I am having issues trying to find a Xd that is less than $5k.. I want to do this same swap but would prefer a donor rather than buying piece by piece. Seems like nobody totals out their Xd around here
First US 2ZR-FE Yaris swap gains exposure
193 posts · 77,985 views · page 2 of 4
Replies continued
Ive seen several here in California but they are owned by auctions....around $3000 for a totaled xd.....Id rather buy a used xd, swap what I need to the yaris, then slowly rebuild the xd and sell it.
Wouldn't a 2zrfe corolla swap also work? Maybe the mounts and exhaust is different from the XD but it would a lot easier to find donors.
Yes a corolla donor would work for the engine and ecm, if you want to go that route
What cable you have to change?
This particular paragraf in an article i read cought my attention:
Using a Toyota 1.8-litre ‘2ZR-FE’ engine force-fed by a Magnuson supercharger, the new Elise S develops 217bhp at 6800rpm – the same maximum power figure as the fizzy old ‘SC’. But it also produces much more torque than the last fast Elise: 184lb ft at 4600rpm, up from 156lb ft at 5000rpm. And this from a*car*that still weighs plenty less than a tonne, even with fluids on board.I can only imagine what kind of performance a Yaris can have with a supercharged 2ZR-FE...🤤
There are several wires that may need modification depending on your ecm/chassis. Stay tuned for a proper diy!Originally Posted by fredovvti ↑What cable you have to change?
The day has come, guys. Our dreams are becoming true!
Originally Posted by kustomrtr ↑The day has come, guys. Our dreams are becoming true!
Is this engine found in the corolla here in Australia?
Yes it is.Originally Posted by junorico24 ↑Is this engine found in the corolla here in Australia?
Ive never seen a 3zr in person, but it looks similar.Originally Posted by Sci ↑So maybe the 2L 3ZR-FE will fit too then? :)
Might be hard to get a manual one (at least here in Aus)
That looks almost exactly like the 2zr...it should work also!
Wouldn't the current Yaris trans mount up anyway..?
The question is what is the difference in weights and impact on front suspension as well as handling.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
The weight difference is negligible. I had the privilege of driving the 2ZR swapped Yaris of this thread during my CA trip this summer and was thoroughly impressed. The acceleration of it was better than that of my supercharged Yaris and easily on par with a 8-10 psi turbo Yaris. The handling was not degraded in the least.Originally Posted by fnkngrv ↑The question is what is the difference in weights and impact on front suspension as well as handling.
Sent from my XT1575 using Tapatalk
I was referring to the 3zr
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
What I think would be seriously cool would be a 2zr swap that is built running 15psi of boost
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
I believe the 1nz with the blitz supercharger is heavier than the 2zr.
Ah - Totally off topic for this thread. ~40 lbs heavier than the 2ZR for ~10 HP and ~13 ft lb torque increase. Would also not likely be a drop in replacement, as the 2ZR is.Originally Posted by fnkngrv ↑I was referring to the 3zr
Sent from my XT1575 using Tapatalk
Yeah that dude from Australia had mentioned it since the 2zr isn't available apparently in his neck of the woods
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
would there be a difference in installation between the this engine and the new 2zr-fAe?
I think wiring would be the only difference.Originally Posted by Frank the Tank ↑would there be a difference in installation between the this engine and the new 2zr-fAe?
I contacted the BAR recently to get the details on making this swap legal, so all of you guys understand just how easy this swap is...
They confirmed a 2zr swap is completely allowed into a Yaris within the same model years.
1.perform swap with all OE components
2.drive around for a while to confirm no check engine lights and emissions monitors set.
3.schedule appointment with state Referee for inspection.
...no need to change any 2zr ecm specs, its that easy!
They confirmed a 2zr swap is completely allowed into a Yaris within the same model years.
1.perform swap with all OE components
2.drive around for a while to confirm no check engine lights and emissions monitors set.
3.schedule appointment with state Referee for inspection.
...no need to change any 2zr ecm specs, its that easy!
Legal?
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
Yes, for those of us residing in emissions regulated states. Every 2 years in California we must pass a emissions test, if I showed up with a 2zr without a BAR certification label....automatic fail.Originally Posted by fnkngrv ↑Legal?
Forgot about that. Just another reason to not live in Cali.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
It's not a huge price to pay for great weather and endless opportunity! Haha. Back to the swap though, I am more than happy to jump through the legal hoops required to make our swaps 100% legitimate!
More power to you for sure. I hear ya on hoops. The stuff I have to go thru to race what I do is a trip too. Best of luck and if this all pans out the way the hopes are it should hopefully be a boon for the community.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
My intention for everyone interested is to compile the components needed for a swap, perform the work, and go though the procedure together to legalize. It should take about 2 days to complete the work, then I can assist the owners through the legal portion, and provide a warranty.
Sounds like you gave your ducks in a row.
Sent from my XT1575 using Tapatalk
Sent from my XT1575 using Tapatalk
I have a investor interested in loaning me $10,000 to get started.....but I need to know some of you guys are interested. Can I get a checkin on everyone interested?
What specific interest are you looking for? The thread has kind of wandered around of late. 👍Originally Posted by ArmstrongRacing ↑I have a investor interested in loaning me $10,000 to get started.....but I need to know some of you guys are interested. Can I get a checkin on everyone interested?
How many people are seriously interested in having a 2zr swap dealer? Should I write up a estimate with itemized costs including labor times, parts, fluids, warranty & legal stipulations, ect.?
Or are most of you just interested in the information from a diy?
...either way Im going to need to purchase another 2zr to test fit with a Yaris transmission. This requires me to spend a couple thousand dollars of my own money to help the entire community progress.
Or are most of you just interested in the information from a diy?
...either way Im going to need to purchase another 2zr to test fit with a Yaris transmission. This requires me to spend a couple thousand dollars of my own money to help the entire community progress.
I would be interested in the details of the swap, but just for my own curiosity. I have no interest in actually doing this on my own car.
I apologize for not having the swap information on hand. We had 4 days to do a 2zr AND an auto-to-manual trans swap, so we were going 100mph living on red bull and pizza. I was up past midnight more than once researching the 2 engines wiring diagrams to make the 2zr engine run without any check engine lights. We did have some pictures taken but that was of the swap already completed.
I will be honest. There are many Yaris owners out there, and a very small percentage are willing to put more than 2k worth of parts on their car to make it fast. I don't believe you will get enough interest as a dealer to do this swap for people. Most are going to have a hard time trying to justify $2k for 30whp.
I believe the people of Yarisworld want a DIY write up so they can do it in their own garage or local tuner and have a parts list they can start gathering up over time. This is thier Daily Driven car and probably can't be without it more than a weekend, so doing this swap in 2 days is a must.
I am one of those who will do the swap in my own garage, I am just curious about the which wires that needed to be swapped and the immobilizer issue being that my yaris is a 2010.
I believe the people of Yarisworld want a DIY write up so they can do it in their own garage or local tuner and have a parts list they can start gathering up over time. This is thier Daily Driven car and probably can't be without it more than a weekend, so doing this swap in 2 days is a must.
I am one of those who will do the swap in my own garage, I am just curious about the which wires that needed to be swapped and the immobilizer issue being that my yaris is a 2010.
I'm with Rice on this one. I'd love a DIY outlining parts needed and electrical issues that need to be dealt w/. If I ever decided to drop the cash to do this swap it would be because I found a good deal on the motor and I have the info to get it over in a weekend w/ no CEL's.
For someone in an emissions testing state, I would think there would be some demand (maybe 1-2 a year) for a properly vetted and compliant install. For the rest of us, I think there would be more interest in documentation of the install. I'm not sure there's much commercial viability in selling "plans" for the swap, since a single PDF on the net will all but kill any chance of controlling distribution.Originally Posted by ArmstrongRacing ↑How many people are seriously interested in having a 2zr swap dealer? Should I write up a estimate with itemized costs including labor times, parts, fluids, warranty & legal stipulations, ect.?
Or are most of you just interested in the information from a diy?
For a similar business model, there's a chap in the UK that does MR2 engine swaps. He offers everything from just the mounting brackets, up to a full turnkey solution from a donor vehicle/clip. It's not cheap, but there seems to be enough interest in it to keep him afloat for the last 10 years or so. Granted, the MR2 is a sports car with some pedigree, and a conservative swap nets you ~100 whp, so take it with a grain of salt.
It could also just be too early for the market--resale prices on the Yaris are still pretty strong, and the xD isn't readily available secondhand. When I look at the Autocross scene, most Honda Civic engine swaps are on cars that are 20+ years old. The original MR2 is 30+ years old, and people are still finding new engines to swap into it
If you can get the stars to align, you may be able to just pull them from a you-wrench-it yard and bolt them up on site--unless you're talking about the full engine bay install and not just the mating of the gearbox to the engine.Originally Posted by ArmstrongRacing ↑...either way Im going to need to purchase another 2zr to test fit with a Yaris transmission. This requires me to spend a couple thousand dollars of my own money to help the entire community progress.
Me want DIY!!! 🤘🤘
I'm extremely interested in seeing a DIY for this.
If (when?) my motor goes, I'd seriously consider tossing in a 2ZR and retrofitting my turbo setup to the new motor.
Hell, even if I find a good deal on a motor and the swap isn't too cost / labor intensive, I'd probably pull the trigger anyway.
If (when?) my motor goes, I'd seriously consider tossing in a 2ZR and retrofitting my turbo setup to the new motor.
Hell, even if I find a good deal on a motor and the swap isn't too cost / labor intensive, I'd probably pull the trigger anyway.
Thank you for the feedback.
I dont want to control the information, Ive already created a list of parts needed in the beginning of this discussion. What I want is to use my sponsors help to accumulate the parts needed, and if there is enough interest we can get a better deal...like a group buy. If there is no real interest, then we just move on and hope the next guy that does this swap tries using a Yaris transmission....because that is the only uncertainty as of now.
I dont want to control the information, Ive already created a list of parts needed in the beginning of this discussion. What I want is to use my sponsors help to accumulate the parts needed, and if there is enough interest we can get a better deal...like a group buy. If there is no real interest, then we just move on and hope the next guy that does this swap tries using a Yaris transmission....because that is the only uncertainty as of now.
I can't remember if this was already answered, but if the Yaris Trans doesn't work then does the 2zr Trans direct fit into a Yaris.
Optimally you'd just keep the stock Yaris Trans and just mount in the new engine. If the price is reasonable then this is something i'd like to do down the road.
Is the stock 2zr really a big gain in performance over the 1nz? I know the hp increase and tq is good but my question is how does it run as a stock engine? I'm trying to get a feel for how a stock 2zr runs compared to my modded NA 1nz. My 1nz is a lot of fun to drive now and I don't want to give that up just for some extra ponies
Optimally you'd just keep the stock Yaris Trans and just mount in the new engine. If the price is reasonable then this is something i'd like to do down the road.
Is the stock 2zr really a big gain in performance over the 1nz? I know the hp increase and tq is good but my question is how does it run as a stock engine? I'm trying to get a feel for how a stock 2zr runs compared to my modded NA 1nz. My 1nz is a lot of fun to drive now and I don't want to give that up just for some extra ponies
The 2zr trans works, its what we used.
Check out post #68, Scott mentioned how well the 2zr performed when he drove the swapped yaris. The gains in stock form are roughly 30hp and 20ftlbs.
Check out post #68, Scott mentioned how well the 2zr performed when he drove the swapped yaris. The gains in stock form are roughly 30hp and 20ftlbs.
So there is virtually no downfall to using the 2zr Trans other than a bit of extra work and cost. this looks like it would be an engine swap if all the mounts are the same and wiring is plug and play.
Where I live I wouldn't have to register the engine to pass an etest. As long as there are no CEL's then it's good to go as far as I know
Where I live I wouldn't have to register the engine to pass an etest. As long as there are no CEL's then it's good to go as far as I know
When using a 2zr manual transmission you need the xd ABS module and wiring too...because there is no speed sensor on that transmission. Possibly the axles as well, and I think the gear ratios are taller.
Remember now, the 2ZR is the same motor that is in the Yaris TS. So if you want to poke in that thread section for some questions answered, head there.Originally Posted by tmontague ↑I can't remember if this was already answered, but if the Yaris Trans doesn't work then does the 2zr Trans direct fit into a Yaris.
Optimally you'd just keep the stock Yaris Trans and just mount in the new engine. If the price is reasonable then this is something i'd like to do down the road.
Is the stock 2zr really a big gain in performance over the 1nz? I know the hp increase and tq is good but my question is how does it run as a stock engine? I'm trying to get a feel for how a stock 2zr runs compared to my modded NA 1nz. My 1nz is a lot of fun to drive now and I don't want to give that up just for some extra ponies
2012+ Yaris does not have a speed sensor on the trans either, pulls it from the ABS tone ring.Originally Posted by ArmstrongRacing ↑When using a 2zr manual transmission you need the xd ABS module and wiring too...because there is no speed sensor on that transmission. Possibly the axles as well, and I think the gear ratios are taller.
Oh thank you Jason, I didnt know that!
Yes, if you get the xD gearbox, you need the xD axles. RagNaCat discovered that the differential is the larger one that's similar to the other 1.8L family. Not sure if they're direct swap from a Corolla or Matrix on the axle side, but the Celica and Matrix final drive ring gears go on the xD diff (and not the Yaris/xA/xB).Originally Posted by ArmstrongRacing ↑When using a 2zr manual transmission you need the xd ABS module and wiring too...because there is no speed sensor on that transmission. Possibly the axles as well, and I think the gear ratios are taller.
The speedo sensor hole looks to be the same on all of the C-series gearboxes I've encountered. Looking at the parts diagrams for the xD, the speedo gear is still installed on the differential. If that's the case, you should be able to drop a standard speedo sensor in the hole and keep your Yaris ECU, assuming you have the differential-based speedo in the first place. My 09 has it, and all of the other C-series gearboxes I've torn apart use what appears to be the same part. Looking at the compatibility of the speedo sensor (83181-12020) it's used on lots of stuff: "TOYOTA: 14 models, 905 variants between 1991 and 2013."
The speedo hole was there on the 2012, just capped off, but I don't recall the plastic speedo driven gear being on the diff carrier.Originally Posted by CrankyOldMan ↑The speedo sensor hole looks to be the same on all of the C-series gearboxes I've encountered. Looking at the parts diagrams for the xD, the speedo gear is still installed on the differential. If that's the case, you should be able to drop a standard speedo sensor in the hole and keep your Yaris ECU, assuming you have the differential-based speedo in the first place. My 09 has it, and all of the other C-series gearboxes I've torn apart use what appears to be the same part. Looking at the compatibility of the speedo sensor (83181-12020) it's used on lots of stuff: "TOYOTA: 14 models, 905 variants between 1991 and 2013."