Yarisworld Archive

First US 2ZR-FE Yaris swap gains exposure

193 posts · 77,985 views · page 1 of 4

Replies 192

KTSTrinidad and Tobago · Nov 21, 2015#2
real nice. congrats to the team that completed the job.
I have one question,
"The car's builder, Tom Armstrong, of Armstrong Racing, said the swap was literally a plug and play affair"
I assume this means the motor goes in bolt for bolt, however what about the ecu and gearbox aspect? Does the 1nz gearbox bolt to the 2zr engine or is the 2zr gearbox required?
Again great job. I have been considering selling my s/c to do this swap and been trying to gather as much info as possible.
ArmstrongRacingThread starterSan Diego · Nov 21, 2015#3
Thanks for the support!

Because this project was a auto > manual trans conversion also, we used the Xd manual trans and axles. Ive heard from many sources that the 1nz and 2zr bell housings are compatible, but I wont have a final answer untill I source another 2zr for my personal car.

The ECU came from the Xd also.
LTHatchNewark NJ · Nov 22, 2015#4
Very nice! Any chance you can give us a full parts list for the swap?
KTSTrinidad and Tobago · Nov 22, 2015#5
Thanks armstrongRacing. Keep the info on the swap coming in.
asproToronto, Canada · Nov 22, 2015#6
That is awesome. Man, the yaris you used for the swap looks exactly like my car but with less doors.

If i can manage to cook my engine, i would so go for the 2zr swap.
tmontagueCaledonia Ont. · Nov 22, 2015#7
This is great. I'm curious as to all the parts needed to make it work. It'd be nice if you could just swap the engine and keep the transmission.

Are all of the connectors compatible? ie: the fuel injectors etc
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#8
Originally Posted by LTHatch ↑
Very nice! Any chance you can give us a full parts list for the swap?
Untill I know for sure if we can/cannot use the Yaris transmission, this list may need future modification. I have a spare Yaris trans already, Im currently attempting to source another 2zr for some r&d.

1) Salvaged 2zr-fe from scion Xd~$1500. This must be a complete engine with all accesories due to the updated drive belt system. Manifolds, harness.

2) Fuel injection hose from Xd. ~$60 (its longer), air conditioning compressor lines. ~$130 (compressor specific, but attatch to the lines in the car with no modifications).

3) Passenger side engine mount from Xd. ~$170

4) ECU from Scion Xd. ~$130 (depending on your car, you will need a immobilizer or non-immobilizer version....and if you have immobilizer keys will need to be registered).

5) Xd OEM airbox or intake with MAF sensor. ~$300 (updated style) and exhaust mid-pipe. ~$500-600 (larger diameter and correct cats).

6) Xd yaw rate sensor and wiring. ~$200 (A check engine light will be present due to the 2zr's traction control system)

So plan on roughly $2800 for parts, unless you buy a scion Xd as a donor vehicle.

When you power up the 2zr for the first time, you will get a check engine light. That code will point you to the wire change needed. ��
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#9
Originally Posted by tmontague ↑
Are all of the connectors compatible? ie: the fuel injectors etc
Yes, the 2zr engine harness plugs into the fuse box with no modification.
enviriCT · Nov 22, 2015#10
As I have reasonable certainty regardeing 1nz tranny bolting on the 2zr, I recall during our groupchats when the swap was done a few months back, if you do go the 2zr tranny route, the speedo is being read from the abs rather than the 1nz tranny's speed sensor also?
JimKellyfanthe good Carolina · Nov 22, 2015#11
That is expletive awesome. Great work !
In my driving styles and things I have done so far to my Yar, I would love to do this when I can afford to.
Again, great stuff and congrats.
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#12
Originally Posted by enviri ↑
As I have reasonable certainty regardeing 1nz tranny bolting on the 2zr.......... if you do go the 2zr tranny route, the speedo is being read from the abs rather than the 1nz tranny's speed sensor also?
This is correct. The 2zr trans has no speed sensor, the Xd gets speed input from the abs module. We had to run a wire from the abs module to the fuse box juction to get our speedo to work.

This step is not needed if the Yaris trans works, thats why I didnt add it to the list.
LTHatchNewark NJ · Nov 22, 2015#13
Thank you very much for the information, hows the acceleration with the 2zr(0-60)? You have quite a few videos on your youtube page, that's of the 2zr Yaris?
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#14
Originally Posted by LTHatch ↑
...hows the acceleration with the 2zr(0-60)?
....You have quite a few videos on your youtube page, that's of the 2zr Yaris?
The 2zr in stock form feels similar to my complete bolt-on 1nz...but when you need to climb a hill or overtake a car you dont have to downshift from 5th. The lightweight Yaris doesnt need a ton of power, and the 2zr with all of the bolt-ons gets up to ~148hp.

My ArmstrongRacing Yaris still has the 1nz, as I am restricted by SCCA/GTA class rules....untill I find another 2zr! ��
tmontagueCaledonia Ont. · Nov 22, 2015#15
I'm a bit confused regarding the immobilizer. My Yaris has an immobilizer, so I'd need a 2zr with an immobilizer for it to work? I'm assuming that you are talking about the keys that need to be reprogrammed for the 2zr immobilizer as they are originally for the 1nz ECU? Has anyone had their keys reprogrammed for another ECU and if so what is a rough cost look like?
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#16
The immobilizer function is a relationship between the car(yaris), the Ecm(Xd 2zr), and keys. I dont know if the Xd 2zr ecm can be programed to work with the yaris immobilizer module, or if a Xd module and keys are needed....that is all uncharted teritory as of now.

I work at the dealership and we normaly charge ~$100 to cut and program keys.
tmontagueCaledonia Ont. · Nov 22, 2015#17
I'm assuming that your Yaris has no immobilizer?

I figured that if some one had an immobilizer and wanted to swap to a 2zr than you'd just need to get the immobilizer 2zr, the matching ECU and then just reprogram the Yaris keys to match the new ECU.
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#18
Yes, my car has no (Toyota)immobilizer. I have an alarm and a secret kill switch.

To know for sure about the immobilizer, we need a 2zr swap to test this on.....and as of now there is only this one in the US. So the question is....

HOW CAN I MAKE THIS SWAP MORE APPEALING AND ACCESABLE TO EVERYONE?
tmontagueCaledonia Ont. · Nov 22, 2015#19
Pics for a diy would for sure help and as stated above an outline listing parts needed make it easier for sure.

I'd personally rather have a blitz s/c for my 1nz, but due to the crazy price the 2zr may be more realistic. I just wouldn't spend the cash unless I knew exactly if it would work and how to do it.

I'm sure others would be a bit more adventurous but as my DD I have to be somewhat careful what I do to my Yaris.

How's your swapped Yaris running?
RigaudRigaud, Quebec, Can. · Nov 22, 2015#20
Nice swap and very well done!!! Great to see someone out this way actually doing it.

But.........you can get more then 30 additional hp from the 1nz
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#21
Originally Posted by tmontague ↑
Pics for a diy would for sure help and as stated above an outline listing parts needed make it easier for sure.

I just wouldn't spend the cash unless I knew exactly if it would work and how to do it.

How's your swapped Yaris running?
Ive created a parts list with approximate prices in this tread. But I agree on pics and a diy, I can do that. The 2zr Yaris is running great, its getting an intake, pulley, and header soon!
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#22
Originally Posted by Rigaud ↑
But.........you can get more then 30 additional hp from the 1nz
....how much does that cost? And how is the reliability? ....all things we must consider.
RigaudRigaud, Quebec, Can. · Nov 22, 2015#23
Originally Posted by ArmstrongRacing ↑
....how much does that cost? And how is the reliability? ....all things we must consider.
It's not that bad considering just a donor engine would cost $2000 plus. The guy's from Puerto Rico have great reliable success all N/A no turbo and Dyno charts. Quite impressive and a hell of a lot less work

Don't get me wrong, I'm not putting down your swap because I think it's an awesome swap you guy's did. ;) You should be able and get 20-40 more hp if done right. I was and still am considering a 2ZZ-GE swap which is not hard to do mechanically. The wiring is another story however, not plug and play. I'm undecided whether to do more on my go-kart (Yaris) or start my Audi 2.7TT swap.
RigaudRigaud, Quebec, Can. · Nov 22, 2015#24
Originally Posted by ArmstrongRacing ↑
Ive created a parts list with approximate prices in this tread. But I agree on pics and a diy, I can do that. The 2zr Yaris is running great, its getting an intake, pulley, and header soon!
👍
invader166Langley, BC · Nov 22, 2015#25
Originally Posted by ArmstrongRacing ↑
HOW CAN I MAKE THIS SWAP MORE APPEALING AND ACCESABLE TO EVERYONE?
How about pitching this to Toyota. If it's really not that hard to do this engine swap, then why not have Toyota offer a Yaris with this engine from the factory!?

Call it the Yaris Type R or something...🤷
RigaudRigaud, Quebec, Can. · Nov 22, 2015#26
Originally Posted by invader166 ↑
How about pitching this to Toyota. If it's really not that hard to do this engine swap, then why not have Toyota offer a Yaris with this engine from the factory!?

Call it the Yaris Type R or something...🤷
They did, just not in North America.
invader166Langley, BC · Nov 22, 2015#27
Originally Posted by Rigaud ↑
They did, just not in North America.
Awe man!! We never get any of the good stuff...😢
ArmstrongRacingThread starterSan Diego · Nov 22, 2015#28
Originally Posted by Rigaud ↑
It's not that bad considering just a donor engine would cost $2000 plus. The guy's from Puerto Rico have great reliable success all N/A no turbo and Dyno charts. Quite impressive and a hell of a lot less work.
All of that sounds great, and is cool! But that is fine for those NOT looking for a legit, smog legal 50 state swap option. The 2zr has been battle tested in the Lotus for years, and you START with 128-136hp/126ftlbs depending on header choice!
enviriCT · Nov 23, 2015#29
donor engine for 2k plus? i see (in canada) a good amount of 2zr-fe for CA$1500 or less.
tmontagueCaledonia Ont. · Nov 23, 2015#30
ugh this makes it harder to keep convincing myself to save the money for a WRX street/track build down the road...
Focus_Sh1ftNew Jersey · Nov 23, 2015#31
Awesome. Major kudos for taking the leap and being the first to try this swap. 👍

I'm confused though - did the Yaris' transmission work out?

Also, any pics of the completed swap?
ern-dizCA all day · Nov 23, 2015#32
Super cool. Two thumbs up.
ArmstrongRacingThread starterSan Diego · Nov 23, 2015#33
Originally Posted by Focus_Sh1ft ↑
I'm confused though - did the Yaris' transmission work out?

Also, any pics of the completed swap?
Still working on getting another 2zr for r&d, ill let you guys know about the trans when I get there. I didnt take many pictures of the swap, sorry. The pictures on SubCompact is all Ive seen since.
Jason@SportsCarDebary, FL · Nov 23, 2015#34
Pretty cool project. If the 2ZR has as much potential as the 1NZ it should be really fast once you start tweaking on it. 👍
ArmstrongRacingThread starterSan Diego · Nov 23, 2015#35
Originally Posted by tmontague ↑
ugh this makes it harder to keep convincing myself to save the money for a WRX street/track build down the road...
Do NOT buy a Subaru with a EJ25. The reliability on those engines is terrible if you want to upgrade the turbo. Money pit for sure.
ArmstrongRacingThread starterSan Diego · Nov 23, 2015#36
Originally Posted by Jason@SportsCar ↑
Pretty cool project. If the 2ZR has as much potential as the 1NZ it should be really fast once you start tweaking on it. 👍
I agree, and being that the Lotus exige has a supercharged 2zr....we know there is an aftermarket for these engines already.
tmontagueCaledonia Ont. · Nov 23, 2015#37
Originally Posted by ArmstrongRacing ↑
Do NOT buy a Subaru with a EJ25. The reliability on those engines is terrible if you want to upgrade the turbo. Money pit for sure.
I'm looking into the 2011-2012 year as I love the body design when you pair them with aftermarket wheels and coilovers. They had the EJ255 engine. I'm well aware of the potential failure but I'm not looking to go much past 300hp. I'm coming from driving an NA Yaris so I'm looking for it to be my hobby car to upgrade suspensions, appearance and slight engine mod like up to a stage 2. To be used as a DD, autoX and track day car, not for any real serious racing.

The stock engine should be well able to handle that mild power, and if not, well just more time spent for me to learn how to rebuild an engine. I'm planning on having my Yaris for another decade at least so it gives me a DD when my hobby car is on a lift ;)
RigaudRigaud, Quebec, Can. · Nov 23, 2015#38
Originally Posted by tmontague ↑
I'm looking into the 2011-2012 year as I love the body design when you pair them with aftermarket wheels and coilovers. They had the EJ255 engine. I'm well aware of the potential failure but I'm not looking to go much past 300hp. I'm coming from driving an NA Yaris so I'm looking for it to be my hobby car to upgrade suspensions, appearance and slight engine mod like up to a stage 2. To be used as a DD, autoX and track day car, not for any real serious racing.

The stock engine should be well able to handle that mild power, and if not, well just more time spent for me to learn how to rebuild an engine. I'm planning on having my Yaris for another decade at least so it gives me a DD when my hobby car is on a lift ;)
2.5 especially after 2008 is like playing Russian Roulette........"stock". But the 2.5L was always problematic for head gaskets, piston slapping due to a short piston skirt, oil issues reaching the journals at the other extremity of the crank, etc...
tmontagueCaledonia Ont. · Nov 23, 2015#39
Ya they're not a Toyota that's for sure. I've been following a lot of the Subie forums for the past half year and most of the issues seemed to stem from heavily moded wrx's. The head gasket can happen even to the stock one's but as for the oil delivery issues it seems to happens when pushed passed red line for prolonged periods of time with added boost.

The only other option would be to spend a lot more money on a '14 model with a new 2.0 engine that is still too new to determine durability.

My budget may only allow for an '11 or '12 and then just pull the engine and work on it as needed. The way I see it is a headgasket job is cheap if you don't mind putting putting time in. And since i'll have my dependable Yaris to drive while the WRX is out of commision, it sort of a win win.

It's still a couple years away for me so a lot of time to learn/read more and see how the prices fair down the road.
CrankyOldManWest Michigan · Nov 23, 2015#40
Originally Posted by ArmstrongRacing ↑
Still working on getting another 2zr for r&d, ill let you guys know about the trans when I get there. I didnt take many pictures of the swap, sorry. The pictures on SubCompact is all Ive seen since.
From my conversations with RagnaCat (PR, 2ZR swap) about gearboxes, the drive shafts are different on the transmission side. I've got a few different stock differentials (minus ring gears) in my parts bins, and I know how to rebuild a C5x gearbox, so this wouldn't be an issue for me. If you want it to be plug and play, you really need an xD MT as a donor. As far as I can tell, the bell housings are compatible, assuming that the starters are in the same spot.
ArmstrongRacingThread starterSan Diego · Nov 24, 2015#41
From all of the images I looked through on the internet, and remembering the starter positions during the swap. I'd say the starters are in the same position. AGAIN, this is why Im getting another 2zr to test fit with my spare yaris trans and flyweel/clutch.
KTSTrinidad and Tobago · Nov 24, 2015#42
I was checking on act, spec and fidanza websites. From act I see that the 2zr and 1nz user the same pressure plate and clutch disc however the flywheel part numbers on spec website differ for the two; 1nz=st51a while 2zr=st16a. Therefore if the 1nz gearbox/tranny built to the 2zr all u may need is the 2zr flywheel for the drivetrain
ArmstrongRacingThread starterSan Diego · Nov 24, 2015#43
Originally Posted by KTS ↑
I was checking on act, spec and fidanza websites. From act I see that the 2zr and 1nz user the same pressure plate and clutch disc...., all u may need is the 2zr flywheel
I saw this too, this is why all I need to do is try bolting the 2zr and C5 together and then we have the answer !
KTSTrinidad and Tobago · Nov 25, 2015#44
I can't wait for the answer. Tomorrow I am going to look for a 2zr locally.
ArmstrongRacingThread starterSan Diego · Nov 30, 2015#45
I just heard there is someone making long-tube headers for the 2zr? Someone in Az?
ArmstrongRacingThread starterSan Diego · Nov 30, 2015#48
Thanks guys! ����
ilikericesavannah, ga · Dec 1, 2015#49
Oh man, I haven't visited YW in a while. Glad you finally posted this up. I remember talking to you about this and how there needs to be a new thread on this because RagnaCat had a huge build thread on MicroImage forum that is not lost in the ether.

One day this will happen to my yaris. Would be a 2zr supercharged to compete in the SMF class.... Would definently turn some heads
ArmstrongRacingThread starterSan Diego · Dec 3, 2015#50
I am moving next month, and once Im settled I will be researching an Xd to buy. I will then begin the swap process on my own car with lots of pictures for a proper diy.....I will be joining the SMF class also, but going the n/a route