Yarisworld Archive

Rear suspension

257 posts · 100,812 views · page 5 of 6

Replies continued

mrbondIllinois · Apr 21, 2011#201
Wow, I can't believe I've never seen this before!
I just did this yesterday - took me an hour and a half. Removing the bolts and raising the rear suspension beam was the easy part, as long as the springs were removed and the struts were unbolted from the shock tower. The hard and annoying part was getting the bolt to line up in its new hole.
Impression: the car feels more squat during acceleration, and there's less body pitch noticeable during acceleration. In the corners, the handling is much more predictable and assuring. If any of you have lowered your cars, do this! It's free (the best kind of mod), and it makes a noticeable difference.
Lil AbnerDublin, Ohio · Apr 21, 2011#202
Yeah, but a word of caution, I'm lowered on DF210's, and I'm having issues with hitting in the rear. The brackets that hold the brake lines are hitting the frame on small bumps. I already cut the welds off and moved the brackets, but I'm still hitting on something on larger bumps. Next week I'll put it back on my lift and see what else needs to be moved.
mrbondIllinois · Apr 21, 2011#203
You're still using stock shocks though, correct? I have the tokico blues and DF210's, and I haven't had any issue with the torsion bar or anything attached to it hitting the frame. This mod is probably best suited for those with upgraded shocks, but it'll work either way.
Lil AbnerDublin, Ohio · Apr 21, 2011#204
Yeah, stock shocks. But for some reason the rear of my car is also sitting lower than other DF210 installs. I also live in Michigan, were the roads are very un-friendly.
mrbondIllinois · Apr 21, 2011#205
If they're anything like Chicago roads, I sympathize.
Lil AbnerDublin, Ohio · Apr 21, 2011#206
Yeah, they are like Chicago roads. Not as bad as the ones I had to deal with in Detroit.
mazillaSan Jacinto California · Apr 22, 2011#207
Originally Posted by Lil Abner ↑
Yeah, stock shocks. But for some reason the rear of my car is also sitting lower than other DF210 installs. I also live in Michigan, were the roads are very un-friendly.
I was having your same problem last week after doing this mod. How many miles on your stock shocks? My rears were dead, so I bought a new set off Ebay(33.00 each) and the problem is gone. I has three people in the car the other day, no rubbing. Of course tires/wheels/etc are a factor...
Lil AbnerDublin, Ohio · Apr 22, 2011#208
The car has about 43,000 miles on it. I've only had the springs on for maybe 5,000 miles. I'd hope the rear shocks aren't dead that quick!!!
mazillaSan Jacinto California · Apr 22, 2011#209
Originally Posted by Lil Abner ↑
The car has about 43,000 miles on it. I've only had the springs on for maybe 5,000 miles. I'd hope the rear shocks aren't dead that quick!!!
Easiet way to tell is just to pull one and test it out, takes about 15 minutes and it may solve your problem. I had no way of knowing how many miles were on my shocks, but I imagine it was much more than 40ish.

(I have df210's as well)
TickleTimeTimArkansas · May 4, 2011#210
so i wanna try this in the next week, running tigertecs and stock shocks. good or bad idea?
why?harnett county NC · May 7, 2011#211
try it and see what happens, it sounds like it isn't that hard to undo if you don't like the result. I'd suggest grabbing aftermarket shocks though too.
Autocross72Seattle · May 17, 2011#212
Tomorrow I am moving the Opel GT to the shed so I can have room in the garage to install the coil-oversvon my Yaris. While I am at it I am going to relocate the axle to the upper pivot point. I am going to look at detouring the brake lines so they don't hit/rub on the frame. I'll also check to make sure the exhaust is out of the way. Thanks for all the tips in this forum

What I am really wondering is what the effect of raising the roll center is, which was brought up by DocB a few posts up. He didn't really explain what the effect is, or if it is a good or bad thing in the case of am lowered Yaris.
Lil AbnerDublin, Ohio · May 17, 2011#213
Actually, it's not the roll center that is changed. The roll center only applies to an independent suspension like we have in the front of the car. Talking to some suspension guys, they said it helps bring the rear specs back to factory, as well as the squatting characteristics during acceleration and braking.

I'm not having a problem with my exhaust, but I'm hearing something else hitting back there still. I haven't had time to put it back on the lift to see. I'm pretty sure the exhaust is clear of everything. The brake line brackets will probably need to be moved. I just cut the welds off, and rotated the bracket towards the inside of the car, then re-welded. You could also use some big band clamps. I'll be waiting to see what you come up with if you find other things that might hit!
Autocross72Seattle · May 19, 2011#214
I have the springs and shocks removed and the axle in the upper mounts. I used a floor jack to raise the axle as high as I could without letting the jack hit the fuel pump. The bracket for the brake lines is pretty close to the frame. Maybe that is what is hitting for some people. I took a bunch of pictures, but apparently I can't upload them from my iPad. I'll send them from my computer tomorrow.

I took the advice and cut the beakers off the top of the axle and welded them to the side of the axle. Now there is muCh more clearance.
importfantasyMt. Airy, MD · May 19, 2011#215
hi everyone. just a heads up I did this little trick on my 07 LB lowered on df210s and everything worked out fine. I just bought a new 2010 LB, lowered it and went to change the pivot point but ran into a problem. removed the bolt, moved the bushing up to 2nd hole, put bolt back in but IT WOULDNT THREAD! after further inspection the inner hole has nothing to thread into, just a hole. maybe they removed this on the 2010+ I dont know. my car is USDM spec 3 door. something to keep in mind for you brand new yari owners
marcustoronto, canada · May 19, 2011#216
this is interesting......
Lil AbnerDublin, Ohio · May 19, 2011#217
Originally Posted by importfantasy ↑
hi everyone. just a heads up I did this little trick on my 07 LB lowered on df210s and everything worked out fine. I just bought a new 2010 LB, lowered it and went to change the pivot point but ran into a problem. removed the bolt, moved the bushing up to 2nd hole, put bolt back in but IT WOULDNT THREAD! after further inspection the inner hole has nothing to thread into, just a hole. maybe they removed this on the 2010+ I dont know. my car is USDM spec 3 door. something to keep in mind for you brand new yari owners
Hmm. My 2009 had thread, but it was slightly rusty. An impact wrench got mine in. Are you 100% positive there are no threads? Did you try putting the bolt in there without the suspension in the way?
Autocross72Seattle · May 19, 2011#218
I still haven't had time to put the rear shocks and springs in, so today I decided to push the rear axle up by hand until it hit something. Guess what it hit! The gas tank!!!! For some reason there part of the tank flares out at the top right over the axle. That is the part that the axle hits. Here is a picture of the scuff mark the axle made on the tank just by me pushing it up by hand.

1 attachment not included in this copy

Lil AbnerDublin, Ohio · May 19, 2011#219
What part of the axle hit that? The beam that connects both sides? I'm hoping to get mine on the lift tomorrow to see what I'm hitting...
Autocross72Seattle · May 19, 2011#220
Here is a picture of the empty spring perches when the axle is touching the gas tank. The tape measure shows 6 inches, so if your springs and shocks can allow your axle to compress this far, you NEED bump stops!

1 attachment not included in this copy

Autocross72Seattle · May 19, 2011#221
Here is what the wheels/tires look like when the axle is touching the gas tank. These are 17" wheels with 205/50 tires. It looks sweet, but, something tells me that driving with the rear axle hitting the gas tank could be hazardous to your health!

My car is a 2008 3 door by the way

1 attachment not included in this copy

Lil AbnerDublin, Ohio · May 19, 2011#222
The tank hits with the wheels only that far up?? Hmm. My rear tires are that "tucked" just sitting in the garage...
Autocross72Seattle · May 19, 2011#223
Yes, it was the beam that spans the middle. I looked carefully around the ends, and everything looked clear there.
Lil AbnerDublin, Ohio · May 19, 2011#224
Well, I guess I'll do what you did in the photos with mine and see what's what. I'll try to post photos tomorrow night.
Autocross72Seattle · May 20, 2011#225
Cool! I'll be interested to see what you find.
derickveliz2Central, MA · May 20, 2011#226
Subscribed!
importfantasyMt. Airy, MD · May 20, 2011#227
Originally Posted by Lil Abner ↑
Hmm. My 2009 had thread, but it was slightly rusty. An impact wrench got mine in. Are you 100% positive there are no threads? Did you try putting the bolt in there without the suspension in the way?
yes there are no threads. this is a pic of the inner hole.

1 attachment not included in this copy

Lil AbnerDublin, Ohio · May 20, 2011#228
Originally Posted by importfantasy ↑
yes there are no threads. this is a pic of the inner hole.
That's strange there is no thread in there!! Must have been part of cost cutting.
Lil AbnerDublin, Ohio · May 20, 2011#229
I also see marks where mine is hitting the gas tank. I put green tape over the marks for the pictures so it's easy to see where they are.
Picture not included in this copy

Picture not included in this copy

Passenger Side:
Picture not included in this copy

Driver Side:
Picture not included in this copy

This is the lowest point for me. I measured 11.25" center of wheel to the fender.
Picture not included in this copy

My problem is, my rear sits at 12.5" So that 1.25" of travel seems easy for me to hit. I might have to install some bump stops...
Autocross72Seattle · May 20, 2011#230
Last night I was looking around and found that summitracing.com has several styles of cheap bump stops available. With just a bit of fabrication, the should work fine. My first priority, though, is to get my coil-overs installed so I can get the car back on t he road though. My Dodge 2500 cummins is beast, but is a bit expensive to use as a daily driver!
Jason@SportsCarDebary, FL · May 20, 2011#231
Originally Posted by YarisSedan ↑
Picture not included in this copy
Picture not included in this copy
This does not look good to me... Moving the front of the axle up puts the lower rear spring perch at a bad angle. You now have a lot of side loading on the spring. 🙁

On top of that the axle hits the gas tank? 😲

Either of the first two would stop me from doing this mod... But the bigger reason not to (for me) is there are almost no SCCA classes (until you get up to Mod - no, not Steet Mod - I'm talking full tube-frame Mod classes) that allow suspension pick up points to be moved. If you want to change the toe, install the shims. 🤷
Autocross72Seattle · May 21, 2011#232
For me the SCCA rules don't really matter since I have a Street Mod2 1972 240Z (thus the username/email). I'm just trying to make my daily driver fun to drive.

I do agree that the springs seem to have an awful lot of side load, which doesn't seem good.

I don't think raising the pivot point is the CAUSE of the axle hitting the gas tank. That would be due to ride height & supnsion travel. The axle would still hit the gas tank if the lower pivot is used if the ridevheight is too low, or the suspension compresses too much.
Lil AbnerDublin, Ohio · May 21, 2011#233
Well, the stock suspension already puts the spring perch at a bad angle. Moving the axle position up just puts it back to factory.

But yeah, the downside seems that it's hitting the gas tank. With the the axle in the stock position, it will NOT hit the gas tank. It only hits due to the axle being higher. The spot it hits on the gas tank isn't the side of the tank, but the TOP flange.
dobbiedooStoughton,Ma · Jun 5, 2011#234
What about adding a 3rd hole between the 2 stock holes?
miketejeroPhilippines · Jun 16, 2011#235
This has got to be the most "eye-opening" thread I've read so far. I'll look under my car about this. Thanks guys.
YarisSedanCalifornia - Bay Area · Jun 18, 2011#236
So I work at a new shop now that has a hunter laser alignment machine and put my car on it and checked the spec for the rear alignment after doing this mod. Surprisingly all my rear specs for caster camber and toe were all within green and very close to perfect. Its been awile since I had an alignment and my mods in the back are trd springs swaybar and this rear mod. So apparently shifting it does correct alignment issues from lowering the car.
Kaotic LazagnaCentral Valley, CA · Jun 19, 2011#237
Originally Posted by YarisSedan ↑
So I work at a new shop now that has a hunter laser alignment machine and put my car on it and checked the spec for the rear alignment after doing this mod. Surprisingly all my rear specs for caster camber and toe were all within green and very close to perfect. Its been awile since I had an alignment and my mods in the back are trd springs swaybar and this rear mod. So apparently shifting it does correct alignment issues from lowering the car.
Does the rear axle hit your rear lower tie bar? I want to re-try this "mod", but I'm pretty low on S.Tech's, and I don't want the axle hitting my rear lower tie bar.
marcustoronto, canada · Jun 19, 2011#238
Should be more worried hitting your gas tank... So I've heard.
YarisSedanCalifornia - Bay Area · Jun 19, 2011#239
Ive taken my rear lower tie bar few days after doing this mod due to it hitting it on bumps.
Kaotic LazagnaCentral Valley, CA · Jun 19, 2011#240
Originally Posted by marcus ↑
Should be more worried hitting your gas tank... So I've heard.
hahaha, yeah, I was just wondering if it was touching/hitting the tie bar, since it was, then for sure it would be hitting the gas tank. Looks like I won't be re-trying this "mod" again.
YarisSedanCalifornia - Bay Area · Jun 19, 2011#241
Ive only hit my gas tank maybe twice and only on a really huge bump with the car really loaded when i had my factory shocks. Once switching to tokikos i havent had issues since.
Kaotic LazagnaCentral Valley, CA · Jun 19, 2011#242
Originally Posted by YarisSedan ↑
Ive only hit my gas tank maybe twice and only on a really huge bump with the car really loaded when i had my factory shocks. Once switching to tokikos i havent had issues since.
Are you on the Blues or Reds? Also, I'm lower than you and only on TRD shocks, so it's not as dampened as yours =\
my2senseVancouver, BC · Apr 3, 2012#243
Sorry to revive a 10 month old thread but I just got a Yaris LB with M2 lowering springs and am interested to see if anyone can provide any long-term update on this mod.

1) Any solution to the rubbing talked about in this thread?
2) Are you using aftermarket struts/shocks?

Thanks
Lil AbnerDublin, Ohio · Apr 3, 2012#244
I've been running this mod for over a year with well over 40,000 miles of Michigan roads. I have stock shocks and DF210 springs. The rear springs have rubber inserts to stiffen the back up. The inserts fixed the rubbing of the suspension member on the fuel tank. Also, when I took the car in for an alignment, there were no changes that needed to be made.
Autocross72Seattle · Apr 3, 2012#245
I moved mine back to the stock holes until I could get some bump stops. Then I started autocrossing the car and I really like how the car handles as is, so I decided to leave it. It enters the corners very predictably and if I trail brake int the corner I can get the rear to rotate for me. When the rear rotates, it is so controlled and predictable that I didn't want to take the chance of messing that up. By the way I have a 2008 3door LB with Megan Racing coil-overs, UltraRacing rear brace, and A rear swaybar that I think is 22 mm. For racing I turn the rear dampers all the wy up.
why?harnett county NC · Apr 23, 2012#246
so for those who have had problems, are your running a full interior or have you removed any rear interior pieces?
Autocross72Seattle · Apr 24, 2012#247
I am running stock interior, including spare tire.
yaris 2szgreece · Apr 27, 2012#248
i think that the upper holes are for the 4wd version
sheekeebutMississauga, GTA, Toronto, ON · Jul 22, 2014#249
Wait, what? AWD? Which country?
why?harnett county NC · Jul 23, 2014#250
Originally Posted by sheekeebut ↑
Wait, what? AWD? Which country?
japan, and other countries that get Japanese cars. Toyota, and other Japanese car companies give their home market a hell of a lot more toys than they give us.