Does your Yaris have the 1.33 L engine?Originally Posted by marspike ↑Hello Everyone,
Since I've installed an used switch cruise control on my second Yaris 2013. Led cruise control cluster blinking (https://youtu.be/055DBpCVR6A ) . Does I need change stalk cruise crontol ? Or does exist something to fix it ?
Thanks for your help.
DIY Cruise Control for 2012 Yaris - Good News!
279 posts · 466,057 views · page 5 of 6
Replies continued
Hello Mr Scott,Originally Posted by CTScott ↑Does your Yaris have the 1.33 L engine?
Thanks for your prompt reply.
Hum I believe that's it. It's a manual 99 horses power vvti. I put on a Verso-s (Ractis, NSP120 100VVTI same engine and manual transmission)
switch cruise control find on car's mum to new yaris. Light blinking. Verso-s is little more largest car based on yaris chassis. Some pieces can be able the Yaris 2012 that's dealer have said.
A second try with switch cruise control on my first yaris 2013 D4d and light blinking yet.
Does the problem come from the multiplex whose doesn't support additional plugging?
Or any stalk cruise control can be fix this problem?
Only the 1.33L Yaris has built in cruise control. The 1.0L and 1.4L D4D do not.Originally Posted by marspike ↑Hello Mr Scott,
Thanks for your prompt reply.
Hum I believe that's it. It's a manual 99 horses power vvti. I put on a Verso-s (Ractis, NSP120 100VVTI same engine and manual transmission)
switch cruise control find on car's mum to new yaris. Light blinking. Verso-s is little more largest car based on yaris chassis. Some pieces can be able the Yaris 2012 that's dealer have said.
A second try with switch cruise control on my first yaris 2013 D4d and light blinking yet.
Does the problem come from the multiplex whose doesn't support additional plugging?
Or any stalk cruise control can be fix this problem?
Picture not included in this copy
Everything perfect and for me.special thanks to Gagi
Sent from my iPad using Tapatalk
Everything perfect and for me.special thanks to Gagi
Sent from my iPad using Tapatalk
hi guys,
my first post ever on a car forum.
purchased my first ever yaris which I'm so pleased with. desperate to have the cruise control on the car so i purchased it from eBay for like £19.
its arrived, i removed the air bag, connected the stalk and the connector into the unused four pin slot on the right of the ten pin connector.
set everything back up, and the cruise light won't come on. I'm so upset. please tell me what it could be!
my engine code is 1KFR.
its a 1litre petrol manual
2012 plate
has the touch and go system with the bluetooth call buttons on the right of the steering wheel aswell.
awaiting your expert advice!
thanks
my first post ever on a car forum.
purchased my first ever yaris which I'm so pleased with. desperate to have the cruise control on the car so i purchased it from eBay for like £19.
its arrived, i removed the air bag, connected the stalk and the connector into the unused four pin slot on the right of the ten pin connector.
set everything back up, and the cruise light won't come on. I'm so upset. please tell me what it could be!
my engine code is 1KFR.
its a 1litre petrol manual
2012 plate
has the touch and go system with the bluetooth call buttons on the right of the steering wheel aswell.
awaiting your expert advice!
thanks
Originally Posted by Kiran ↑hi guys,
my first post ever on a car forum.
purchased my first ever yaris which I'm so pleased with. desperate to have the cruise control on the car so i purchased it from eBay for like £19.
its arrived, i removed the air bag, connected the stalk and the connector into the unused four pin slot on the right of the ten pin connector.
set everything back up, and the cruise light won't come on. I'm so upset. please tell me what it could be!
my engine code is 1KFR.
its a 1litre petrol manual
2012 plate
has the touch and go system with the bluetooth call buttons on the right of the steering wheel aswell.
awaiting your expert advice!
thanks
Only the 1.33L European Yaris have cruise control built into the ECM. Your car does not, so the kit will not work. You would need a complete aftermarket solution to have cruise control on your car.
the hybrid yaris has built for cruise control?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Originally Posted by panayiotis ↑the hybrid yaris has built for cruise control?
Sent from my iPhone using Tapatalk
Yes. The hybrid does have cruise control built in.
Hello CTScott, i own a 2012 yaris with 1nr-fe engine and 6-speed manual transmission. My steering wheel has both audio and bluetooth buttons and today i installed the cruise control stalk with no success. i plugged the 4-pin connector in the empty slot next to the 10-pin connector but the light does not come on when i press the on- off button. The only difference i noticed from the previously posted photos is that the airbag has only one orange connector, not two. Everything else looks the same. Any idea?
Yes. As mentioned many times in this thread - The only European Yaris which have cruise control functionality built in are ones with the 1.33 L engine. Your Yaris does not have that engine and therefore does not have cruise control capability.Originally Posted by nikotroyota ↑Hello CTScott, i own a 2012 yaris with 1nr-fe engine and 6-speed manual transmission. My steering wheel has both audio and bluetooth buttons and today i installed the cruise control stalk with no success. i plugged the 4-pin connector in the empty slot next to the 10-pin connector but the light does not come on when i press the on- off button. The only difference i noticed from the previously posted photos is that the airbag has only one orange connector, not two. Everything else looks the same. Any idea?
My CC-light to not working, but otherwise CC works flawless :) You must test on the road.
Thank you for your fast replies but my engine IS the 1,33 L variant- 1329 cc to be exact. This is why I am confused. I did not know that this could be the case meaning the cruise control can work at the same time the light remains unlit. Has anyone else experience the same situation?
hey everyone!
I am from greece, i have a french made yaris 2012, 1.3.
I installed ebay oem cruise control stalk , the clutch switch is already in place.
But it does not work :( .
No light comes on when pressing the on/off , nothing happens if i try to test it while driving.Is there any fuse i should check? i have read the entire thread ,but i did not find anything usefull.
Any help is appreciated!
I am from greece, i have a french made yaris 2012, 1.3.
I installed ebay oem cruise control stalk , the clutch switch is already in place.
But it does not work :( .
No light comes on when pressing the on/off , nothing happens if i try to test it while driving.Is there any fuse i should check? i have read the entire thread ,but i did not find anything usefull.
Any help is appreciated!
Interesting that both of the Greek 1.33 are not working. Can either of you give me the part number of your ECM (engine computer)?Originally Posted by neofitos ↑hey everyone!
I am from greece, i have a french made yaris 2012, 1.3.
I installed ebay oem cruise control stalk , the clutch switch is already in place.
But it does not work :( .
No light comes on when pressing the on/off , nothing happens if i try to test it while driving.Is there any fuse i should check? i have read the entire thread ,but i did not find anything usefull.
Any help is appreciated!
Originally Posted by CTScott ↑Interesting that both of the Greek 1.33 are not working. Can either of you give me the part number of your ECM (engine computer)?
#update
just came back from my night shift and i had the chance to try it again in open road. Cruise control works fine , i made mistake with on/off and clicking the set button the fist time yesterday.
the cc light does not work though. i guess there is no way of fixing it, right?
hello ctscott, i would like to add cruise control to my u.s. spec, french made, 2014 yaris L, 1.5 engine, auto trans, that is my southwest snowbird car. i tried to pm you and also went to your f.b. page, both didnt go thru. can you advise how to order your kit? i will ask a local japanese specialty mechanic to do it for me. thanks!
a big public thank you to ctscott! your cruise control kit works fine in my 2014 L. highly recommended!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
Thanks for the instructions in this thread! Just got cruise working in my 2012 model
Hi where can i get steering button for my yaris 2012 to buy?
Thanks to Scott, his parts and his advice I got the cruise control in the wife's yaris in less time than it took to find the tools. And it works great! Thanks again Scott!!
Hi CTScott, I tried PMing you but it didn't appear to have gone through. I wanted to add CC to my US 2016 Yaris L. Do you sell a kit for this? Please PM me with details, thanks!
Hey Scott, I have been inspired by your amazing forum and I was wondering if you still were selling kits. I have a 2012, 3 door, hatch, manual and was wanting to add cc to it!
Please message me if you are still selling.
Thanks for all your hard work, CS 🤘
Please message me if you are still selling.
Thanks for all your hard work, CS 🤘
I tried PM'ing him too and haven't heard back. Hopefully things are ok.
He must be busy because I recieved a PM from him but I PM'd back and haven't heard anything. I think for some reason this forum's software won't show whether or not a msg is sent. Hopefully I hear back soon. I drive 23,000 miles a year and my right leg is killing me!
I just bought a "new" 2017 yaris here on Mexico... It came from Thailand... I try to install a cruise control. The Vin start with MR.
I have a stale and wire... Picture not included in this copy
Enviado desde mi SM-G935F mediante Tapatalk
I have a stale and wire... Picture not included in this copy
Enviado desde mi SM-G935F mediante Tapatalk
I hope CTScott can help mePicture not included in this copyPicture not included in this copyPicture not included in this copy
Enviado desde mi SM-G935F mediante Tapatalk
Enviado desde mi SM-G935F mediante Tapatalk
You can see the specs.. www.toyota.com.mx
My car is sedan core cvt Picture not included in this copy
Enviado desde mi SM-G935F mediante Tapatalk
My car is sedan core cvt Picture not included in this copy
Enviado desde mi SM-G935F mediante Tapatalk
I know that he has in the past. Is there a specific part of the install that isn't covered in the thread? I may be able to help with wiring diagrams if they aren't specifically covered.Originally Posted by Captain Yaris ↑Hi CTScott, I tried PMing you but it didn't appear to have gone through. I wanted to add CC to my US 2016 Yaris L. Do you sell a kit for this? Please PM me with details, thanks!
It looks like you don't have the connections in the clock spring. The two airbag wires and the small (4-pin?) connector are the only ones I can see at the top. You would have to get a new clock spring with the right connectors to pass the CC wires through to the harness, and maybe have to run all of the other wires (to the ECU, etc).Originally Posted by Eduardo_mty ↑I have a stale and wire... Picture not included in this copy
Here's one with the extra pins, pictures 4 and 5:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I got a hold of him via PM and he's helping me with the CC. I've been pretty busy, but I have to look for a connector above the clutch pedal to ensure I need a clutch switch. I've been paying attention to the user: Dodge Aries K, and he bought a 2016 L and had the CC put in. One of his posts mentioned that he'd need a clutch switch, so I'm sure I will too. On another note, when my engine bites the big one, I'll definitely be interested in a 2ZR swap. It looks so enticing! 🎉Originally Posted by CrankyOldMan ↑I know that he has in the past. Is there a specific part of the install that isn't covered in the thread? I may be able to help with wiring diagrams if they aren't specifically covered.
Yes, I needed the clutch switch. After that was installed it worked perfectly.
Thanks, that's what I seemed to gather from your experience. I can see the existing clutch switch to start the car, but where does the other switch go? it looks like there's a mounting location just on the other side of the existing switch, but I also can't locate the connector, unless they stuffed it way up under the dash. If that's the case, I may have to have one of my kids fish it out because there's no way I can contort myself.Originally Posted by Dodge Aries K ↑Yes, I needed the clutch switch. After that was installed it worked perfectly.
The switch in question replaces the pedal up stop bolt. Look where the clutch pedal sits when you're not pressing it.
can i use this https://www.aliexpress.com/item/High...e-b2f5a6af3066
Dear Friends!
Tell me known yaris sedan 2011with 1.3 /2NZFE engine, also Yaris sedan 2014 with 1.5 engine can be to installed CCS ? Thanks a lot!
Tell me known yaris sedan 2011with 1.3 /2NZFE engine, also Yaris sedan 2014 with 1.5 engine can be to installed CCS ? Thanks a lot!
Dear CTScott.
I m looking for pin ccs from ECM for vios\yaris sedan 2014-2015. Tell me pls
I m looking for pin ccs from ECM for vios\yaris sedan 2014-2015. Tell me pls
Hi I have yaris 2013 multidrive. Is it possible to add cruise control on it? Picture not included in this copy
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Installed cruise control and its working perfect. Along with cruise controlinstalled speed limitter but dont think that is working, may be im doing it wrong.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
Hi guys,
this is my first post inhere
I just fit the cc switch to my french made Yaris 2012 NSP130L 1.33L gasoline with 1NR-FE engine and 6 manual transmission, but the cruise light won't come on when switched ON.
has the radio touch system with the bluetooth call buttons on the right of the steering wheel aswell.
any advices please ?
this is my first post inhere
I just fit the cc switch to my french made Yaris 2012 NSP130L 1.33L gasoline with 1NR-FE engine and 6 manual transmission, but the cruise light won't come on when switched ON.
has the radio touch system with the bluetooth call buttons on the right of the steering wheel aswell.
any advices please ?
I just check the whole discussion above, 1.33L can support ccs, the 1.0 gasoline and 1.4 d4d does not
Installed cruise control stalk and it is working perfect. Along with that installed ASL switch in the steering wheel. But it is not working. Checked the connection in the back side of steering wheel and found a light green cable is there and both from ASL and this one are connected eachother (verified using multimeter).Picture not included in this copyPicture not included in this copyPicture not included in this copy
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk
i just picked up a 2017 Yaris L, US model made in France, need to add cruise.
I am also trying to add cruise control to my 2016 L. I am just about ready to order the parts. I have a manual so I need another switchbfor the clutch pedal. The parts I ordered and am going to install are:Originally Posted by AndreS123 ↑i just picked up a 2017 Yaris L, US model made in France, need to add cruise.
1) On/Off Switch/Stalk - 84632-08021
2) Clutch Switch - 88280-42010 (For a manual transmission)
3) Stalk Cover - 45186-0D150-C0
I found a decent price online at parts.conicellitoyotaofconshohocken.com. I plan on adding fog lamps later on and I only want to take off my steering wheel cover and airbag once so I am also ordering the headlamp switch which is: 84140-47161. Let me know how it goes for you. I’m planning on watching youtube to get my bearings on the install before attempting.
Hi all, I too would like to add cruise control to my 2012 1.33 six speed manual French built yaris.
What are the exact toyota part numbers that I will need, and when purchasing the stalk and cover, does it come with the small wiring loom for connecting it. And would anyone be able to tell me if I need the clutch switch for my car.
Also would anyone have a video of them installing it or a link to one?
Thanks.
Sent from my SM-N910F using Tapatalk
What are the exact toyota part numbers that I will need, and when purchasing the stalk and cover, does it come with the small wiring loom for connecting it. And would anyone be able to tell me if I need the clutch switch for my car.
Also would anyone have a video of them installing it or a link to one?
Thanks.
Sent from my SM-N910F using Tapatalk
Dear. If you have diagram connection ccs for manual transmit yaris 2016-2017. Share pleaseOriginally Posted by Captain Yaris ↑I am also trying to add cruise control to my 2016 L. I am just about ready to order the parts. I have a manual so I need another switchbfor the clutch pedal. The parts I ordered and am going to install are:
1) On/Off Switch/Stalk - 84632-08021
2) Clutch Switch - 88280-42010 (For a manual transmission)
3) Stalk Cover - 45186-0D150-C0
I found a decent price online at parts.conicellitoyotaofconshohocken.com. I plan on adding fog lamps later on and I only want to take off my steering wheel cover and airbag once so I am also ordering the headlamp switch which is: 84140-47161. Let me know how it goes for you. I’m planning on watching youtube to get my bearings on the install before attempting.
Show me ccs diagram connect for Manual transmission .( pin of ECm, clutch pedal..Originally Posted by bilucci ↑Hi guys,
this is my first post inhere
I just fit the cc switch to my french made Yaris 2012 NSP130L 1.33L gasoline with 1NR-FE engine and 6 manual transmission, but the cruise light won't come on when switched ON.
has the radio touch system with the bluetooth call buttons on the right of the steering wheel aswell.
any advices please ?
I have a US 2016 Yaris L. I popped the airbag off and to my suprise, no wire to connect to the switch and no screws to secure the switch. Do any of you know what the deal is? I thought these things are prewired for cruise control. Also does amyone know the screw size to secure the switch? Thanks!
3 attachments not included in this copy
gimme a minute.Originally Posted by Captain Yaris ↑I have a US 2016 Yaris L. I popped the airbag off and to my suprise, no wire to connect to the switch and no screws to secure the switch. Do any of you know what the deal is? I thought these things are prewired for cruise control. Also does amyone know the screw size to secure the switch? Thanks!
yeah im not finding a diagram on my GSIC 🤷
looks like a trade secret thing. just like how the lane departure etc have no diagrams online for spare parts.
Thanks for checking. Hopefully someone will have knowledge of my situation.
I put in a call to my service advisor because it dawned on me that possibly it didn’t get wired from the factory by mistake. I’ll follow up and advise as to what I find out.