Yarisworld Archive

My 2011 Vitz

655 posts · 261,587 views · page 8 of 14

Replies continued

TerenceCruzThread starterCali · Feb 1, 2015#351
Moar pics for sh*ts and giggles :D Sorry for the picture wh0ring lol.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
WorkTLSoCal · Feb 14, 2015#352
Sick! I need that camber in the rear... how did you get it so stanced? -4?
yarisugiハワイ · Feb 15, 2015#353
Answer on post #351 - washers on bottom half of hub bolts.
TerenceCruzThread starterCali · Feb 15, 2015#354
Originally Posted by WorkTL ↑
Sick! I need that camber in the rear... how did you get it so stanced? -4?
Thanks a lot man! And yes as Sugi said, 3 washers each on the two lower hub bolts. I added an extra washer on the left front side hub bolt in an attempt to fix toe in.

Originally Posted by yarisugi ↑
Answer on post #351 - washers on bottom half of hub bolts.
Thanks for that Sugi!
TerenceCruzThread starterCali · Feb 15, 2015#355
Also, Valentine's Day gift from my girlfriend. Sorry I can't resize on my phone, I'll do it later lol. Big picture printed of my car, along with a mini version haha. Too bad they don't come in 2 doors, but I love it regardless! She's the best.

Picture not included in this copy
Picture not included in this copy
yarisugiハワイ · Feb 17, 2015#356
I like that framed picture of your car!
Who took the shot?
ern-dizCA all day · Feb 17, 2015#357
Car is looking really nice, TerenceCruz.
TerenceCruzThread starterCali · Feb 18, 2015#358
Originally Posted by yarisugi ↑
I like that framed picture of your car!
Who took the shot?
Thanks Sugi! She took it, just edited it slightly, then printed it out at Kinkos.

Originally Posted by ern-diz ↑
Car is looking really nice, TerenceCruz.
Much appreciated man, thank you!
TerenceCruzThread starterCali · Mar 17, 2015#359
Hey guys, haven't updated this in a while. No real updates, just been driving the car and enjoying it. Still saving for my 10k/8k Swift springs, just had to take care of some more important stuff first. Anyways, here are some pictures :) I still have to install my second pair of camber bolts in the front, and drop the front a little bit more too when I get the Swift springs. Thanks for looking!

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
WorkTLSoCal · Mar 17, 2015#360
I love it
ern-dizCA all day · Mar 17, 2015#361
I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.
TerenceCruzThread starterCali · Mar 18, 2015#362
Originally Posted by WorkTL ↑
I love it
Thanks so much!

Originally Posted by ern-diz ↑
I've been considering a front lip like the one you have, Terence. I think it matches the mud flaps nicely.
Thank you, man! I love the lip, it doesn't compare to the JDM RS front lip, but hey, $10 for a decent looking lip is fine with me. For now, of course haha. I actually was considering taking off the mud flaps since they're kind of small compared to the width of the rim, but I don't know yet haha.
dumbo0San Francisco, CA · Apr 11, 2015#363
terence, what did you use to cover your rear wiper? taking off mine too lol
TerenceCruzThread starterCali · Apr 11, 2015#364
Originally Posted by azn_driver ↑
Looks great, wish I can go that low with my yaris but uh the s/o will kill me..

and about your Swift Spring upgrade, here is another reputable company that makes springs with custom spring rates:


The s/o? Haha but thanks a lot man, much appreciated. Sweet, i'll take a look at that company!


http://www.hypercoils.com/
Originally Posted by dumbo0 ↑
terence, what did you use to cover your rear wiper? taking off mine too lol
Haha nice! I just bought a 1" plastic plug from Lowes lol
TerenceCruzThread starterCali · May 6, 2015#365
Finally received my 6" 10k and 5" Swift springs via FedEx. Time to go lower and fix my fitment to get it exactly how I want it. I'll post a picture of the car when they're installed! Now I gotta figure out what to set my dampening to lol.

Picture not included in this copy
TerenceCruzThread starterCali · May 9, 2015#366
Hey guys, so the springs are installed along with the second pair of camber bolts in the front. They ride great, and I haven't even adjusted my dampening yet. But, only problem I'm having is in the front. The front left side is making some clunking noise as if the spring is loose or something, and the right side is just making some creaking sound. Do you guys have any idea what it might be? Thanks a lot!

Note: Megan Racing coilovers

Went from 8" 6k Megan springs in the front to 6" 10k Swift springs
Went from 7" 3k Megan springs in the rear to 5" 8k Swift springs
coheedMaiden, NC · May 9, 2015#367
Do the springs have those plastic sleeve things on them? If not that can be the creaking noise. As far as the clunking that's probably the rear springs. When I put the shorter springs on my rear they would pop up and down in the seats and clunk. They never unseated themselves though.
TerenceCruzThread starterCali · May 9, 2015#368
Originally Posted by coheed ↑
Do the springs have those plastic sleeve things on them? If not that can be the creaking noise. As far as the clunking that's probably the rear springs. When I put the shorter springs on my rear they would pop up and down in the seats and clunk. They never unseated themselves though.
Really? I'm almost positive the clunking is from the front.. And no they don't have the plastic sleeves on them cause they wouldn't fit on there. Megans were 62mm ID and Swifts are 60mm so the plastic sleeves wouldn't fit.
FreestylinCalgary, Alberta · May 10, 2015#369
Have the front springs been pre-loaded correctly?
TerenceCruzThread starterCali · May 10, 2015#370
Originally Posted by Freestylin ↑
Have the front springs been pre-loaded correctly?
There is some play where the springs can move up and down a bit, but I dropped some of the preload a little bit in order to get to the height I wanted. If I spin the shock down any more it's too close to my axle. I was wondering if it was the spring bouncing, but once the weight of the car is on the ground the springs shouldn't be able to move, correct?
TerenceCruzThread starterCali · May 10, 2015#371
Current ride height. About 1cm of clearance between the rear sidewall and fender, and maybe half an inch clearance in the front. I love it. But I will love it more when I get rid of that clunking noise and the tiny bit of creaking I hear lol.

Picture not included in this copy
TerenceCruzThread starterCali · May 12, 2015#372
Found the problem! It was actually my LOWER sway bar end link. I didn't even think to touch that because we didn't touch it in the first place (rookie mistake, I know lol). Shook the car while my friend was feeling for something loose, and he felt the lower sway bar end link rattle, so we tightened that, and now all is well! Now I'm just enjoying the lower ride height with less scraping. Best part of all, being able to take passengers again :) Current pics.

Picture not included in this copy
Picture not included in this copy
ern-dizCA all day · May 13, 2015#373
Fresh to death
TerenceCruzThread starterCali · May 13, 2015#374
Originally Posted by ern-diz ↑
Fresh to death
Haha! Right on man, thanks!
FreestylinCalgary, Alberta · May 14, 2015#375
Glad you got it figured out! Sometimes the smallest things causes a big problem lol.
TerenceCruzThread starterCali · May 15, 2015#376
Originally Posted by Freestylin ↑
Glad you got it figured out! Sometimes the smallest things causes a big problem lol.
Seriously though man :( Haha now I'm just enjoying the new ride man :)
TerenceCruzThread starterCali · May 27, 2015#377
Went a little lower then took her to my friend to get an alignment :)

Picture not included in this copy
FreestylinCalgary, Alberta · May 27, 2015#378
Are you getting more negative camber in as well or do you just need an alignment in general after playing with the ride height?
TerenceCruzThread starterCali · May 27, 2015#379
Originally Posted by Freestylin ↑
Are you getting more negative camber in as well or do you just need an alignment in general after playing with the ride height?
Added the Swift springs, lowered a bit more, and added the second pair of camber bolts! That's pretty much it, haha. I'm very content with the suspension now, just gotta find a way to adjust my front dampening with an allen key since I dont have the dampening keys. Misplaced them haha.
WorkTLSoCal · May 28, 2015#380
Perfect.
TerenceCruzThread starterCali · May 28, 2015#381
Originally Posted by WorkTL ↑
Perfect.
Thanks so much! It means a lot!
TerenceCruzThread starterCali · Jun 17, 2015#382
Just wanted to post some pics to let you guys know I'm alive and the Vitz is doing well :) Loving the ride of these Swifts, best upgrade yet.

Picture not included in this copy
Picture not included in this copy
coheedMaiden, NC · Jun 17, 2015#383
Looks awesome man.
ern-dizCA all day · Jun 17, 2015#384
If I may ask, what part of Cali are you in, Terence? I'm shopping springs and shops to install them. Could use a good recommendation, if near me.
TerenceCruzThread starterCali · Jun 17, 2015#385
Originally Posted by coheed ↑
Looks awesome man.
Thanks a lot man, likewise!

Originally Posted by ern-diz ↑
If I may ask, what part of Cali are you in, Terence? I'm shopping springs and shops to install them. Could use a good recommendation, if near me.
Sure man, no problem. I'm located in Nor Cal, in Fairfield. I usually just get springs online after researching them, and install them myself. With some help of course.
yarisugiハワイ · Jun 17, 2015#386
Cruz Drop Shop in Fairfield? Sounds like a plan.

btw, hands down one of the nicest Yaris around.
ern-dizCA all day · Jun 17, 2015#387
Originally Posted by TerenceCruz ↑
Sure man, no problem. I'm located in Nor Cal, in Fairfield. I usually just get springs online after researching them, and install them myself. With some help of course.
Thanks...I'm in SoCal and although plan to buy the springs online, would need a place to install. I'm more Bobby Digital than Robbie Analog when it comes to that stuff.
TerenceCruzThread starterCali · Jun 17, 2015#388
Originally Posted by yarisugi ↑
Cruz Drop Shop in Fairfield? Sounds like a plan.

btw, hands down one of the nicest Yaris around.
Sounds legit to me! Haha! And wow, that means a lot coming from you Sugi! Thanks man!

Originally Posted by ern-diz ↑
Thanks...I'm in SoCal and although plan to buy the springs online, would need a place to install. I'm more Bobby Digital than Robbie Analog when it comes to that stuff.
Haha yeah, I gotcha man. I'm just lucky to have a garage to use and a few friends with some free time to help me wrench on the car :)
ern-dizCA all day · Jun 17, 2015#389
Originally Posted by TerenceCruz ↑
Haha yeah, I gotcha man. I'm just lucky to have a garage to use and a few friends with some free time to help me wrench on the car :)
I have a garage and a list of friends too, but I have trust issues with doing it myself. I'd rather have a pro do it that does it all day long and can do it with their eyes closed. I worry about messing something up doing it myself since it's not something I've done before. My car work extends to changing batteries and oil. 😁
WorkTLSoCal · Jun 17, 2015#390
Nice!!

If not too much to ask, what are the Swift part #'s?

I got to get on YOUR level.
TerenceCruzThread starterCali · Jun 17, 2015#391
Originally Posted by ern-diz ↑
I have a garage and a list of friends too, but I have trust issues with doing it myself. I'd rather have a pro do it that does it all day long and can do it with their eyes closed. I worry about messing something up doing it myself since it's not something I've done before. My car work extends to changing batteries and oil. 😁
Haha! Yaknow, I guess I'm just young and broke until I finish school and get a real job. Gotta save where I can I guess 👍

Originally Posted by WorkTL ↑
Nice!!

If not too much to ask, what are the Swift part #'s?

I got to get on YOUR level.
Haha well thanks man! And no problem at all! Here you go!

6" 10k for my fronts: Z60-152-100
5" 8k for my rears: Z60-127-080
WorkTLSoCal · Jun 17, 2015#392
THANK YOU!
Supra_YarisDenton, TX · Jun 20, 2015#393
Love your car. Mine is black as well and I'm looking to stance mine as well. Do you know the offset of the wheels that are on it now?
TerenceCruzThread starterCali · Jun 20, 2015#394
Originally Posted by Supra_Yaris ↑
Love your car. Mine is black as well and I'm looking to stance mine as well. Do you know the offset of the wheels that are on it now?
Thank you man! Any pics of yours? But yesss, I'd love to see more stanced black yarii! And yes, the wheels are 16x8.5 +25. In the rear though, I have a 10mm hub spacers so they're now +15.
Supra_YarisDenton, TX · Jun 20, 2015#395
Cool thanks man. No pics yet! Im waiting to get my rims. Im thinking about going with some 15x8s with 0 offset. Will post pics when I get them!
TerenceCruzThread starterCali · Jun 21, 2015#396
Originally Posted by Supra_Yaris ↑
Cool thanks man. No pics yet! Im waiting to get my rims. Im thinking about going with some 15x8s with 0 offset. Will post pics when I get them!
No worries man, feel free to comment here if you ever have any questions. I check this thing pretty regularly. And ahh 0 offset would be tough lol. Don't wana go with 16s? :) I feel like they suit the body lines of the car better, to each their own of course though haha.
TerenceCruzThread starterCali · Jun 21, 2015#397
Just cause I like this rear shot ;) Also running a muffler delete currently.. Heh. Gona put it back on though haha.

Picture not included in this copy
Supra_YarisDenton, TX · Jun 21, 2015#398
I honestly cant decide between 15s or 16s. I recently got new tires for a 15inch rim and I really want new wheels now. Right now, it would be cheaper for me to get 15s and just transfer the tires over instead of having to buy new tires as well.
TerenceCruzThread starterCali · Jun 21, 2015#399
Originally Posted by Supra_Yaris ↑
I honestly cant decide between 15s or 16s. I recently got new tires for a 15inch rim and I really want new wheels now. Right now, it would be cheaper for me to get 15s and just transfer the tires over instead of having to buy new tires as well.
Maybe sell the tires and go with 16s :D Haha! Up to you man. I've seen 15s that look good. Aggressive with meaty tires.
TerenceCruzThread starterCali · Jun 21, 2015#400
So today, I put the muffler back on, took out the spare tire (that 15'' thing weighed like 25-30 lbs!) And I also tried to level the rear with the front (if anything a tiny bit higher so I can accommodate more passengers). Sometimes I felt like the rear sunk a bit lower, but now I feel much happier with it :)

Picture not included in this copy