Yarisworld Archive

My 2011 Vitz

655 posts · 261,587 views · page 9 of 14

Replies continued

coheedMaiden, NC · Jun 22, 2015#401
This is looking so good man.
TerenceCruzThread starterCali · Jun 23, 2015#402
Originally Posted by coheed ↑
This is looking so good man.
Thanks a lot bro, one thing tho is that I'm definitely over the BBS mesh look.. Haha. Next wheels will be wider and 5 spoke probably!! That's not for a while though. Gona enjoy the car :) Just purchased a drop in intake filter, and i'll just stack until I find a good exhaust. I want an axleback, but I might need to do custom so I can ask for clearance since she's sitting pretty low.
coheedMaiden, NC · Jun 23, 2015#403
I'm running a 2" muffler delete/straight pipe on mine and I love it. Not too loud, doesn't drone at speed.
TerenceCruzThread starterCali · Jun 24, 2015#404
Originally Posted by coheed ↑
I'm running a 2" muffler delete/straight pipe on mine and I love it. Not too loud, doesn't drone at speed.
Really? So all you did was weld a pipe in place of the axle back correct? Sorry im kind of a noob when it comes to exhausts lol. Mind sending a video when you get the chance? :D i'm sure i wont have any clearance issues if I go that route.
TerenceCruzThread starterCali · Jun 25, 2015#405
New toy: UPGR8 High Flow drop in air filter. Read some good reviews about it online, and got it for an amazing price :) So, figured I'd give it a shot. Will be installing it tomorrow! I'll let you guys know how it is!

Picture not included in this copy
ern-dizCA all day · Jun 25, 2015#406
Originally Posted by TerenceCruz ↑
New toy: UPGR8 High Flow drop in air filter. Read some good reviews about it online, and got it for an amazing price :) So, figured I'd give it a shot. Will be installing it tomorrow! I'll let you guys know how it is!

Picture not included in this copy
Nice.

I got a K&N drop in, but was disappointed to see the built in mesh on the filter box, which I couldn't help but feel must reduce airflow regardless of filter used. 🤷
coheedMaiden, NC · Jun 25, 2015#407
Originally Posted by TerenceCruz ↑
Really? So all you did was weld a pipe in place of the axle back correct? Sorry im kind of a noob when it comes to exhausts lol. Mind sending a video when you get the chance? :D i'm sure i wont have any clearance issues if I go that route.
Well, more like welded a few scraps of 2" pipe I had laying around the shop. I like the sound, compared to my Nitto (which is my fav exhaust for the Yaris but it would melt my RR bag), this pipe is louder but deeper. I'll grab a video for you when I get a couple extra minutes.
TerenceCruzThread starterCali · Jun 25, 2015#408
Originally Posted by coheed ↑
Well, more like welded a few scraps of 2" pipe I had laying around the shop. I like the sound, compared to my Nitto (which is my fav exhaust for the Yaris but it would melt my RR bag), this pipe is louder but deeper. I'll grab a video for you when I get a couple extra minutes.
From where did you weld it though? And sweet thanks man!

Originally Posted by ern-diz ↑
Nice.

I got a K&N drop in, but was disappointed to see the built in mesh on the filter box, which I couldn't help but feel must reduce airflow regardless of filter used. 🤷
Thanks man! And yes, I sadly saw that right now when I installed this.. But, hopefully these help still! Did you notice an improvement in MPG or throttle response?
coheedMaiden, NC · Jun 25, 2015#409
Originally Posted by TerenceCruz ↑
From where did you weld it though? And sweet thanks man!
It starts at the bend right above the axle. I have nothing going on today so I should be able to get a video, and snap some pics so you can see what it looks like.

And on the wheel front, I feel ya. I think mesh looks good, but for a "stance" look I think larger full face wheels look better. I think it's because the Yaris is so tall for a compact car, and cars with more surface area seem to look better with full face wheels.
ern-dizCA all day · Jun 25, 2015#410
Originally Posted by TerenceCruz ↑
Thanks man! And yes, I sadly saw that right now when I installed this.. But, hopefully these help still! Did you notice an improvement in MPG or throttle response?
I want to say the throttle response felt better after dropping in the K&N, but I haven't noticed significant change in mpg.
TerenceCruzThread starterCali · Jun 25, 2015#411
Originally Posted by ern-diz ↑
I want to say the throttle response felt better after dropping in the K&N, but I haven't noticed significant change in mpg.
Hmm, okay for sure! Thanks for the info!
TerenceCruzThread starterCali · Jul 6, 2015#412
Put a 5mm spacer in the driver side rear to try and even out the offset in the rear cause of our dumb crooked torsion beam. In this picture it looks like the left side pokes more, but it's probably cause of the angle. In person it looks more even :) I need an exhaust already.. By the way if anyone is going to Wekfest this Sunday, July 12th I will be there! Hit me up :D

Picture not included in this copy

Noticed a white Yaris parked next to me at work. I guess here's a stock vs. not picture too lol. I just like this picture, even though this is BEFORE the 5mm spacer. The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol.

Picture not included in this copy
ern-dizCA all day · Jul 6, 2015#413
👍
FreestylinCalgary, Alberta · Jul 7, 2015#414
Lookin' good man.. keep it up!
TerenceCruzThread starterCali · Jul 7, 2015#415
Originally Posted by ern-diz ↑
👍
Originally Posted by Freestylin ↑
Lookin' good man.. keep it up!
Thank you guys! 😁
yarisugiハワイ · Jul 7, 2015#416
Originally Posted by TerenceCruz ↑
The two girls just happened to walk by when I took it, and no, sadly the car didn't break their necks.. OH WELL. Lol.
Give the ladies a ride in your car and they're sure to break necks.
Baby will probably throw up breakfast all over your back seat first.
TerenceCruzThread starterCali · Jul 7, 2015#417
Originally Posted by yarisugi ↑
Give the ladies a ride in your car and they're sure to break necks.
Baby will probably throw up breakfast all over your back seat first.
LMFAO. So true Sugi. I've get to adjust my front dampening too.
WorkTLSoCal · Jul 7, 2015#418
Where is Wekfest at?
TerenceCruzThread starterCali · Jul 7, 2015#419
Originally Posted by WorkTL ↑
Where is Wekfest at?
It's at Mcnery Convention Center in San Jose! Gona be so much fun lol
FreestylinCalgary, Alberta · Jul 8, 2015#420
Will your car be in the show?
TerenceCruzThread starterCali · Jul 8, 2015#421
Originally Posted by Freestylin ↑
Will your car be in the show?
No no, definitely not worthy in my opinion 🤷 Maybe one day!
FreestylinCalgary, Alberta · Jul 9, 2015#422
Originally Posted by TerenceCruz ↑
No no, definitely not worthy in my opinion 🤷 Maybe one day!

Its worth a shot! You don't see many slammed Yaris entering these events for a long time. It will be one of a kind in the show!
TerenceCruzThread starterCali · Jul 9, 2015#423
Originally Posted by Freestylin ↑
Its worth a shot! You don't see many slammed Yaris entering these events for a long time. It will be one of a kind in the show!
Definitely true! I have a nasty gash and a door ding on my driver side sideskirt though 😢 Maybe I'll enter next year if I get the body damaged fixed, get a good exhaust system, and real deal wheels! Hahah. I appreciate it though, thanks for the kind words! 👍
WorkTLSoCal · Jul 13, 2015#424
How much negative camber can you run up front once you installed 2 sets of camber bolts?
TerenceCruzThread starterCali · Jul 13, 2015#425
Originally Posted by WorkTL ↑
How much negative camber can you run up front once you installed 2 sets of camber bolts?
You're supposed to get like -3.5 camber with two bolts per side, since each give you +/- 1.75. But, I'm only running like -2.2, and I thought I installed em to max negative camber. Idk if I installed em right I guess, but the camber ended up being exactly what I wanted anyways, so it's all good haha.
WorkTLSoCal · Jul 13, 2015#426
I have one set of H&R bolts installed. Maxed out at -2.8, I'm shooting for -4.
TerenceCruzThread starterCali · Jul 15, 2015#427
Originally Posted by WorkTL ↑
I have one set of H&R bolts installed. Maxed out at -2.8, I'm shooting for -4.
Yeah see, that's weird how that works out. With a second H&R bolt I'm sure you can get what you're looking for! I wanted to keep it around -2.
coheedMaiden, NC · Jul 15, 2015#428
With the smallest one from Toyota and the H&R's I had I got to -3.8°.
TerenceCruzThread starterCali · Jul 16, 2015#429
Originally Posted by coheed ↑
With the smallest one from Toyota and the H&R's I had I got to -3.8°.
Sheesh I must definitely had something going wrong lmao. I know I installed em correctly.. But probably just not to max.
TerenceCruzThread starterCali · Jul 17, 2015#430
Random pictures, went to my buddy Corey's house for some Coronas and threw on some stickers in the rear. Style Over Comfort, and my Vape Life Co. sticker in white instead of black haha.

Picture not included in this copy
Picture not included in this copy
TerenceCruzThread starterCali · Aug 16, 2015#431
So after realizing I STILL had some reverse rake going on, I raised the rear once again, and also took out the spare tire (aka weight reduction, lmao jk) But, I am definitely happy with the results and the car barely EVER scrapes in the rear now, even with passengers, which is amazing. On roads I usually would hit my subframe pretty hard I now can go over with no issues. Front still scrapes only when turning, so that doesn't bother me too much. Maybe I will do some more work to the front fenders in the future. I start my mental health specialist program tomorrow and it's about a 45 minute commute both ways, so the fact I raised the rear actually helped make me much more comfortable and confident to drive it around, especially if I have some classmates ride with me. Subframe is still about 2" from the ground though. I'm also excited to start my serving job, so hopefully with tips will bring me some better income for more legit parts ;) I'm just enjoying the car, so here are some random pics of her being thirsty ;) I'm also thinking about removing my mud flaps. They look so tiny in the rear cause of my wheels lol. Thoughts?

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
coheedMaiden, NC · Aug 16, 2015#432
When you're running around that low, half an inch can make all the difference in the world lol. Yea the mud flaps look a little goofy with how wide the wheels are. I might look better with some "rally style" ones.

Edit: Like these, they'd cover more of the tire so it wont look as goofy

Picture not included in this copy
TerenceCruzThread starterCali · Aug 18, 2015#433
Originally Posted by coheed ↑
When you're running around that low, half an inch can make all the difference in the world lol. Yea the mud flaps look a little goofy with how wide the wheels are. I might look better with some "rally style" ones.

Edit: Like these, they'd cover more of the tire so it wont look as goofy

Picture not included in this copy

Ugh I want that exhaust. But yeah man that half an inch was beautiful lol and it still looks pretty good. So I'm happy.
ern-dizCA all day · Aug 19, 2015#434
How does it do on the freeway?

After lowering mine just a few inches with S Tech's, I get some rubbing when going through gutter dips too quickly and when hitting uneven spots on the freeway at higher speed.
TerenceCruzThread starterCali · Aug 19, 2015#435
Originally Posted by ern-diz ↑
How does it do on the freeway?

After lowering mine just a few inches with S Tech's, I get some rubbing when going through gutter dips too quickly and when hitting uneven spots on the freeway at higher speed.
I get virtually no rubbing on the freeway haha. Well I mean with the exception of really big bumps, but other than that, even on normal imperfections I get no rubbing. Definitely happy with that, thanks to the max dampening and 10k/8k Swift springs haha.
ern-dizCA all day · Aug 20, 2015#436
Originally Posted by TerenceCruz ↑
I get virtually no rubbing on the freeway haha. Well I mean with the exception of really big bumps, but other than that, even on normal imperfections I get no rubbing. Definitely happy with that, thanks to the max dampening and 10k/8k Swift springs haha.
Hmm...I might need to look at getting new wheels, rolling the fenders, something...it's not that bad, but it bugs me a little...
TerenceCruzThread starterCali · Aug 20, 2015#437
Originally Posted by ern-diz ↑
Hmm...I might need to look at getting new wheels, rolling the fenders, something...it's not that bad, but it bugs me a little...
It's probably just because you're on 17s. Fender rolling would definitely help too of course. When I had Tein S Techs I had 15x7 +31 offset (Because of my 10mm spacers) And they never rubbed even with passengers haha. My exhaust did. I had a Tanabe Medalion at the time but I decided to sell it cause it hung way too low and I wanted to get my coilovers and wheels instead.
ern-dizCA all day · Aug 20, 2015#438
Originally Posted by TerenceCruz ↑
It's probably just because you're on 17s. Fender rolling would definitely help too of course. When I had Tein S Techs I had 15x7 +31 offset (Because of my 10mm spacers) And they never rubbed even with passengers haha. My exhaust did. I had a Tanabe Medalion at the time but I decided to sell it cause it hung way too low and I wanted to get my coilovers and wheels instead.
The thing is, the official wheel and tire guide thread says that 205/40/17 is a commonly used size for lowering. I've also seen other posts from members running the same wheel size and springs, asked them about rubbing and they claim they get none. Some have asked me what my offset is, but I don't know what it is. As far as you know, can offset make the difference between rubbing and no rubbing on the same wheel size?
TerenceCruzThread starterCali · Aug 21, 2015#439
Originally Posted by ern-diz ↑
The thing is, the official wheel and tire guide thread says that 205/40/17 is a commonly used size for lowering. I've also seen other posts from members running the same wheel size and springs, asked them about rubbing and they claim they get none. Some have asked me what my offset is, but I don't know what it is. As far as you know, can offset make the difference between rubbing and no rubbing on the same wheel size?
Ahhh I see! Yes man offset could definitely be the reason why you're rubbing.
ern-dizCA all day · Aug 21, 2015#440
Originally Posted by TerenceCruz ↑
Ahhh I see! Yes man offset could definitely be the reason why you're rubbing.
Well, shit lol. Thanks, Now I can think about rolling fenders, or just getting new wheels since mine have some battles scars on them anyway.
TerenceCruzThread starterCali · Aug 21, 2015#441
Originally Posted by ern-diz ↑
Well, shit lol. Thanks, Now I can think about rolling fenders, or just getting new wheels since mine have some battles scars on them anyway.
Haha no problem! Definitely roll the fenders regardless if you can. You'll be fine with around 30 offset. If you want to go flush just add some camber and you'll be fine. I had to roll, pull, and flare my rears to fit +10 offset. So it really comes down to what look you're trying to go for. Let me know that, and I will help you as much as I can haha. Here are my two wheel set ups:

Top:
15x7 +31 (with the 10mm hub spacers, no negative camber) Enkei RPF1 (Really wish I kept those)
Bottom
16x8.5 +10 (because of 10mm hub spacers, 5mm wheels spacers, and -3 camber) JNC 004

Picture not included in this copy
ern-dizCA all day · Aug 21, 2015#442
Originally Posted by TerenceCruz ↑
Haha no problem! Definitely roll the fenders regardless if you can. You'll be fine with around 30 offset. If you want to go flush just add some camber and you'll be fine. I had to roll, pull, and flare my rears to fit +10 offset. So it really comes down to what look you're trying to go for. Let me know that, and I will help you as much as I can haha. Here are my two wheel set ups:

Top:
15x7 +31 (with the 10mm hub spacers, no negative camber) Enkei RPF1 (Really wish I kept those)
Bottom
16x8.5 +10 (because of 10mm hub spacers, 5mm wheels spacers, and -3 camber) JNC 004
Thanks. Not going for the flush look, just like the look of 17's on the 2" drop, but don't want any rub. I like that almost stock look. Like it came from the factory like that. Don't like the tires rubbing when I hit dips or go over uneven spots on the fwy.
TerenceCruzThread starterCali · Aug 21, 2015#443
Originally Posted by ern-diz ↑
Thanks. Not going for the flush look, just like the look of 17's on the 2" drop, but don't want any rub. I like that almost stock look. Like it came from the factory like that. Don't like the tires rubbing when I hit dips or go over uneven spots on the fwy.
Gotcha, okay cool. Definitely roll the fenders when you can. Keep your current wheels, or maybe when looking at some new wheels, keep the offset I told you in mind. It'll look great! I kind of miss just being on springs. When I get another car I'll definitely change this car from low to functional with some meaty tires and a raise in height 👍
coheedMaiden, NC · Aug 21, 2015#444
I miss being able to start up and take off. Having to fiddle with ride height before I move gets annoying 🤣
TerenceCruzThread starterCali · Aug 22, 2015#445
Originally Posted by coheed ↑
I miss being able to start up and take off. Having to fiddle with ride height before I move gets annoying 🤣
Hahaha yeah man my boy feels the same way with his bagged Subie. You have the manual air management? Regardless it must be nice to be on air :( I'll get there one day! Definitely trying to hop on a big body Lexus VIP build in the near future.
coheedMaiden, NC · Aug 24, 2015#446
Yea I have manual paddles, which are a huge pain. There are so many fittings compared to analog or digital electronic management. My right front leaks and I can't figure out from where, so I have to top it off every 3 minutes.
ern-dizCA all day · Aug 24, 2015#447
Originally Posted by TerenceCruz ↑
Gotcha, okay cool. Definitely roll the fenders when you can. Keep your current wheels, or maybe when looking at some new wheels, keep the offset I told you in mind. It'll look great! I kind of miss just being on springs. When I get another car I'll definitely change this car from low to functional with some meaty tires and a raise in height 👍
Thx for the info...

Can't go wrong either way, but I think your car looks tremendous.
TerenceCruzThread starterCali · Aug 25, 2015#448
Originally Posted by ern-diz ↑
Thx for the info...

Can't go wrong either way, but I think your car looks tremendous.
Thanks brotha!!
TerenceCruzThread starterCali · Aug 25, 2015#449
Originally Posted by coheed ↑
Yea I have manual paddles, which are a huge pain. There are so many fittings compared to analog or digital electronic management. My right front leaks and I can't figure out from where, so I have to top it off every 3 minutes.
Sheeeesh. I feel like there are pros and cons for manual paddles. MOSTLY cons but you know what I mean. I like the gauges you get with them and how they seem more accurate. When my boy takes passengers he can air up in the back a little bit, and the gauges seem pretty accurate in terms of driver side to passenger side.
coheedMaiden, NC · Aug 25, 2015#450
Originally Posted by TerenceCruz ↑
Sheeeesh. I feel like there are pros and cons for manual paddles. MOSTLY cons but you know what I mean. I like the gauges you get with them and how they seem more accurate. When my boy takes passengers he can air up in the back a little bit, and the gauges seem pretty accurate in terms of driver side to passenger side.
Don't get me wrong, I like the control I have over my height. I just wish I could pin down my leaking lol. Also I wish it aired out a little bit quicker. The exhaust port on the manual valves are 1/8" and it takes so long for the front to go down. And I run twice the air in the front as the rear, so the back of the car is down 5 sec before the front.

I'm liking the 16's on your car more and more man. You're convincing me that static Yarii need 16's.