CTScottOriginal postUSA, CT · Nov 15, 2011#1I recently obtained the wiring diagrams for the 2012 Yaris. Much of the wiring and connectors remain the same as the second generation Yaris. This is the case for cruise control, so 2012 Yaris owners can DIY cruise control using the same OEM stalk.
For the 2012 the wiring is the same as that of the 2009-2011 Yaris, where the wiring from the ECM to the steering column is (theoretically) there. Also, the 2012 Yaris has the cruise control "On" and "Set" indicators built into the instrument cluster.
For those with the steering wheel audio controls the spiral cable connector, under the airbag, is a 10 pin connector, instead of a 4 pin connector (like those without steering audio controls and that of the 2006-2011 Yaris).
Picture not included in this copy Those with the audio controls will need to transfer the two cruise control pins (in positions 1 and 2) from the 4 pin cruise control stalk wire to their 10 pin spiral cable connector (in positions 1 and 2).
The procedure for removing the steering wheel airbag is a little different for the 2012, where three clips secure the airbag to the steering wheel (rather than 2 screws like the 2006-2011 Yaris).
Picture not included in this copy Also, for the 2012, the lower steering wheel cover has a separate removable cover section for where the cruise stalk goes through, called the "lower no. 2 steering wheel cover"
Picture not included in this copy If someone from the Connecticut area is interested in adding cruise control to their 2012 Yaris, I have the parts and would be more than willing to help to give me the opportunity to document the process and update my Cruise Control DIY.
3 attachments not included in this copy
Replies 278
ShinareOklahoma City, OK · Nov 15, 2011#2Ewe Rok!!!
Chuck GThe Great Northwest · Nov 15, 2011#3 Originally Posted by
Shinare ↑ Ewe Rok!!!
absolutely!!
bs_anegreece · Dec 3, 2011#4can you give more details about ,how we can make the cruise control???
CTScottThread starterUSA, CT · Dec 3, 2011#5 Originally Posted by
bs_ane ↑ can you give more details about ,how we can make the cruise control???
Below is the link to my DIY for 2006-2011 US and Canadian Yaris. For the second generation Yaris it was very easy to add cruise control to US and Canadian Yaris, since the ECM had the function built in.
For European Yaris it was not built in, so a complete aftermarket system was necessary. My understanding for the new third generation European Yaris is that cruise control is now an option.
DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation bronsinnj · Dec 4, 2011#6The cc mod on my 09 Yaris is still going strong! Plus I get chops when I tell people cc is built into the ECM.
I just bought a 2001 Corvette and of course it has the stalk cc.
I much prefer the four buttons on my dash on the Yaris!
CTScottThread starterUSA, CT · Dec 8, 2011#7 Originally Posted by motoman740 ↑
Hello, this is my first post here in yaris world. I just purchased a 2012 yaris. I dont have any radio buttons on the steering wheel. I assume I have the 4 pin connector, so everything should plug in and work? Also, where do I get the parts to do the cruise control mod?
I have the stalk with wiring and mounting screws available for $40 shipped. I shipped a set to mr9865 on here, but he just picked his 2012 up yesterday, so I don't think he's gotten around to testing it out yet.
mr9865Green Bay WI · Dec 8, 2011#8thinking about doing it now!
CTScottThread starterUSA, CT · Dec 8, 2011#9 Originally Posted by
mr9865 ↑ thinking about doing it now!
Hopefully you have a camera handy with decent macro capability, so we can document the 2012 install.
mr9865Green Bay WI · Dec 8, 2011#10I can if i find batteries
mr9865Green Bay WI · Dec 9, 2011#11looks like this is above my head. cant even find the airbag clips
CTScottThread starterUSA, CT · Dec 9, 2011#12 Originally Posted by
mr9865 ↑ looks like this is above my head. cant even find the airbag clips
If you pop off the little cover on the side of the steering wheel, you should be able to take a peek inside to get a better feel for where the clips are.
CTScottThread starterUSA, CT · Dec 9, 2011#13 Originally Posted by motoman740 ↑
Sounds pretty straight forward:
Indeed. the tricky thing is just figuring out the airbag removal, as it is different from the 2nd gen Yaris, with the clips instead of screws.
With the light piece that you mentioned above, I think you meant SRS, not ABS light. But, if you disconnect and reconnect the airbag connectors with the battery disconnected the SRS will not log a DTC and turn the light on. If you were to do it with power, or connect the battery to test the cruise before reconnecting the airbag, then you would get the SRS light.
CTScottThread starterUSA, CT · Dec 9, 2011#14 Originally Posted by motoman740 ↑
Good to know.
Also, I was looking at the steering wheel yesterday and I think the clips just hold it in place, and all you need to do is pull the thing straight out.
I think that the clips are holding against a groove in a plastic rod. This is the only other image from the service manual, and it looks like those three plastic rods are positioned where the other image shows to press the clips:
Picture not included in this copy1 attachment not included in this copy
mr9865Green Bay WI · Dec 9, 2011#15Its just that the base airbag is a little different than the one in your diagrams
CTScottThread starterUSA, CT · Dec 9, 2011#16 Originally Posted by
mr9865 ↑ Its just that the base airbag is a little different than the one in your diagrams
I see that now. This is a picture that I snapped when I test drove a 2012 base. Unfortunately with the sales guy breathing down my neck, I wasn't able to poke around as much as I would have liked to. The 2012 base airbag cover looks a whole lot like the 06-11.
Look on the sides of of the lower steering wheel cover for the two holes, where the Torx screws would be on a 06-11.
Picture not included in this copy1 attachment not included in this copy
CTScottThread starterUSA, CT · Dec 9, 2011#17Thanks for snapping those pics. Even on the 09-11 the CC lights don't light up with the ignition, but they do work once the stalk is in, so I am sure that the 2012 is the same.
CENTRALDMsouth africa · Dec 18, 2011#18 Originally Posted by
CTScott ↑ I recently obtained the wiring diagrams for the 2012 Yaris. Much of the wiring and connectors remain the same as the second generation Yaris. This is the case for cruise control, so 2012 Yaris owners can DIY cruise control using the same OEM stalk.
For the 2012 the wiring is the same as that of the 2009-2011 Yaris, where the wiring from the ECM to the steering column is (theoretically) there. Also, the 2012 Yaris has the cruise control "On" and "Set" indicators built into the instrument cluster.
For those with the steering wheel audio controls the spiral cable connector, under the airbag, is a 10 pin connector, instead of a 4 pin connector (like those without steering audio controls and that of the 2006-2011 Yaris).
Attachment 44502
Those with the audio controls will need to transfer the two cruise control pins (in positions 1 and 2) from the 4 pin cruise control stalk wire to their 10 pin spiral cable connector (in positions 1 and 2).
The procedure for removing the steering wheel airbag is a little different for the 2012, where three clips secure the airbag to the steering wheel (rather than 2 screws like the 2006-2011 Yaris).
Attachment 44503
Also, for the 2012, the lower steering wheel cover has a separate removable cover section for where the cruise stalk goes through, called the "lower no. 2 steering wheel cover"
Attachment 44504
If someone from the Connecticut area is interested in adding cruise control to their 2012 Yaris, I have the parts and would be more than willing to help to give me the opportunity to document the process and update my Cruise Control DIY.
I bought new yaris 2012 in South Africa and i want install cruise control. where can I get all the spare parts?The car has got all the radio bluetooth buttons on steering wheel. Can you help me. I dont want to install aftermarket unit.
CTScottThread starterUSA, CT · Dec 18, 2011#19 Originally Posted by
CENTRALDM ↑ I bought new yaris 2012 in South Africa and i want install cruise control. where can I get all the spare parts?The car has got all the radio bluetooth buttons on steering wheel. Can you help me. I dont want to install aftermarket unit.
Hopefully I can help. The first question is if the ECM on your Yaris has the cruise control function built in. If you could PM me the VIN number of your car, I can run it through the international EPC to see if it does.
CENTRALDMsouth africa · Dec 19, 2011#20Where can I contact you to get the spare parts. From which model can I bought it? Please help? Danie from South Africa.
CTScottThread starterUSA, CT · Dec 19, 2011#21 Originally Posted by
CENTRALDM ↑ Where can I contact you to get the spare parts. From which model can I bought it? Please help? Danie from South Africa.
I PMed you back regarding some additional information that I will need to determine if the ECM on your Yaris has the cruise control function built in.
CTScottThread starterUSA, CT · Jan 24, 2012#22I'm still looking for someone around the Connecticut area that is interested in having cruise control installed on their 2012 Yaris.
I shipped a stalk to a gentleman from South Africa, who successfully installed it on his Yaris, but he had a tough time with figuring out how to remove the airbag. I believe that from the pictures that he sent me, that I now have a good grasp of how to do so, but I would like to get it documented to make it easy for anyone who wants to DIY cruise control to do so.
CrandallNo Funswick · Jan 25, 2012#23Scott; do you think the clockspring from the 2012's would work in the previous generation? I would love to have cruise and audio controls.
CTScottThread starterUSA, CT · Jan 25, 2012#24 Originally Posted by
Crandall ↑ Scott; do you think the clockspring from the 2012's would work in the previous generation? I would love to have cruise and audio controls.
My bet is that it will fit and it does have the extra wires necessary to allow for both cruise and steering wheel controls.
CrandallNo Funswick · Jan 27, 2012#25 Originally Posted by
CTScott ↑ My bet is that it will fit and it does have the extra wires necessary to allow for both cruise and steering wheel controls.
I guess I'll have to order one and see if it indeed does.
12BusYarisTexas · May 19, 2012#26I shot a few photos showing the pins and how to access them to remove the air bag/horn button. Just a note - I turned the steering wheel for easier access to the pins (thus photos show upside down). I never diconnected the airbag as it will rest on the steering wheel and allow easy access to install the stalk and connections.
Jay
4 attachments not included in this copy
richard_rspAtlanta, GA · May 19, 2012#27Thank You! Those pictures help dramatically in understanding the process and the method for accessing the pins! I got mine in the mail earlier today and will let everyone know how it goes! :)
EDIT: Ok, just went and installed mine on my 2012 Yaris L. VERY EASY. Bad news: It doesn't work. The Green light comes on, however, it will not set at a speed. I have a distinct feeling that the clutch switch is not on the 2012 Yaris L... I looked under the dash and did not see a switch, except for the starter safety switch; there was only a bolt to stop the clutch from coming up.
EDIT 2: Ok, I have confirmed that my 2012 Yaris L (3-door) does NOT have the cruise control clutch switch. All of the wiring is there (including the harness connector) but the actual switch is absent. I was able to jump the pins on the connector (THanks CTScott!) and the cruise worked fine. So, if anybody is adding cruise control to their 2012 Yaris L (Manual Tranny, of course), it looks like we will need to install the clutch switch. (Hey, at least all the wiring is there! :-) )
Also turned the wheel upside down for better access
Picture not included in this copy
3 Clips
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Here is under the dash where the "clutch switch" should be
Picture not included in this copy
CTScottThread starterUSA, CT · May 20, 2012#28Thanks for all of the pictures gentlemen! This will now allow me to put together a proper step by step DIY for the 2012.
SlasherJawgia · Jun 4, 2012#29Thanks CTScott,🙇
The pics of the airbag clips made it super simple!!! I only had one real problems and that was removal/install of the horn pin on the old 4 pin connector... I broke it!!! I tried to force it!!! It's ALL MY OWN FAULT!!!! The removing the pin was almost impossible as there isn't a pin unlock like anything in the picture...
Well except for not having a horn, it works great on my 2012 3dr L 5spd👍
Also the lower dash panel under the steering wheel has an airbag, so that meant getting down on the ground and contorting myself to look under but the clutch switch was really easy to instal. The biggest bear was trying to pull off the tape from the harness to drop the connection for the clutch switch...
I just got back from the test drive and a refill... So 2 tanks and I am averaging 41.6 mpg I am pleased as I am still running 32psi in the tires and running A/C!!!
I am sure the CC will make the commute more tolerable... The aero hubcaps are enroute... And the next upgrade will be the speakers...
CTScottThread starterUSA, CT · Jun 4, 2012#30 Originally Posted by
Slasher ↑ Thanks CTScott,🙇
The pics of the airbag clips made it super simple!!! I only had one real problems and that was removal/install of the horn pin on the old 4 pin connector... I broke it!!! I tried to force it!!! It's ALL MY OWN FAULT!!!! The removing the pin was almost impossible as there isn't a pin unlock like anything in the picture...
Well except for not having a horn, it works great on my 2012 3dr L 5spd👍
Also the lower dash panel under the steering wheel has an airbag, so that meant getting down on the ground and contorting myself to look under but the clutch switch was really easy to instal. The biggest bear was trying to pull off the tape from the harness to drop the connection for the clutch switch...
I just got back from the test drive and a refill... So 2 tanks and I am averaging 41.6 mpg I am pleased as I am still running 32psi in the tires and running A/C!!!
I am sure the CC will make the commute more tolerable... The aero hubcaps are enroute... And the next upgrade will be the speakers...
I apologize for the broken pin issue. For 2006-2011 Yaris I ship the harness with the horn wire installed. After the last couple of 2012 installs I didn't think that I needed to include it, as the horn wire was on the other connector, but as it turns out that is only for 2012's with steering wheel audio controls. For ones without the horn wire is still on the 4 pin connector where the cruise control connects through.
SlasherJawgia · Jun 4, 2012#31 Originally Posted by
CTScott ↑ I apologize for the broken pin issue. For 2006-2011 Yaris I ship the harness with the horn wire installed. After the last couple of 2012 installs I didn't think that I needed to include it, as the horn wire was on the other connector, but as it turns out that is only for 2012's with steering wheel audio controls. For ones without the horn wire is still on the 4 pin connector where the cruise control connects through.
Scott,
I am happier than a pig in poop!!! I should have been able to do it, but these Yota pins are unlike many of the pins I've messed with... It looked simple, but I am sure there's a trick to em...
Frank NecrosisYoungstown, Oh · Jun 14, 2012#32Ordered the parts from CTScott, got them quickly.
The install was relatively simple. It took me about 15 minutes. Everything works perfectly.
Thanks CTScott!!!!
stuart_fOxford · Jul 10, 2012#33Also ordered from CTScott and got the parts in UK very quickly and no customs issues (despite USPS tracking saying the package is still in USA!)
I notice my steering wheel assembly is slightly different from Richard_RSP's (but thank you for the pictures that helped a lot in knowing what I was aiming for.
I have the steering wheel audio and also the bluetooth telephone control on my UK Spec 2012, 1.33 Yaris TR Auto (not sure which bit of that means I have the different clips though!)
Also, pin 1 & 2 of the 10-pin connector are already occupied so I put the cruise in the spare 4-pin socket next to it.
Edit- It works!
4 attachments not included in this copy
CTScottThread starterUSA, CT · Jul 20, 2012#34Excellent! I am glad to see that the installation went well.
macolocoMadrid, SPA · Aug 23, 2012#35hi...i'm just reading all posts, but i have a question..
are you always talking about 1.33 VVTI, right?
is it possible to have cruise control in a 1.4 D4D 2012 yaris ??
CTScottThread starterUSA, CT · Aug 23, 2012#36 Originally Posted by
macoloco ↑ hi...i'm just reading all posts, but i have a question..
are you always talking about 1.33 VVTI, right?
is it possible to have cruise control in a 1.4 D4D 2012 yaris ??
Correct - According the the wiring diagrams for the European Yaris, only the Yaris with the 1NR-FE (1.33L) support OEM cruise control. Ones with the D4D would need an aftermarket cruise control solution.
macolocoMadrid, SPA · Aug 24, 2012#37Thank u very much....
Its a pity....:(
b20vtegmaricopa, az · Aug 24, 2012#38hey there scott, got anymore stalks left? i'd love to pick one up from ya...
CTScottThread starterUSA, CT · Aug 24, 2012#39 Originally Posted by
b20vteg ↑ hey there scott, got anymore stalks left? i'd love to pick one up from ya...
I sure do. I'll PM you the details.
JamusSouthern WV · Aug 24, 2012#40I'm working on installing the 2-button cruise control on my 2012 L automatic. I am having trouble identifying the correct wires to connect to. On the 06-11 D3 plug there is a black wire, and then a blue and brown wire if you have the correct wiring to the computer. Here's a pic I took from under my steering column. If I were to assume, I'd say it's still the brown and blue wires on the plug next to the yellow one. But I'd rather double check with you guys who know.
Link to the type of cruise control mod I'm using.
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag1 attachment not included in this copy
CTScottThread starterUSA, CT · Aug 24, 2012#41 Originally Posted by
Jamus ↑ I'm working on installing the 2-button cruise control on my 2012 L automatic. I am having trouble identifying the correct wires to connect to. On the 06-11 D3 plug there is a black wire, and then a blue and brown wire if you have the correct wiring to the computer. Here's a pic I took from under my steering column. If I were to assume, I'd say it's still the brown and blue wires on the plug next to the yellow one. But I'd rather double check with you guys who know.
Link to the type of cruise control mod I'm using.
DIY - 2009 Cruise Control for $10, without pulling the steering wheel and airbag
For the 2012, the CCS wire (formerly blue) is now beige and the ground wire (formerly brown) is still brown. They are the two left most wires on the black connector to the left of the yellow airbag connector.
JamusSouthern WV · Aug 24, 2012#42Awesome, thank you very much. I never would have guessed it to be the black plug.
JamusSouthern WV · Aug 25, 2012#43Well, I tried to hook this up with no result. I'm partially color blind so maybe I could have the wrong wires. Is there a diagram of the black plugs pins somewhere? Is there a black wire, or a dark brown?
CTScottThread starterUSA, CT · Aug 25, 2012#44 Originally Posted by
Jamus ↑ Well, I tried to hook this up with no result. I'm partially color blind so maybe I could have the wrong wires. Is there a diagram of the black plugs pins somewhere? Is there a black wire, or a dark brown?
This is the connector drawing (view is looking into the holes where the connector would plug into the clockspring). Pin 1 (beige) is the CCS pin, which goes to the ECM. Pin 2 (Brown) is the ground wire.
Picture not included in this copy1 attachment not included in this copy
JamusSouthern WV · Aug 25, 2012#45Thanks for the quick response, and expert electrical knowledge. I used a micro pot instead of resistors. That shouldn't be a problem should it?
CTScottThread starterUSA, CT · Aug 26, 2012#46 Originally Posted by
Jamus ↑ Thanks for the quick response, and expert electrical knowledge. I used a micro pot instead of resistors. That shouldn't be a problem should it?
The problem with potentiometers is that depending on the construction they can drift. Also, depending on the range of the pot, the under 1K area of the pot can be very small, making it difficult to lock in the correct values.
JamusSouthern WV · Aug 31, 2012#47Just wanted to let everyone know I got it working and it's great. I probably ran into every problem that one might run into, but with quick help from CTScott I was put back on the right track. Thanks again Scott, and the forum as a whole.
PierreGmarquette, mi · Nov 20, 2012#48Got the cruise stalk in my 2012 3dr., but does anyone know where there is a tutorial to get at the clutch switch?
CTScottThread starterUSA, CT · Nov 20, 2012#49 Originally Posted by
PierreG ↑ Got the cruise stalk in my 2012 3dr., but does anyone know where there is a tutorial to get at the clutch switch?
The clutch switch on the 2012 is just like the 2nd gen. Look at the top of the clutch pedal and you will see a bolt threaded into the frame, with a stop nut where it meets the frame. Remove that bolt and install the CC clutch switch in its place. The switch should be adjusted to where it is fully pressed in when the clutch pedal is not depressed and, where as soon as you touch the pedal the switch is no longer pressed.
Picture not included in this copy1 attachment not included in this copy
stuart_fOxford · Dec 28, 2012#50Hi Danieldk,
Have a look at post 37. I have the paddles and had the same issue with getting to the 2 clips at the top of the wheel.
What you have to do is use the hole to push the bottom clip which should release part of the airbag. There are no other holes to get to the other clips so you have to get to them through the gap you create when you release the first clip.
The major thing you have to notice is that the bottom clip (the one you get to through the hole) needs you to
push the clip to release it, the other 2 need you to
pull. I used a small ring-ended spanner to pull the other clips and release them.
Let me have a go in paint and try and illustrate what you need to do:
Step 1 - push the first pin through the hole with a flat screwdriver. It's the yellow arrow.
Step 2+3 - pull the far away end of the second and third clip towards you. These are circled red in the diagram (sorry about the cables being in the way on the photo of the lower clip but it's just the same as the upper one)
1 attachment not included in this copy