Just out of curiousity. What damper settings do you run on your set up?
My 2011 Vitz
655 posts · 261,587 views · page 11 of 14
Replies continued
Will do! Ahh yes hub spacers will definitely do your car some justice. Maybe 16s and lower profile tires too? ;)Originally Posted by tadakun ↑Ah ok ok keep me updated. My buddy hooked me up with a guy in SoCal I think that supplied his custom spacers for he Avante Gardes. I'll def get some custom hub centric spacers shortly.
I'm running 32, max stiffness all around. I still rub in the rear, but at the height in the front, no rubbing which amazes me lolOriginally Posted by tadakun ↑Just out of curiousity. What damper settings do you run on your set up?
So, 3mm spacer on the rear driver side is on! Driveway and angle makes it look like the rear driver side pokes a little more but on a flat surface it's actually almost perfectly even IMO. I'm glad I chose the 3mm!
Picture not included in this copy12647844_898219360286879_1101061942_n by Tj Cruz, on Flickr
Picture that my lady took of me and the car ;)
Picture not included in this copy12606787_898219313620217_934230536_n by Tj Cruz, on Flickr
Here's a quick video a buddy of mine took and put together of our trip to Lafayette Reservoir where the 3rd annual Initial D meet took place. Such a great experience, with a lot of really nice cars! Over 1000 people and over 450 cars came so a lot of them were not allowed to enter the parking lot since it filled up. You'll see my car at 27 seconds, 1:06, and my lovely lady and I at 3:04.
https://www.youtube.com/watch?v=ukFo2mP3QVw
More pictures of the meet, and a photo shoot of some of us that were near enough to gather around the Initial D replica FD, FC, and AE86.
Picture not included in this copy12607259_898227400286075_1850694033_n by Tj Cruz, on Flickr
Picture not included in this copy12630680_898227373619411_2129099541_o by Tj Cruz, on Flickr
Also someone sent me a video of me leaving the meet. Wish it was better quality but it's all good!!
https://www.flickr.com/photos/128946.../shares/59GU5J
Enjoy guys! :D
Picture not included in this copy12647844_898219360286879_1101061942_n by Tj Cruz, on Flickr
Picture that my lady took of me and the car ;)
Picture not included in this copy12606787_898219313620217_934230536_n by Tj Cruz, on Flickr
Here's a quick video a buddy of mine took and put together of our trip to Lafayette Reservoir where the 3rd annual Initial D meet took place. Such a great experience, with a lot of really nice cars! Over 1000 people and over 450 cars came so a lot of them were not allowed to enter the parking lot since it filled up. You'll see my car at 27 seconds, 1:06, and my lovely lady and I at 3:04.
https://www.youtube.com/watch?v=ukFo2mP3QVw
More pictures of the meet, and a photo shoot of some of us that were near enough to gather around the Initial D replica FD, FC, and AE86.
Picture not included in this copy12607259_898227400286075_1850694033_n by Tj Cruz, on Flickr
Picture not included in this copy12630680_898227373619411_2129099541_o by Tj Cruz, on Flickr
Also someone sent me a video of me leaving the meet. Wish it was better quality but it's all good!!
https://www.flickr.com/photos/128946.../shares/59GU5J
Enjoy guys! :D
I plan on stayin 15s until I can afford a good set of wheels. I'm currently running the stock size tires until I wear them out. Then I'll change to a lower profile. You know....because more low. :D thanks for the heads up on the 3mm difference. I'll be getting 5mm and 8mm spacers after I slap on the camber plate.
Sweet definitely a good plan! I'm actually going to be taking off my 10mm PG hub spacers because the poke is actually a little too much and I need some clearance to go lower. So at the end I'll just be running the camber shims, with a 8mm spacer on the driver rear, and 5mm spacer in the passenger rear.Originally Posted by tadakun ↑I plan on stayin 15s until I can afford a good set of wheels. I'm currently running the stock size tires until I wear them out. Then I'll change to a lower profile. You know....because more low. :D thanks for the heads up on the 3mm difference. I'll be getting 5mm and 8mm spacers after I slap on the camber plate.
That 3rd annual Initial D meet vid was an enjoyable watch. Some really cool cars. Thanks for the share.
No problem, glad you enjoyed the video!Originally Posted by ern-diz ↑That 3rd annual Initial D meet vid was an enjoyable watch. Some really cool cars. Thanks for the share.
Some more awesome pictures I found of my car from the meet :)
Picture not included in this copy12647817_902597476515734_1457751552_n by Tj Cruz, on Flickr
Picture not included in this copy12648133_902597486515733_1566527378_n by Tj Cruz, on Flickr
Picture not included in this copy12647850_902597503182398_569264213_n by Tj Cruz, on Flickr
Picture not included in this copy12595940_902585929850222_973851448_n by Tj Cruz, on Flickr
Picture not included in this copy12647712_902585949850220_481613731_n by Tj Cruz, on Flickr
Picture not included in this copy12647817_902597476515734_1457751552_n by Tj Cruz, on Flickr
Picture not included in this copy12648133_902597486515733_1566527378_n by Tj Cruz, on Flickr
Picture not included in this copy12647850_902597503182398_569264213_n by Tj Cruz, on Flickr
Picture not included in this copy12595940_902585929850222_973851448_n by Tj Cruz, on Flickr
Picture not included in this copy12647712_902585949850220_481613731_n by Tj Cruz, on Flickr
that rear poke bruh. love it.
😁 Thank you man! I love it too, but the pictures actually didn't do it justice. It poked out a lot and all I could smell during the drive was burning tire! Hahaha. So, I took out the 10mm spacers (they are now for sale) So i'm just running camber shims in the rear, and I'm waiting on some 5mm spacers. Don't worry, the poke is still there 👍Originally Posted by tadakun ↑that rear poke bruh. love it.
I LOVE
Picture not included in this copy !!
Picture not included in this copy !!
🤣🤣🤣 Sugi can I have your air ride, wheels, and car please? Thank you! Can you post on here some pics of your car? I miss it and it gives me motivation ;) hahahahaOriginally Posted by yarisugi ↑I LOVE
Picture not included in this copy !!
+1Originally Posted by TerenceCruz ↑🤣🤣🤣 Sugi can I have your air ride, wheels, and car please? Thank you! Can you post on here some pics of your car? I miss it and it gives me motivation ;) hahahaha
Happy to say I finally pulled the trigger and purchased a used TRD axle back :D It just need a good polish but I think it's still in good condition! Will post pictures once it arrives and is installed! ;)
poke game on point. gawd that looks so good. 😳Originally Posted by yarisugi ↑I LOVE
Picture not included in this copy !!
awesome! can't wait to see.Originally Posted by TerenceCruz ↑Happy to say I finally pulled the trigger and purchased a used TRD axle back :D It just need a good polish but I think it's still in good condition! Will post pictures once it arrives and is installed! ;)
We need a general discussion just for the fitment gang around these parts. haha.
I totally agree lolOriginally Posted by tadakun ↑awesome! can't wait to see.
We need a general discussion just for the fitment gang around these parts. haha.
As promised ;) TRD axle back arrived and was installed yesterday!
Picture not included in this copy12696021_908297325945749_1462208345_n by Tj Cruz, on Flickr
Picture not included in this copy12713994_908297289279086_1244371052_n by Tj Cruz, on Flickr
Could not be ANY happier of how nice it fits under there. It has so much clearance which I needed for the cars current height. Sounds amazing too. I previously had a tanabe medalion touring axle back, but it hung so low I knew I would damage it. So I sold it before anything could happen.
Picture not included in this copy12721700_908300569278758_920895044_n by Tj Cruz, on Flickr
Picture not included in this copy12714344_908300582612090_1778355015_n by Tj Cruz, on Flickr
My only complaint has nothing to do with the exhaust at all, but instead it's the freakin heat shield that detached somehow (probably when I hit a fat bump) And now it makes an annoying rattling sound when it comes into contact with the piping. Anyone have any idea how that was originally attached? I tried 3M tape but it only worked for a little bit. Any help would be greatly appreciated. Thank you guys, and enjoy!
Picture not included in this copy12696021_908297325945749_1462208345_n by Tj Cruz, on Flickr
Picture not included in this copy12713994_908297289279086_1244371052_n by Tj Cruz, on Flickr
Could not be ANY happier of how nice it fits under there. It has so much clearance which I needed for the cars current height. Sounds amazing too. I previously had a tanabe medalion touring axle back, but it hung so low I knew I would damage it. So I sold it before anything could happen.
Picture not included in this copy12721700_908300569278758_920895044_n by Tj Cruz, on Flickr
Picture not included in this copy12714344_908300582612090_1778355015_n by Tj Cruz, on Flickr
My only complaint has nothing to do with the exhaust at all, but instead it's the freakin heat shield that detached somehow (probably when I hit a fat bump) And now it makes an annoying rattling sound when it comes into contact with the piping. Anyone have any idea how that was originally attached? I tried 3M tape but it only worked for a little bit. Any help would be greatly appreciated. Thank you guys, and enjoy!
A large plastic clip-in retainer/plug goes in there.Originally Posted by TerenceCruz ↑Anyone have any idea how that was originally attached? I tried 3M tape but it only worked for a little bit. Any help would be greatly appreciated. Thank you guys, and enjoy!
Ahh gotcha! I should have measured the hole size while I was under there. I'll visit Lowes or Home Depot and see if I can find something for it. Thanks!Originally Posted by WeeYari ↑A large plastic clip-in retainer/plug goes in there.
Mines still zip tied in place. Been like that for about 2 years now lol
How'd you zip tie that? Lol I was thinking about doing that but didn't know where! LolOriginally Posted by coheed ↑Mines still zip tied in place. Been like that for about 2 years now lol
just epoxy that bitch on. :D
Trust me that was a thought too haha.Originally Posted by tadakun ↑just epoxy that bitch on. :D
I think I just fed it through until it came out of the hole next to it with the epoxy over it. Been so long now I can't remember ha.
Unfortunately I don't remember there being another hole next to this one :( I'll try epoxy. It rattles when the car isn't moving -__- so annoying at a stop light or something for example.Originally Posted by coheed ↑I think I just fed it through until it came out of the hole next to it with the epoxy over it. Been so long now I can't remember ha.
for me i use them for looks..match the color of the car body..i opened them when i need fresh air during rainy season..i also opened them when my window fogs up..last time i used them when i wanted to take a picture on the mountain without getting my lens wet.. Picture not included in this copyOriginally Posted by Yarflana ↑Just curious...what are window visors good for? I have seen them around and obviously there is a market. Are they mainly for smokers who want to have fresh air, but no rain to come in when it is raining?
Seriously...just curious.
Sent from my ASUS_Z00AD using Tapatalk
I agree with this guy. It's rainy here int he Northwest. I've used it a few times to vent fresh air in.Originally Posted by rabbito ↑for me i use them for looks..match the color of the car body..i opened them when i need fresh air during rainy season..i also opened them when my window fogs up..last time i used them when i wanted to take a picture on the mountain without getting my lens wet.. Picture not included in this copy
Sent from my ASUS_Z00AD using Tapatalk
Little bit of an update: FINALLY upgraded my headunit. Went with a Pioneer USB/Bluetooth compatible deck since my OEM aux jack went out. I love it! I can have to be pretty much any color, but I went with amber to match the dash :D
Picture not included in this copy10656106_913768542065294_1431421791_n by Tj Cruz, on Flickr
Picture not included in this copy10656106_913768542065294_1431421791_n by Tj Cruz, on Flickr
Nice! Didn't want to go double din?
Thanks man! I did at first, but I'm pretty content with this :DOriginally Posted by ern-diz ↑Nice! Didn't want to go double din?
I've been debating upgrading. I would love to put a sub in and I think my aux jack is going. I'm pretty sure i'm only getting full sound out of the front passenger speaker in when i plug in the aux...Originally Posted by TerenceCruz ↑Little bit of an update: FINALLY upgraded my headunit. Went with a Pioneer USB/Bluetooth compatible deck since my OEM aux jack went out. I love it! I can have to be pretty much any color, but I went with amber to match the dash :D
Picture not included in this copy10656106_913768542065294_1431421791_n by Tj Cruz, on Flickr
Ahh yeah, at the moment I don't have a sub but I used to have my 12" Kicker in here. Going to get better wires and downgrade to a 10" Kicker with a slim box so I can have more trunk room ;) Yeah my aux only played on one side of the car. For a few months I was constantly buying and burning blank CDs to have current music.. Yeah.. Had enough of that. Lol. So much easier to update the playlist in my old iphone and leave it in the car for music.Originally Posted by tadakun ↑I've been debating upgrading. I would love to put a sub in and I think my aux jack is going. I'm pretty sure i'm only getting full sound out of the front passenger speaker in when i plug in the aux...
ok ok so that is likely the issue. I thought I had blown my speakers to the point they didnt even rattle. Until my wife bought me the new Dilated Peoples album and it bumped good haha.Originally Posted by TerenceCruz ↑Ahh yeah, at the moment I don't have a sub but I used to have my 12" Kicker in here. Going to get better wires and downgrade to a 10" Kicker with a slim box so I can have more trunk room ;) Yeah my aux only played on one side of the car. For a few months I was constantly buying and burning blank CDs to have current music.. Yeah.. Had enough of that. Lol. So much easier to update the playlist in my old iphone and leave it in the car for music.
Directors of Photography = WinOriginally Posted by tadakun ↑ok ok so that is likely the issue. I thought I had blown my speakers to the point they didnt even rattle. Until my wife bought me the new Dilated Peoples album and it bumped good haha.
👍 all my love for the west coast hip hopOriginally Posted by ern-diz ↑Directors of Photography = Win
You know what's up man 👍Originally Posted by tadakun ↑👍 all my love for the west coast hip hop
Happy Birthday 🍻
Thanks a lot WeeYari! I appreciate it! 🍻Originally Posted by WeeYari ↑Happy Birthday 🍻
Hope you had a great one.Originally Posted by TerenceCruz ↑Thanks a lot WeeYari! I appreciate it! 🍻
No clue it was your b day homie ! Happy belated mang !
Update:
Quick release and Nardi wheel are on :)
Picture not included in this copy12821955_922879461154202_1139755694_n by Tj Cruz, on Flickr
And went a tad bit lower. Still no rubbing and I'm really satisfied with this height (for now) haha! Really feel like at this height I can drive her almost anywhere!
Picture not included in this copy12825436_922879561154192_1831203159_n by Tj Cruz, on Flickr
Quick release and Nardi wheel are on :)
Picture not included in this copy12821955_922879461154202_1139755694_n by Tj Cruz, on Flickr
And went a tad bit lower. Still no rubbing and I'm really satisfied with this height (for now) haha! Really feel like at this height I can drive her almost anywhere!
Picture not included in this copy12825436_922879561154192_1831203159_n by Tj Cruz, on Flickr
Nice. Love aftermarket steering wheels, but the airbag always makes me second guess.
hahaha nice cheesing. and I like the "for now".......i know the feels. 😆Originally Posted by TerenceCruz ↑Update:
And went a tad bit lower. Still no rubbing and I'm really satisfied with this height (for now) haha! Really feel like at this height I can drive her almost anywhere!
Picture not included in this copy12825436_922879561154192_1831203159_n by Tj Cruz, on Flickr
Hell yeah !
Thanks man! I did too but my girlfriend bought me the quick release so I HAD to do it.. She's a keeper 🙄Originally Posted by ern-diz ↑Nice. Love aftermarket steering wheels, but the airbag always makes me second guess.
Lmao derp boyz forever.Originally Posted by tadakun ↑hahaha nice cheesing. and I like the "for now".......i know the feels. 😆
Thanks homie!Originally Posted by sarap ↑Hell yeah !
Update: Switched up the suede nardi 330mm for a leather nardi 360mm. I feel like it's a much better fit for the car, and it feels a lot better too!
Picture not included in this copy12825178_925717107537104_1665968507_n by Tj Cruz, on Flickr
Picture not included in this copy12067756_925717080870440_1449194886_n by Tj Cruz, on Flickr
Picture not included in this copy12825178_925717107537104_1665968507_n by Tj Cruz, on Flickr
Picture not included in this copy12067756_925717080870440_1449194886_n by Tj Cruz, on Flickr
Ha, no doubt!Originally Posted by TerenceCruz ↑Thanks man! I did too but my girlfriend bought me the quick release so I HAD to do it.. She's a keeper 🙄
make me want to change up the wheel so bad...