Need updates!
Yoda's Turbo Log
386 posts · 98,243 views · page 2 of 8
Replies continued
was trying to wait until i was gonna install it to open the box but.... eh you kno. everything looks....nice lol but the instructions are well....just pictures lol. not sure when i will have the time to install it but i will def take pics. stay tuned
Yoda...As far as engine management have you looked into Snipertune? They do mostly fords and the NC Miata. The NC had a similar situation that the yaris has with a learning ecu. I know they are somewhere in northern Florida. Maybe you can call them and get some info.
never heard of them but will def give them a ring THANKS for the info
Sorry now they are called Delta Force...Here is a link to their website
http://www.deltaforcetuning.com/default.asp
http://www.deltaforcetuning.com/default.asp
any updates yoda ?
its all still sitting in my closet. Life has just turned for the worst over the last month with the family. I might have to even sell it....
month update?
still got it just don't have the time...
pics atleast? :(
will try to get my cam back to take some pics. or buy a new one. sux working 2 jobs. all you do is eat, shit, sleep and work. dont count me out yet tho
keep us updated on the family and the situation
good to hear you're staying strong though
good to hear you're staying strong though
Sorry for just now updating didn't have time before and not really that much right now. Just got a message from Focus_Sh1ft about the kit i bought so might as well let everyone know whats up. Sit back and here is the low down on my situation and the Zage Kit.This is gonna be long.
1.
Lots of problems arose with family and all that and they were solved thank God. That left me with money to save and install the kit.... Not so, about 2 weeks later i got involved in a hit and run. Nothing too bad they just took my rear bumper off completely and a little frame damage. Police caught them but they did not have insurance hence why they ran. Got quoted $600 to fix it by a few shops. My insurance Gieco wants me to pay a $500 deductible to fix it. I said ok i will ride around with no bumper until i can pay to do it.
2.
Maybe like 3 weeks later i got into a fight with some random guy. Reason being he was insulting my lady calling her names and the sort. I was just walking away dragging her with me since he was drunk and all. Then he shouted "you better run n***er". O it gets better he then runs up to me and i decked him one good time😈 Out cold he was but i also broke my thumb.
To the emergency room i went and gotten everything taken care off....
3.
Some weeks later i get a hospital bill for $3213.50. Then the emergency room bill for $665.00 after that was family doctor bill for $173.70. Lastly they charged me for doing three xray views on my hand $20.63.😳
Called Aetna my insurance company to ask WTF? They told me that something with my policy change and they need a deductible of $2400 for them to cover 90% of my charges.
So yea all this led me to sell the kit to a guy i meet in Port St Lucie. he gave me $1000 cash (low ball but i needed the money badly).
4.
Now you all heard about the zage kit and all. Well he installed and called me about a week after. Long conversation. Heres the low down from what he told me. There are no instructions just some pictures for the installation. There are some fitment issues but he solved them. He then tried to contact Zage to help with the install when he got stuck. They were not responsive. Dont kno if it was because he didnt buy it directly from them. Regardless he got it up and running. Then he said something in the turbo exploded and he now has metal in his intercooler and maybe the engine too he is not sure. He then tried to blame me for it and i told him to take it up with Zage as i warned him before the sale that its not been tested in the US.
So this is where i am at guys sorry for taking so long and all. Life just seems to just be grinding me down🙁 Good news tho i am up fro a promotion in the upcoming month. They are moving me to Alabama....🤷 But hey its a good pay increase. The cop took some pics of the bumper if any1 wants so see it i can post it. And i have some random stock parts too if people are in need.
1.
Lots of problems arose with family and all that and they were solved thank God. That left me with money to save and install the kit.... Not so, about 2 weeks later i got involved in a hit and run. Nothing too bad they just took my rear bumper off completely and a little frame damage. Police caught them but they did not have insurance hence why they ran. Got quoted $600 to fix it by a few shops. My insurance Gieco wants me to pay a $500 deductible to fix it. I said ok i will ride around with no bumper until i can pay to do it.
2.
Maybe like 3 weeks later i got into a fight with some random guy. Reason being he was insulting my lady calling her names and the sort. I was just walking away dragging her with me since he was drunk and all. Then he shouted "you better run n***er". O it gets better he then runs up to me and i decked him one good time😈 Out cold he was but i also broke my thumb.
To the emergency room i went and gotten everything taken care off....
3.
Some weeks later i get a hospital bill for $3213.50. Then the emergency room bill for $665.00 after that was family doctor bill for $173.70. Lastly they charged me for doing three xray views on my hand $20.63.😳
Called Aetna my insurance company to ask WTF? They told me that something with my policy change and they need a deductible of $2400 for them to cover 90% of my charges.
So yea all this led me to sell the kit to a guy i meet in Port St Lucie. he gave me $1000 cash (low ball but i needed the money badly).
4.
Now you all heard about the zage kit and all. Well he installed and called me about a week after. Long conversation. Heres the low down from what he told me. There are no instructions just some pictures for the installation. There are some fitment issues but he solved them. He then tried to contact Zage to help with the install when he got stuck. They were not responsive. Dont kno if it was because he didnt buy it directly from them. Regardless he got it up and running. Then he said something in the turbo exploded and he now has metal in his intercooler and maybe the engine too he is not sure. He then tried to blame me for it and i told him to take it up with Zage as i warned him before the sale that its not been tested in the US.
So this is where i am at guys sorry for taking so long and all. Life just seems to just be grinding me down🙁 Good news tho i am up fro a promotion in the upcoming month. They are moving me to Alabama....🤷 But hey its a good pay increase. The cop took some pics of the bumper if any1 wants so see it i can post it. And i have some random stock parts too if people are in need.
Sorry to hear about all of the hardships that you have endured, but atleast you look like you are getting through them with your head held high.
Regardless, I feel he did not prime the turbos and blew the seals or wasnt lubricated when spinning. I just spiked 30psi on my chinese turbo yesterday by accident and it held through flawlessly. Everyone says my car sounds nice the way its running. 2x the chinese turbos 2x the expectation for failure 😈 right? lol no they work great so far.
Regardless, I feel he did not prime the turbos and blew the seals or wasnt lubricated when spinning. I just spiked 30psi on my chinese turbo yesterday by accident and it held through flawlessly. Everyone says my car sounds nice the way its running. 2x the chinese turbos 2x the expectation for failure 😈 right? lol no they work great so far.
i didnt ask him if he primed it or not. Most dont kno that i guess, he owns his own shop tho so idk. I learn about it when i was doing my research lol. But the main thing is that he got it working so the turbo might be the weak point if not taken care of in detail.
LOL just because you own a shop doesn't make you smart, I know multiple people who shouldn't even be near a car let alone installing parts or doing custom work. Anyways, you should ask him and if he goes huh prime what? then thats an issue. Anyways, its an easy replacement, tell him to suck it up he got a deal and to drop another $150 on a used turbo
Yoda, thanks so much for posting man. I can't believe the amount of stuff you went through in the past couple months.😲
Glad you're hanging in there though.
I really appreciate the update and feedback on this kit. I'm now convinced I want nothing to do with their turbocharger. However, I was wondering if you could elaborate a bit more on the "fitment" issues? This term has been floating around forever and I wanna know exactly what is meant by this.
I'm pretty bummed I didn't contact you sooner lmao. I wish you all could have seen the face palm that followed immediately after I saw that low ball offer.
Glad you're hanging in there though.
I really appreciate the update and feedback on this kit. I'm now convinced I want nothing to do with their turbocharger. However, I was wondering if you could elaborate a bit more on the "fitment" issues? This term has been floating around forever and I wanna know exactly what is meant by this.
I'm pretty bummed I didn't contact you sooner lmao. I wish you all could have seen the face palm that followed immediately after I saw that low ball offer.
i can try can get a hold of mike(the guy i sold it to) to get more details on the fitment. hope he is not still upset at me lol.
craziness! Alabama here you come.
quite a story, glad things are getting better for you.
Sounds like we are still waiting for the proper test subject for that kit.
Sounds like we are still waiting for the proper test subject for that kit.
Looks like it may be me afterall.Originally Posted by cali yaris ↑quite a story, glad things are getting better for you.
Sounds like we are still waiting for the proper test subject for that kit.
Yoda, can you please ask your buyer if he primed his turbo as well? I may be using theirs afterall and am hoping that's the only reason it exploded. 🤷
i just call him and tried to ask. He was like what you want now then hung up....sorry best bet is to ask one of the overseas Zage users or google zage turbo on the web and see if any of the honda guys used it....
^ ouch
Sucks man, you should find him on some forum and just go "lolumad because you don't know what you're doing."
I dont know how it would be unless the tube is uber restrictive. A return is a return is just a tube that goes down to the pan or wherever to drain oil into.
Intercoolers do not pass chunks of metal through the piping. Depending on what side it is on on the intercooler, it may never see the engine.
Intercoolers do not pass chunks of metal through the piping. Depending on what side it is on on the intercooler, it may never see the engine.
WOOT long over due update. Got promoted in Florida so no more Alabama. Got some cheddar to waste and was thinking this should be my first buy....
http://cgi.ebay.com/ebaymotors/T25-T...ht_2525wt_1161
http://cgi.ebay.com/ebaymotors/T25-T...ht_2525wt_1161
YES.
Just don't get everything you need, then decide to sell it to some random lowballer. 😛
Just don't get everything you need, then decide to sell it to some random lowballer. 😛
lol not this time the promotion really helped. Now i have room to breath.
the first step is commitment😁
1 attachment not included in this copy
^ awww, love it
That turbo looks very familiar.🎉
It looks like the same one I'm using. A word of advise. Use a downpipe that will blend wategate and through turbine gases smoothly or you will have boost creep. I speek from experience. But that turbo spools super fast and has plenty of flow.
It looks like the same one I'm using. A word of advise. Use a downpipe that will blend wategate and through turbine gases smoothly or you will have boost creep. I speek from experience. But that turbo spools super fast and has plenty of flow.
Not sure what you mean by blend...?Originally Posted by pimp my yaris ↑That turbo looks very familiar.🎉
It looks like the same one I'm using. A word of advise. Use a downpipe that will blend wategate and through turbine gases smoothly or you will have boost creep. I speek from experience. But that turbo spools super fast and has plenty of flow.
O and thanks👍
My downpipe that I based of the zage downpipe was easy to build and weld up, but it restricts wastegate exhaust flow. Their is a small cast iron divider in that turbo between the turbine exit and the wastegate exit. If you use a downpipe flange that is flat like mine, U will have restricted flow from wastegate. Then comes boost creep at higher rpm. Use a flange that has a chamber after the turbo to smoothly blend those gases before entering the exhaust. I corrected my problem by grinding down that divider. The first two pics is my downpipe flange [dont]. The third pic is a flange for for a gt25 that will work much better for that turbo. Hope this is helpfull.😁
3 attachments not included in this copy
ahh ok i seee. Makes sense never even crossed my mind and i call myself an engineer tsk tsk. Where can i find a flange like that?
Question what would happen if i used the oil return spot on the turbo to feed the oil in and the other to drain to the pan?
Talking about the top part with the blue thing in it. I use that location to feed the oil in and the opposite side to drain it to the oil pan... would it work that way?
1 attachment not included in this copy
I think I know why you're asking - and if that's the case you could just reclock the turbo?
Otherwise, I don't think it would matter as long as the return is on the bottom (obviously). You probably would want to run a thicker line for the return to keep oil pressure down in the turbo. Unless you like getting oil in your intercooler like I did 🙄
Oh, and that thing is adorable 😳
Otherwise, I don't think it would matter as long as the return is on the bottom (obviously). You probably would want to run a thicker line for the return to keep oil pressure down in the turbo. Unless you like getting oil in your intercooler like I did 🙄
Oh, and that thing is adorable 😳
Well that one is not mine. Just a pic I found online that showed what I meant. I would need to drill and make new holes to reclock it the way I want. Can't figure out how to take off the compressor housing. I can turn it, but the middle part turns with it too
That is terribly inconvenient lol 🤷Originally Posted by Yoda ↑Well that one is not mine. Just a pic I found online that showed what I meant. I would need to drill and make new holes to reclock it the way I want. Can't figure out how to take off the compressor housing. I can turn it, but the middle part turns with it too
It looks like it could be possible to take just the compressor housing off? Would the bolt holes still align if you took it off and rotated it?
I pretty much have the same turbo that pimp has with the internal wastegate so jaw it won't line up. I am planning to route the piping differently tho.Originally Posted by Focus_Sh1ft ↑That is terribly inconvenient lol 🤷
It looks like it could be possible to take just the compressor housing off? Would the bolt holes still align if you took it off and rotated it?
Well pimp has his working. Just didn't want to drill into it. O well... Let me go buy some more tools and stuff
On my first install, I bought a Garrett GT2554R. I had to re-clock it.
I think if you're buying a pre-packaged KIT you shouldn't have to.
I think if you're buying a pre-packaged KIT you shouldn't have to.
Too late for a kit now lol. Plus I feel I will gain alot of knowledge from this.Originally Posted by cali yaris ↑On my first install, I bought a Garrett GT2554R. I had to re-clock it.
I think if you're buying a pre-packaged KIT you shouldn't have to.
If I could figure out how to rotate the center housing I will be good. I got the compressor to rotateOriginally Posted by cdydjded ↑From the pic you can clock this turbo.....BTW just to clear something up, clocking the turbo means to rotate the turbine, center housing & compressor from its current position to another position....
The turbine housing [exhaust side] is held on with four bolts. The Compressor housing [intake side] is held on with a large snap ring. You will need some large snap ring plyers. Its on pretty tight. I will tell you from experience you must clock the turbo cartrige [Center section of the turbo] so your oil feed is on the top and oil drain is on the bottom. Other wise the seals will leak when oil is pooled in the turbo when the car is parked. And every time U start the car U will get a lot of white smoke. Oil feed and drain can not be reversed. You will also need a bajo bolt for the oil feed with a 1.5mm restricter. This will allow the proper amount of oil into your turbo. If the turbo gets full flow from the line U will starve the engine for oil pressure [very bad]. If its a ball bearing turbo U will need a 1.0mm restrictor banjo bolt. My turbo uses journal bearings.
I did need to drill and tap a small hole in the compressor housing when the housing was clocked correctly for the bracket that holds on the wastegate actuator. I have a very complete metric tap and die kit. Very handy for this project.
I have some pics and info about reclocking the turbo in my thread starting on page 3.
Check it out and be very careful and take your time when dissassembling the turbo. You dont want to bend or chip any of the tubine blades on either side or you can through off the balance of the spining assembly. Will shorten the life of the turbo.
Please feel free to PM me with any questions and I will help U out. I can also tell U of some mistakes I made when ordering parts that can save U $. Parts on E-bay that says they will fit the GT25 turbo are actually made for the Garret GT25 ball bearing turbos. This turbo uses different oil feed banjo bolt thread pattern and different oil drain flange.
If You look at my thread U can see most of the parts I ordered.👍
I did need to drill and tap a small hole in the compressor housing when the housing was clocked correctly for the bracket that holds on the wastegate actuator. I have a very complete metric tap and die kit. Very handy for this project.
I have some pics and info about reclocking the turbo in my thread starting on page 3.
Check it out and be very careful and take your time when dissassembling the turbo. You dont want to bend or chip any of the tubine blades on either side or you can through off the balance of the spining assembly. Will shorten the life of the turbo.
Please feel free to PM me with any questions and I will help U out. I can also tell U of some mistakes I made when ordering parts that can save U $. Parts on E-bay that says they will fit the GT25 turbo are actually made for the Garret GT25 ball bearing turbos. This turbo uses different oil feed banjo bolt thread pattern and different oil drain flange.
If You look at my thread U can see most of the parts I ordered.👍
Thanks pimp! I will hit you up with any questions that.I have
Problem.... Seems that the diameter on the compressor is too big. Its too close to the exhaust pipping. 🤷 🆘Here are the specs:
Compressor Wheel .60 A/R
Trim 49
2" intake diameter
Compressor Wheel .60 A/R
Trim 49
2" intake diameter
2 attachments not included in this copy
^ Gonna be hard to make a downpipe for that. 😛
Couldn't you just have a catback exhaust made and have the exhaust mount a little further away? Or would you need to get the full exhaust done? Hmm...
Couldn't you just have a catback exhaust made and have the exhaust mount a little further away? Or would you need to get the full exhaust done? Hmm...
Well what I plant to do is cut off the extra pipping and weld the mounting right before the cat. Should give more than enough room that way.
I had all custom exhaust made. 2in stainless downpipe into 2.25" aluminized steel downpipe back into polished stainless muffler with 4" exit. Their are 2 converters on the factory exhaust. The first one will need to be cut off to make room for down pipe. The downpipe will need a flex joint to allow the engine to twist or your exhaust will break. The factory exhaust swivels at the header joint. This is the part that is touching your compressor housing in your picture. And it the part you will cut off to make room for a downpipe.