Replies continued
Black_griffin6Atlanta Georgia · Jun 23, 2011#201Hey guys, I just bought the stuff to do this with.
I got the insulation and the zip-ties, and now I need to get the tape to reflect the heat.
I've got a few concerns though...
What if moisture gets under the insulation? The pipe won't rust will it? I'm rather worried about the long-term affects.
I'll give it a whirl anyway seeing as how nobody has said anything bad about it. 😁
poorsh2ne ct · Oct 15, 2011#202I put the insulation on with ss "zip ties" you can get them at harbor freight
Em_Laval, Canada · Jun 29, 2012#203i tried it and it melted , it's a fire hazard from my point of view even with reflecting tape,
if the car burns the insurance won't cover
the only solution would be exhaust insulating fabric
teddyOntario, Canada · Jun 30, 2012#204 Originally Posted by LugNut ↑
There's definitely more cooling capacity, but at the cost of fuel economy. Before I could barely detect a difference in lugging of the engine with the compressor engaged. But now there's a big AC load on the engine.
Is this true? I can't see how insulating a line would actually affect the load of the compressor. It should simply be reducing the lost cooling in the pipes.
PatrickJohnsonMurfreesboro, TN · Jul 1, 2012#205 Originally Posted by
Em_ ↑ i tried it and it melted , it's a fire hazard from my point of view even with reflecting tape,
if the car burns the insurance won't cover
the only solution would be exhaust insulating fabric
Then you did it wrong. I've had mine on for years now, with no issues.
Bluevitz-rsOshawa, Ontario, Canada · Jul 1, 2012#206 Originally Posted by
Em_ ↑ i tried it and it melted , it's a fire hazard from my point of view even with reflecting tape,
if the car burns the insurance won't cover
the only solution would be exhaust insulating fabric
here's an example of what not to use and what you should've used...
http://www.thesolarshop.eu/acatalog/...nsulation.html CoryMWhite Rock BC · Jul 1, 2012#207 Originally Posted by
teddy ↑ Is this true? I can't see how insulating a line would actually affect the load of the compressor. It should simply be reducing the lost cooling in the pipes.
First time seeing this topic. My concern would be that you are removing some of the engineering that was so carefully put into the A/C system. By this I mean that the liquid coming out of the compressor needs to evaporate completely. Some of which is expected to be done in that line (not where you want it, but they probably allow for the loss). If it stays liquid the compressor tries to do the impossible and compress the incompressible (liquid). This would explain the extra load noticed when the a/c is on. Basically the compressor pistons are in mild hydraulic lock (and hating it). Compressor life will be reduced.
Probably less likely in ridiculously hot/arid places where the evaporator will deal with it. But in humid areas, or more sane temperatures, you may run into this.
Cheers.
schumePNW · Jul 2, 2012#208 Originally Posted by
CoryM ↑ My concern would be that you are removing some of the engineering that was so carefully put into the A/C system. By this I mean that the liquid coming out of the compressor needs to evaporate completely. Some of which is expected to be done in that line (not where you want it, but they probably allow for the loss). If it stays liquid the compressor tries to do the impossible and compress the incompressible (liquid).
You could be right and they might have engineered the A/C system to compensate for the loss due to uninsulated suction lines. I insulated my line and I only use the A/C when it's hot, so I'm sure I'm getting good evaporation. Maybe if I ran the A/C on cold below a certain temperature, I could start having problems.
The accumulator is there to prevent any liquid from reentering the compressor, but I guess we'll wait and see if there are a lot of A/C failures reported in the future :)
CoryMWhite Rock BC · Jul 3, 2012#209 Originally Posted by
schume ↑ I only use the A/C when it's hot, so I'm sure I'm getting good evaporation. Maybe if I ran the A/C on cold below a certain temperature, I could start having problems.
Do you have the a/c disabled during defrost?
As I said, I am not certain that you would end up w/ liquid. It's certainly possible, and hearing that guys are noticing more load on the engine makes it seem more probable. 🤷
Cheers.
RedRideMiddletown, NY · Jul 5, 2012#210 Originally Posted by
schume ↑ You could be right and they might have engineered the A/C system to compensate for the loss due to uninsulated suction lines. I insulated my line and I only use the A/C when it's hot, so I'm sure I'm getting good evaporation. Maybe if I ran the A/C on cold below a certain temperature, I could start having problems.
The accumulator is there to prevent any liquid from reentering the compressor, but I guess we'll wait and see if there are a lot of A/C failures reported in the future :)
One must consider that the AC sys is designed to work under all extremes of ambient temps.
So, I don't see how adding a bit of insulation to simulate lower ambient temps will be detrimental.
schumePNW · Jul 7, 2012#211 Originally Posted by
CoryM ↑ Do you have the a/c disabled during defrost?
Oh yeah! I hated that "feature" and was happy to disable it :)
Originally Posted by RedRide
One must consider that the AC sys is designed to work under all extremes of ambient temps.
So, I don't see how adding a bit of insulation to simulate lower ambient temps will be detrimental.
I agree and I personally don't think it's a big deal either (or else I wouldn't have done the mod)
swiddCentral Alabama, GOD BLESS AMERICA · Jul 11, 2012#212I've had mine insulated for 3 years or something now, and left it on during cold season, and have never restricted my use of A/C when cold outside. No problems at all, and the high temperature resistant tape holds up nicely.
yours_falselyIndiana · Aug 13, 2012#213So now that some time has passed since it's first been tried, what I'm taking from this is that there don't seem to be any long term negative effects. Correct?
PatrickJohnsonMurfreesboro, TN · Aug 13, 2012#214I'm at 2 or 3 years, and no problems here.
yarisitisCalifornia · Apr 20, 2013#215For those of you who first did this mod in 2009, how's it holding up? Any negative effects on the AC system? Foam melting?
Betriventedmonton · Apr 20, 2013#216I did this a year or two ago. The insulation right above the exhaust manifold has melted slightly, otherwise it's help up fine. Didn't REALLY notice a big difference though, but every little bit counts!
AlexrahlSmithfield va · Apr 21, 2013#217I did this on my car. Aluminum taped rated to 300f. Wrapped the low pressure line over pipe insulation. It is definitely colder now.
rningonfumesSoCal · Aug 2, 2016#218Sorry for necroposting.
Can someone entertain some questions?
1.First does anyone have pics from the original post?
2. Has anyone quantified the change? As in a before and after. I realize the OP did it.
So I stuck a meat thermometer in various circumstances. 1. Idle with fan at low. 2. Idle with fan at max (4). 3. 3k RPM fan low. 4. 3k RPM fan max (4).
1. Gave me a reading of 44. 2. Gave me 47. 3. gave me 45. 4. gave me 45. ** I'll do the measurements again tomorrow these are off the top of my head. In all scenarios the fan is set to face and the window vents are closed. Thermometer is in the right center vent. *degrees Fahrenheit.
3.I've been reading a lot here and whatever google pulls up for me. It only gets cold after passing through the expansion valve. Where is the expansion valve in our car?
4. That cold piping that people say they are wrapping, isn't that piping that comes out from the evaporator which is the exit flow back to the compressor?
Here are some pics form a different member who applied insulation.
DIY A/C low pressure line insulation