Yarisworld Archive

2ZR Turbo Yaris

561 posts · 343,257 views · page 12 of 12

Replies continued

Neinris‘Murica! · Oct 13, 2022#553
Originally Posted by 06YarisRS ↑
Hey man! Thanks! Actually, they're about 1 cm from the bumper, although they look like they're touching. So far, no evidence of melting or heat damage. It's funny...about 70% of the exhaust comes out of the right tip. It can be quite warm after a boost, whereas the left side, you could keep your hand on it.
I'm guessing that the two mufflers' piping are not equal length from the Y and/or one's straighter than the other.
I wonder if you should install a flap in line which closes the right exhaust, until you hit higher RPM? I've seen it on BMWs and even Toyota Camry, where the straighter pipe exhaust has a flap that opens and closes depending on the RPM. I guess it's the remedy for "Back Pressure", but your turbo don't need that.
06YarisRSThread starterFredericton, New Brunswick, Canada · Oct 14, 2022#554
Originally Posted by Neinris ↑
I'm guessing that the two mufflers' piping are not equal length from the Y and/or one's straighter than the other.
I wonder if you should install a flap in line which closes the right exhaust, until you hit higher RPM? I've seen it on BMWs and even Toyota Camry, where the straighter pipe exhaust has a flap that opens and closes depending on the RPM. I guess it's the remedy for "Back Pressure", but your turbo don't need that.
Yes, you are correct in your description of the current configuration. It doesn't cause any issues that I am aware of, so I likely won't do anything more to it. Interesting info on the flap system. I plan to read on that a bit. Thanks!
mitch9521Red Deer, AB · Oct 14, 2022#555
That thing needs a manual swap, a C56 or C60 would do nicely
06YarisRSThread starterFredericton, New Brunswick, Canada · Oct 14, 2022#556
Originally Posted by mitch9521 ↑
That thing needs a manual swap, a C56 or C60 would do nicely
Couldn't agree more. I've been wanting a manual for a while. I just have to get more motivated to do all the necessary work. New ECU, wiring, master cylinder, pedals, mounts and on and on... Haha. The car is working great, but a manual would definitely be the icing on the cake.
DesircustomsOttawa, Ontario, Canada · Oct 30, 2022#557
Originally Posted by 06YarisRS ↑
Hey Jeff! Yeah, I keep picking away at my car. Got Llumar tint (5%) on the back windows and hatch. Will post a few pics soon. My car goes in in a couple weeks for another tune. I love the building. Tuning? Not so much. LOL.
Great to hear, looking forward to see how much hp after your next tune...
I'm still debating if I should get the ecumaster before I go dyno tune it. They charge 800$, don't want to go more than twice there; once for stock internal tune, 2nd time if if I ever decide to build a forged internal motor.
Still having issues with my tune, it was fine until I unplugged the battery last week, and now, none of .cal files seems to be running good.
Nonetheless I'm still going to keep this yaris project going, I've found another yaris rs, with no rust for 1100, two summers ago, and a c60 transmission from the scrap yard.
06YarisRSThread starterFredericton, New Brunswick, Canada · Jul 6, 2023#558
Originally Posted by Desircustoms ↑
Great to hear, looking forward to see how much hp after your next tune...
I'm still debating if I should get the ecumaster before I go dyno tune it. They charge 800$, don't want to go more than twice there; once for stock internal tune, 2nd time if if I ever decide to build a forged internal motor.
Still having issues with my tune, it was fine until I unplugged the battery last week, and now, none of .cal files seems to be running good.
Nonetheless I'm still going to keep this yaris project going, I've found another yaris rs, with no rust for 1100, two summers ago, and a c60 transmission from the scrap yard.
Looooong time no talk. How are things? Been enjoying my car this summer. More driving than wrenching. haha. I received my dongle a couple of days ago. It unlocks ECU Flash so that I can have my remote stock ECU tuning session with dynocenterpr. A buddy of mine from Instagram has been after me for a while to do this. He had his boosted xD stock ECU tuned and I guess it's great. He had all kinds of issues with the F/IC and had this guy tune it. Guess it runs like stock, but nice and rich in boost. He's running 9.5 psi and a friend of his 13 psi on the stock 2zr with zero issues apparently. Check out:
https://www.instagram.com/dynocenterpr/

Picture not included in this copy
DesircustomsOttawa, Ontario, Canada · Nov 2, 2023#559
Originally Posted by 06YarisRS ↑
Looooong time no talk. How are things? Been enjoying my car this summer. More driving than wrenching. haha. I received my dongle a couple of days ago. It unlocks ECU Flash so that I can have my remote stock ECU tuning session with dynocenterpr. A buddy of mine from Instagram has been after me for a while to do this. He had his boosted xD stock ECU tuned and I guess it's great. He had all kinds of issues with the F/IC and had this guy tune it. Guess it runs like stock, but nice and rich in boost. He's running 9.5 psi and a friend of his 13 psi on the stock 2zr with zero issues apparently. Check out:
https://www.instagram.com/dynocenterpr/

Picture not included in this copy
Great news, nice to hear from you. I've been busy, still daily driving the rusty turbo project, I'm overdue for a real tune, I might try them, it seems like the best solution! Let me know how the remote tuning session goes.
Neinris‘Murica! · Nov 14, 2023#560
Originally Posted by 06YarisRS ↑
Looooong time no talk. How are things? Been enjoying my car this summer. More driving than wrenching. haha. I received my dongle a couple of days ago. It unlocks ECU Flash so that I can have my remote stock ECU tuning session with dynocenterpr. A buddy of mine from Instagram has been after me for a while to do this. He had his boosted xD stock ECU tuned and I guess it's great. He had all kinds of issues with the F/IC and had this guy tune it. Guess it runs like stock, but nice and rich in boost. He's running 9.5 psi and a friend of his 13 psi on the stock 2zr with zero issues apparently. Check out:
https://www.instagram.com/dynocenterpr/

Picture not included in this copy
What is this dongle you speak of??! Please do tell... 🙂
opisulaEdosyb · Jan 4, 2024#561
How has your summer driving experience been with the turbo project, and are you considering the remote tuning session with dynocenterpr for your boosted xD? Also, for those intrigued, can you share more about the dongle and its role in unlocking ECU Flash for remote tuning sessions?