Yarisworld Archive

Stay tuned

1,311 posts · 595,379 views · page 21 of 27

Replies continued

Bluevitz-rsOshawa, Ontario, Canada · Mar 30, 2012#1001
Can't wait to hear it on track. The sound of shifts on a close ratio gearbox is like sex!
Jason@SportsCarThread starterDebary, FL · May 4, 2012#1002
Originally Posted by Bluevitz-rs ↑
Can't wait to hear it on track. The sound of shifts on a close ratio gearbox is like sex!
Here you go: http://www.youtube.com/watch?v=LjOtkt34gJM

2-3-4-5 all used at Buttonwillow, a shift every 1500rpms. The close-ratio gears rock. 👍
Bluevitz-rsOshawa, Ontario, Canada · May 4, 2012#1003
Sweeeet!! Sounds like 4th gear could have been a hair longer though but close gears are so much better.
Jason@SportsCarThread starterDebary, FL · May 4, 2012#1004
Originally Posted by Bluevitz-rs ↑
Sweeeet!! Sounds like 4th gear could have been a hair longer though but close gears are so much better.
No, 5th needs to be shorter, its not 1-1. 😉
Jason@SportsCarThread starterDebary, FL · Aug 30, 2012#1005
Heading up to Buttonwillow this weekend for the final Double National road race of the season before the Runoffs. Looks like a good H Prod field, with five cars. Unfortunately Jamie could not make it, so the 2012 Yaris will sit this one out.

http://www.calclub.com/html/html2/ar...2-Schedule.pdf
fnkngrvIn The Hotbox · Aug 30, 2012#1006
Best of luck...I have the last LSR this weekend and am hoping to break the record that I set in July.
Jason@SportsCarThread starterDebary, FL · Sep 4, 2012#1007
Well the race on Saturday did not go to plan, six laps into the race after stating on the pole I had half a lap on the rest of H Prod... Then a flat tire. DNF.

Picture not included in this copy

Sunday started first again, and cruised around just fast enough to win the race.

Being the last class of the day there was a lot of junk on the track, so easy to pick up something a kill a tire.
cali yarisCanoga Park, CA · Sep 4, 2012#1008
Looks like you were ready to drag race instead....at least it was something out of your control.
justjesusOrange County · Sep 4, 2012#1009
OUCH!
man, that really sucks!!!
justjesusOrange County · Sep 4, 2012#1010
Originally Posted by Jason@SportsCar ↑
Unfortunately Jamie could not make it, so the 2012 Yaris will sit this one out.

http://www.calclub.com/html/html2/ar...2-Schedule.pdf
Maybe I will work on my competition license, so if you ever need a back up driver....hehehehe
Jason@SportsCarThread starterDebary, FL · Sep 5, 2012#1011
In less than a week our cars ship to the Runoffs... So this is the perfect day to order a new final drive gear set, six new wheels, and 18 more tires. I think its going to be a bit of a thrash come the weekend.
Jason@SportsCarThread starterDebary, FL · Sep 7, 2012#1012
Here are a the opening laps from Sundays race (from the 2nd place finisher). I was sleeping at the start, expected them to wave the green much later down the strait, so I was not paying attention and in the wrong gear. 😆

http://www.youtube.com/watch?v=53SGe...ature=youtu.be
ilikericesavannah, ga · Sep 7, 2012#1013
entertaining to watch his rear view mirror. Congrats
Jason@SportsCarThread starterDebary, FL · Sep 7, 2012#1014
Following last weekends race we decided to make a few changes to the 99 car... While overall we have been extremely happy with it this year - the close-ratio gear set Micro Image found is awesome, and the Loyning's head with Jun cams is a big leap over our previous setup - but I just could not match the corner speed of the new 2012 car.

So calls were made, parts were ordered, and we will now be running a setup much closer to the one on the 2012. The 13" wheels are coming off, and we will move up to the taller and wider 15" Hoosier slick. To offset the new tires bigger circumference the trans had to come out and the the stock final drive was replaced with the xB gear set. Then the ride height goes down, and spring rates go up.

We think this is a step in the right direction, but its to late to turn back now. 😳 I sure hope this is the last trans I pull this year. 😆

I cant thank the guys at Cage Toyota (final drive set), Kaaz (gear swap), Eibach (springs), Hoosier (tires) and the Tire Rack (wheels) enough. I thought it would be impossible to do this in the short amount of time we had, but they all got me the stuff I needed in short order.

Picture not included in this copy
Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Sep 7, 2012#1015
Can't go wrong with rpf1's
Jason@SportsCarThread starterDebary, FL · Sep 10, 2012#1016
Re-geared trans is in. New springs, ride height and alignment set. New wheels and tires on. Just needs a bath and then ready for the Runoffs at Road America.

Picture not included in this copy
xnamerxxso cal · Sep 10, 2012#1017
Car looks fantastic, I bet it runs better than it looks 🎉
justjesusOrange County · Sep 10, 2012#1018
That wheel/tire combo and new ride height is just perfect
Jason@SportsCarThread starterDebary, FL · Sep 10, 2012#1019
Great shot from the Buttonwillow race.

Picture not included in this copy
b20vtegmaricopa, az · Sep 10, 2012#1020
Originally Posted by Jason@SportsCar ↑
Great shot from the Buttonwillow race.
indeed 👍
Jason@SportsCarThread starterDebary, FL · Jan 9, 2013#1021
Time for some off season updates...

Less than thrilled with the other options we have used in the past, we got Porterfield to cut down a set of Hawk DTC-60 pads from a different application to fit the Yaris. So looking forward to trying these out at the Auto Club Speedway U.S. Majors Double National in a few weeks. 👍

Picture not included in this copy

Also time for a steering wheel upgrade. The NRG unit is inexpensive, and works great, but with no power steering (and wide slicks, a diff and power) it is hard to grip the leather wheel for 40mins. Bought myself a late xmas present, a suede OMP wheel.

Also picked up a Longacre mirror. I don't really need the extra field of vision, but we found a cool side effect using this type of mirror... If you have your video camera mounted in the car the camera can pick up nearly everything going on behind you - picture in picture. 😆

Picture not included in this copy
xnamerxxso cal · Jan 9, 2013#1022
Jason were those brakes originally from a mustang? They look very similar.
Jason@SportsCarThread starterDebary, FL · Jan 9, 2013#1023
Originally Posted by xnamerxx ↑
Jason were those brakes originally from a mustang? They look very similar.
No, it is an Alcon/AP Racing monobloc pad.
Jason@SportsCarThread starterDebary, FL · Jan 25, 2013#1024
I seem to have the worst luck with pulleys. This time the woodruff key failed. Stock pulley going back on.
Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Jan 25, 2013#1025
Add another pin 180 from the stock one
xnamerxxso cal · Jan 25, 2013#1026
How did you manage that one? Do you think its a pully issue or just the fact your running 500+ rpms over stock? In either case that sucks.
Jason@SportsCarThread starterDebary, FL · Jan 25, 2013#1027
Originally Posted by xnamerxx ↑
How did you manage that one? Do you think its a pully issue or just the fact your running 500+ rpms over stock? In either case that sucks.
I think RPM related. Pegged the limiter (7300) a few times due to standing water on the track, 3rd gear wheel spin.
FHT_RacingHouston, TX · Jan 26, 2013#1028
YIKES :/
Jason@SportsCarThread starterDebary, FL · May 13, 2013#1029
Decided to play with the rear toe settings on the Yaris... Based on what Bobby tried I decided to go with a smaller washer - I still wanted to maintain some rear toe in for high speed stability.

The car had 1/4" (total) toe in, so I started with a nice set of AN .032 washers. These were a perfect fit, did not even require any trimming to get around the hub. The surprise was these put me at an 1/8" (total) toe out. That was a much bigger swing than I expected.

Picture not included in this copy

So I went and picked up some sheet metal, 22ga and 26ga, to make some shims. The 22ga put the rear at 1/16" (total) toe out. The 26ga resulted in zero toe. I am going to give it a try with zero, but I may also pick up some 30ga material to make another set, which would hopefully let the car settle in with just a tiny bit of toe in. Something about 100mph in to the Kink at Road America or Turn 9 at Willow Springs that makes me think a little toe-in would be a good thing.

Once I have a thickness I like I am going to make a one-piece shim that covers both holes on the appropriate side of the hub.

Picture not included in this copy
cali yarisCanoga Park, CA · May 13, 2013#1030
1/4" in to 1/8" out? That is a big change. Will be good to see how you like 0 toe.
FHT_RacingHouston, TX · May 13, 2013#1031
Yep. Definitely interested.
Jason@SportsCarThread starterDebary, FL · Aug 5, 2013#1032
Started the prep for the 2013 Runoffs this past weekend. Pulled out my engine and installed the old Bestwick one - which makes more power. 😎

While draining all of the fluids I noticed the TRD thermostat in my engine had a tear in the internal seal. So far it had not been an issue, but it could have caused the unit to get stuck eventually, also could mean loose rubber bits floating around in the engine. The Cosworth unit in the other engine still looked like new, the size of the seal and the build quality look much better.

Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
xnamerxxso cal · Aug 5, 2013#1033
Anything exciting in store for this motor?
ilikericesavannah, ga · Aug 5, 2013#1034
How did the 0 Toe work for you?
Jason@SportsCarThread starterDebary, FL · Aug 5, 2013#1035
Originally Posted by xnamerxx ↑
Anything exciting in store for this motor?
Nothing yet. But it made more HP than mine, and I think mine is due for a head gasket - it got a little hot the last time I ejected a crank pulley.
Jason@SportsCarThread starterDebary, FL · Aug 5, 2013#1036
Originally Posted by ilikerice ↑
How did the 0 Toe work for you?
No discernible difference in the handling. Its FWD, it just wants to go strait. 😆
Jason@SportsCarThread starterDebary, FL · Aug 7, 2013#1037
While swapping engines I noticed the stock clutch line was starting to weep around one of the crimp fittings, not wanting to risk bashing the insides of my close-ratio gear box it was time for an upgrade. So I ordered the stainless steel braided unit from Micro Image, it should be more than up to the task.👍

Picture not included in this copy
Jason@SportsCarThread starterDebary, FL · Aug 30, 2013#1038
The 99 car is ready to race again... The good motor is in and tuned, alignment is set, new front fenders without flares are on. Next stop, Buttonwillow this weekend for a Cal Club SCCA Double Rational race weekend.

After this event last year I pulled the trans and changed the final drive, swapped all the 13" wheels for 15" wheels and made some suspension changes - I could not get my car on 13"s to go as fast as the Bestwick Yaris on 15"s. 😠 If all goes well this weekend I will only need a fresh set of tires and a car wash before the Runoffs. 👍

Picture not included in this copy
xnamerxxso cal · Aug 30, 2013#1039
Gotta say the car looks better without those flares, nice and clean looking now.


BTW are you running the 4.3 final drive or the 4.1?
racerbLeland, NC · Aug 30, 2013#1040
Looking good, kick butt this weekend!!
Jason@SportsCarThread starterDebary, FL · Aug 30, 2013#1041
Originally Posted by xnamerxx ↑
Gotta say the car looks better without those flares, nice and clean looking now.


BTW are you running the 4.3 final drive or the 4.1?
I just wish it would not require so much work to remove the rears. The radial slicks are so much skinnier I no longer need them.

4.3 is in the car now. I could certainly use something closer to 4.1 for the 2015 Runoffs at Daytona. At least I have almost two years to find one.
Jason@SportsCarThread starterDebary, FL · Sep 3, 2013#1042
Man was it hot at Buttonwillow, in the upper 90s both days, wearing a black drivers suit makes it absolutely brutal. 🙁

There were a total of four cars in HP, and about 23 in our run group. My only plan for this event was to make sure everything was good with the old Bestwick engine that I just installed, so I did not push it real hard, the engine ran like a champ. I took the HP win both days, putting the rest of the HP cars a lap down on Sunday, and ran .5sec faster than last year.

Picture not included in this copy

On the list of things I should have done years ago... I have had a box full of sensors for my AiM MXL dash just collecting dust for the last three years. I picked up a Micro Image Oil Sandwich Adaptor, it has three 1/8" NPT ports, which allowed me to easily hook up my oil pressure and oil temp sensors.
This made it super easy to hook up, fit perfect, and no leaks. 👍 Oil pressure was solid throughout the race, and the highest oil temp I saw was 238f. Considering how hot it was, and we are spinning this engine to 7300rpm, I was happy to see the oil under 250f. Happy that I don't need to install an oil cooler, but in the future for these summer races I may switch from XP1 Driven Race Oil (5W-20) to XP3 (10W-30) just to give myself a little more cushion.

Picture not included in this copy

One of the fun things Cal Club does with this event is Saturday movie night. They had a great Taco bar and showed Cars 2 on the side of a transporter. 😆

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Sep 3, 2013#1043
I love racing communities. Everyone is willing to help everyone.

Any vid clips from the weekend?
Jason@SportsCarThread starterDebary, FL · Sep 3, 2013#1044
Originally Posted by Bluevitz-rs ↑
I love racing communities. Everyone is willing to help everyone.

Any vid clips from the weekend?
Not sure if I got anything on Saturday, forgot to put the camera in before I got in the car, and I am not sure if the person who put it in for me got it set right. But I should have some from Sunday, although nothing terribly exciting. Will work on getting it up later this week.
Jason@SportsCarThread starterDebary, FL · Sep 9, 2013#1045
Man has the year gone by quick... On Thursday we load up and make the long tow to Road America in Elkhart Lake, Wis. In an effort to get every bit of speed on those long straits I built added a little aero treatment on the front. The only disappointment being I have remove/install it to get the car off and on the trailer. But chances are it will only last one race anyway, its so low the first time I dip a tire its going to hit the ground. 😆

Picture not included in this copy
justjesusOrange County · Sep 9, 2013#1046
Movie night, on the side of a transport....awesome!

The lip looks good
racerbLeland, NC · Sep 9, 2013#1047
Good Luck at the Run-Offs!!

If you see Anna Neave, tell her I said Hello, she will be working Timing & Scoring.....

racerb 😁
Jason@SportsCarThread starterDebary, FL · Oct 30, 2013#1048
Just picked up the B-Spec Yaris from storage, it is taking its final ride, giving its parts to rebuild the H Prod car. In a few weeks the leftovers will head to the crusher after only being raced twice.


Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · Oct 30, 2013#1049
Well at least they get a chance to get used and shown off instead of just getting scrapped.
Jason@SportsCarThread starterDebary, FL · Dec 23, 2013#1050
I just leave this here...

Picture not included in this copy