Replies continued
Focus_Sh1ftNew Jersey · Dec 28, 2011#251I would imagine anyone that knows a decent amount about engine tuning should be able to pick up on using the software pretty quickly. Realize that most engine managements do the same thing - manage the engine lol. The biggest difference is always going to be how it's implemented.
Don't quote me on that though.
Blown_xaVirginia · Dec 28, 2011#252 Originally Posted by
Yoda ↑ Also what ignition upgrades should I be considering? Just coils? I already have one step colder plugs.
Hmm not sure about the ultimate with the cost of all the things you need to get it running the way you want it. You might be up there in cost with the standalone.
Don't worry about ignition, the factory packs are good past 30psi of boost. I use Haltec Sprint 500, factory wiring harness. Just made a patch (plug and play) harness.
Bluevitz-rsOshawa, Ontario, Canada · Dec 28, 2011#253 Originally Posted by
Yoda ↑ that might be nice but who am i gonna get to tune that beast?
The Tacoma crowd use is it quite a bit if you google it... so I'm sure you could ask someone. Otherwise you might only need a good A/F gauge and tune it yourself.
YodaThread starterFL · Dec 28, 2011#254🆘
Originally Posted by
Blown_xa ↑ Don't worry about ignition, the factory packs are good past 30psi of boost. I use Haltec Sprint 500, factory wiring harness. Just made a patch (plug and play) harness.
hmm let me look into this some. It looks interesting
Blown_xaVirginia · Dec 28, 2011#255 Originally Posted by
Yoda ↑ 🆘
hmm let me look into this some. It looks interesting
it is a good price for a standalone, but just remember this ..... it takes a lot more tuning to have a good running car. I think the FIC is fine for your purposes , unless you want to raise rev limit.
Scubaru Stevecalgary · Dec 29, 2011#256 Originally Posted by
Blown_xa ↑ Don't worry about ignition, the factory packs are good past 30psi of boost. I use Haltec Sprint 500, factory wiring harness. Just made a patch (plug and play) harness.
+1, haltech makes amazing electronics
http://www.haltech.com/index.php/pro...num-sprint-500 Bluevitz-rsOshawa, Ontario, Canada · Dec 29, 2011#257^ but it still doesn't do VVTi right?
Blown_xaVirginia · Dec 29, 2011#258 Originally Posted by
Bluevitz-rs ↑ ^ but it still doesn't do VVTi right?
Platnum sport 1000 does. Factory ecu controls vvti on mine (Sprint 500), use to have Camcon assist... but removed it along with turbo timer. Im the type of person who likes to minimise the number of electronic devices in my car. VVTI honestly isnt worth the time spent tuning IMO. You would be looking at a couple more hours of tune time, for a few whp under the boost curve (max power won't change).
Bluevitz-rsOshawa, Ontario, Canada · Dec 29, 2011#259Yeah vvti is more for N/A on this motor.
YodaThread starterFL · Dec 30, 2011#260Ok i will take your advice. Need to fix my idle problem first. There is a popping sound and the afr dips to 17s every time it does it. Tried scanning it and it showed no misfires so it may just be hitting lean spots. Think there maybe a small leak some where that i need to hunt down. Then gonna get another compression test and a proper retune.
Considering water meth too.
ilikericesavannah, ga · Dec 31, 2011#261Got a quick question for you guys on the standalone.
I hear some use just a piggy back and the stock ecu will correct itself after a while and been reading people just reset their computer by disconnecting the negative on their battery for a min. then runs fine again.
Going standalone. this eliminates that problem, correct? Once its set, its done?
Bluevitz-rsOshawa, Ontario, Canada · Dec 31, 2011#262Yeah a standalone will take over all the control functions of the stock ECU to run the engine. You'd only need to leave the stock ECU connected to specific functions to control specialty items like cruise and auto transmission ect...
cali yarisCanoga Park, CA · Dec 31, 2011#263^ and power steering, even though there is a separate power steering ECU. Found that out by mistake when we removed the ECU.
My stock cluster lights up like a christmas tree now. P/S, airbags, temp, maintenance req'd (I leave that on as a joke), and one more I can't remember.
Focus_Sh1ftNew Jersey · Dec 31, 2011#264 Originally Posted by
ilikerice ↑ Got a quick question for you guys on the standalone.
I hear some use just a piggy back and the stock ecu will correct itself after a while and been reading people just reset their computer by disconnecting the negative on their battery for a min. then runs fine again.
Going standalone. this eliminates that problem, correct? Once its set, its done?
I can definitely understand your confusion here because tbh everyone throws that explanation around and it's really vague.
THERE IS NO REASON YOU CAN'T USE A PIGGYBACK WITH OUR ECU. I assume what most people are talking about when they say this is air/fuel ratio behavior. Yes, the stock ecu will "correct" itself making it impossible to run closed loop fuel control without modifying the O2 signals. On the plus side, it will also change ignition and camshaft timing accordingly. Of course if those were manually tuned (standalone) you could crank more power out.
Moral of the story if using a piggyback: either run open loop, or manipulated closed loop (O2 signals, tps signal).
ilikericesavannah, ga · Jan 1, 2012#265awesome, thanks for the clarification on that Focus.
ParmasML · Jan 2, 2012#266 Originally Posted by
Blown_xa ↑ Platnum sport 1000 does. Factory ecu controls vvti on mine (Sprint 500), use to have Camcon assist... but removed it along with turbo timer. Im the type of person who likes to minimise the number of electronic devices in my car. VVTI honestly isnt worth the time spent tuning IMO. You would be looking at a couple more hours of tune time, for a few whp under the boost curve (max power won't change).
Yeah the Haltech Platinum sport 1000 is currently my ecu and is great in efficiency tuning so far. I cannot understand how the factory ecu is controlling the vvti when it needs certain controls that now are connected to your Sprint 500 ?
I have to disagree with Blown_xa about VVti. I got about 20 torque and 25 bhp till 5000rpm with as far as 30Degrees Advance till 5psi boost. VVTi was tuned within an hour so it was surely worth the time spent tuning !
The Haltech ecu can handle idle control (make it a point that not all standalone ecus handle it so check out the specs first). Attached is my idle control page on ecu.
1 attachment not included in this copy
Blown_xaVirginia · Jan 2, 2012#267 Originally Posted by
Parmas ↑ Yeah the Haltech Platinum sport 1000 is currently my ecu and is great in efficiency tuning so far. I cannot understand how the factory ecu is controlling the vvti when it needs certain controls that now are connected to your Sprint 500 ?
I have to disagree with Blown_xa about VVti. I got about 20 torque and 25 bhp till 5000rpm with as far as 30Degrees Advance till 5psi boost. VVTi was tuned within an hour so it was surely worth the time spent tuning !
The Haltech ecu can handle idle control (make it a point that not all standalone ecus handle it so check out the specs first). Attached is my idle control page on ecu.
The factory ecu still sees everything and controls the vvti actuator just like factory, this is because of the way mine is wired. The halted sprint 500 doesn't control vvti, so that is how it should be wired. However, with the sport 1000 in your case.... It is wired up and can control vvti. It is no surprise you got gains, but that is because you started at a static vvti state ( you started with zero advance).
ParmasML · Jan 3, 2012#268 Originally Posted by
Blown_xa ↑ The factory ecu still sees everything and controls the vvti actuator just like factory, this is because of the way mine is wired. The halted sprint 500 doesn't control vvti, so that is how it should be wired. However, with the sport 1000 in your case.... It is wired up and can control vvti. It is no surprise you got gains, but that is because you started at a static vvti state ( you started with zero advance).
And I thought the Sprint series were better than the Sport Series!
Blown_xaVirginia · Jan 3, 2012#269 Originally Posted by
Parmas ↑ And I thought the Sprint series were better than the Sport Series!
The sports series has more features... aux inputs, outputs. Also has cold start, sprint does not. We use the sport 1000 on scion tc's, haltec actually created the basemap for that car with us on our dyno years ago. So the vvti for that engine management was already set up ( tuned bone stock car).
I like the Sprint 500 though, it is physically tiny, and does everything I need.
YodaThread starterFL · Feb 24, 2012#270Goal is 300WHP...
YodaThread starterFL · Mar 27, 2012#271Need help on the injector size. Dont know what size to use. Its gonna be tunned for 250 whp untill i get a few more suppension mods and lsd. Got pics of dome goodies will post later.
cali yarisCanoga Park, CA · Mar 27, 2012#272minimum 550cc, or get the ones I have @ 632cc
Bluevitz-rsOshawa, Ontario, Canada · Mar 27, 2012#273So did you end up doing any internal work?
YodaThread starterFL · Mar 27, 2012#274 Originally Posted by
Bluevitz-rs ↑ So did you end up doing any internal work?
Yup rods and pistons for now then goon be building up my spare head over the summer then slap it all together. What plugs u running Garm?
cali yarisCanoga Park, CA · Mar 27, 2012#275hmm not sure. cooler ones. :)
...and honda motorcycle coils paired with an M&W ignition module.
1.5Tampa · Mar 27, 2012#276off topic but I cant find the answer by searching,
What is the size flange on the manifold you are selling Garm?
cali yarisCanoga Park, CA · Mar 27, 2012#277T25
YodaThread starterFL · Apr 2, 2012#278pimp my yarischicago · Apr 16, 2012#279I am looking into a new rail, pump, regulator with return. Have U purchased a rail yet. If so how did it work out?
YodaThread starterFL · Apr 17, 2012#280All rails are on back order. Its gonna take atleast 2 months before I can get one made.
fnkngrvIn The Hotbox · Apr 17, 2012#281To get you by until you can "upgrade" I have a contact that can modify the stock rail for return line. Hit me up if you want and I can get you connected. This is what I will be doing until the right rail is available for my needs.
YodaThread starterFL · Apr 17, 2012#282This is what I am doing.
djgab101australia · Apr 18, 2012#283the rods and pistons you used are forged are they the same size as the origional ones? so it is just a matter of replacing the piston and rods
pimp my yarischicago · Jun 4, 2012#284How is your engine build going? Did U complete your return line?
YodaThread starterFL · Jun 15, 2012#285Ran into an issue with the machine shop so I am still waiting for them to get the engine back. Not exactly happy about waiting 2 months just for machine work...
cali yarisCanoga Park, CA · Jun 15, 2012#286^ Understandable. Golden Eagle is also currently a 6-8 week wait just for sleeving.
YodaThread starterFL · Jun 15, 2012#287I dont mind waiting if its quality work. Just sux not having the car and renting one.
pimp my yarischicago · Jun 15, 2012#288I lost a month and a half working on my car. It blows. Most of the time was waiting for parts.
Are U getting your short block sleeved?
YodaThread starterFL · Jun 16, 2012#289 Originally Posted by
pimp my yaris ↑ I lost a month and a half working on my car. It blows. Most of the time was waiting for parts.
Are U getting your short block sleeved?
nope. Think it would be unnecessary for my goals.
packetraceQuebec · Jun 16, 2012#290all those turbo thread makes me wanting it loll...but i got a/t...:(
cali yarisCanoga Park, CA · Jun 16, 2012#291^ so? you can turbo an auto.
YodaThread starterFL · Jun 16, 2012#292Turbo autos are fun. Do it!
packetraceQuebec · Jun 16, 2012#293I wont use all the potential from this turbo...:O ?
YodaThread starterFL · Jun 16, 2012#294There will be some lost due to the transmission but still there will be a very noticeable change in power.
packetraceQuebec · Jun 16, 2012#295tempting!!!
YodaThread starterFL · Jul 1, 2012#296Its getting close to fun time but i need a fuel pressure regulator for my return line and fuel gauge any suggestions?
cali yarisCanoga Park, CA · Jul 1, 2012#297I'm an AEM fan (except for their coils, lol), obviously:
Picture not included in this copy
cali yarisCanoga Park, CA · Jul 1, 2012#298I'm an AEM fan (except for their coils, lol), obviously:
Picture not included in this copy
YodaThread starterFL · Jul 3, 2012#299You wouldn't happen to have one in stock would you?
packetraceQuebec · Aug 12, 2012#300Can these iginition coil be used on a stock echu with piggyback ?