching the Internal Combustion Engines 110 at our school this semester. Unbeliveably, I am the most knowledgeable staff member when it comes to mechanics. Scary, I know and a sad statement on education in our province. Haha. However, we've just finished the 4-stroke process and I've been using my little buggy to explain induction systems. The kids love it and of course are always trying to get me to go into boost on the road in front of our shop. A quick way to lose my job. 😆
I had the car up on the drive-on as I had been smelling exhaust in the cabin. My downpipe was a touch loose and one stud was missing. I replaced it with a M8x 1.25 bolt and lock washer instead of a stud and nut. I also picked up a stud and nut too incase the bolt decides to back out. The irony of it all: you want a bolt/stud to come out and it will resist or break. You want it to stay in and it wants to come out.
Picture not included in this copy
Yeah, one of those good ol' over-engineered masterpieces that Toyota was once famous for 😁 I probably won't push more than 250hp, at least until I get an LSD in there (and a 6-speed transmission as well, why not?)Originally Posted by 06YarisRS ↑Very exciting. Will definitely be following this.
I did some reading on the 4A-GZE engine you have. Man, I would love one of those! Stock ready for 300HP! I can't wait to hear what you will ultimately be doing for forced induction and management on this car. This will be the bomb, for sure! 👏
It is pretty old-school though, with dual wasted-spark igniters for the ignition, and no VVT-i 😲 I'm most likely going to modernize it a bit with a DBW conversion, as well as coilpacks for the ignition. Not to mention full E85 support, as we can easily get this magical juice here.
Haha, wouldn't "old school" make it easier from a modification standpoint? This car is going to be legendary. 250hp with a 6-speed and LSD will be outstanding. Even with my relatively low power output, I would seriously benefit from an LSD. When Tom first put his car up for sale, I really should have considered finding a way to acquire his trans - or his whole car and using parts from it for a conversion to manual. Missed opportunities!Originally Posted by eTiMaGo ↑Yeah, one of those good ol' over-engineered masterpieces that Toyota was once famous for 😁 I probably won't push more than 250hp, at least until I get an LSD in there (and a 6-speed transmission as well, why not?)
It is pretty old-school though, with dual wasted-spark igniters for the ignition, and no VVT-i 😲 I'm most likely going to modernize it a bit with a DBW conversion, as well as coilpacks for the ignition. Not to mention full E85 support, as we can easily get this magical juice here.
I have basically no knowledge about E85 other than its resistance to knock in high compression situations.
Old-school is easier, sure, less variables to tune. But that also means less chances to improve power at both low and high-ends...
The 6-speed and LSD are more of a long-term wish. I'd really want the 6th gear for cruising at lower RPM. Due to the very tight packaging in the engine bay, I may not be able to fit the slightly larger transmission.
E85 behaves like very high-octane race fuel, in a nutshell. Increased detonation resistance is the main advantage, you can dial up the boost and ignition quite a lot.
I also personally like that it is locally-produced, so there is less pollution related to transporting crude oil, and it also burns cleaner than dino soup.
But it has some drawbacks:
1) 30% lower energy by volume. So you basically need to flow 30% more fuel for the same power output. Injectors and fuel pumps need to be sized accordingly (I'm looking at 1000cc injectors to have a bit of headroom), and a tank will not take you as far as regular gasoline.
2) Ethanol is hygroscopic (it slowly absorbs moisture). So, if you don't drive very often, youu may need to get your tank emptied and refilled. (Also a nasty side effect, the moisture eventually ends up in your oil, so more frequent changes are recommended)
3) Cost. In some countries, E85 is WAY cheaper than gasoline. Over here, it's only about 30% less than premium, so at the end of the day, your cost/mile is about the same
Anyway as you might tell, I am quite a proponent of the stuff 😁
A nice little primer for the stuff:
https://www.youtube.com/watch?v=ltWcgiCm4NY
The 6-speed and LSD are more of a long-term wish. I'd really want the 6th gear for cruising at lower RPM. Due to the very tight packaging in the engine bay, I may not be able to fit the slightly larger transmission.
E85 behaves like very high-octane race fuel, in a nutshell. Increased detonation resistance is the main advantage, you can dial up the boost and ignition quite a lot.
I also personally like that it is locally-produced, so there is less pollution related to transporting crude oil, and it also burns cleaner than dino soup.
But it has some drawbacks:
1) 30% lower energy by volume. So you basically need to flow 30% more fuel for the same power output. Injectors and fuel pumps need to be sized accordingly (I'm looking at 1000cc injectors to have a bit of headroom), and a tank will not take you as far as regular gasoline.
2) Ethanol is hygroscopic (it slowly absorbs moisture). So, if you don't drive very often, youu may need to get your tank emptied and refilled. (Also a nasty side effect, the moisture eventually ends up in your oil, so more frequent changes are recommended)
3) Cost. In some countries, E85 is WAY cheaper than gasoline. Over here, it's only about 30% less than premium, so at the end of the day, your cost/mile is about the same
Anyway as you might tell, I am quite a proponent of the stuff 😁
A nice little primer for the stuff:
https://www.youtube.com/watch?v=ltWcgiCm4NY
Thanks! I love Mighty Car Mods. I did a bit of reading since my last post. I can definitely see why you'd be attracted to E85.Originally Posted by eTiMaGo ↑Old-school is easier, sure, less variables to tune. But that also means less chances to improve power at both low and high-ends...
The 6-speed and LSD are more of a long-term wish. I'd really want the 6th gear for cruising at lower RPM. Due to the very tight packaging in the engine bay, I may not be able to fit the slightly larger transmission.
E85 behaves like very high-octane race fuel, in a nutshell. Increased detonation resistance is the main advantage, you can dial up the boost and ignition quite a lot.
I also personally like that it is locally-produced, so there is less pollution related to transporting crude oil, and it also burns cleaner than dino soup.
But it has some drawbacks:
1) 30% lower energy by volume. So you basically need to flow 30% more fuel for the same power output. Injectors and fuel pumps need to be sized accordingly (I'm looking at 1000cc injectors to have a bit of headroom), and a tank will not take you as far as regular gasoline.
2) Ethanol is hygroscopic (it slowly absorbs moisture). So, if you don't drive very often, youu may need to get your tank emptied and refilled. (Also a nasty side effect, the moisture eventually ends up in your oil, so more frequent changes are recommended)
3) Cost. In some countries, E85 is WAY cheaper than gasoline. Over here, it's only about 30% less than premium, so at the end of the day, your cost/mile is about the same
Anyway as you might tell, I am quite a proponent of the stuff 😁
A nice little primer for the stuff:
https://www.youtube.com/watch?v=ltWcgiCm4NY
So, right now I'm running 93 octane and I'm getting intake temps around 60 - 80F and running about 14.5 AFR up to 3 - 4 pounds boost (ECU in closed loop). I only get AFR enrichment if I go pretty close to WOT. This is a drawback of the FIC. Do you think I'm ok at those temps? I do worry a bit due to the relatively high static compression of the engine, 10:1, I think. I know there are many variables and it would be difficult to really know for sure.
Turbokits.com apparently had mixed results with the 02 spoofing, tricking the computer into targeting a richer AFR during closed loop operations. I haven't started experimenting with this but may in the near future. I really should have listened to the first tuner who I spoke with and who definitely recommended standalone management.
Oof, I'm not sure I'm knowledgeable enough to answer you there... From what I gather, with premium fuel and not such a huge amount of boost, you should be OK... You have the advantage of not living in the hot, humid tropics too :D Does your engine have a knock sensor? If so, there should already be some mitigation built-in.Originally Posted by 06YarisRS ↑Thanks! I love Mighty Car Mods. I did a bit of reading since my last post. I can definitely see why you'd be attracted to E85.
So, right now I'm running 93 octane and I'm getting intake temps around 60 - 80F and running about 14.5 AFR up to 3 - 4 pounds boost (ECU in closed loop). I only get AFR enrichment if I go pretty close to WOT. This is a drawback of the FIC. Do you think I'm ok at those temps? I do worry a bit due to the relatively high static compression of the engine, 10:1, I think. I know there are many variables and it would be difficult to really know for sure.
Turbokits.com apparently had mixed results with the 02 spoofing, tricking the computer into targeting a richer AFR during closed loop operations. I haven't started experimenting with this but may in the near future. I really should have listened to the first tuner who I spoke with and who definitely recommended standalone management.
Milk run tonight...
Here's a terrible quality video. I'll make a better one in the daytime. Max boost reached was ~5.5, so gotta get at the wastegate, plus lean up my AFRs at WOT. It is definitely a "safe" tune at WOT at around 10.5:1, so that could probably be leaned out a touch, like around 11.5, but I'll leave it as is for now, at least until I up my boost.
Anyway, it pulls hard and puts you back in your seat a bit. If I do mange to get up to 7 - 8 psi, it will be scary. Even now, I can't go WOT until about 30 - 40 km/h or the wheels will spin. It breaks loose in the video at around 50 km/h even if I ease into the throttle.
There's definitely more room for improvement, but it's a blast right now as it is. No WRX killer for sure, but if I get to my boost goal, I bet I would at least not totally embarrass myself.
https://www.youtube.com/watch?v=31SC...OId1fR8gZcZNvs
Here's a terrible quality video. I'll make a better one in the daytime. Max boost reached was ~5.5, so gotta get at the wastegate, plus lean up my AFRs at WOT. It is definitely a "safe" tune at WOT at around 10.5:1, so that could probably be leaned out a touch, like around 11.5, but I'll leave it as is for now, at least until I up my boost.
Anyway, it pulls hard and puts you back in your seat a bit. If I do mange to get up to 7 - 8 psi, it will be scary. Even now, I can't go WOT until about 30 - 40 km/h or the wheels will spin. It breaks loose in the video at around 50 km/h even if I ease into the throttle.
There's definitely more room for improvement, but it's a blast right now as it is. No WRX killer for sure, but if I get to my boost goal, I bet I would at least not totally embarrass myself.
https://www.youtube.com/watch?v=31SC...OId1fR8gZcZNvs
Yes, there are many variables to consider and every car, and every engine is different. I'm pretty sure I'm safe with 93 octane, low boost and cool charge temps. I rarely have to enter boost under normal driving conditions. I can easily sail up a long highway hill at 130 - 140km/h while still in vacuum. When I want full boost (which is now 6 - 6.5 after adjusting the wastegate eariler today) I go WOT and my mixtures are good and rich. My car does have a knock sensor, as far as I know.Originally Posted by eTiMaGo ↑Oof, I'm not sure I'm knowledgeable enough to answer you there... From what I gather, with premium fuel and not such a huge amount of boost, you should be OK... You have the advantage of not living in the hot, humid tropics too :D Does your engine have a knock sensor? If so, there should already be some mitigation built-in.
Adjusted wastegate yesterday. I gave the arm 2 turns. Boost is now steady 6 - 6.5 psi. At one point coming off a ramp on to the highway, I hit 7 psi. I'm going to give the wastegate another turn tomorrow. If I reach 7 - 7.5 psi, I will stop there. Soon I will do another video, but in the day this time since the night one turned out so crappy.
8 psi!
I adjusted the wastegate again about two days ago and hadn't driven the car until today. There is a significant difference between 6 and 8 psi. Although the car pulled hard at 6, it's absolutely insane at 8 psi. Torque steer is becoming more apparent, but the car is easily controllable with a good drip on the wheel. Truthfully, I don't think I really understood how much of a difference preloading the wastegate could make. When I clocked the turbo, I had to remove the actuator, actuator arm extension and the actuator bracket. When I put it all back together, I don't think that I had shortened the arm to the preset length. I was a bit long. This was causing the wastegate to open quite a bit around 5 psi.
I'm definitely looking more seriously at performance tires. I think I will go with either a 195/55R15 or might press it a bit and go for a 205/50/15. I've been doing a lot of reading and although 205 is well out of spec for a 5.5" rim, a lot of guys have been using this size tire with that rim width. Some day I'll buy new wheels for the car as much as I'd hate to change the stock look. I have been pushing the 195s I have on the car quite a bit harder than my normal driving and I'm not noticing any performance issues, no sidewall roll or the like and that's with about the cheapest tires you could buy in that size. A performance tire with a stiffer side wall might allow me to go with the wider 205 tires. I also think that would enhance the look of the car significantly.
I'm still mulling over which performance brake pads to buy. The Hawks are currently at the top of my list. Also exploring the rotor options available for the car. I'm open to any opinions regarding rotors, slotted, slotted/drilled, drilled, blank and midrange pricing.
I adjusted the wastegate again about two days ago and hadn't driven the car until today. There is a significant difference between 6 and 8 psi. Although the car pulled hard at 6, it's absolutely insane at 8 psi. Torque steer is becoming more apparent, but the car is easily controllable with a good drip on the wheel. Truthfully, I don't think I really understood how much of a difference preloading the wastegate could make. When I clocked the turbo, I had to remove the actuator, actuator arm extension and the actuator bracket. When I put it all back together, I don't think that I had shortened the arm to the preset length. I was a bit long. This was causing the wastegate to open quite a bit around 5 psi.
I'm definitely looking more seriously at performance tires. I think I will go with either a 195/55R15 or might press it a bit and go for a 205/50/15. I've been doing a lot of reading and although 205 is well out of spec for a 5.5" rim, a lot of guys have been using this size tire with that rim width. Some day I'll buy new wheels for the car as much as I'd hate to change the stock look. I have been pushing the 195s I have on the car quite a bit harder than my normal driving and I'm not noticing any performance issues, no sidewall roll or the like and that's with about the cheapest tires you could buy in that size. A performance tire with a stiffer side wall might allow me to go with the wider 205 tires. I also think that would enhance the look of the car significantly.
I'm still mulling over which performance brake pads to buy. The Hawks are currently at the top of my list. Also exploring the rotor options available for the car. I'm open to any opinions regarding rotors, slotted, slotted/drilled, drilled, blank and midrange pricing.
More awesome news!!
Just be aware though, high performance summer tires lose grip at low temperatures, making them really unsafe. I haven't looked at high performance all seasons yet but that's a possibility.
Just be aware though, high performance summer tires lose grip at low temperatures, making them really unsafe. I haven't looked at high performance all seasons yet but that's a possibility.
Ok, so now that you're used to 8 PSI when is the built motor going in and getting fed 30 psi?
😳
Seriously though, congrats...that's awesome that you're now beyond the limits of your tires and brakes now.
😳
Seriously though, congrats...that's awesome that you're now beyond the limits of your tires and brakes now.
I hadn't thought about that, Sam. Where I live it's always cooler than the surrounding areas as we're on the ocean. I also do a lot of driving in the fall, right up until the first snowfall. Maybe I really ought to be looking at performance all-season tire. Truthfully, I'm finding the current tires quite satisfactory but I'm really not pushing them to their limits. I'd be appreciative if you could make a suggestion of a brand of performance all- season tires that you feel would be good for all around handling, but that might be slightly more capable than a typical inexpensive tire. This of course, if you do investigate them for yourself. I did have a look at the Toyo Proxes TR1 tires in the 195/45R15 size. They look nice and can be had for a very good priceOriginally Posted by CrankyOldMan ↑More awesome news!!
Just be aware though, high performance summer tires lose grip at low temperatures, making them really unsafe. I haven't looked at high performance all seasons yet but that's a possibility.
Haha, my thoughts exactly about an engine build! Not likely to happen anytime soon, but not out of the question either. Of course, then I'd definitely have to do something about my other drivetrain components.Originally Posted by Leegamer ↑Ok, so now that you're used to 8 PSI when is the built motor going in and getting fed 30 psi?
😳
Seriously though, congrats...that's awesome that you're now beyond the limits of your tires and brakes now.
With respect to being beyond the limits of my tires and brakes, the stock setup is quite acceptable, but the quick acceleration is making me want to push the car always harder on the windy roads around here. I just feel that before long, I am going to reach their limits. I'm not exactly sure where those limits are, but I know that I want to exceed them. 😆
Extra Plugs
I picked up two sets of SC20HR11 plugs. I scored them for ~$13.00 a set. Since the SC16HR11 plugs are the OEM plug, I'm gonna just call the 20s 'one step colder', gap them to 0.28 and use them. I hope to pull my current plugs this week and have a look at them. They've been in the car for probably 8 - 10 thousand kms as I replaced them before I did the engine swap. They probably have 1000 -1500 kms on them since the turbo install.
Picture not included in this copy
I picked up two sets of SC20HR11 plugs. I scored them for ~$13.00 a set. Since the SC16HR11 plugs are the OEM plug, I'm gonna just call the 20s 'one step colder', gap them to 0.28 and use them. I hope to pull my current plugs this week and have a look at them. They've been in the car for probably 8 - 10 thousand kms as I replaced them before I did the engine swap. They probably have 1000 -1500 kms on them since the turbo install.
Picture not included in this copy
for your climate and how long you drive the car into the fall season I would recommend Continental Extreme Contact DWS. They are not the most performance oriented but it will allow you to get as much use out of them in a single year than any other performance oriented tire. FWIW the BFG sport comp 2's I have allegedly do well in cold temps as long as it isn't ice. I have never and will never test this out however. BFG does sell an a/s version of the sport comp 2's that are meant as a performance all season. They would be a competitor to the Conti's and both tires have great reviews.Originally Posted by 06YarisRS ↑I hadn't thought about that, Sam. Where I live it's always cooler than the surrounding areas as we're on the ocean. I also do a lot of driving in the fall, right up until the first snowfall. Maybe I really ought to be looking at performance all-season tire. Truthfully, I'm finding the current tires quite satisfactory but I'm really not pushing them to their limits. I'd be appreciative if you could make a suggestion of a brand of performance all- season tires that you feel would be good for all around handling, but that might be slightly more capable than a typical inexpensive tire. This of course, if you do investigate them for yourself. I did have a look at the Toyo Proxes TR1 tires in the 195/45R15 size. They look nice and can be had for a very good price
A tire like the TR1 is likely more tire then you need or could really take advantage of at this point based on what you have said so far. It also won't let you drive your car as much throughout the year. A slightly less sticky tire will typically squeal earlier letting you know when you are close to its limits where as a more performance oriented tire squeal happens when you are virtually at the end of the limit and sometimes it is too late to catch if you are not experienced enough to catch it before it is too late.
Excellent info, Trevor. Yeah, I'm definitely looking for a balance of handling and ride quality. I don't think I need an extreme handling tire. The BFG Sport Com 2s do seem to come in a 15" size. Also seems to be the case for the Contis.Originally Posted by tmontague ↑for your climate and how long you drive the car into the fall season I would recommend Continental Extreme Contact DWS. They are not the most performance oriented but it will allow you to get as much use out of them in a single year than any other performance oriented tire. FWIW the BFG sport comp 2's I have allegedly do well in cold temps as long as it isn't ice. I have never and will never test this out however. BFG does sell an a/s version of the sport comp 2's that are meant as a performance all season. They would be a competitor to the Conti's and both tires have great reviews.
A tire like the TR1 is likely more tire then you need or could really take advantage of at this point based on what you have said so far. It also won't let you drive your car as much throughout the year. A slightly less sticky tire will typically squeal earlier letting you know when you are close to its limits where as a more performance oriented tire squeal happens when you are virtually at the end of the limit and sometimes it is too late to catch if you are not experienced enough to catch it before it is too late.
What are your thoughts on these tires? Nankang NS-25 All Season UHP in 205/55R15
https://www.ebay.com/itm/4-New-Nanka...5308e659d21418
Here is some feedback on the tires:
https://simpletire.com/Reviews/items...all-season-uhp
Street Tuning
Well, more like highway tuning. I had been noticing that my AFRs were starting to lean out slightly under hard acceleration on the highway from about 100 km/h up. The car would start to lean to ~ 12.8:1 - 13.00:1 and then it would drop to 11.5 as WOT continued. Last night I brought my laptop on our short trip. My son had it on his lap and I had him tweak the fuel cells by adding fuel in the lean areas. We spent about 20 minutes under different WOT speeds and smoothed the map out. There's still a bit to do, but the leanest we saw under full throttle through the rev range was 12.0:1. He really enjoyed doing this. I was proud of my little man.
Well, more like highway tuning. I had been noticing that my AFRs were starting to lean out slightly under hard acceleration on the highway from about 100 km/h up. The car would start to lean to ~ 12.8:1 - 13.00:1 and then it would drop to 11.5 as WOT continued. Last night I brought my laptop on our short trip. My son had it on his lap and I had him tweak the fuel cells by adding fuel in the lean areas. We spent about 20 minutes under different WOT speeds and smoothed the map out. There's still a bit to do, but the leanest we saw under full throttle through the rev range was 12.0:1. He really enjoyed doing this. I was proud of my little man.
Nice!Originally Posted by 06YarisRS ↑Street Tuning
Well, more like highway tuning. I had been noticing that my AFRs were starting to lean out slightly under hard acceleration on the highway from about 100 km/h up. The car would start to lean to ~ 12.8:1 - 13.00:1 and then it would drop to 11.5 as WOT continued. Last night I brought my laptop on our short trip. My son had it on his lap and I had him tweak the fuel cells by adding fuel in the lean areas. We spent about 20 minutes under different WOT speeds and smoothed the map out. There's still a bit to do, but the leanest we saw under full throttle through the rev range was 12.0:1. He really enjoyed doing this. I was proud of my little man.
That's cool! Father-Son bonding FTW
Yeah, gents, he really enjoyed it. I had colleague/buddy who's also a car enthusiast lined up to help me tune. I thought I'd see if my 10 year old wanted to give it a try and he jumped at the opportunity. It also helped that it involves a computer as he's majorly into those too.
Show him some PFI Tuning videos on youtube, maybe he'll be the next big tuner! lolOriginally Posted by 06YarisRS ↑Yeah, gents, he really enjoyed it. I had colleague/buddy who's also a car enthusiast lined up to help me tune. I thought I'd see if my 10 year old wanted to give it a try and he jumped at the opportunity. It also helped that it involves a computer as he's majorly into those too.
I definitely will. You've got me intrigued too. 🎉Originally Posted by Leegamer ↑Show him some PFI Tuning videos on youtube, maybe he'll be the next big tuner! lol
Merging onto the highway. Had a great time with the car today. I'm thinking I'll order a gopro or similar camera so I can actually make a decent video.
https://m.youtube.com/watch?v=80WPr7khL9k
https://m.youtube.com/watch?v=80WPr7khL9k
Seems like she goes well!
It does. It's more impressive in the car than on the video. Just for fun, I decided to try a similar pull - around 40 - 160 in my stock 2008 Yaris. I decided to let off at around 150 because it was taking so long. Lol. The turbo really pulls right up to 160 and would definitely keep going if I wasn't such a wimp. I'm close to redline at 160 with the pedal matted, but it goes into overdrive if I ease off slightly and drops to about 4000 rpm. Some day, I'll bring it up closer to 6000 rpm in OD. Pretty sure it would very easily bury the speedo.Originally Posted by ern-diz ↑Seems like she goes well!
at first I thought you meant 160 MPH, then I remembered you're in Canada. 👍Originally Posted by 06YarisRS ↑It does. It's more impressive in the car than on the video. Just for fun, I decided to try a similar pull - around 40 - 160 in my stock 2008 Yaris. I decided to let off at around 150 because it was taking so long. Lol. The turbo really pulls right up to 160 and would definitely keep going if I wasn't such a wimp. I'm close to redline at 160 with the pedal matted, but it goes into overdrive if I ease off slightly and drops to about 4000 rpm. Some day, I'll bring it up closer to 6000 rpm in OD. Pretty sure it would very easily bury the speedo.
Yeah, the good old metric system. 160 mph in a Yaris would be quite an experience. Didn't Team Tiamat(?) hit something like 155 mph in their sedan?Originally Posted by Leegamer ↑at first I thought you meant 160 MPH, then I remembered you're in Canada. 👍
Weird... I don't see my post when I'm on the computer, but I can see it when I'm on my phone...
I said that they should do an engine swap then turbo it... then it will spank that Mira...
I said that they should do an engine swap then turbo it... then it will spank that Mira...
Yeah, I think there is something weird going on as I'm pretty sure I replied to this yesterday. Anyway, I will check out the video soon.Originally Posted by Neinris ↑Weird... I don't see my post when I'm on the computer, but I can see it when I'm on my phone...
I said that they should do an engine swap then turbo it... then it will spank that Mira...
Got an HD Camera!
I picked up a used Ion Air Pro camera. It does ok, but I may invest in a better camera, capable of better quality/resolution.
The car is getting put away for winter in the next few days, but I've been tooting around in it as the roads are still salt free. Plus, the cold weather is awesome for intake temps. Still at 7 psi as I have yet to tweak the wastegate again. I'm actually considering leaving it where it is as it's just nasty and spins the wheels. Check out 1:46 in the video. It breaks loose at 80 km/h, spins to 100km/h so I let off on the throttle.
A couple links for ya gents. Theatre mode is best. If I get a better camera I'd like to shoot full HD 1080 at 60 fps.
Quick walk around:
https://www.youtube.com/watch?v=6eJXEtcY0RQ
Out for a short spin:
https://www.youtube.com/watch?v=fFvwnmc09Qc
I picked up a used Ion Air Pro camera. It does ok, but I may invest in a better camera, capable of better quality/resolution.
The car is getting put away for winter in the next few days, but I've been tooting around in it as the roads are still salt free. Plus, the cold weather is awesome for intake temps. Still at 7 psi as I have yet to tweak the wastegate again. I'm actually considering leaving it where it is as it's just nasty and spins the wheels. Check out 1:46 in the video. It breaks loose at 80 km/h, spins to 100km/h so I let off on the throttle.
A couple links for ya gents. Theatre mode is best. If I get a better camera I'd like to shoot full HD 1080 at 60 fps.
Quick walk around:
https://www.youtube.com/watch?v=6eJXEtcY0RQ
Out for a short spin:
https://www.youtube.com/watch?v=fFvwnmc09Qc
So when's the lsd happening?!? LolOriginally Posted by 06YarisRS ↑...It breaks loose at 80 km/h, spins to 100km/h so I let off on the throttle....
Haha, yeah, it could sure use one. I guess it would make more sense to wait until I (assuming I do) go with a manual trans. That said, I am sure enjoying the auto and it's no showing any signs that it's uncomfortable. Sometimes at almost full throttle it can't seem to decide it should be in 3rd or 4th, but at full it works predictably, shifts smoothly and seemingly at the right time. If I want to do a pull at say, 90% throttle, I'll just autostick it from 3rd to 4th and it works great.Originally Posted by myfirstyota ↑So when's the lsd happening?!? Lol
Get in touch with ArmstrongRacing if you want parts for a gearbox build. He's in the process of liquidating the last of his stuff, you might be able to get a deal on some of it. Can't recall if he has a C50 LSD or not...Originally Posted by 06YarisRS ↑Haha, yeah, it could sure use one. I guess it would make more sense to wait until I (assuming I do) go with a manual trans.
Ah, I didn't know he had extra parts. I figured he would have only had the parts to build the 6-speed. Interesting.Originally Posted by CrankyOldMan ↑Get in touch with ArmstrongRacing if you want parts for a gearbox build. He's in the process of liquidating the last of his stuff, you might be able to get a deal on some of it. Can't recall if he has a C50 LSD or not...