Yarisworld Archive

Yaris Dyno charts

260 posts · 848,025 views · page 5 of 6

Replies continued

catliektheifLeesburg, VA · Nov 20, 2013#201
Had some fun today :D
a/t
MI pulley
DC header
aFe intake
TRD axleback

Picture not included in this copy

the car dyno'd before me was a gtr, so the guy pulled this out for shits and gigs

Picture not included in this copy


sorry, id upload the screen shots but dynojet/winpep wont run on my mac

I was a little disappointed i was hoping to atleast break 100.. but whatever its fun :D
Will-I-AmThe Netherlands · Nov 20, 2013#202
my little track 1NZ-FE

Picture not included in this copy

Picture not included in this copy

120,7 HP
168 NM Torque
tooterLos Angeles · Apr 28, 2014#203
Since no one has updated this thread since last year, there are a few dyno charts I can throw onto to the pile... 😉

Red is baseline with exhaust and intake mods.
Blue is tooter intake manifold
Green is tooter intake manifold with 1ZZ throttle body


Picture not included in this copy

This was the tooter et experiment.

Red regular tooter intake manifold with 1ZZ throttle body
Blue tooter et intake manifold with 1ZZ throttle body

Picture not included in this copy

Red is stock intake manifold with stock throttle body

Blue is tooter I.V intake manifold spacer with stock intake manifold and stock throttle body

Picture not included in this copy
YarisPRMayaWest, Puerto Rico · May 10, 2014#204
129whp 120tq
Engine
2.5" Intake
1zz TB
1zz IM ('95-00)
Port & Polish Head
Prius pistons
NST 10% underdrive pulley

Tuned w/ ApexNeo and 91 octane

Picture not included in this copy
Bluevitz-rsOshawa, Ontario, Canada · May 10, 2014#205
^ wow

Any details in your engine build? Any other mods required to run the Prius pistons?
mario98cPuerto Rico · May 11, 2014#206
Originally Posted by Bluevitz-rs ↑
^ wow

Any details in your engine build? Any other mods required to run the Prius pistons?
No mods required to install the prius pistons.

Sent from my SAMSUNG-SM-N900A using Tapatalk
tooterLos Angeles · May 11, 2014#207
Hey Mario... 🙂

Can you post a pic of your engine? I'd love to see it.


Greg
fnkngrvIn The Hotbox · May 11, 2014#208
Originally Posted by YarisPR ↑
129whp 120tq
Engine
2.5" Intake
1zz TB
1zz IM ('95-00)
Port & Polish Head
Prius pistons
NST 10% underdrive pulley

Tuned w/ ApexNeo

Picture not included in this copy

I think that a couple valid questions would be what does it run down in PTR for port/polish on the head and what the overall investment really is with the list of mods you have in place.

sent from my m-o-b-i-l-e
YarisPRMayaWest, Puerto Rico · May 11, 2014#209
Originally Posted by fnkngrv ↑
I think that a couple valid questions would be what does it run down in PTR for port/polish on the head and what the overall investment really is with the list of mods you have in place.

sent from my m-o-b-i-l-e
The car had 112whp before the Pistons ($295 with rods), P&P $260
And the 1zz IM $153 (traded a Tundra TB for it)

Obviously this doesn't include labor
Bluevitz-rsOshawa, Ontario, Canada · May 11, 2014#210
Did the A/F ratio change much after the piston install?


Sent from my iPod Touch
YarisPRMayaWest, Puerto Rico · May 12, 2014#211
Originally Posted by Bluevitz-rs ↑
Did the A/F ratio change much after the piston install?


Sent from my iPod Touch
I couldn't say, cause we used a tune from another yaris with the prius pistons, untill we go to the dyno
JrengeltVenezuela · May 23, 2014#212
Hi everyone,

I'm new here..... i need your help ... i want to buy a Blitz Supercharger for my yaris but the people who are selling me the product have one for a Yaris 1NZFE 1.5L . I was wondering if this supercharger will fit to my car?, I have the 2NZ-FE is a 1.3 L (1298 cc) version built in Japan.

They said it will fit "only" if the intake manifolds are the same....
Really i don't if they are the same??

Please somebody knows this??

Thank you so much for all your help.

Regards.

JC
why?harnett county NC · May 23, 2014#213
Originally Posted by Jrengelt ↑
Hi everyone,

I'm new here..... i need your help ... i want to buy a Blitz Supercharger for my yaris but the people who are selling me the product have one for a Yaris 1NZFE 1.5L . I was wondering if this supercharger will fit to my car?, I have the 2NZ-FE is a 1.3 L (1298 cc) version built in Japan.

They said it will fit "only" if the intake manifolds are the same....
Really i don't if they are the same??

Please somebody knows this??

Thank you so much for all your help.

Regards.

JC
CTScott might be able to tell you if the part numbers are the same, try and pm him.
salmanghiyasPakistan · Jul 25, 2014#214
What could be the dyno results after putting a 1zz tb and stock 1zz IM into my 1nz 2008 yaris
tooterLos Angeles · Jul 26, 2014#215
Originally Posted by salmanghiyas ↑
What could be the dyno results after putting a 1zz tb and stock 1zz IM into my 1nz 2008 yaris
I run a 1ZZ throttle body on an Aluminum 1ZZ intake manifold that I adapted to fit my 2012 1NZ Yaris.

Picture not included in this copy


These are dyno results...

RED: 1NZ intake manifold with 1NZ throttle body
BLUE: 1ZZ intake manifold with 1 NZ throttle body
GREEN: 1ZZ intake manifold with 1ZZ throttle body

Picture not included in this copy

As you can see, the gains were modest.


Greg
crazylegsWinnipeg, canada · Aug 12, 2014#216
damn add me to a list to get one of those intake manifolds lol

i andriod dyno'd my little ApeTurd last night and averaged 88hp, and just also broke into the 11 second 0-60 mark once out of 3 attempts it was so sad lol
tooterLos Angeles · Aug 17, 2014#217
Sorry, man... there are no more tooter aluminum intake manifolds available. Check with "Malibu" on this forum. He had one that might still be for sale.

Greg
JimKellyfanthe good Carolina · Oct 21, 2014#218
Originally Posted by cali yaris ↑
From a magazine, s/c Yaris:

http://www.turbomagazine.com/tech/07...fications.html

Picture not included in this copy
That article link was a good read.
I definitely want coil overs and a roll bar now.

Workin on switchin to 16 inch rims with Michelin Pilot Sport AS 3's next.
My favorite rim choice at the moment is the 4 bolt Helium or Feather black.
Thanks for the good article link/read Cali
JimKellyfanthe good Carolina · Oct 21, 2014#219
Originally Posted by crazylegs ↑
my little ApeTurd
hahahahahaha

LMFFAO

😆👏🍻🤣
mario98cPuerto Rico · Feb 22, 2015#220
118whp Dynojet
Mods:
Custom intake with velocity stack (no air filter)
2" exhaust catless with stock resonator and DC Sports muffler
NST 10% Underdrive Pulley
DC Sports Header
Intake Manifold thermal gasket
Knock sensor relocated
91 oct gasoline

Picture not included in this copy
scod4025Sacramento · Mar 25, 2015#221
Ok so need to get on this thread as well

Picture not included in this copy

103.4 WHP
this is with the automatic
tooterLos Angeles · May 16, 2015#222
What kind of chart is that?
Makes my eyes cross. 😆


Greg
scod4025Sacramento · May 17, 2015#223
I cant say its what they gave me but don't think it was a very good pull as I drive an auto and every time he would floor it it would down shift to second then sift back up to 3rd half way through the pull but what ever I am on the board
fnkngrvIn The Hotbox · May 17, 2015#224
Originally Posted by scod4025 ↑
I cant say its what they gave me but don't think it was a very good pull as I drive an auto and every time he would floor it it would down shift to second then sift back up to 3rd half way through the pull but what ever I am on the board
Weird
AzianCuzLong Beach, CA · Oct 9, 2015#225
So I messed around and did a Dyno but it wasn't "DynoJet" the guys at MotoIQ says that the DynoJet would have about 30HP over their Dyno. Anyways I got it done with the Blitz S/C on off which gave me 66 on their dyno which would be about 96 on the dynojet and then they tested with the Blitz S/C on which is the picture I posted. Not sure what any of it means though... 😕

Picture not included in this copy
fnkngrvIn The Hotbox · Oct 11, 2015#226
Can't really read it?

Sent from my SCH-I545 using Tapatalk
fnkngrvIn The Hotbox · Jan 21, 2016#227
Made 315whp and 219tq on a Mustang Dyno.

Would be roughly 350/240 on a DynoJet.

Picture not included in this copy

Sent from m-o-b-i-l-e
Bluevitz-rsOshawa, Ontario, Canada · Jan 21, 2016#228
Wow look at those RPMs!!

What does the torque curve look like if it peaks at 7300?
fnkngrvIn The Hotbox · Jan 21, 2016#229
Still building power at even 8k. The plan once we clean up a few issues is to go back down again, turn up the boost, and set the limit at 8500.



Picture not included in this copy

Sent from m-o-b-i-l-e
Bluevitz-rsOshawa, Ontario, Canada · Jan 21, 2016#230
Torque is the blue line right...

Not too bad. Pretty flat for how high it peaks.
ern-dizCA all day · Jan 21, 2016#231
Geez louise, 350 bhp.

No joke.
tmontagueCaledonia Ont. · Jan 21, 2016#232
You almost hit numbers as high as I do on my Yaris🙄
All jokes aside, that's an awesome power curve
fnkngrvIn The Hotbox · Jan 21, 2016#233
Originally Posted by Bluevitz-rs ↑
Torque is the blue line right...

Not too bad. Pretty flat for how high it peaks.
Yeah, torque is blue.

Sent from m-o-b-i-l-e
crazylegsWinnipeg, canada · Feb 10, 2016#234
Ok so just out of curiosity stock MTX yaris's will get between 90-100whp, I/H/E = 95-105whp, I/H/E + 1ZZTB&IM = 105-112whp, I/H/E/TB/IM/ + pnp head & prius pistons = ~129whp. what about valve jobs and cams could you in theory squeeze out another 10whp out of this engine. Even if we could hit 140whp looking at these numbers really makes me want to do some research the 2ZR-FE I4 swap and hope for ~135whp before having to crack open the engine.
fnkngrvIn The Hotbox · Feb 10, 2016#235
Originally Posted by crazylegs ↑
Ok so just out of curiosity stock MTX yaris's will get between 90-100whp, I/H/E = 95-105whp, I/H/E + 1ZZTB&IM = 105-112whp, I/H/E/TB/IM/ + pnp head & prius pistons = ~129whp. what about valve jobs and cams could you in theory squeeze out another 10whp out of this engine. Even if we could hit 140whp looking at these numbers really makes me want to do some research the 2ZR-FE I4 swap and hope for ~135whp before having to crack open the engine.
Your best bet is to start a new thread and also do some more searching on the forum as it has been discussed several times. This thread is really for Dyno work as the subject states. Not trying to be a douche outright. Just want to keep it on topic.

The quick and dirty though:

Cams: regrinds are around $760 for the cams and that includes only the grind work. A pair of JUN cams direct from them as of 3 years ago was around $1000-1100 for the set.

Pistons, gaskets, head studs, etc: $800+ ?

IHE: I would think that unless you do all of the work yourself to include the exhaust work you are easily looking at $1200-1500.

Then you need engine management. PnP harness and Camcon and FIC other the likes from Greddy and you are looking at another $1000 in parts.

Then there is any associated labor involved that you would not be completing yourself plus the additional basic tuning along with continued tuning every so often.

Just in parts you are looking at easily 4k for decent quality parts. Then labor, tuning, upkeep.

I would think that the 2zr swap would be a much more feasible and reliable route unless you are a person that really enjoys the whole performance modded lifestyle.

Sent from m-o-b-i-l-e
paulelhardcoreknoxville · Jan 16, 2017#236
So far for all motor you can get almost 140 hp. Can you get more. I am trying to find out what will be max that engine can hold all motor?
fnkngrvIn The Hotbox · Jan 16, 2017#237
Originally Posted by paulelhardcore ↑
So far for all motor you can get almost 140 hp. Can you get more. I am trying to find out what will be max that engine can hold with turbo
You want to see how much power it can produce with a stock bottom end and a turbo?

Sent from m-o-b-i-l-e
paulelhardcoreknoxville · Jan 19, 2017#238
So far for all motor you can get almost 140 hp. Can you get more. I am trying to find out what will be max that engine can hold all motor? Could go 160hp on all motor???
malibuguyWestminster, MD · Jan 23, 2017#239
Dyno'd tonight to baseline on the dyno the car will be tuned on once Im done the turbo fabrication. Was told this dyno tends to read low. Well I have higher numbers then what I had 2 years ago on a different dyno (both dynojet).

I think the ECU has worked around the Tooter and given me some good numbers compared to when I first installed it and dyno'd it right away. Previous was 104/103 and prior to the Tooter was 107/104, both on the other dyno.

Picture not included in this copy
fnkngrvIn The Hotbox · Jan 26, 2017#240
Originally Posted by paulelhardcore ↑
So far for all motor you can get almost 140 hp. Can you get more. I am trying to find out what will be max that engine can hold all motor? Could go 160hp on all motor???

Best to either do a search here or start a new thread. This one is for Dyno results.

Sent from m-o-b-i-l-e
MugenRepCentral Pennsylvania · Jan 27, 2017#241
You can think 2zr-fe, or you can buy a 02-05 Civic Si with a K20a3, take out backseat and other items and end up with a 2500lb. car with 160whp (including full breathing bolt-ons), or just add a 3-lobe K-series head and have 200whp, or a full swap with a head an K24a1 bottom end and end up with 230whp. Either way, all of this is subjective. It's about YOUR car and not about what a dyno sheet tells you. Enjoy, build, drive and avoid the dyno numbers.🤘
rabbitoThailand · Sep 23, 2017#243
pretty crazy to see all these past dyno sheets...

Sent from my SM-N920C using Tapatalk
remcafeeArizona · Mar 22, 2019#244
mine made 121 at the wheels with dc header, 2.25 inch exhaust with magnaflow spun cat and vibrant hot dog resonator, custom fog light cold air intake, and jun mild cams.
Alain93Florida · Mar 31, 2019#245
Originally Posted by remcafee ↑
mine made 121 at the wheels with dc header, 2.25 inch exhaust with magnaflow spun cat and vibrant hot dog resonator, custom fog light cold air intake, and jun mild cams.
Did you tune it also? If so what did you use?

Sent from my SM-T530NU using Tapatalk
remcafeeArizona · Apr 5, 2019#246
Originally Posted by Alain93 ↑
Did you tune it also? If so what did you use?

Sent from my SM-T530NU using Tapatalk
no tune, oem ecu and everything
Vios96Malaysia · Feb 17, 2020#247
Sorry to bump up an old thread, but I just want to know if gaining 111hp and 145nm on wheels is decent enough on stock internals? Dyno-ed on DynoJet
Modifications are as listed:
- Ram pipe, pod filter
- 1zz throttle body
- 2az fuel injector (330cc)
- 4-1 headers
- 2 inch exhaust piping with one resonator and a 2 inch muffler which is the HKS Hi-Power muffler
- lighten crank pulley.
- piggyback to tune all of this mods.

Note that internals are still stock. Intake manifold is still the stock yaris 1nzfe. This is all the external mods that has been done. Just want to know if this gains is somewhat okay with the mods I have put in. I am just curious and wondering how some can manage to do a 120hp and 150 or 152nm. I am not trying to get very high numbers just wondering if it also depend on the tuner on how they feel comfortable at tuning it. Thanks!
Turbiinifinland · Jan 12, 2021#248
2NZ-FE turbo

2 attachments not included in this copy

rayfloyd170SAUDI ARABIA · Mar 9, 2021#249
Originally Posted by Turbiini ↑
2NZ-FE turbo
probably 2nzfe on meth.🙇
Turbiinifinland · Mar 9, 2021#250
Originally Posted by rayfloyd170 ↑
probably 2nzfe on meth.🙇
e85