TWSS! 🤣Originally Posted by lilredrocket ↑Glad you got it up!!
Yaris Dyno charts
260 posts · 848,025 views · page 3 of 6
Replies continued
would be helpful to list mods in your post too...
OK, here is the darkened scan.
Relevant mods:
NST 10% UD CR-lite pulley
Thunder Axle-back Exhaust
TRD CAI w/ WeaponR Secret Weapon dry element filter (also, bypass coupler replaced w/ plain coupler.)
Air Temp: 78*F (@ intake, according to SGII)
Relative Humidity: 77%
Bar. Pressure: 30.20 inches (steady)🙂
Picture not included in this copy
Relevant mods:
NST 10% UD CR-lite pulley
Thunder Axle-back Exhaust
TRD CAI w/ WeaponR Secret Weapon dry element filter (also, bypass coupler replaced w/ plain coupler.)
Air Temp: 78*F (@ intake, according to SGII)
Relative Humidity: 77%
Bar. Pressure: 30.20 inches (steady)🙂
Picture not included in this copy
1 attachment not included in this copy
Picture not included in this copy
nice!
To bad the guy printed off your lowest pull
dynojet dyno - -106.1whp and 107.1 wtq with intake, after-resonator exhaust and 87 octane, no other mods
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Nice! Looks like we've identified the benchmark hp/tq for the NA Yaris: better breathing. Your numbers are just a flip=flop of mine. Gotta love that flat torque curve. Are you running the stock crank pulley?
BTW - what brand of dyno?
BTW - what brand of dyno?
dynojet dynoOriginally Posted by ozmdd ↑Nice! Looks like we've identified the benchmark hp/tq for the NA Yaris: better breathing. Your numbers are just a flip=flop of mine. Gotta love that flat torque curve. Are you running the stock crank pulley?
BTW - what brand of dyno?
only mods were intake and res-back exhaust...everything else is stock
Hey barber,
What kind of res back exhaust? You got 5 or 6 hp out of it. Is it really, really loud?
Thanks,
Talc
What kind of res back exhaust? You got 5 or 6 hp out of it. Is it really, really loud?
Thanks,
Talc
custom 2.25" crush-bent aluminized steelOriginally Posted by talcum ↑Hey barber,
What kind of res back exhaust? You got 5 or 6 hp out of it. Is it really, really loud?
Thanks,
Talc
not too loud, but louder than the stock midpipe
Finally got my dyno sheet. Here are the two highest numbers from the two different days.
The 140whp/135tq number is without the custom overdrive pulley.
The 136 whp/140 tq number IS with the pulley.
Decrease in overall whp, but a gain in torque.
As you can see, with the pulley on, it pulls stronger all across the board.
Picture not included in this copy
Meth/water injection and a tune are in the near future.
The 140whp/135tq number is without the custom overdrive pulley.
The 136 whp/140 tq number IS with the pulley.
Decrease in overall whp, but a gain in torque.
As you can see, with the pulley on, it pulls stronger all across the board.
Picture not included in this copy
Meth/water injection and a tune are in the near future.
Picture not included in this copy
Picture not included in this copy
just want to share some dyno results, please excuse me for the unclear scan.
Picture not included in this copy
just want to share some dyno results, please excuse me for the unclear scan.
Love that torque curve!Originally Posted by PETERPOOP ↑Finally got my dyno sheet. Here are the two highest numbers from the two different days.
The 140whp/135tq number is without the custom overdrive pulley.
The 136 whp/140 tq number IS with the pulley.
Decrease in overall whp, but a gain in torque.
As you can see, with the pulley on, it pulls stronger all across the board.
Meth/water injection and a tune are in the near future.
102whp Mods are Cai, NST 10% underdrive pulley and Trd Exhaust. Coming Soon DC header, Camcon and e- cutout
Picture not included in this copy
Picture not included in this copy
Ya sabia yo q tanta insistencia en correr tenia q ser por algo jajajajjaOriginally Posted by mario98c ↑102whp Mods are Cai, NST 10% underdrive pulley and Trd Exhaust. Coming Soon DC header, Camcon and e- cutout
Picture not included in this copy
Congrats! Y lo q falta todavia! vamo' alante!
BTW dame info del dyno pa ir
Anyone seen the sedan 1nz-fe automatic dyno?
Dyno chart of a Vios on a turbo kit, and later on with an upgraded ball bearing turbo.
Engine is stock, and automatic transmission is stock as well. The missing gap in the dyno chart was caused by the Okada Project coils interfering with the Dynojet's RPM reading.
More information can be found here.
Engine is stock, and automatic transmission is stock as well. The missing gap in the dyno chart was caused by the Okada Project coils interfering with the Dynojet's RPM reading.
More information can be found here.
1 attachment not included in this copy
200hp? niiiiice!
WOW, 29% increase in HP, and 24% incrase in TQ..........
So the only chang between the first and second graph is the new turbo?
Why the different redline?
Also, was it done on the same dyno?
Thanks
So the only chang between the first and second graph is the new turbo?
Why the different redline?
Also, was it done on the same dyno?
Thanks
Yup it was done on the same dyno, pretty amazing considering the engine is still stock and its running on an automatic transmission.
AFE CAI and 2" resonator-back mandrel bent exhaust with tri-flow muffler, otherwise stock Yaris.
Picture not included in this copy
Picture not included in this copy
69.3kw = 93whp....not bad....1.3L?
Actually, 1.5.. so it's pretty bad compared to what some of you are getting (>100whp?).. HAHAH =\
I'm guessing it's my tri-flow ruining my exhaust flow? What do you say Barber?
I'm guessing it's my tri-flow ruining my exhaust flow? What do you say Barber?
Went to the dyno with Mario98c
Mine (YarisPR) 107whp 98tq
-Intake(custom/home made)
-Header(ebay)
-Catless no resonator 2" exhaust with non-performance muffler
-NST 10% Underdrive Crank Pulley
-1zz TB
Picture not included in this copy
Mario98c 103whp 108tq
-Intake CAI (ebay)
-NST 10% Underdrive Crank Pulley
-Catless no resonator 2" exhaust with TRD muffler
Picture not included in this copy
Video Link
http://www.youtube.com/watch?v=c6AleRw2TYs
Mine (YarisPR) 107whp 98tq
-Intake(custom/home made)
-Header(ebay)
-Catless no resonator 2" exhaust with non-performance muffler
-NST 10% Underdrive Crank Pulley
-1zz TB
Picture not included in this copy
Mario98c 103whp 108tq
-Intake CAI (ebay)
-NST 10% Underdrive Crank Pulley
-Catless no resonator 2" exhaust with TRD muffler
Picture not included in this copy
Video Link
http://www.youtube.com/watch?v=c6AleRw2TYs
wow, i was really considering the blitz, but to get up to 130...man. i guess in our little car that's good, but i was hoping closer to 180 after s/c and header and pulleys, etc.
your numbers look fine, stock on a dyno dynamics is 86whpOriginally Posted by spookz ↑Actually, 1.5.. so it's pretty bad compared to what some of you are getting (>100whp?).. HAHAH =\
I'm guessing it's my tri-flow ruining my exhaust flow? What do you say Barber?
Here's my 109whp 106tq dyno pull 😁
-Intake (custom)
-1zz TB
-Header (ebay)
-Exhaust (custom catless)
-NST Underdrive Pulley
-Apex Neo (dyno tuned)
Picture not included in this copy
Here's the video
http://www.youtube.com/watch?v=US7JO9s3ZXQ
-Intake (custom)
-1zz TB
-Header (ebay)
-Exhaust (custom catless)
-NST Underdrive Pulley
-Apex Neo (dyno tuned)
Picture not included in this copy
Here's the video
http://www.youtube.com/watch?v=US7JO9s3ZXQ
well, i gave the yaris its final hurrah today
took it to forrest and forrest racing in ayr to run it on the dyno.
i ended up pulling 136whp and 130wtq
old pull was with intake and res-back exhaust (106whp/107wtq)
new pull was with same intake and res-back exhaust as well as dc header, blitz supercharger, 1zz injectors, colder iridium plugs (136.2whp and 129.8wtq)
im pretty happy with that.
Picture not included in this copy
took it to forrest and forrest racing in ayr to run it on the dyno.
i ended up pulling 136whp and 130wtq
old pull was with intake and res-back exhaust (106whp/107wtq)
new pull was with same intake and res-back exhaust as well as dc header, blitz supercharger, 1zz injectors, colder iridium plugs (136.2whp and 129.8wtq)
im pretty happy with that.
Picture not included in this copy
^ Very nice. Great that you recorded that for Yaris Historians everywhere!
ya, shows a consistent 25% at-wheel gainOriginally Posted by cali yaris ↑^ Very nice. Great that you recorded that for Yaris Historians everywhere!
Here is our latest... Stock motor with bolt-ons and an AEM EMS series 2.
This is on a Dynapak.
Picture not included in this copy
This is on a Dynapak.
Picture not included in this copy
^ how much power does the AEM EMS add on it's own?
this is my dyno run
I have:
DC sport headers
Nito exhaust (Tanks MicroImage)
Borla
Picture not included in this copy
Picture not included in this copy
Next mod, FIC and mayby... piston prius 13:1 compression with water/meth !!!
I have:
DC sport headers
Nito exhaust (Tanks MicroImage)
Borla
Picture not included in this copy
Picture not included in this copy
Next mod, FIC and mayby... piston prius 13:1 compression with water/meth !!!
Dyno pull...
Intake"custom" pvc made
1zz tb
header " toyota echo"
2" exhaust ending with Magnaflow " free flow 2 1/4"
Apex vafc
Some minnor problem with the air/ fuel @ 5.5_6.0
Intake"custom" pvc made
1zz tb
header " toyota echo"
2" exhaust ending with Magnaflow " free flow 2 1/4"
Apex vafc
Some minnor problem with the air/ fuel @ 5.5_6.0
1 attachment not included in this copy
2010 sedan, 27,2xx miles
-gutted air box
-removed snorkle
-Apex-i drop in high flow filter
-Amsoil Synthetic 0-20w & 75-90w
-Weapon-R header
-MBS Exhaust...2" mandrel bent with race 100cell catalytic converter
Picture not included in this copy
the green lines is after RS*R RanUp additive was added & cycled thru approximately 30min...
video;
http://www.youtube.com/watch?v=JIosaoHkS0c
-gutted air box
-removed snorkle
-Apex-i drop in high flow filter
-Amsoil Synthetic 0-20w & 75-90w
-Weapon-R header
-MBS Exhaust...2" mandrel bent with race 100cell catalytic converter
Picture not included in this copy
the green lines is after RS*R RanUp additive was added & cycled thru approximately 30min...
video;
http://www.youtube.com/watch?v=JIosaoHkS0c
Tuner did a conservative base tune to run in the engine
1 attachment not included in this copy
^ Amazing. 🙇 What's your boost?
But -- Power and torque don't cross until 7000? That's not quite right.
But -- Power and torque don't cross until 7000? That's not quite right.
Hi Garm,
That's because of 2 reasons:
1. The torque measurement is calculated using kg-m instead of ft-lbs
2. I didn't apply force scaling
Now they should be crossing after I've updated the torque measurement to ft-lbs and applied force scaling.
I'm running 23 psi of boost at the moment.
That's because of 2 reasons:
1. The torque measurement is calculated using kg-m instead of ft-lbs
2. I didn't apply force scaling
Now they should be crossing after I've updated the torque measurement to ft-lbs and applied force scaling.
I'm running 23 psi of boost at the moment.
1 attachment not included in this copy
That short runner intake manifold sure helps with the top end power, she wants to make power through redline - that's great!
What is your exhaust manifold design? I'm redesigning mine to try and regain some of that lost torque from the intake side.
and -- what fuel are you using for these numbers?
What is your exhaust manifold design? I'm redesigning mine to try and regain some of that lost torque from the intake side.
and -- what fuel are you using for these numbers?
Zoiks!
Hi garm, I am currently using Golden Eagle's intake manifold, however when they designed it for me it was still a prototype model.
I've yet to feedback to Bob Woodcock about it. I think I shall do it soon.
I am running on pump gas at the moment. Can't afford to use race fuel and drive around town to run in the engine, think I will break a big hole in my bank account if I do so :(
I've yet to feedback to Bob Woodcock about it. I think I shall do it soon.
I am running on pump gas at the moment. Can't afford to use race fuel and drive around town to run in the engine, think I will break a big hole in my bank account if I do so :(
Fucking nuts
Like crap?
Thats a shop here in Tampa. Are you sure that is for the 1nz?
this stuff is more exciting that porn! i want 400hp yaris! power to weight would leave mustangs and camaros in the dust.
After running in the engine, I had the car sent back for a tune today and things got interesting.
Blue curve - 404 whp, previous base tuning for engine run in, pump gas, 1.6 bar boost, no water/meth.
Red curve - 454 whp, pump gas, 1.7 bar boost, water/meth turned on.
Green curve - 501 whp, pump gas + avgas 50/50 mixture, 2.2 bar, no water/meth.
Blue curve - 404 whp, previous base tuning for engine run in, pump gas, 1.6 bar boost, no water/meth.
Red curve - 454 whp, pump gas, 1.7 bar boost, water/meth turned on.
Green curve - 501 whp, pump gas + avgas 50/50 mixture, 2.2 bar, no water/meth.
1 attachment not included in this copy
That's crazy - CONGRATS on pushing the 1NZ to the new record power levels. 2.2 bar is about 30 psi, right?
Any idea why the power is so much higher than the torque? The gap between the two seems to grow the higher you go with boost and power.
Any videos of a pull? I bet it sounds great at 8000 rpm.
Any idea why the power is so much higher than the torque? The gap between the two seems to grow the higher you go with boost and power.
Any videos of a pull? I bet it sounds great at 8000 rpm.
Hi Garm, I am currently uploading the video to YouTube at the moment.
Not sure why the torque curve is like this, maybe the 1NZ engine is not meant to produce a lot of torque?
But we do know that the power is still climbing at 8000 RPM. Not sure how it'll go if we give it another 1000 RPM.
Not sure why the torque curve is like this, maybe the 1NZ engine is not meant to produce a lot of torque?
But we do know that the power is still climbing at 8000 RPM. Not sure how it'll go if we give it another 1000 RPM.
wowowowowowowow crazy good stuff!