Yarisworld Archive

Yoda's Turbo Log

386 posts · 98,243 views · page 3 of 8

Replies continued

YodaThread starterFL · Oct 25, 2010#101
Which one is the first one? You counting from the engine back?
pimp my yarischicago · Oct 26, 2010#102
Downpipe is the pipe attached to the turbo.
YodaThread starterFL · Oct 26, 2010#103
Originally Posted by pimp my yaris ↑
Downpipe is the pipe attached to the turbo.
I kno that just got confused about which converter you talking about. Got it figured out now tho. And I got my piping in today:)
YodaThread starterFL · Nov 2, 2010#104
Quick update. Yea my car is dirty 😳 Did the piping. Only needed one piping kit with the way i have it set up so saving money there. Next is oil and water lines and custom down-pipe...Hoping to be done with everything by late November 🙄

5 attachments not included in this copy

Focus_Sh1ftNew Jersey · Nov 2, 2010#105
Day-um.

Lookin good, keep it up. 🎉
pimp my yarischicago · Nov 2, 2010#106
Its like Deja Vu!!!!! What a mind trip.🎉
YodaThread starterFL · Nov 3, 2010#107
Originally Posted by pimp my yaris ↑
Its like Deja Vu!!!!! What a mind trip.🎉
Well you gave me the confidence to do it😁. And It is as you say very fun
YodaThread starterFL · Nov 15, 2010#108
Need some bigger injectors...any recommendations?
cali yarisCanoga Park, CA · Nov 15, 2010#109
bigger than stock? 1ZZ, then Scion tC, then aftermarket, in that order.
YodaThread starterFL · Nov 20, 2010#110
Stay tuned
cali yarisCanoga Park, CA · Nov 20, 2010#111
^ good pun. LOL
YodaThread starterFL · Nov 20, 2010#112
Got rained out. But only thing left is my down pipe and getting some larger injectors. I have learned so much tru this. Not nearly as hard as I thought
YodaThread starterFL · Nov 25, 2010#113
What year range do you source the 1zz injectors?
Focus_Sh1ftNew Jersey · Nov 25, 2010#114
Originally Posted by Yoda ↑
What year range do you source the 1zz injectors?
I don't think it matters. I (think) they all range from 240-260cc. Even 240 should be enough for a low boost application, since the 1NZ's apparently max around 5 psi of boost.
YodaThread starterFL · Dec 2, 2010#115
Sorry for late updates. Got my aem uego in and all the other gauges. I suck at wiring. Not sure yet how I am gonna tackle that part. I will put up some pics later.
Focus_Sh1ftNew Jersey · Dec 2, 2010#116
^ Suck less 🙄
YodaThread starterFL · Dec 2, 2010#117
Lol u got a point. My idea of wiring is twisting the ends and using electric tape😳
So yea that's not gonna work gonna have to go pro on this part
Focus_Sh1ftNew Jersey · Dec 2, 2010#118
Well you're halfway there lol...

Are you one of those people that are deathly afraid of soldering irons?
YodaThread starterFL · Dec 2, 2010#119
No and I do have one come to think of it. Guess I could read more into it and try my luck..... Just need to find where I am goona get the power source from.
Focus_Sh1ftNew Jersey · Dec 2, 2010#120
Save yourself the money then. I'll help you out with any questions you have.

Just so you know, I found it easy to use add a fuses for my gauges. They allow you to have two fuses in one slot while also providing a wire (fused) that can be used to supply power to items like gauges.

Here's an example
http://www.amazon.com/Bussmann-BP-HH...=pd_sim_auto_1
YodaThread starterFL · Dec 3, 2010#121
Didn't kno they made those. Do I just get one and wire all three gauges to it for power?
cali yarisCanoga Park, CA · Dec 3, 2010#122
^ yeah those are really cool, make wiring a lot easier. I have the same fear you do, but I've done some myself.
Focus_Sh1ftNew Jersey · Dec 3, 2010#123
Originally Posted by Yoda ↑
Didn't kno they made those. Do I just get one and wire all three gauges to it for power?
Only electric gauges are going to need power, but yes. I used two add a fuses - one I placed in the MET slot, and the other was placed in PANEL1. MET is used to power the gauges, PANEL1 is used for illumination. These fuses are under the dash on the drivers side. Also, there's a ground point right next to it I used for all the grounding.
YodaThread starterFL · Dec 3, 2010#124
Ok cool. I am so close now can't wait. There where so many small little things I had to get. Nuts, bolts, adapters, vacuum lines and let's not forget the all important zip ties just to name a few!
O and I got some new headlight bulbs form MI and they are sexy.
YodaThread starterFL · Dec 7, 2010#125
Got my gauges set up.... Doing oil lines and the such now....
pimp my yarischicago · Dec 7, 2010#126
Are U gonna run a AEM FIC? Or other
YodaThread starterFL · Dec 9, 2010#127
Aem I think. I got it all set up now. I was looking at my oil pressure and it was about 20psi at it's lowest...... There is also a funny sound scratching sound when I let off the throttle and just cruise. This is also when my oil pressure starts to drop from 60 down to 20. While in boost it's fine tho. I am taking my time with it scince when I let off the throttle it goes lean. I need those injectors asap.
Focus_Sh1ftNew Jersey · Dec 9, 2010#128
scince when I let off the throttle it goes lean. I need those injectors asap.
You're describing DFCO which is perfectly normal.

Also, you don't really need 1ZZ injectors. If you'd like the additional margin of safety it wouldn't hurt though. I'll sell you mine if you need some.
cali yarisCanoga Park, CA · Dec 9, 2010#129
60 down to 20 on oil pressure is fine.

Off throttle, it should go off the charts lean (because no fuel is being injected), my gauge shows " - - - " which is beyond 16:1

That's normal too.
YodaThread starterFL · Dec 9, 2010#130
Ok cool was getting worried alittle. I don't even have a CEL. It's all been good so far I am still too afraid to really get on it with out the injectors so expect pm Focus! And thanks to everyone that help and guided me. Custom is the way to go you learn so much and I am confident in my build. No smoke, no leak, no CEL! Now got to tidy up all the wiring a bit then get my water lines in next maybe
pimp my yarischicago · Dec 9, 2010#131
With tuning from the AEM you should be good up to about 6 psi with the stock injectors. Are U using a oil restrictor on the feed line? There should be a 1.5mm restrictor on the banjo bolt for the oil feed line into the turbo. This keeps oil pressure normal in your engine by not allowing all the prssure to bleed through your turbo housing. Also would you mind posting a picture of your downpipe. We are using the same turbo and I'm just curious how yours looks.
YodaThread starterFL · Dec 9, 2010#132
Originally Posted by pimp my yaris ↑
With tuning from the AEM you should be good up to about 6 psi with the stock injectors. Are U using a oil restrictor on the feed line? There should be a 1.5mm restrictor on the banjo bolt for the oil feed line into the turbo. This keeps oil pressure normal in your engine by not allowing all the prssure to bleed through your turbo housing. Also would you mind posting a picture of your downpipe. We are using the same turbo and I'm just curious how yours looks.
Nope not using a restrictor. Here are the pics of the downpipe from above.

2 attachments not included in this copy

haschelEastern township Qc · Dec 10, 2010#133
Just one question, is it the wideband O2 we see on your downpipe?
YodaThread starterFL · Dec 10, 2010#134
Originally Posted by cdydjded ↑
You need to add an oil inlet restrictor, your turbo will start to smoke if its not already...
I would but it already has a internal one. If it ever does start to smoke then I will.

Originally Posted by haschel ↑
Just one question, is it the wideband O2 we see on your downpipe?
Yea it is.
haschelEastern township Qc · Dec 10, 2010#135
Last week, I was reading the installation instruction for my wideband and I saw that on page 3:

Sensor Mounting
A weld-in M18 X 1.5 boss is supplied for sensor installation. Mount the O2 sensor in the
exhaust system at least 18 inches downstream from the exhaust port. If you anticipate
high EGT's (over 800C), run a turbocharger, run at high RPM for extended periods of
time or plan on running leaded race fuel then you must mount the sensor at least 36
inches or more downstream of the exhaust port as all of these can cause the sensor to
overheat.


http://www.aemelectronics.com/Images...%2030-5130.pdf

I hope your sensor will last at this emplacement.
pimp my yarischicago · Dec 10, 2010#136
Nice downpipe. Is that 2.5"? Where is your factory O2sensor? I also bought some heat wrap for my turbo and downpipe because the under hood temps get crazy hot without it. Over time plastic gets very brittle and breaks easily if is gots so hot all the time. Things like wire connectors will break very easily if it is always so hot under the hood. Very common with mitsubishi's and V dub's. Just a sugestion.
YodaThread starterFL · Dec 10, 2010#137
Yea I just now remembered about that 18" thing might have to switch it with the o2 on the other side. As for the heat I dont have that problem with heat yet cause I hardly even hit 5psi but I will get wrapping for it next week when I get paided and also try to see if I can relocate the O2. O and it's 2.5 good guess
YodaThread starterFL · Dec 11, 2010#138
Has any1 experience there boost gauge needle being shaky/jerky at times? I have no leak and it's not pinched. I also hear the turbo boosting at partial throttle and there is a slow responds from the gauge. Gonna get rid of that plastic hose and run a rubber one. Make me wonder if I have a boost leak somewhere.
pimp my yarischicago · Dec 11, 2010#139
I can hear mine start spooling at zero psi and higher even under light accel. It has very little lag.😁
YodaThread starterFL · Dec 11, 2010#140
Lol I think you missed my question. How's your boost gauge? Lol. If this next thing doesn't work then I might try tapping into the wastegate. Might not be as accurate cause it will show higher psi but there should be less lag
Focus_Sh1ftNew Jersey · Dec 11, 2010#141
I've noticed both of those things happening as well. Not sure about the jerky needle, but if you reach a certain throttle position and hold it, it's definitely possible for exhaust pressure to build enough to begin spooling slightly.
YodaThread starterFL · Dec 12, 2010#142
What do you think about tapping the wg for the boost gauge?
YodaThread starterFL · Dec 12, 2010#143
Got my first CEL... Fuel system too lean lol. Can't wait for those injectors. I will order my FIC Thursday for now I am staying out of boost. My idle afr sometimes even dips to the 16s :(
Blown_xaVirginia · Dec 12, 2010#144
Originally Posted by Yoda ↑
Lol I think you missed my question. How's your boost gauge? Lol. If this next thing doesn't work then I might try tapping into the wastegate. Might not be as accurate cause it will show higher psi but there should be less lag
what kind of boost gauge is it? some come with a vac-T with a built in restrictor so the vac signal is dampened. Also when tapping off the evap noid line, the boost gauge needle may shake at idle when that evap noid pulsates / turns on. Nothing really is wrong.
pimp my yarischicago · Dec 12, 2010#145
Mine is teed at the evap. line coming of the intake using the plastic tubing. I am using a autometer phantom mechanical guage. No problem with shaking needle.
Blown_xaVirginia · Dec 12, 2010#146
Originally Posted by pimp my yaris ↑
Mine is teed at the evap. line coming of the intake using the plastic tubing. I am using a autometer phantom mechanical guage. No problem with shaking needle.
yea ive not had a problem with mine either, I would say ive seen it (shaking needle) more with prosport gauges.
YodaThread starterFL · Dec 13, 2010#147
mine looks like this.... I got it a pepboys 🤷 Think i gonna upgrade it later to one that also has vac. Pimp can you post a pic of where that evap line is

1 attachment not included in this copy

YodaThread starterFL · Dec 17, 2010#148
Got ride of the too lean error code but now i got this....P2195 Does it mean my o2 sensor has gone bad? Need some input on this one
Focus_Sh1ftNew Jersey · Dec 17, 2010#149
Do you have a scangauge?

Is the car in closed loop during light acceleration?
YodaThread starterFL · Dec 18, 2010#150
Nope I don't have one. How do I tell when it's in close loop