You would first have to find the place. 😆 When we picked up the Yaris, at a different location, we were sure we had the wrong place. You could walk right up to the door of some of these places and not even know you are there, just looks like any old warehouse with an empty parking lot. Sneaky.Originally Posted by justjesus ↑^ VERY NICE! I wonder if I can make my yaris look like yours before YOU take yours in...
Stay tuned
1,311 posts · 595,379 views · page 4 of 27
Replies continued
Are you referring to Toyota USA head office (TMC) in Torrance?Originally Posted by Jason@SportsCar ↑It is a very rare day when I don't love my job... But some days it just gets better. Hearing of our small stumble, we have been invited to bring the Yaris to the Toyota tech center for a once over and any help needed to get it in tip top shape for the upcoming race. 🎉
Having access to all of the proper diagnostic tools, and the guys who can fix these cars in their sleep. Priceless.
P.S. I used to work for Toyota Canada technical training, so I'm not a noob to diagnosing a toyota either. So hopefully it just a wiring problem messing with signal, or just the fact that you ran the tank dry. 👍
Toyota has a lot of buildings stretched over a few square miles of Torrance. 😉Originally Posted by Bluevitz-rs ↑Are you referring to Toyota USA head office (TMC) in Torrance?
P.S. I used to work for Toyota Canada technical training, so I'm not a noob to diagnosing a toyota either. So hopefully it just a wiring problem messing with signal, or just the fact that you ran the tank dry. 👍
o.k......😕Originally Posted by Jason@SportsCar ↑Toyota has a lot of buildings stretched over a few square miles of Torrance. 😉
they sure do, and Rado's World Racing is right there too.
Nice transformation so far! Coming along nicely
You should Auto-X with us sometime 🙂
You should Auto-X with us sometime 🙂
Originally Posted by Jason@SportsCar ↑Most of the time its more time than budget, but we already missed one race, so we will do everything we have to make the next. I am not a fan of keeping old parts as spares - you took them out for a reason. 🤷 Once I know what parts a car uses I always try to keep new ones. For the RX-8 it is coils, plugs and a fuel pump. For the Corvette it was a rear hub and a gas pedal. As long as I had the parts on hand I never needed them at a race. 😆
Looks like we are going to try and get some dyno time before the race, that will be our only chance to beat it up and see if the problem returns.
It will also be good to know if this Camcon unit is tuned safe, or if we should just leave it off. A better ECU setup will come later.
So, would this mean that you will pitch all the used parts you've pulled? If so, I'm happy to pay shipping to get them from you.
It would not be worth the time it took me to ship them. But thanks for the offer. 😉Originally Posted by ozmdd ↑So, would this mean that you will pitch all the used parts you've pulled? If so, I'm happy to pay shipping to get them from you.
Maybe I will bring it to one of the El Toro events, much closer to home, and a way better site than Fontucky.Originally Posted by SilverBack ↑Nice transformation so far! Coming along nicely
You should Auto-X with us sometime 🙂
wow, i wish i was THAT coolOriginally Posted by Jason@SportsCar ↑It would not be worth the time it took me to ship them. But thanks for the offer. 😉
More power to you if you have time to do stuff for free. I have no interest in using my limited spare time to box and ship parts for zero return. 🤷Originally Posted by kngrsll ↑wow, i wish i was THAT cool
I already did it once, but that was a unique situation, I sent the Tein door panels to someone who paid for shipping. But to waste my time and someone else's money to ship used (questionable condition) expendable parts, that is just stupid.
However, if someone local wanted the parts - or to be the "good guy" and pick them up and ship them to another party - maybe we could work something out.
i am by no means an expert or professional in racing, but it is a hobby that i have huge passion for. I wouldn't have gotten anywhere without a lot of FREE help from good people, and when i get the occasional chance to give back and help someone out, i try to do it. So comments like that get under my skin. If you don't have time, i totally understand, but i think you can decline to help with a little more courtesy.Originally Posted by Jason@SportsCar ↑More power to you if you have time to do stuff for free. I have no interest in using my limited spare time to box and ship parts for zero return. 🤷
I already did it once, but that was a unique situation, I sent the Tein door panels to someone who paid for shipping. But to waste my time and someone else's money to ship used (questionable condition) expendable parts, that is just stupid.
However, if someone local wanted the parts - or to be the "good guy" and pick them up and ship them to another party - maybe we could work something out.
+1 !
umm... and you seem to have enough time to post a lot. just saying... 🙂
umm... and you seem to have enough time to post a lot. just saying... 🙂
On the other side of he coin, I have been at this for a long time and have seen people benefit from my (and others) generosity. Example, helped a guy out with a set of usable tires we no longer needed, he sold them instead of using them as intended. So excuse me if I don't rush off to give away parts. As far as more courtesy, I guess you are entitled to your opinion.Originally Posted by kngrsll ↑i am by no means an expert or professional in racing, but it is a hobby that i have huge passion for. I wouldn't have gotten anywhere without a lot of FREE help from good people, and when i get the occasional chance to give back and help someone out, i try to do it. So comments like that get under my skin. If you don't have time, i totally understand, but i think you can decline to help with a little more courtesy.
I can post and do my job from my desk.😉 Leaving to pick up, box and ship parts is not part of my daily routine.Originally Posted by cali yaris ↑+1 !
umm... and you seem to have enough time to post a lot. just saying... 🙂
people will always dick other people over, that is part of life. I know that, everyone knows that so you aren't onto anything new there. But in my life, i would rather give someone the benefit of the doubt until they prove that they deserve otherwise. And that apparently, is the difference in opinion so there is no point in going on any further on the subject.Originally Posted by Jason@SportsCar ↑On the other side of he coin, I have been at this for a long time and have seen people benefit from my (and others) generosity. Example, helped a guy out with a set of usable tires we no longer needed, he sold them instead of using them as intended. So excuse me if I don't rush off to give away parts. As far as more courtesy, I guess you are entitled to your opinion.
UPS just dropped off the new clutch, pressure plate and flywheel. This is going to have to wait a few weeks to get installed.
Fenders are done, looks funny with a 205-50-15 under there.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
I kinda like the fender flares, but are they necessary with only 205/50's?
Also, are those Rota Flights installed?
Also, are those Rota Flights installed?
Those tires were for our test day, took them off the ITA Miata we built a few years back, for now they just hold the car up. We will race on a 23-9.5-15 bias slick (which is 10.4" wide).Originally Posted by SilverBack ↑I kinda like the fender flares, but are they necessary with only 205/50's?
Also, are those Rota Flights installed?
No, those are Motegi Traklites.
any shots of the install? I'd like to see how much fender you cut away under there.
In the rear I cut away about .75", and nearly 2" in the front. The rear flares are at the same height as the OE fender, while the fronts are up .5" for extra compression travel.Originally Posted by cali yaris ↑any shots of the install? I'd like to see how much fender you cut away under there.
did your cuts include the bumper (plastic), or only towards the top, taking away metal fender material?
Both. Just in case we end up staying with the 15"s we wanted to make sure we had lots of clearance - had we committed to 13"s I would have installed the flares without touching the fenders. But we cut away enough material to make up for the weight of the fiberglass flares.Originally Posted by cali yaris ↑did your cuts include the bumper (plastic), or only towards the top, taking away metal fender material?
thanks, that is helpful. I don't want to cut my fenders for the 13's unless I have to.
When we did the math for the 13" slicks, 20-9.5-13 (10.5" wide by 20" dia) we found that the car would hit the ground before it hit the stock fenders. In fact we were only going to be able to lower a .5" from where it is now and be able to maintain what we thought as enough ground clearance.Originally Posted by cali yaris ↑thanks, that is helpful. I don't want to cut my fenders for the 13's unless I have to.
Your A6s are a little taller (20.9" for the 255), the rear should be fine, the front could be close under compression. If in doubt, pick up some bone yard fenders to hack up.
I'm probably going to raise it a 1/2" and see where that leads me. I'm also putting in the AOE front sway bar, that should help cut the roll just a little bit more.
did you manage to find the problem of the misfire on cylinder 1 ?
It is being addressed wed and thurs.Originally Posted by aucorium ↑did you manage to find the problem of the misfire on cylinder 1 ?
Heading off to the dyno/tuner.
Then up to Toyota in the AM.
Hope we get it all worked out.
Then up to Toyota in the AM.
Hope we get it all worked out.
good luck!
We had a combination of issues.... The fuel injectors were to big, and someone used the more is better method of tuning.
We installed new plugs and did a baseline run with the Camcon off, the ECU was just flooding the car. It was pulling max fuel trim, 40%, and it was still super rich. Turned the Camcon on for the next run and it was worse, they were adding fuel. The car did not want to idle, and was fouling the plugs. We can only assume it was tuned for FI, and never re-tuned after they pulled it. 🤷 Shame, because they left power on the table.
Our tuner made a number of adjustments and actually got the AFR really good, picked up some power too. But in the end the ECU was still trying to pull fuel back due to the injectors.
Went to Toyota today and they replaced them with a OE set of Yaris injectors. The ones in the car were out of a 2003 Celica.
We recalibrate the Camcon to work with the smaller injectors, makes really good power now. 🎉
We installed new plugs and did a baseline run with the Camcon off, the ECU was just flooding the car. It was pulling max fuel trim, 40%, and it was still super rich. Turned the Camcon on for the next run and it was worse, they were adding fuel. The car did not want to idle, and was fouling the plugs. We can only assume it was tuned for FI, and never re-tuned after they pulled it. 🤷 Shame, because they left power on the table.
Our tuner made a number of adjustments and actually got the AFR really good, picked up some power too. But in the end the ECU was still trying to pull fuel back due to the injectors.
Went to Toyota today and they replaced them with a OE set of Yaris injectors. The ones in the car were out of a 2003 Celica.
We recalibrate the Camcon to work with the smaller injectors, makes really good power now. 🎉
New life into an tossed aside icon.....very cool!
I wonder what really good power is...can you say?
I was asking the same thing 😈Originally Posted by cali yaris ↑I wonder what really good power is...can you say?
Less than your car. 😁 Final number will be printed in the magazine.Originally Posted by cali yaris ↑I wonder what really good power is...can you say?
Heading up to Willow Springs now.
So looking forward to Saturdays practice and qualifying in the rain. 🙁 I was able to score some "rains" from a buddy, which is just set of used Toyo R1Rs from his ST Civic. Not great, but unlike with the slicks I should be able to stay on the track. 👍
Five cars in H Prod, going to be fun.
Sat:
8:00am practice
11:30am qualifying
Sun:
8:00am warm-up
10:35am race
So looking forward to Saturdays practice and qualifying in the rain. 🙁 I was able to score some "rains" from a buddy, which is just set of used Toyo R1Rs from his ST Civic. Not great, but unlike with the slicks I should be able to stay on the track. 👍
Five cars in H Prod, going to be fun.
Sat:
8:00am practice
11:30am qualifying
Sun:
8:00am warm-up
10:35am race
What Magazine? When is it out? and is it available in Canada?Originally Posted by Jason@SportsCar ↑...Final number will be printed in the magazine.
SportsCar magazine is the official publication of SCCA -- he probably means that one?
Good luck this weekend, you're light, you'll do us proud out there!
Good luck this weekend, you're light, you'll do us proud out there!
Can't wait to hear how you did(and I'm in eastern time so I've already been waiting:D )
What a weekend... I experienced a lot of firsts. There was a bit of a let down, as three of the HP cars did not show. Apparently old British cars don't like the rain, so it was just me and the Honda - which has been the fastest car in HP this season in Socal.
My first time lapping in the rain with no defogger was interesting - well I had a defogger, it was a towel on the end of a stick. Twice a lap, on both straits, while travailing at a high rate of speed I had to pull the stick out of the drivers door and wipe the inside of the windshield so I could see. And the used Toyos were a bit slippery in the rain. Lucky that was just the first practice session.
The skies took it easy on us for qualifying, put the slicks on and went for it. Unfortunately, my transponder was not working - it was charged a month ago, and is supposed to last three months 😠 - so I got no times and had to start the race at the back of the pack. 🙁
The Sunday warm-up was full of some scary moments. I got the car on two wheels in the "balcony" turn. It is a banked 180 right hand turn, and there was enough grip to get a little tippy. I also believe I have done the first Yaris stoppie. 😲 I was trying to push my braking zone deeper in to turn 3, and hit the brakes a little to hard, an nice jolt forward and to the left. Philip was right behind me in our SSC Nissan and got a great view of it, he also got it on video.
Starting at the back you get a great view of all the madness going on. I quickly decided to hold back and wait for the field to thin out, it was an 18 lap race so there was plenty of time. The Honda was faster on corner exit and on the straits, he seemed to be geared way shorter than me, but I could get him going in the turns. I got a good run out of the "balcony" and passed him going in to 8. On the front strait he pulled me and dove right in front of me as we went in to 1. Then it got exciting... I don't know how I did not hit him (actually thought I did till I checked my front bumper in post race impound), turns out he cut a tire and nearly lost it in 1. When he checked up I nearly punted him. He went to the pits for a new tire, but in an 18 lap race it is all over if you have to do that, I ended up lapping him on the track.
So Toyota picks up its first SCCA National Club Racing win in HP with the Yaris. 👍
Best lap time: 1:41.778
The Honda never got up to speed after the tire change, and only clocked a 1:45.138 (he was in the 1:43s in qualifying).
Hopefully we will get the video up in the next few days.
The car ran great all weekend. Our only small issue was a check engine light, P0335 (crank angle sensor), but is did not slow us down one bit.
My first time lapping in the rain with no defogger was interesting - well I had a defogger, it was a towel on the end of a stick. Twice a lap, on both straits, while travailing at a high rate of speed I had to pull the stick out of the drivers door and wipe the inside of the windshield so I could see. And the used Toyos were a bit slippery in the rain. Lucky that was just the first practice session.
The skies took it easy on us for qualifying, put the slicks on and went for it. Unfortunately, my transponder was not working - it was charged a month ago, and is supposed to last three months 😠 - so I got no times and had to start the race at the back of the pack. 🙁
The Sunday warm-up was full of some scary moments. I got the car on two wheels in the "balcony" turn. It is a banked 180 right hand turn, and there was enough grip to get a little tippy. I also believe I have done the first Yaris stoppie. 😲 I was trying to push my braking zone deeper in to turn 3, and hit the brakes a little to hard, an nice jolt forward and to the left. Philip was right behind me in our SSC Nissan and got a great view of it, he also got it on video.
Starting at the back you get a great view of all the madness going on. I quickly decided to hold back and wait for the field to thin out, it was an 18 lap race so there was plenty of time. The Honda was faster on corner exit and on the straits, he seemed to be geared way shorter than me, but I could get him going in the turns. I got a good run out of the "balcony" and passed him going in to 8. On the front strait he pulled me and dove right in front of me as we went in to 1. Then it got exciting... I don't know how I did not hit him (actually thought I did till I checked my front bumper in post race impound), turns out he cut a tire and nearly lost it in 1. When he checked up I nearly punted him. He went to the pits for a new tire, but in an 18 lap race it is all over if you have to do that, I ended up lapping him on the track.
So Toyota picks up its first SCCA National Club Racing win in HP with the Yaris. 👍
Best lap time: 1:41.778
The Honda never got up to speed after the tire change, and only clocked a 1:45.138 (he was in the 1:43s in qualifying).
Hopefully we will get the video up in the next few days.
The car ran great all weekend. Our only small issue was a check engine light, P0335 (crank angle sensor), but is did not slow us down one bit.
Congratulations !!!!!!!!!!!!!!!!!!!!!!!
Hopefully the next one is a legit win.
Hopefully the next one is a legit win.
Over a second faster than "the fast guy's" qualifying time. Not too shabby! The Yaris has potential. Now your challenge is going to be to make absolutely certain that there's nothing technically illegal on the car. You can bet they'll be looking if you keep running that well!
I have been on the other end with a broken car. A win is a win, and I will take it however it comes. To finish first, first you must finish. 😉Originally Posted by markitect ↑Congratulations !!!!!!!!!!!!!!!!!!!!!!!
Hopefully the next one is a legit win.
Based on the prep we have done so far with were very happy with the performance, its only going to get faster. 😎
Post #191, nice summary! Thanks for keeping us posted.
Looking forward to the video.
Looking forward to the video.
Race ready
Picture not included in this copy
Got wide tires?
Picture not included in this copy
Picture not included in this copy
Got wide tires?
Picture not included in this copy
Video is up. Still waiting for the stoppie footage from our SSC car.
http://www.youtube.com/watch?v=4pkdQSV-x3M
http://www.youtube.com/watch?v=4pkdQSV-x3M
Very nice. I envy all your good weather and great tracks down south.
Video is up from our SSC Nissan Sentra.
Philip (SportsCar's editor) is racing the Sentra we built last season, and followed me around for a few laps during the warm-up session. He got a great view of the rear tires leaving ground, but was a little to far back to get a good shot with the camera.
http://www.youtube.com/user/SportsCa.../0/3P2RnB1de1Y
In-car from his race:
http://www.youtube.com/user/SportsCa.../1/_wBj1UFXSGE
Philip (SportsCar's editor) is racing the Sentra we built last season, and followed me around for a few laps during the warm-up session. He got a great view of the rear tires leaving ground, but was a little to far back to get a good shot with the camera.
http://www.youtube.com/user/SportsCa.../0/3P2RnB1de1Y
In-car from his race:
http://www.youtube.com/user/SportsCa.../1/_wBj1UFXSGE
how come no MICROIMAGE stickers are on that thing???Originally Posted by Jason@SportsCar ↑Race ready
Picture not included in this copy
Got wide tires?
Picture not included in this copy