Yarisworld Archive

DIY: 2006-2011 Yaris OEM Cruise Control Complete Installation

147 posts · 311,598 views · page 1 of 3

CTScottOriginal postUSA, CT · Mar 18, 2011#1
The 34 page PDF file below is a complete DIY for installing OEM Cruise Control on a 2006 to 2011 Yaris.

This will only work for US/Canda/Puerto Rico Yaris, as Yaris from all other areas lack the built-in ECM programming for Cruise Control. Vehicles from other areas must use an aftermarket cruise control system.


Any procedure that requires 34 pages of documentation may seem intimidating, but this installation is really not difficult. I tried to add as much detail as possible to clarify the parts where people who have installed cruise control have had questions.


This guide is broken up in to seven sections encompassing the following:

Section 1: OEM Cruise Control Stalk Installation.
Section 2: Steering Column Connector D3 Pin Installation
Section 3: ECM Connector A21 Pin Installation
Section 4: Connecting the ECM Pin to the Steering Column Pin Through the Firewall
Section 5: Cruise Control Clutch Switch Installation
Section 6: Optional Cruise Control Indicator Module Installation
Section 7: Verifying Operation

http://tinyurl.com/CruiseDIY

Replies 146

white_riceOntario, Canada · Mar 18, 2011#2
Thank you very much Scott. Doing the install tomorrow.
pennyracergrants pass · Mar 19, 2011#3
sorry scott but i did not see the price for the all the goodies i have 08 hatchback automatic and not need led indicater light set up just everything else can u help
swiddCentral Alabama, GOD BLESS AMERICA · Mar 19, 2011#4
pennyracer: at minimum you just need

the single wire that plugs into the ECM ($~20, order by part number from a dealership),

~10 ft of thin wire,

and any switch of your liking (4-way ($15+shipping), push-buttons ($3-10)).
.Kevin.Prince George, BC. Canada · Mar 19, 2011#5
How much does cruise control at the dealership even cost to have put on?
CTScottThread starterUSA, CT · Mar 20, 2011#6
Originally Posted by .Kevin. ↑
How much does cruise control at the dealership even cost to have put on?
The quotes that I have seen for Cruise installation by the dealer have been around $500. I am not sure if they are still doing so, but in the past for non-factory cruise control installation they always used the Rostra aftermarket system, rather than taking advantage of the ECM's built in functionality.
Bar_Red_YarisPuerto Rico, Oeste · Jan 6, 2012#7
PM sent =)
AlphaFox78Springfield, MA · Mar 27, 2013#8
scott, your mailbox is full
CTScottThread starterUSA, CT · Mar 27, 2013#9
Originally Posted by AlphaFox78 ↑
scott, your mailbox is full
Sorry about that - I just cleaned it up.
Sum1KoolGA · Mar 31, 2013#10
Do you still have one if these? Do you have the CC clutch switch?

Thank you.
joechCanada · Apr 11, 2013#11
I got the oem cruise stalk, pins and clutch switch from Scott. The parts got here so fast that I didn't have a chance to read the cruise DIY carefully. BTW Scott is great to deal with and he always willing to help if you run into any issue.

Install took about 2 1/2 hours and half the time was spent fishing the wires through the firewall. I ended up cutting a piece of coat hanger in order to fish the clutch switch wire above the clutch pedal. I also removed the battery since I couldn't figure out where the wire would come out. Once the wires got through the firewall the rest of the install was pretty straight forward. I did have a bit of a problem getting one of the pins into the D3 connector. But once the pins are properly in place, I went out for a quick drive and the cruise works like a charm. 👍

Thanks again Scott.

Joe
KubcatSydney Australia · Apr 19, 2013#12
First I would just like to say I have just found this forum and am very excited to find all this info. Thank you to everyone who contributes.

Does anyone know if this cruise control addition will work on a 2013 Yaris right hand drive 1.3 automatic built for the Australian market? Only the base model (ours) doesn't have cruise control and we would love to add it.

We also have a 2006 but it is not drive by wire and we don't want an aftermarket kit so if I can put it on the 2013, that will be the one we take on longer drives.
CTScottThread starterUSA, CT · Apr 19, 2013#13
Originally Posted by Kubcat ↑
First I would just like to say I have just found this forum and am very excited to find all this info. Thank you to everyone who contributes.

Does anyone know if this cruise control addition will work on a 2013 Yaris right hand drive 1.3 automatic built for the Australian market? Only the base model (ours) doesn't have cruise control and we would love to add it.

We also have a 2006 but it is not drive by wire and we don't want an aftermarket kit so if I can put it on the 2013, that will be the one we take on longer drives.


I have shipped cruise control parts to Australia for installation on 3rd generation Yaris with the 1.5L engine. I am not sure about it working on the Australian 1.3L, although it does work for the European 1.33L Yaris.
KubcatSydney Australia · Apr 20, 2013#14
Originally Posted by CTScott ↑
I have shipped cruise control parts to Australia for installation on 3rd generation Yaris with the 1.5L engine. I am not sure about it working on the Australian 1.3L, although it does work for the European 1.33L Yaris.
Well I am happy to be the tester.

I will PM you about how to get the parts.
DiagnosticCambridge UK · Apr 26, 2013#15
Hi Scott

I have a 2013 998cc UK 'Edition' (base model) Yaris and would love to fit cruise, is it possible to fit the ECM based kit to my car and if so do you supply the complete kit Scott?

All the best.....
CTScottThread starterUSA, CT · Apr 26, 2013#16
Originally Posted by Diagnostic ↑
Hi Scott

I have a 2013 998cc UK 'Edition' (base model) Yaris and would love to fit cruise, is it possible to fit the ECM based kit to my car and if so do you supply the complete kit Scott?

All the best.....
My understanding is that only the 1.33L 2012+ European Yaris supports cruise control. Do you know if cruise is offered as an option on any of the UK 998cc Yaris?
DiagnosticCambridge UK · Apr 27, 2013#17
Originally Posted by CTScott ↑
My understanding is that only the 1.33L 2012+ European Yaris supports cruise control. Do you know if cruise is offered as an option on any of the UK 998cc Yaris?
Unfortunately after contacting the main dealer today, they have said the 998cc is not equipped with cruise for the UK. If I were to fit an aftermarket cruise system it would affect my warranty. Well I'm not worried about that but am a little cost conscious, a Google search last night revealed the price is likely to be circa £500 ($750)
CTScottThread starterUSA, CT · Apr 27, 2013#18
Originally Posted by Diagnostic ↑
Unfortunately after contacting the main dealer today, they have said the 998cc is not equipped with cruise for the UK. If I were to fit an aftermarket cruise system it would affect my warranty. Well I'm not worried about that but am a little cost conscious, a Google search last night revealed the price is likely to be circa £500 ($750)
I have noticed as well that the aftermarket cruise control options for European Yaris are crazy expensive. I believe that the Rostra system, which was the dealer installed cruise control option for the US for 07-08 Yaris, will work on European Yaris, nut I have not had the opportunity to test the theory yet. The Rostra kits were about $250. I actually have one of the kits in my possession, and really need to coordinate doing some experimentation on one of my European trips.
DiagnosticCambridge UK · Apr 28, 2013#19
Originally Posted by CTScott ↑
I have noticed as well that the aftermarket cruise control options for European Yaris are crazy expensive. I believe that the Rostra system, which was the dealer installed cruise control option for the US for 07-08 Yaris, will work on European Yaris, nut I have not had the opportunity to test the theory yet. The Rostra kits were about $250. I actually have one of the kits in my possession, and really need to coordinate doing some experimentation on one of my European trips.


Now I'm really confused or dense; I've been assured the Rostra 250-1836 cruise stalk and the 250-4206 clutch switch will work with my car. I don't see how as its only the switches and a few wires, if the car is not pre-wired and configured theirs nothing smart for the cruise stalk to talk to. Is that right? Or am I both confused and dense? Perhaps this seller wants me to add gullible?

Information provided by: Kartronix- eBay item: 261180202724
CTScottThread starterUSA, CT · Apr 28, 2013#20
Originally Posted by Diagnostic ↑
Now I'm really confused or dense; I've been assured the Rostra 250-1836 cruise stalk and the 250-4206 clutch switch will work with my car. I don't see how as its only the switches and a few wires, if the car is not pre-wired and configured theirs nothing smart for the cruise stalk to talk to. Is that right? Or am I both confused and dense? Perhaps this seller wants me to add gullible?

Information provided by: Kartronix- eBay item: 261180202724
The Rostra 250-1836 definitely will not and the 250-4206 is just the clutch switch. It is the same as what I sell (but for much more money). The Rostra kit that I believe will work is the discontinued one that used a smaller stalk that mounted to the opposite side of the steering wheel and had a green LED on the stalk. That kit includes a control box that does the cruise control functionality (which your ECM lacks) and is does so by intercepting and overriding the throttle pedal signals.
ConrodLogan City Australia · May 4, 2013#21
I bought a cruse kit off CTScott for my 2012 1.3l Yaris and it worked perfectly and took me 20 minutes to install.

Conrod
Logan City
Queensland
Australia
CTScottThread starterUSA, CT · May 4, 2013#22
Originally Posted by Conrod ↑
I bought a cruse kit off CTScott for my 2012 1.3l Yaris and it worked perfectly and took me 20 minutes to install.

Conrod
Logan City
Queensland
Australia
Excellent! So, now we know that both 1.5L and 1.3L Australian 3rd generation Yaris support cruise control.
DiagnosticCambridge UK · May 5, 2013#23
Originally Posted by CTScott ↑
The Rostra 250-1836 definitely will not and the 250-4206 is just the clutch switch. It is the same as what I sell (but for much more money). The Rostra kit that I believe will work is the discontinued one that used a smaller stalk that mounted to the opposite side of the steering wheel and had a green LED on the stalk. That kit includes a control box that does the cruise control functionality (which your ECM lacks) and is does so by intercepting and overriding the throttle pedal signals.
Hi Scott. The now obsolete unit you mentioned above; do you have a model number and I'll try and locate one on FleaBay or alternatively perhaps you can provide the kit yourself?
Really, really want to have cruise on my 998cc
Regards
CTScottThread starterUSA, CT · May 5, 2013#24
Originally Posted by Diagnostic ↑
Hi Scott. The now obsolete unit you mentioned above; do you have a model number and I'll try and locate one on FleaBay or alternatively perhaps you can provide the kit yourself?
Really, really want to have cruise on my 998cc
Regards
I can work with you with the kit that I have. We just need to verify a couple of things to confirm my theory before I ship it. I will PM you my email so we can work directly on some photos that I will need.
KubcatSydney Australia · May 9, 2013#25
Originally Posted by CTScott ↑
Excellent! So, now we know that both 1.5L and 1.3L Australian 3rd generation Yaris support cruise control.
Just another confirmation that all worked well on an Australian spec 2013 1.3L automatic.

I did take photos but cant resize them to upload. Many photos on this site anyway so probably not going to add a lot of value by posting mine.

It was extremely easy, the airbag just popped out once the 3 pins were pushed in. I had disconnected the battery before removing the airbag and waited 10 minutes as was advised by a mechanic friend. All in all it took 20 minutes including the 10 minute battery wait and a call to the dealership to get the reprogramming code for the stereo. All plug and play, there was only one slot so couldn't get it wrong. All the functions and cruise control dash indicators work correctly.

The only thing that makes it look not factory is the cover plate that is removed for the cruise control stalk can't be reinstalled as is and there is a gap around it. A photo of a genuine one with a cutout would be nice so I could cut a hole in mine and make it look neater.
toyman162Australia · May 26, 2013#26
Originally Posted by CTScott ↑
I have shipped cruise control parts to Australia for installation on 3rd generation Yaris with the 1.5L engine. I am not sure about it working on the Australian 1.3L, although it does work for the European 1.33L Yaris.
G'day Scott,

I, too, am from Australia. I have a 2007 1.5 Auto Yaris, and am interested in your cruise control for my car. Do you know if the unit(s) you have sent to Australian owners have worked OK?
If so, how much are the parts shipped here?

Thanks,
John.
CTScottThread starterUSA, CT · May 26, 2013#27
Originally Posted by toyman162 ↑
G'day Scott,

I, too, am from Australia. I have a 2007 1.5 Auto Yaris, and am interested in your cruise control for my car. Do you know if the unit(s) you have sent to Australian owners have worked OK?
If so, how much are the parts shipped here?

Thanks,
John.
They have worked for 2012 and newer Yaris, but I am fairly certain that they will not work for 2006-2011 Australian Yaris.
CueBallUtah · May 29, 2013#28
Originally Posted by CTScott ↑
...I am not sure if they are still doing so, but in the past for non-factory cruise control installation they always used the Rostra aftermarket system, rather than taking advantage of the ECM's built in functionality.
That's just dumb.. I bought the kit, (from Scott) had it installed in about an hr, and it works beautifully! 👏 Dont know why they wouldnt use the built in feature.
PolitronicsMcArthur, CA · Jul 8, 2013#29
HI! I just got a used 2009 Yaris Manual Tranny Hatchback, California car. I have seen some threads about Cal cars no being prepped for the CC. They seem to say that those 2009 and newer are. Can anyone confirm this?

Thanks!

JP
guitarchaos64United States · Oct 5, 2013#30
hi scott,
i just bought a 2012 yaris and would like to install cruise control on it. i live in arizona. can i buy the parts from you?
CTScottThread starterUSA, CT · Oct 5, 2013#31
Originally Posted by guitarchaos64 ↑
hi scott,
i just bought a 2012 yaris and would like to install cruise control on it. i live in arizona. can i buy the parts from you?
Yes. PM sent.
jackabMoab, UT · Jan 2, 2014#32
Hi Scott, I have a 2011 Yaris Hatchback, MT, and have been trying to install a Rostra cruise control. I've put in the 250-1836 and the clutch switch. It seems I don't need the ECM hookups and have not put them in. The light comes on at my dash, but the cruise control doesn't work. It sounds like I should just toss it and buy yours. If so, would you want all of this Rostra stuff? Any other tips? Thanks for being out there! Wish I'd found you before messing with Rostra!
CTScottThread starterUSA, CT · Jan 2, 2014#33
Originally Posted by jackab ↑
Hi Scott, I have a 2011 Yaris Hatchback, MT, and have been trying to install a Rostra cruise control. I've put in the 250-1836 and the clutch switch. It seems I don't need the ECM hookups and have not put them in. The light comes on at my dash, but the cruise control doesn't work. It sounds like I should just toss it and buy yours. If so, would you want all of this Rostra stuff? Any other tips? Thanks for being out there! Wish I'd found you before messing with Rostra!
If the cruise symbol lights up, then you are good for the ECM connection. If your can't get the "SET" light to come on (and the cruise to actually work), then the clutch switch may not be installed correctly.

The clutch switch needs to be fully depressed when the clutch pedal is not touched in order for cruise to work. If you installed the switch in too far, then it will not actuate when the clutch is at rest and therefore will not allow cruise to work.

The Rostra 250-1836 kit is essentially identical to what I sell, but for a whole lot more money. (The older kits were a custom Rostra product, but the new ones are just the OEM switch, etc.)
jackabMoab, UT · Jan 3, 2014#34
Originally Posted by CTScott ↑
If the cruise symbol lights up, then you are good for the ECM connection. If your can't get the "SET" light to come on (and the cruise to actually work), then the clutch switch may not be installed correctly.

The clutch switch needs to be fully depressed when the clutch pedal is not touched in order for cruise to work. If you installed the switch in too far, then it will not actuate when the clutch is at rest and therefore will not allow cruise to work.

The Rostra 250-1836 kit is essentially identical to what I sell, but for a whole lot more money. (The older kits were a custom Rostra product, but the new ones are just the OEM switch, etc.)
I checked the clutch, and it looked like the clutch pedal was depressing it enough, but I extended it a bit more anyway. The cruise control still didn't work. I removed the clutch switch wires and went for another drive. Cruise control still didn't work even though the cruise control dash came on. When installing the kit, it seemed too simple an installation for the cruise control to actually work. Does the device send radio signals to the ECM to tell it what to do?
CTScottThread starterUSA, CT · Jan 3, 2014#35
Originally Posted by jackab ↑
I checked the clutch, and it looked like the clutch pedal was depressing it enough, but I extended it a bit more anyway. The cruise control still didn't work. I removed the clutch switch wires and went for another drive. Cruise control still didn't work even though the cruise control dash came on. When installing the kit, it seemed too simple an installation for the cruise control to actually work. Does the device send radio signals to the ECM to tell it what to do?
When you say you removed the clutch switch wires, did you unplug the OEM connector that was taped to the harness just above the clutch pedal, or did the Rostra kit include its own wiring for the clutch?

The stalk is a wired connection to the ECM. It is simply four switches and three resistors and the ECM sees the voltage drop across the resistor when one of the switches is pressed. The clutch switch is also a switch input to the ECM, which routes through one of the connectors in the under-hood fuse panel to get there.
jackabMoab, UT · Jan 5, 2014#36
The Rostra instructions said to splice the two wires from the clutch switch to the two wires leading to the A29 connector. The connector was taped up out of the way and was not connected to anything. The CC should work without the clutch switch installed, so I disconnected those wires. Still, the dash CC indicator light comes on and CC doesn't work. I will next take the airbag off and make sure everything is done right there, but it's so simple that even I should be able to get it right.

I installed one of the old style Rostra CC units in my 2010 Yaris, and it works well. It cost a lot more and is more elaborate. The 2011 Yaris belongs to my wife. Her knee is hurting her, and the cruise control helps a lot, so we need to get it going. (You probably didn't need to know all that.)

Thanks for all your time and help.

Bill Foreman
Moab, UT
Mountain Biking Capitol
CTScottThread starterUSA, CT · Jan 6, 2014#37
Originally Posted by jackab ↑
The Rostra instructions said to splice the two wires from the clutch switch to the two wires leading to the A29 connector. The connector was taped up out of the way and was not connected to anything. The CC should work without the clutch switch installed, so I disconnected those wires. Still, the dash CC indicator light comes on and CC doesn't work. I will next take the airbag off and make sure everything is done right there, but it's so simple that even I should be able to get it right.

I installed one of the old style Rostra CC units in my 2010 Yaris, and it works well. It cost a lot more and is more elaborate. The 2011 Yaris belongs to my wife. Her knee is hurting her, and the cruise control helps a lot, so we need to get it going. (You probably didn't need to know all that.)

Thanks for all your time and help.

Bill Foreman
Moab, UT
Mountain Biking Capitol

The CC will not work unless the clutch switch is indeed connected properly. It is a normally closed switch and the ECM needs to see that connection and will abort cruise when it is not.
jackabMoab, UT · Jan 7, 2014#38
You are my hero. It was the clutch switch hookup. It is pretty difficult to work under the dash, and I suppose I didn't make one of the clutch switch connections correctly. This time, I took the seat out so it was easier to work and made the two connections work. I screwed up one to my splicers and soldered the connection instead. Soldering is actually easier than using the splicers, and it is obvious when it is done right. When I installed the CC in my Yaris, it would work without the clutch switch hooked up. In fact, I saw how the brake switch worked and figured out a way to install a micro switch I had left over from my days as an airplane mechanic instead of buying a Rostra switch.

What other products do you sell besides the CC?
DCYarisGuyWashington, DC · Jan 9, 2014#39
Hey I have a base model 2010 Yaris Liftback with A/T. From what I'm gathering from the PDF all I need is the stalk and (if I want) the new boss cover. I won't need to run any wires to the ECU. Is this correct?

Thanks!
CTScottThread starterUSA, CT · Jan 9, 2014#40
Originally Posted by DCYarisGuy ↑
Hey I have a base model 2010 Yaris Liftback with A/T. From what I'm gathering from the PDF all I need is the stalk and (if I want) the new boss cover. I won't need to run any wires to the ECU. Is this correct?

Thanks!
That is correct.
DCYarisGuyWashington, DC · Jan 17, 2014#41
Originally Posted by CTScott ↑
That is correct.
I purchased the stalk, wires, and mounting screws from CTScott and it took about 30 minutes to install. Working great on my 2010 Yaris hatch! Thanks!
CTScottThread starterUSA, CT · Feb 26, 2014#42
Originally Posted by ZAKU ↑
CTScott, what are your thoughts on these?

http://www.ebay.com/itm/Toyota-Camry...0fa459&vxp=mtr

Cheap Chinese junk?
I'm not sure. I have seen those Chinese clones on ebay, but haven't seen one in person to compare the quality versus OEM.
GAWADETN · Aug 12, 2014#43
Mr. Scott,
You are a man of your word and then some! 👏
By far the best simplest installation ever!

I got home late from work, looked over the instructions and thought maybe I should wait when I had more time, it's already dark...
I sat down and really read the instructions and realized I was done after step 2! So went out and did it. The thing that took the longest was finding a T30 to fit. I had a socket set of them but it was to big/short to get all the way in. But once I got one that worked I was off and running!

Great job! Thank you ! 👏👏

Glenn
wildwildipKC · Sep 4, 2014#44
A++ product and install manual. Fast shipper of his kit too! Thanks Scott!
edmondcentenoUAE · Sep 18, 2014#45
Guys

Does it works for 2008 toyota yaris sedan GCC specification?

Thanks you
edmondcentenoUAE · Sep 18, 2014#46
Sir,

I have 2008 yaris sedan GCC specification,, does it has Cruise control provision?
CTScottThread starterUSA, CT · Sep 18, 2014#47
Originally Posted by edmondcenteno ↑
Sir,

I have 2008 yaris sedan GCC specification,, does it has Cruise control provision?
I don't believe it does. PM me the VIN for you car and I can tell you for sure.
CTScottThread starterUSA, CT · Sep 20, 2014#48
For a 1.3L you are limited to an aftermarket solution.
Eduardo_mtySep 21, 2014#49
sorry for my english

Im owned the New 2015 Toyota yaris. And i saw this DIY And i think is possible to do it.

My car is 5 speed manual transmisión, And need to install clutch switch, And stale.

If i upload pictures here, some with knowladge Will helpme.
Eduardo_mtySep 21, 2014#50
This is one pictures from steering wheel
I think the White connector(unpluged) Will be where i will connect the stalk

Picture lost · tapatalk.imageshack.com