I don't think there is enough material there to pull that off. If you want to dial preload out you only need an adjustable link on one side, so you can always split a pair. In my case the mount on the strut it adjustable.Originally Posted by Bluevitz-rs ↑Was just looking at the end links for the sway bar. Looks like you could cut and thread one if you needed adjustment.
Stay tuned
1,311 posts · 595,379 views · page 23 of 27
Replies continued
Still trying to get data from Toyota. Typical rule of thumb (for equal OD) is a 20% change in stiffness, 40% change in weight.Originally Posted by CrankyOldMan ↑The funny thing about torsion is that it's almost entirely carried by the outer diameter of the shaft, so the rate shouldn't be significantly softer. I've tried looking at Toyota parts sites for a 2015, but most don't carry anything newer than 2014.
I have an Echo so Mine are connected to the control arms with the standard rubber sway bar end links.
Wow...the front sway bar variants for the models. I am also interested in that 2012 sway bar and links. Great find!
Its back on the ground.
Picture not included in this copy
Picture not included in this copy
Base rack (its actually the one out of the old car, which actually came out of a sedan). With the EPS removed I don't want to further increase steering effort, and for road racing the quicker rack really isn't necessary.Originally Posted by Thirty-Nine ↑Looks great! Are you using the OE steering rack or perhaps one from a Yaris SE (faster ratio)?
I want to gut mine out now.
Can you use the fog light holes for anything? Brake cooling or intake?
Sent from my iPod Touch
Sent from my iPod Touch
Yeah, but then that whole "now with more road noise and less functionality" business kicks in. =)Originally Posted by WorkTL ↑I want to gut mine out now.
Fine with me!
Is it possible to remove the EPS unit without going to a custom steering shaft?
Personally I think these look so much better than the 2nd gen..
You can just unplug and remove the electric motor. We did that the first year because the system did not work when we got the old car. Steering effort is very heavy because you are still turning parts in the column, and the shaft itself is very heavy.Originally Posted by ArmstrongRacing ↑Is it possible to remove the EPS unit without going to a custom steering shaft?
I know some people think its sporty to disable the EPS, but its only got to slow you down in Solo. Its also worth noting that a lot of the Prepared and Mod Solo guys are incorporating Toyota EPS into builds. Unless you are prepared to go all the way keep what you have.
Very true Jason.
I unplugged the eps motor once and drove around the block....VERY heavy. I wrote it off at that point.
I unplugged the eps motor once and drove around the block....VERY heavy. I wrote it off at that point.
The new car is almost ready, got the wrap done and the new rear windows in. The Yaris brand manager and TMS wanted to take advantage of the Yaris being a "world car", so they aligned the graphics with the WRC program. Very happy with how it turned out.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Good googly moogly. You've single handedly made me a fan of the 3rd gen. 👏
Wow looks awesome! I like the giant mouth look at the front LOL
That looks really good Jason! This thing looks like a track monster now!
What suspension and wheel/tire setup are you running? Are those RPF1's 15x7 +35 and Hoosier tires 205/50R15 profile? If so, then did you have to do any fender work to use this setup at the current ride height?
What spring rates are you running both front and back? What is the dampening set at?
What suspension and wheel/tire setup are you running? Are those RPF1's 15x7 +35 and Hoosier tires 205/50R15 profile? If so, then did you have to do any fender work to use this setup at the current ride height?
What spring rates are you running both front and back? What is the dampening set at?
Looks AWESOME!
Although I am sure they are your sponsor, Monster sponsor is the most annoying. I automatically relate Ken Block to Monster and that guy isn't that great of a driver. Cool video's, but when it comes to competition, he just doesn't match up to those who are seriously good at it.
Although I am sure they are your sponsor, Monster sponsor is the most annoying. I automatically relate Ken Block to Monster and that guy isn't that great of a driver. Cool video's, but when it comes to competition, he just doesn't match up to those who are seriously good at it.
You may be curious as to how his first race with the new car went. 😉
Monster is not one of my sponsors, they are on the car because Jamie Bestwick is going to guest drive it at a couple of events this year, and they support him.Originally Posted by ilikerice ↑Looks AWESOME!
Although I am sure they are your sponsor, Monster sponsor is the most annoying. I automatically relate Ken Block to Monster and that guy isn't that great of a driver. Cool video's, but when it comes to competition, he just doesn't match up to those who are seriously good at it.
Took the car out to Buttonwillow Raceway for a shake down, just as quick as the old car only more stable, making it easier to drive at the limit. Had planned to sign up for the track day portion of the event, but the tech crew got me a log book in time for qual so I entered the race.
Started on the pole for the entire group, and took the overall win, first time I have ever done that. Lowered the track record I sat for this configuration in 2013 by 3.5sec (the track has gotten faster since they repaved last year, so this was expected).
Very happy with the car, no hiccups whatsoever. 🎉
Picture not included in this copy
Started on the pole for the entire group, and took the overall win, first time I have ever done that. Lowered the track record I sat for this configuration in 2013 by 3.5sec (the track has gotten faster since they repaved last year, so this was expected).
Very happy with the car, no hiccups whatsoever. 🎉
Picture not included in this copy
Outstanding 👏
Congrats.. You think the body style helps a lot with the stability because of the aerodynamics compared to the 2nd gen?
Its due to the longer wheelbase.Originally Posted by ilikerice ↑Congrats.. You think the body style helps a lot with the stability because of the aerodynamics compared to the 2nd gen?
Thanks.Originally Posted by Thirty-Nine ↑This is the first '15 that I have found attractive. Looks great and congrats!
Now its on to the Rose Cup and then the 4th of July Majors at PIR.
A few laps from BWRP on Sunday in the new car. Reset the lap record on lap 3. Great fun leading the group to the green, and talking the overall win: https://www.youtube.com/watch?v=-1O1YcEYsr4
Forgot to post much in the way of updates lately... After the Buttonwillow warm up the car went to Portland for the Rose Cup races. Jamie Bestwick qual second, and won the Friday race after Indycar vet turned H Production racer Parker Johnstone broke.
Picture not included in this copy
In qual for the Saturday race Bestwick got caught up in some oil from a blown up American Sedan Camaro, and found the tire wall in Turn 12. Toyota lined up a loaner car from a local dealer so we could make repairs, but we elected to call it with one win in the books and headed home. Sadly this meant I also missed the July 4th Majors race a few weeks later, but since I was already qualified for the Runoffs it did not matter.
Picture not included in this copy
We had to replace the hood, drivers fender, door, lights and bumper. We were able to get most of the parts from a 2014 prototype. We actually rebuilt the car as a 2014 so we could take Bestwick out testing.
Picture not included in this copy
Picture not included in this copy
Just picked up the 2015 bodywork yesterday, and we will be putting that on for the Runoffs at Daytona. I like the 2014 nose better.
We have also been working on a new engine for Daytona, fingers crossed its ready in time.
Just had the spare trans checked out, and the OS Giken LSD adjusted with a little hotter setup. The off the shelf setup has been pretty good, but they said they can dial in a touch more lock up since we are running such a sticky tire.
Picture not included in this copy
Picture not included in this copy
In qual for the Saturday race Bestwick got caught up in some oil from a blown up American Sedan Camaro, and found the tire wall in Turn 12. Toyota lined up a loaner car from a local dealer so we could make repairs, but we elected to call it with one win in the books and headed home. Sadly this meant I also missed the July 4th Majors race a few weeks later, but since I was already qualified for the Runoffs it did not matter.
Picture not included in this copy
We had to replace the hood, drivers fender, door, lights and bumper. We were able to get most of the parts from a 2014 prototype. We actually rebuilt the car as a 2014 so we could take Bestwick out testing.
Picture not included in this copy
Picture not included in this copy
Just picked up the 2015 bodywork yesterday, and we will be putting that on for the Runoffs at Daytona. I like the 2014 nose better.
We have also been working on a new engine for Daytona, fingers crossed its ready in time.
Just had the spare trans checked out, and the OS Giken LSD adjusted with a little hotter setup. The off the shelf setup has been pretty good, but they said they can dial in a touch more lock up since we are running such a sticky tire.
Picture not included in this copy
Have you guys still been running the original motor you built years ago?
Sent from my iPod Touch
Sent from my iPod Touch
The head that is in the car now was built in 2010, but the bottom end was new in 2012. It did not get used in 2011 or 2013, so its still in good shape.Originally Posted by Bluevitz-rs ↑Have you guys still been running the original motor you built years ago?
Sent from my iPod Touch
The spare we are rebuilding was all new in 2012, and has not been run since the end of that year. Now it is getting fitted with custom pistons, upgraded rods and better valve springs.
Very cool. I guess you're raising the CR an RPM limit.?
Sent from my iPod Touch
Sent from my iPod Touch
Can't get enough of these updates. So cool.
Compression will only go up a little, class limit for our car is 11:1, but we are looking for another 1000rpm to deal with the top speeds at Daytona - it should also help with the gap between 4th and 5th because I will be able to shift later.Originally Posted by Bluevitz-rs ↑Very cool. I guess you're raising the CR an RPM limit.?
Sent from my iPod Touch
Just waiting for the custom pistons to be finished.
Picture not included in this copy
Picture not included in this copy
#carbonerOriginally Posted by Jason@SportsCar ↑Just waiting for the custom pistons to be finished.
Picture not included in this copy
So pretty.
Picture not included in this copy
Picture not included in this copy
Will the rotating assembly be balanced?
Sent from my iPod Touch
Sent from my iPod Touch
Yes, including the flywheel and crank pulley.Originally Posted by Bluevitz-rs ↑Will the rotating assembly be balanced?
Sent from my iPod Touch
Should have it all back in about a week.
My Loyning head with Jun cams only had one season on it, so there was no reason to send it to the engine builder for a refresh. However, with the much higher RPM expectation it was time for a valve spring upgrade. BC springs and retainers in.
Picture not included in this copy
Picture not included in this copy
Pics coming in from the engine builder.
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Geez look how smooth that crank is. Nice!
Wow, very nice!
Bottom end is built, crated, and should arrive here on Friday. 🤤 Then I get to slap the head on it and toss it in the car.
This is so Epic. Im glad to see you used CP, we use them in our Subaru builds! Great product!
What are you pushing for whp on race day? This thread is awesome to follow, I love hearing all the mods you've made to the Yaris, keep at it.
More than the stock 106hp. 😉Originally Posted by tmontague ↑What are you pushing for whp on race day?
W/ the wins that you've racked up I would think so
Might as well freshen up the clutch while the car is apart. New OS Giken floating clutch disk and pressure ring.
Picture not included in this copy
Picture not included in this copy
Cool, it's like a multi plate style cluch.
Cant believe how quick we went from parts to complete short block. 🎉
Picture not included in this copy
Picture not included in this copy