Replies continued
TreyzLong Island, NY · May 30, 2009#51Decided to attend a Dyno/BBQ day at Perfromance Motorsports today.
They dynoed a Nissan Cube (stock from the dealership directly being they are apart of Smitown Nissan) so I wanted to see if I could beat it ...
Only power mod is the AFE intake and ground wiring kit ... also with the ol' a/t slush box ...
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
Picture not included in this copy
cali yarisCanoga Park, CA · May 30, 2009#52^ nice man, bet that was fun.
I have also tuned with 18 psi of boost and the results are 206 hp and 239.6 Nm torque
18 psi yielded 206 hp? That seems very very low for that much boost. Is it a typo?
TreyzLong Island, NY · May 30, 2009#53lol you confused me a bit Garm.
changchewsoonMalaysia · May 31, 2009#54193 ps and 275 nm at the wheels @ 16 psi
detailed information of the mod can be found
here1 attachment not included in this copy
TreyzLong Island, NY · May 31, 2009#55How are you guys managing the boost out there? We need those Ancient Asian secrets here in the US!!!
kngrsllSpartanburg, SC · May 31, 2009#56 Originally Posted by
LtNoogie ↑ Manual or AT?
manual
Originally Posted by
Treyz ↑ No way that there is a 20% on that last sheet for a stock Yaris. For crank yes but not wheel so it is correct in terms of wheel hp being at 88whp.
yeah, thats what i meant. he said its about a 20% correction to the crank.
changchewsoonMalaysia · Jun 1, 2009#57errrr, tell me what you guys need to know? i'll try my best to share as much information as possible.
GiupoItaly · Jun 1, 2009#58The Greddy turbo is very small..
m911gtChicago · Jun 1, 2009#59The scan didn't come out as clear as I wanted it to but here are two of my runs at my university's Mustang dyno. The second run yielded 103 whp and 103 ft-lbs of torque. Relevant mods include the lightweight pulleys from NST, an AFE Stage 2 intake, a Thunder Sport header, and a Tanabe Medallion Touring exhaust. All pulls were done in fourth gear and my car has a manual transmission.
1 attachment not included in this copy
mikenacaratoBrentwood, TN · Jun 7, 2009#60here is mine from this weekend, pulleys, intake, corolla tb
royal purple oil and 89 octane were used.
Picture not included in this copy
Almost forgot about this thread. Here is mine again incase it was lost somewhere before. Second run the bay was hot didnt let it cool down any.
Mods:
AFE Intake
NST Crank Pulley
DC Header
TRD Axle back Exhaust
Picture not included in this copy To tell the truth i dont even feel a diff lol. Gonna get it dynoed again since i just did the TB upgrade. People say they feel the power i says🤷 my butt dyno dont feel nothing👎 No cel no oscillation just a low idle of 500 rpm when warmed up good.
Ok TB dyno posted
2 attachments not included in this copy
2bad4uKingston, Jamaica W.I. · Jun 11, 2009#62The dyno result for 06 Vitz RS 5spd. only mod are a BroSpeed Bosal axle-back muffler and grounding kit (home made).
Max Power = 101.13 Max Torque 93.44
temp outside was 78F using 91 octane.
1 attachment not included in this copy
cleongSingapore · Jun 11, 2009#63Was your 06 Vitz RS a manual, or a CVT?
mikenacaratoBrentwood, TN · Jun 11, 2009#64it says 5 spd
2bad4uKingston, Jamaica W.I. · Jun 11, 2009#65yes 5 spd
2bad4uKingston, Jamaica W.I. · Jun 11, 2009#66I wanted to do the dyno now for on Sunday I will start more mods all coming in from S. Florida my wife went up for a few days. I got must from Garm and a few more from sellers on YW. Hope for about 10 - 15whp more. then in a month or two a s/c or turbo but leaning more to a Blitz s/c
Originally Posted by
2bad4u ↑ I wanted to do the dyno now for on Sunday I will start more mods all coming in from S. Florida my wife went up for a few days. I got must from Garm and a few more from sellers on YW. Hope for about 10 - 15whp more. then in a month or two a s/c or turbo but leaning more to a Blitz s/c
yo my yute yuh Jamaican?
2bad4uKingston, Jamaica W.I. · Jun 12, 2009#68irie man
ROCKLAND TOYOTAROCKLAND COUNTY NY · Jun 12, 2009#69WHOO HOO
Originally Posted by
2bad4u ↑ irie man
lol yes boss😎
changchewsoonMalaysia · Jun 16, 2009#71another 1nz-fe turbo hot from the oven, using e-manage blue as the piggyback.
1 attachment not included in this copy
changchewsoonMalaysia · Jun 17, 2009#72base timing not altered however
1 attachment not included in this copy
cleongSingapore · Jun 17, 2009#73 Originally Posted by
2bad4u ↑ The dyno result for 06 Vitz RS 5spd. only mod are a BroSpeed Bosal axle-back muffler and grounding kit (home made).
Max Power = 101.13 Max Torque 93.44
temp outside was 78F using 91 octane.
The dyno chart seems to suggest that the JDM Vitz RS has the same output as a regular 1.5 litre Yaris, reinforcing what the factory dyno charts show.
I think the Vitz RS TRD would be a bit more in hp and tq though.
changchewsoonMalaysia · Jul 22, 2009#74no change in boost, plug and play coils.
1 attachment not included in this copy
thebarberGrand Rapids, MI · Jul 22, 2009#75custom intake, 1zzfe throttle body, megan fart can, NST underdrive crank pulley
**a stock yaris on this dyno pulled 91.3whp**
Picture not included in this copy
YarisPRMayaWest, Puerto Rico · Sep 28, 2009#76I've just downloaded the "Dynolicious" in my GF's Iphone, so we where having some fun with it. I know it's not accurate but its kinda fun 😁. Never got to find a decent road 🙁. And my GF doesn't help... Me: "should I launch now?" GF: "you should have launched few seconds ago" 🤣
1st Run
2007 Toyota Yaris
Sep 27, 2009 11:44 PM
Acceleration
0-10 MPH: 1.00 sec
0-20 MPH: 2.39 sec
0-30 MPH: 3.73 sec
0-40 MPH: 5.77 sec
0-50 MPH: 7.95 sec
0-60 MPH: 10.39 sec
0-70 MPH: 14.25 sec
Elapsed Time
60': 2.94 sec @ 22.6 MPH
330': 7.75 sec @ 47.8 MPH
1/8 mi: 11.68 sec @ 62.5 MPH
1000': 15.08 sec @ 72.6 MPH
1/4 mi: 17.96 sec @ 78.2 MPH
Miscellaneous
Max Speed: 79.3 MPH
Max Acceleration: 0.47 G's
Peak Horsepower: 105 HP
2nd Run
Sep 27, 2009 11:48 PM
Acceleration
0-10 MPH: 3.30 sec
0-20 MPH: 4.40 sec
0-30 MPH: 6.02 sec
0-40 MPH: 8.04 sec
0-50 MPH: 10.24 sec
0-60 MPH: 13.45 sec
0-70 MPH: 17.05 sec
Elapsed Time
60': 5.25 sec @ 25.1 MPH
330': 10.04 sec @ 47.8 MPH
1/8 mi: 14.06 sec @ 61.6 MPH
1000': 17.52 sec @ 71.3 MPH
1/4 mi: 20.42 sec @ 78.2 MPH
Miscellaneous
Max Speed: 78.4 MPH
Max Acceleration: 0.49 G's
Peak Horsepower: 107 HP
ozmddDFW, TX · Oct 10, 2009#77OK, got some hard data for y'all. Frownonfun and I both did a dyno day this morning, and the conditions were nice. We did this on a Mustang AWD dyno, so the tech told us we're probably a few percent higher than this dyno shows, but close enough.
I'll post the scans of the sheets later.
OZMDD - 107 WHP / 106 TQ, AFR -12.6. Also, 76 deg F air temp (at the intake, according to the SGII) [TRD CAI w/ bypass fitting removed and replaced with coupler, Thunder axle-back exhaust, NST 10% UD Lyte pulley.]
FROWNONFUN had 145 WHP from the S/C setup we installed a few weeks ago, and that's with stock tuning (piggyback) and no other mods besides axle-back and NST Alt pulley!! I believe that's around 6 lbs boost. 🙌
cali yarisCanoga Park, CA · Oct 10, 2009#78nice! 👏 looking forward to the graphs
lilredrocketDFW, Texas · Oct 10, 2009#79ozmdd that alt pulley cam with the s/c so you can run the belt for the s/c. I believe frownonfun's afr was around 11.3 and the guys running the dyno did the math and said the HP number should be around 147-150hp and no CEL's
thebarberGrand Rapids, MI · Oct 10, 2009#80145whp is impressive on the rotrex
i still want dyno charts though!
PETERPOOPOahu · Oct 10, 2009#81niceeeeee! i'm jealous
i knew it had more power than the blitz when i saw the video of it taking off with a passenger inside. can't you put an intercooler on that kit too and get an advertised 150whp with it. Since he's getting 145whp as of now, that intercooler could maybe take him to 155 + whp. I believe the kit only advertised that it puts down 140whp; so you already have a good thing going!
Now get a headerback exhaust setup. ;)
lilredrocketDFW, Texas · Oct 10, 2009#82He has a custom axle back. but thats it for exhaust when I was talking with him today and tole him he needs to get a header and showed him where he could cut for to put in an intercooler. Also this kit can be used with the intake mani that Garm is developing. I also told him that after he gets an intercooler he could talk to Mike at NST and have him make a smaller pulley to get some more boost out of the kit. The guy also just bought some 2zz injectors just to be on the safe side.
lilredrocketDFW, Texas · Oct 10, 2009#83Hey Peter one of the first times I went to Mike's shop I was talking with him about the Blitz kit and if he could make a pulley for the kit and he said he had a few options and after looking around some he ruled out one of them.
1.) make an overdrive pulley for the crank (ruled out pulley would be to close to another)
2.) make a fixed pulley for the blitz and probably through a cel and take away the option of turning the s/c off and on.
3.) make a clutched pulley and and still be able to run the s/c like normal. I think he said he could do this for about $500 or so price but worth it if you want to use you the on/off function
PETERPOOPOahu · Oct 11, 2009#84 Originally Posted by
lilredrocket ↑ Hey Peter one of the first times I went to Mike's shop I was talking with him about the Blitz kit and if he could make a pulley for the kit and he said he had a few options and after looking around some he ruled out one of them.
1.) make an overdrive pulley for the crank (ruled out pulley would be to close to another)
2.) make a fixed pulley for the blitz and probably through a cel and take away the option of turning the s/c off and on.
3.) make a clutched pulley and and still be able to run the s/c like normal. I think he said he could do this for about $500 or so price but worth it if you want to use you the on/off function
Hey i've explored all these options. I messaged NST about making an overdrive crank pulley with a smaller water pump pulley (that is the pulley your friend is talking about). NST sounded grateful for the information, but I doubt they will develop anything. 👎
2. Garm is looking into making a smaller fixed pulley without the option of turning on/off
3. Yah, this is the most expensive option, however might be worth it. PM me more about that..
lilredrocketDFW, Texas · Oct 11, 2009#85Just ask Mike at NST. He also makes one off pulleys that why they are so much too. The reason they won't develpoe it is because there is not a big enough market for it you know?
frownonfunRGV, Texas · Oct 11, 2009#86 Originally Posted by
PETERPOOP ↑ niceeeeee! i'm jealous
i knew it had more power than the blitz when i saw the video of it taking off with a passenger inside. can't you put an intercooler on that kit too and get an advertised 150whp with it. Since he's getting 145whp as of now, that intercooler could maybe take him to 155 + whp. I believe the kit only advertised that it puts down 140whp; so you already have a good thing going!
Originally Posted by
ozmdd ↑ FROWNONFUN had 145 WHP from the S/C setup we installed a few weeks ago, and that's with stock tuning (piggyback) and no other mods besides axle-back and NST Alt pulley!! I believe that's around 6 lbs boost. 🙌
to be fair i also have a kyle busch license plate frame for my back plate. could account for the extra hp.
also i'll put an intercooler in when garm finishes that hood from the contest. and if garm still has a few dc sports headers in stock on friday i'll be picking one of those up too.
PETERPOOPOahu · Oct 11, 2009#87 Originally Posted by
lilredrocket ↑ Just ask Mike at NST. He also makes one off pulleys that why they are so much too. The reason they won't develpoe it is because there is not a big enough market for it you know?
.....
I am aware of this and I ALREADY have spoken to him. The overdrive crank pulley and smaller water pulley would have been custom made for me and I would have paid for the expense to make them. However, he seems to not want the business, so screw it. So why bother him with a clutch pulley when he won't make me the overdrive crank and smaller water pulley. Know what i'm saying?
lilredrocketDFW, Texas · Oct 11, 2009#88I'm sure if you seemed really interested he would make them for you call him and ask no harm in asking again
SabretoothSt Cloud FL · Oct 11, 2009#89Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece.
ozmddDFW, TX · Oct 12, 2009#90 Originally Posted by
PETERPOOP ↑ .....
I am aware of this and I ALREADY have spoken to him. The overdrive crank pulley and smaller water pulley would have been custom made for me and I would have paid for the expense to make them. However, he seems to not want the business, so screw it. So why bother him with a clutch pulley when he won't make me the overdrive crank and smaller water pulley. Know what i'm saying?
Guys... nothing wrong with either of your comments, but maybe start a thread for it? the dyno charts are kinda getting lost among the debate. 🙂
lilredrocketDFW, Texas · Oct 12, 2009#91Speaking of dyno charts where is yours? Also frownonfun needs to post his too!!
ozmddDFW, TX · Oct 12, 2009#92Scanning today. My home scanner wasn't cooperating. :)
lilredrocketDFW, Texas · Oct 12, 2009#93Oh ok...
PETERPOOPOahu · Oct 12, 2009#94 Originally Posted by
lilredrocket ↑ I'm sure if you seemed really interested he would make them for you.
WRONG. lol
Originally Posted by
Sabretooth ↑ Well if everyone on board with the Blitz kits would want one, I asssume the price would come down if he was able to make 5-10 pulleys and sell them over time instead of 1 piece.
Yes. Mike and I are both aware of this. I would fork out the dough to pay for the custom made pulleys and let him know if everything worked out. I would dyno my car and show the results and would provide the info on how much more lbs of boost I am getting. If everything was good, he would probably make a TWO-pulley supercharger set (overdrive crankpulley/smaller waterpump pulley) and sell them as that. He could make some decent money off of that and I am sure a lot of blitz owners would purchase it. However, he does not seem interested in making me the overdrive crank pulley/smaller water pump pulley anymore (like i've already stated in this thread) and the project is in the can.
lilredrocketDFW, Texas · Oct 12, 2009#95Why are you stuck on an overdrive crank pulley? Why not an underdrive s/c pulley? Did he say he was not interested? He told me that he would need someone witht the s/c there to do some testing and such. Why dont you start up a GI thread for it to show Mike how many people are interested in it? He is a busy guy why not try and help him out?
PETERPOOPOahu · Oct 12, 2009#96So I can keep my on/off function? He said he was interested and would do it for me. He did not say anything about needing someone with a blitz kit there to be able to make the pulley. Him making me the pulleys DID NOT require a GI thread, since I would be paying whatever cost was needed to make MY pulleys (for the 1000x). lmao.
You just don't stop, do you?
/end
*Mods: clean up this thread. thanks
lilredrocketDFW, Texas · Oct 12, 2009#97It's really funny how you want this and don't do any follow up on it.
PETERPOOPOahu · Oct 12, 2009#98It's really funny how you have no idea what you're talking about.
ozmddDFW, TX · Oct 12, 2009#99OK, here it is:
I know the numbers are pretty faint, but the scale on the left is HP and Torque, with an increment of 15, starting at 50, up to 200.
Edit: Actually, totally unreadable once posted. I'll have to do a greyscale scan and repost.
Still, it says: Max Torque (ft-lbs) 106 (@4000rpm)
Max HP - 107 (@5900rpm)
Max AFR - 12.6 (@3300rpm)
HP and TQ cross-over at 5200rpm, right around 105 each.
The torque curve is the middle one (blue), and is remarkably flat. :)
1 attachment not included in this copy
lilredrocketDFW, Texas · Oct 12, 2009#100Glad you got it up!!