Replies continued
coheedMaiden, NC · Nov 27, 2014#301TerenceCruzThread starterCali · Nov 27, 2014#302 Originally Posted by
coheed ↑
Sweet, yeah a buddy of mine on IG showed me those springs. The 2.5ID threw me off though so I didn't think I could use those. If I go with these I'm probably gona go with 6" 10k front, 4" 8k in the rear. If I could find them on this website.. Haha. Am I looking at this wrong? Under 6" spring it only goes up to 7k? And this 4" only goes up to 5k?
coheedMaiden, NC · Nov 27, 2014#303Looks like the only choices for 4" are 7k or 9k and it looks like 6" goes up to 12.5k. All their rates are lbs/in not kg/mm. Edit: conversion rates for springs>
http://coilover-store.com/expert-adv...kgmm-to-lbsin/ And like i said I'm running their 2.5" ID springs front and rear with no issues. But be advised with my 4" on the rear with the collars just a 1/4" fron the top of the perch my shock is almost bottoming out, like I have about 3/8" between bumpstop and body....
TerenceCruzThread starterCali · Nov 30, 2014#304 Originally Posted by
coheed ↑ Looks like the only choices for 4" are 7k or 9k and it looks like 6" goes up to 12.5k. All their rates are lbs/in not kg/mm. Edit: conversion rates for springs>
http://coilover-store.com/expert-adv...kgmm-to-lbsin/ And like i said I'm running their 2.5" ID springs front and rear with no issues. But be advised with my 4" on the rear with the collars just a 1/4" fron the top of the perch my shock is almost bottoming out, like I have about 3/8" between bumpstop and body....
Ahh, gotcha. Thanks for all the help man.
yarisugiハワイ · Nov 30, 2014#305Forget the springs and put on those wheels now!
TerenceCruzThread starterCali · Nov 30, 2014#306 Originally Posted by
yarisugi ↑ Forget the springs and put on those wheels now!
Hahaha Sugi! Man, I know. It's so tempting. I just feel like 3k is so soft, and I want to be patient and do the stiffer springs, camber shims and wheels all at once.. But.. I might just do that and worry about proper fitment with the stiffer springs and camber shims after they're on.. 🤣
TerenceCruzThread starterCali · Nov 30, 2014#307sheekeebutMississauga, GTA, Toronto, ON · Nov 30, 2014#308Shiny!
TerenceCruzThread starterCali · Nov 30, 2014#309 Originally Posted by
sheekeebut ↑ Shiny!
Haha thanks man. Sugi has BEEN telling me to mount tires and put them on, but I've been stubborn and wanting to wait til I get everything done at once, but his last comment is making me just want to put them on. I think I just might.. 😆
mr_milesPortland, OR · Dec 2, 2014#310Dooooooo iiiiiiiittt.........they look so good :D
TerenceCruzThread starterCali · Dec 3, 2014#311 Originally Posted by
mr_miles ↑ Dooooooo iiiiiiiittt.........they look so good :D
Thanks man :D They will be on shortly. All I need are the proper lugs and my camber shims, then I'll throw them on. I'll worry about the stiffer springs later ;)
TerenceCruzThread starterCali · Dec 4, 2014#312TerenceCruzThread starterCali · Dec 4, 2014#313Scratch that, I don't think they will. I need lugs that are conical I believe, short and open ended, and 12x1.5.
mr_milesPortland, OR · Dec 4, 2014#314ezhacker1San Francisco · Dec 4, 2014#315Terence, once you get them wheels on, we are doing a photo shoot :)
TerenceCruzThread starterCali · Dec 4, 2014#316 Originally Posted by
mr_miles ↑
Ahh those aren't bad at all! Hmm.. Haha.
TerenceCruzThread starterCali · Dec 4, 2014#317 Originally Posted by
ezhacker1 ↑ Terence, once you get them wheels on, we are doing a photo shoot :)
Yes that's for sure!! Haha. Can't wait. YarisWorld will be the first to know when they're on lol. Hopefully the 3k springs will be okay for a month or two. I just won't have people in the back until I get my swift springs lol.
TerenceCruzThread starterCali · Dec 4, 2014#318ezhacker1San Francisco · Dec 5, 2014#319Nothing externally has changed on my car since last photo shoot i did at Treasure Island. Just more gadgets inside. But yeah, we gotta hang out.
TerenceCruzThread starterCali · Dec 11, 2014#320So lug nuts came in the mail, just had some questions.. These wheels "supposedly" have a conical seat for the lug nuts. So that is what I ordered. Short lugs with an open end in a conical. Is it normal for the lug not to sit like this on and behind the wheel? Or is the lug supposed to go all the way down to keep the wheel in place? Sorry if this is a noob question haha just want to make sure. Seems secure on top, but as you can see theres some room behind the face of the wheel. Thanks for the help guys.
Picture not included in this copy
Picture not included in this copy
coheedMaiden, NC · Dec 11, 2014#321Take a picture of the bottom of the lug nut, as long as the taper of the lug nut is the same as the lug seat on the wheel is the same it should be fine.
TerenceCruzThread starterCali · Dec 11, 2014#322 Originally Posted by
coheed ↑ Take a picture of the bottom of the lug nut, as long as the taper of the lug nut is the same as the lug seat on the wheel is the same it should be fine.
Okay perfect. I know the lug nuts seat nicely so everything should be good then. Thanks man!
TerenceCruzThread starterCali · Dec 29, 2014#323Wheels are finally on! JNC 004 in polished finish, 16x8.5 +25 wrapped in 195/45s.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Still have some fender work to do to minimize rubbing, go -5 in the rear with camber shims, and get shorter stiffer springs to get tighter fitment. Let me know what you guys think! Thanks everyone!
ezhacker1San Francisco · Dec 29, 2014#324Omg, that's perfect, so jealous to be low.. But that's lip destroying low lol. I'm stuck with having no way to put camber in rear with my JDM axle.
TerenceCruzThread starterCali · Dec 29, 2014#325 Originally Posted by
ezhacker1 ↑ Omg, that's perfect, so jealous to be low.. But that's lip destroying low lol. I'm stuck with having no way to put camber in rear with my JDM axle.
Yeah man it's definitely a little more suspect to drive now, but it's all worth it to me haha. Once I get the fender work done and get stiffer springs, I should be solid. But thanks man! And dang, you can't put camber with a JDM axle? That's unfortunate, but at least you have rear disk brakes haha.
MiSFiTx87661 SoCal · Dec 29, 2014#326wow🙇🙇🙇been waiting to see them on, worth the wait👍
TerenceCruzThread starterCali · Dec 30, 2014#327 Originally Posted by
MiSFiTx87 ↑ wow🙇🙇🙇been waiting to see them on, worth the wait👍
Thanks a lot man! It was so hard to be patient, but it was DEFINITELY worth the wait haha.
TerenceCruzThread starterCali · Dec 30, 2014#328I also definitely want to do like a black housing in the headlights. I think it would look pretty sick.
FreestylinCalgary, Alberta · Dec 30, 2014#329Lookin' good bro!
Are you currently running the Megans? What spring rate are you running both front and rear? If you are still on 6kg/mm on the front, then from the looks of it you may run into rubbing issues when you turn or go over speed bumps.
TerenceCruzThread starterCali · Dec 30, 2014#330 Originally Posted by
Freestylin ↑ Lookin' good bro!
Are you currently running the Megans? What spring rate are you running both front and rear? If you are still on 6kg/mm on the front, then from the looks of it you may run into rubbing issues when you turn or go over speed bumps.
Thanks bro!! Unfortunately i am still running the 6k/3k that came with the coils. I'll be upgrading to probably 10k/8k as soon as I can. For now I have camber bolts in the front, and I can actually do a full lock. And that's with a minor roll, so hopefully it'll clear when I get a better roll job done. I'm also waiting on a reply for some -5 camber shims.
yarisugiハワイ · Dec 30, 2014#331More pics, sir!
TerenceCruzThread starterCali · Dec 30, 2014#332Sugi where are you?! I finally have them on! Hahaha
TerenceCruzThread starterCali · Dec 30, 2014#333 Originally Posted by
yarisugi ↑ More pics, sir!
WOAH I posted this before I saw your comment! Weird! Haha okay I'll upload some more! One sec
TerenceCruzThread starterCali · Dec 30, 2014#334More pics! The front pokes out a bit more, I don't know why. I installed camber bolts in there (one on each side) but I don't really notice the -1.5. I'll probably add one more on each side. The front passenger side is also a little higher than the front driver side. I still gotta adjust ride height and get fenders rolled before I take it to get aligned. Right now I am saving up for -5 camber shims for the rear (which will hopefully space the rear out a little more to make it even at least), as well as 10k/8K Swift springs. These 6k/3k springs aren't going to work for me for long lol. JNC center caps are on as of right now as well. Hope you guys like the pics! Sorry for the phone quality haha.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
yarisugiハワイ · Dec 31, 2014#335Nice height TC. Looks like you'll be angling over speed bumps and sweeping up leaves on your street.
TerenceCruzThread starterCali · Dec 31, 2014#336 Originally Posted by
yarisugi ↑ Nice height TC. Looks like you'll be angling over speed bumps and sweeping up leaves on your street.
Thanks Sugi! And yes I most definitely will be avoiding speedbumps for now haha. Still gotta adjust height and add camber. Rubbing is pretty bad right now haha.
TerenceCruzThread starterCali · Jan 3, 2015#337Random phone pics, haha.
Picture not included in this copy
Picture not included in this copy
ezhacker1San Francisco · Jan 3, 2015#338Yep, chrome/polished wheels look best on black cars. Have you seen Martin's new wheels?
TerenceCruzThread starterCali · Jan 3, 2015#339 Originally Posted by
ezhacker1 ↑ Yep, chrome/polished wheels look best on black cars. Have you seen Martin's new wheels?
Thanks man! As soon as I get a legit fender roll lets meet up and take some pics! And no I havent man, what wheels did he get??
ezhacker1San Francisco · Jan 3, 2015#340I want to go down to 16s now so bad.
TerenceCruzThread starterCali · Jan 3, 2015#341 Originally Posted by
ezhacker1 ↑ I want to go down to 16s now so bad.
Yeah man I love 16s haha. What wheels did Martin get?
TerenceCruzThread starterCali · Jan 7, 2015#342Last night I got a better fender roll done, and adjusted ride height to fix the reverse rake a little bit. Took her to get aligned today, and gave her a fresh wash :) Threw on some TRD valve stem caps, and I might throw on some 5mm spacers on in the rear as well.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Some of my friends like the rear tuckage, I kinda want the ride height to be level. If anything it's okay if my rear is a little higher, but that's still not the case right now since I'm only on the spring in the rear haha.
TerenceCruzThread starterCali · Jan 20, 2015#343Would anyone happen to know if I can use 65mm ID coil springs on my fronts if my Megan coils use 62mm ID coil springs? I know the rear doesn't matter as much since it should work as long as it fits on the perch/locking rings (If I end up using the locking rings), but I know in the front it'll go over the strut and locking rings.
EDIT: Nevermind, just going to suck it up and save for Swift springs. I WAS looking for a cheaper alternative, but hey, there's a reason why they're so expensive. Plus, I know the Swift springs work really well with Megan coilovers (via the internet) haha.
TerenceCruzThread starterCali · Jan 30, 2015#344Okay, does anyone happen to know where I could just buy projector headlights with the single projector? I'm not a fan of the dual angel eye ones we see all the time, I really want to find some like this.
https://www.google.com/search?q=toyo...73%3B700%3B467 I know I can retrofit a projector, but I'm curious if I can just buy a smoked set.. Heh :D
yarisugiハワイ · Jan 30, 2015#345I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's
Yaris retrofit.
Hope this might help if you decide on a DIY.
EDIT: I forgot about
PETERPOOP's write up that was informative as well.
TerenceCruzThread starterCali · Jan 30, 2015#346 Originally Posted by
yarisugi ↑ I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's
Yaris retrofit.
Hope this might help if you decide on a DIY.
EDIT: I forgot about
PETERPOOP's write up that was informative as well.
Ahh man, I was on Instagram talking to some guys from Indonesia, I guess they got theirs from a supplier called Bixenon, but I'm pretty sure you can't buy the headlights like that.. But thanks man, I try! If I get a spare set of headlights I might try it out. I read PETERPOOP's write up, and I just feel like I would get so lost without someone there to help hahah.
TerenceCruzThread starterCali · Jan 30, 2015#347Oh yeah guys, some other small updates. Kind of. Lol
Added a 10mm hub spacer, and washers on the rear lower hub bolts to get negative camber. So far so good.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Also added my bumper quick release
Picture not included in this copy
TerenceCruzThread starterCali · Jan 30, 2015#348 Originally Posted by
yarisugi ↑ I have yet to see an aftermarket single projector headlight for the Yaris.
Looks like you're pretty good at DIY. So you might want to give it a shot!
Do you have a spare set of headlights to play around with?
Sevenism from HIDPlanet did a nice write up on his customer's
Yaris retrofit.
Hope this might help if you decide on a DIY.
EDIT: I forgot about
PETERPOOP's write up that was informative as well.
Btw, Sevenism's customer got exactly what I wanted *drool* That's perfect..
MiSFiTx87661 SoCal · Feb 1, 2015#349vitz looking good as always. is easy to install the bumper quick release?
TerenceCruzThread starterCali · Feb 1, 2015#350 Originally Posted by
MiSFiTx87 ↑ vitz looking good as always. is easy to install the bumper quick release?
Thanks man! Yes it is. Watched a quick 2 minute video on youtube to get the right size drill bit. Only hard part was figuring out how far to space the two out to get the band tight enough.