Yarisworld Archive

First US 2ZR-FE Yaris swap gains exposure

193 posts · 77,985 views · page 4 of 4

Replies continued

CrankyOldManWest Michigan · Jan 8, 2016#151
It's an automatic? So sad. =P

On a semi-related note, the engine harness ECU pinout for the xD is wildly different from the Yaris. Like, 99% incompatible. I haven't documented the smaller connector yet, but it will likely be different, too.

The actual component connectors, however, seem to be identical, if named/numbered differently. E.g. the engine bay wire harness ECU connector is C20 in the Yaris, but C19 in the xD.

Edit: just compared the connections on the 60-pin ECU side--about 90% incompatible. Both connectors are incompatible in possibly catastrophic ways for the ECU. Moral of the story: DON'T SWAP ECUs WITHOUT SWAPPING WIRE HARNESSES!
ArmstrongRacingThread starterSan Diego · Jan 8, 2016#152
Im a Tech at the dealership...

Yes it is a auto, because its my only car and Im not trying to teach my pregnant wife manual.....i have a 5spd on standby for when we have a second car.

We swap everything over from the Xd, EVERYTHING lol.

Regarding the diy...do I need to include pulling the 1nz? Or just the assembly and install of the 2zr?
Frank the TankToronto · Jan 9, 2016#153
Just a quick question regarding swaps since that's the subject here

Why doesn't anyone swap the 2zz into the yaris?

Edit: the more information the better
fredovvtiSabana Grande, PR · Jan 9, 2016#154
I think only assembly and install of the 2zr. There are manuals and videos in the web to how dessembly de 1nz.
Bluevitz-rsOshawa, Ontario, Canada · Jan 9, 2016#155
Originally Posted by Frank the Tank ↑
Just a quick question regarding swaps since that's the subject here

Why doesn't anyone swap the 2zz into the yaris?

Edit: the more information the better
It's not a "Bolt In" able swap. You'd need to do some major fabrication to get it to fit.
RigaudRigaud, Quebec, Can. · Jan 9, 2016#156
Originally Posted by Bluevitz-rs ↑
It's not a "Bolt In" able swap. You'd need to do some major fabrication to get it to fit.
That and it's NOT a plug and play for the ECU. Been done with success by some in Europe and Asia. Crazy motor but a big project for those who dare.
ArmstrongRacingThread starterSan Diego · Jan 9, 2016#157
Originally Posted by Bluevitz-rs ↑
It's not a "Bolt In" able swap. You'd need to do some major fabrication to get it to fit.
AND the fact that the 2zz is crazy expensive....I actually considered this swap before the 2zr untill I added up all the related costs. $2000+!
3cyltrboOttawa · Jan 9, 2016#158
Originally Posted by CrankyOldMan ↑
It's an automatic? So sad. =P

On a semi-related note, the engine harness ECU pinout for the xD is wildly different from the Yaris. Like, 99% incompatible. I haven't documented the smaller connector yet, but it will likely be different, too.

The actual component connectors, however, seem to be identical, if named/numbered differently. E.g. the engine bay wire harness ECU connector is C20 in the Yaris, but C19 in the xD.

Edit: just compared the connections on the 60-pin ECU side--about 90% incompatible. Both connectors are incompatible in possibly catastrophic ways for the ECU. Moral of the story: DON'T SWAP ECUs WITHOUT SWAPPING WIRE HARNESSES!
Huh?............maybe I was drunk with optimism, but I thought it was as simple (basically speaking) as

unplug and remove 1nz
plug and install 2zr

=enjoy 30whp+ gain

whats all this talk about the wiring being 99% incompatible ?????

🆘

🤷

😲
ArmstrongRacingThread starterSan Diego · Jan 10, 2016#159
@Crankyoldman was referring to using the 1nz harness on the 2zr. I never once suggested that, Ive said from the beginning to use everything from the 2zr. The 2zr engine harness plugs into the 2zr ecm on one end along with the chassis harness, and it plugs into the fuse box at the other end. Sinmple.
Dark PawJamaica · Jan 10, 2016#160
👀
Focus_Sh1ftNew Jersey · Jan 11, 2016#161
Focus on the swap and assembly, don't worry about a guide for pulling the motor.

Is the 2ZR ECU mounted in the engine bay in the XD? Regardless, is there a reasonable way to mount it in the engine bay in the Yaris?
ArmstrongRacingThread starterSan Diego · Jan 11, 2016#162
2zr ecm mounts in the exact same way as the 1nz ecm.
ArmstrongRacingThread starterSan Diego · Jan 11, 2016#163
1nz powertrain is out...

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Jan 11, 2016#164
void

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Jan 11, 2016#165
Insurance claim went through and Ill be receiving a check for a "recycled" engine soon......that recycled engine will be the 2zr....so standby guys. Im not rich so I will have to take from my savings and get help from friends to get this swap going.
ilikericesavannah, ga · Jan 12, 2016#166
It's like a Phoenix, rising from the ashes.. haha. From something bad happening comes something greater..

Good luck, can't wait to see this swap take action.
tmontagueCaledonia Ont. · Jan 12, 2016#167
nice boxer engine ;)

Looking forward to hearing more about the new build
ArmstrongRacingThread starterSan Diego · Jan 12, 2016#168
Question: when the 2zr gets here, where should I start the diy thread?
tmontagueCaledonia Ont. · Jan 12, 2016#169
I vote to place it in the performance area. People doing this are doing so due to increase in performance
ArmstrongRacingThread starterSan Diego · Jan 12, 2016#170
Originally Posted by tmontague ↑
I vote to place it in the performance area. People doing this are doing so due to increase in performance
I agree. The 2zr should be here tomorrow.
yarisugiハワイ · Jan 12, 2016#171
Q: Where does a member doing a 2ZR-FE swap into a Yaris start his DIY thread?

A: Anywhere he wants!
fnkngrvIn The Hotbox · Jan 13, 2016#172
Yup, I would start a thread called "2zr engine swap guide" under performance. This is purely for performance. I will be interesting to see over some time as well what the fuel economy would be for those really concerned about it.
ArmstrongRacingThread starterSan Diego · Jan 13, 2016#173
Thats a good point about fuel economy....I guess I could start a fuel consumption log.....but I'm telling you now, my first month with this engine will be lots of wot
fnkngrvIn The Hotbox · Jan 13, 2016#174
I am sure it will be. Having a fuel log however for many folks especially with an econobox like this will most likely be beneficial to having them buy off on doing the swap and possible future business. Believe it or not I have people ask me all the time what my fuel economy is with my setup and then tend to start making comments about the trade-off of bigger power vs fuel.

Sent from m-o-b-i-l-e
ArmstrongRacingThread starterSan Diego · Jan 13, 2016#175
Well my 07 yaris is rated at 34/40...
..a 11 Corolla is rated at 26/34...

If you simply average these numbers its 30/37.

My car is much lighter than average so the results may not be the same for others.
CrankyOldManWest Michigan · Jan 13, 2016#176
Originally Posted by ArmstrongRacing ↑
...but I'm telling you now, my first month with this engine will be lots of wot
This.
Originally Posted by ArmstrongRacing ↑
My car is much lighter than average so the results may not be the same for others.
How much is "much lighter"? =P

Here's the curb weight and fuel economy of the other 2ZR platforms compared to the Yaris:
2010 Yaris 2dr, 2311 lbs, 29/36 (MT)
2010 xD, 2624 lbs, 27/33 (MT)
2010 Corolla, 2723 lbs, 26/35 (MT)
2010 Vibe, 2856 lbs, 26/32 (MT)
2010 Matrix, 2865 lbs, 26/32 (MT)

For reference, my 2dr--with a Blitz, 1ZZ injectors, CAI, 1ZZ throttle body, 195/50R15 summer tires and stock exhaust--averages around 27 commuting on back roads, 25 highway, and 20 highway pulling my race trailer. Even if the 2ZR has 130 bhp compared to the estimated 140 bhp of the Blitz setup, not having to run open loop under any real engine load means significant fuel savings, plus it runs on 85 octane instead of premium (91-93).

As much as I love the sound of the Blitz and the weird looks it draws, the 2ZR seems like a MUCH better mod for a daily driver looking for more zoom. As such, I'm seriously contemplating doing the 2ZR in my daily and moving the S/C 1NZ to the aging MR2 plaything.
ArmstrongRacingThread starterSan Diego · Jan 13, 2016#177
At last years prosolo I rolled onto their scales and I was 2270.
CrankyOldManWest Michigan · Jan 13, 2016#178
Originally Posted by ArmstrongRacing ↑
At last years prosolo I rolled onto their scales and I was 2270.
With driver? If that's the case, I would be pushing 2700 (including fuel and the S/C).
ArmstrongRacingThread starterSan Diego · Jan 13, 2016#179
Without driver, 1gal of fuel.
ArmstrongRacingThread starterSan Diego · Jan 13, 2016#180
2zr just arrived!

1 attachment not included in this copy

xnamerxxso cal · Jan 13, 2016#181
Just for reference I was 2140 at the 2014 El Toro nationals.
CoryMWhite Rock BC · Jan 13, 2016#182
I'm trying to avoid the urge to be abusive to my 1NZ now. Because if it breaks, I may as well do a swap right? 😆

If someone found an available OE LSD trans that bolts in, I'd likely be in on this swap as well. Good luck as you go through the swap!
invader166Langley, BC · Jan 14, 2016#183
Originally Posted by CoryM ↑
I'm trying to avoid the urge to be abusive to my 1NZ now. Because if it breaks, I may as well do a swap right?
If you ever do, let me know, i'd love to stop by and see it. Maybe help out with a thing or two. 😉
7:34pmBritish Columbia · Jan 14, 2016#184
Originally Posted by CoryM ↑
I'm trying to avoid the urge to be abusive to my 1NZ now. Because if it breaks, I may as well do a swap right? 😆

If someone found an available OE LSD trans that bolts in, I'd likely be in on this swap as well. Good luck as you go through the swap!
Originally Posted by invader166 ↑
If you ever do, let me know, i'd love to stop by and see it. Maybe help out with a thing or two. 😉
If either of you ever do, also let me know 😁
fnkngrvIn The Hotbox · Jan 14, 2016#185
We will be working to get a car for our son in the next six months and honestly this would be a cool swap to do if I could get an 07-09 for a low enough price to add the swap into the note on it ;-). We should be living in the Dallas area by then and traffic moves much faster than here.

Sent from m-o-b-i-l-e
CrankyOldManWest Michigan · Jan 14, 2016#186
Armstrong--If you have a few spare hours and maybe $50, could you visit a local junk yard see if one of the old 1ZZ aluminum tube manifolds will bolt up to the 2ZR? I know the throttle body is wrong, I'm more interested in the flange bolt pattern. Pic related.

1 attachment not included in this copy

xnamerxxso cal · Jan 14, 2016#187
Originally Posted by CoryM ↑
I'm trying to avoid the urge to be abusive to my 1NZ now. Because if it breaks, I may as well do a swap right? 😆

If someone found an available OE LSD trans that bolts in, I'd likely be in on this swap as well. Good luck as you go through the swap!
The c56 transmission found in the MR2 should bolt up, but shift linkage would need to be modified. Those transmissions are quite rare and expensive though.
Bluevitz-rsOshawa, Ontario, Canada · Jan 14, 2016#188
Originally Posted by xnamerxx ↑
The c56 transmission found in the MR2 should bolt up, but shift linkage would need to be modified. Those transmissions are quite rare and expensive though.

I think they were in the 7th gen Celica as well.


Sent from my iPod Touch
ncp13Athens Greece · Jan 11, 2018#189
I just read the whole thread :)

Any news on the swap?

I am trying to find out if the C56 trans of my 2001 Yaris TS will accept the 2ZR family engine :)


BTW for anyone interested on factory LSD

Factory LSD for C56-C154 trans p/n 41301-12190 lists 630e + tax
ncp13Athens Greece · Jan 12, 2018#190
I have a 1nz block next to a 2zr block.

It looks like my c56 will mate to the 2zr 👍

Left block is a 1NZ .

1 attachment not included in this copy

ArmstrongRacingThread starterSan Diego · Feb 28, 2018#191
Originally Posted by ncp13 ↑
I have a 1nz block next to a 2zr block.

It looks like my c56 will mate to the 2zr 👍

Left block is a 1NZ .
The main differences in the transmissions for these engines was not the bolt pattern, its the starter location. Checkout my 6-speed swap tutorial
thebarberGrand Rapids, MI · Mar 1, 2018#192
my wife wants a 2zr yaris for her next DD....cranky...wanna help?
ArmstrongRacingThread starterSan Diego · Nov 7, 2018#193
#2