hold crap ITBs would be so awesome!
Official Richard Holdener who wants to buy an intake manifold list
386 posts · 103,977 views · page 5 of 8
Replies continued
Thanks for the info. I will have one of these!!! ...and hopefully a turbo. 😁Originally Posted by cali yaris ↑I'll talk to him again -- I'm working on having the production run include some extras for me to carry in my store. stay tuned... (so to speak)
I really hope he gets a small supply of these so I can save up for one.
I probably shot myself in the foot for offering the mid-range manifold, but the comparison does deserve a little insight. Actually, it is possible to significantly increase the torque production at lower engine speeds using the proper intake design. The problem associated with this is that there is almost always a trade off in power at higher engine speeds. The intake is literally tuned to maximize torque production at a given engine speed. It may be possible to give big gains at 3000 rpm but it may also cost power at 5000-6000 rpm(menaing it may make less power than the stock intake). I doubt this is acceptable. I will run a few more tests on the mid-range version and see if there is a happy medium that is better than my previous results. Also I saw posts on difference between Hp & Tq, but in reality to the are mathematically related and any given torque value will have a corresponding HP value at a given engine speed. Tq is simply work or force and HP is that work or force applied over time. In a drag race scenario (or simple acceleration) the intake that will provide the best acceleration time is the one that offers the most average power over the rpm spread required. In the case of the Yaris, this means WOT at 4000 rpm to 6000+ rpm-except in 1st gear.
Originally Posted by eTiMaGo ↑Well, if I may share my 2 cents, I've had a lot of time to think about this conundrum...
As much as we want, we cannot expect any sensible improvement of low to mid-range torque with just bolt-on NA mods. You must realize that a 1.5L engine can only do so much. Sure, you could get higher compression pistons, a stroker kit and maybe some new cams, but AFAIK those also really come into their own at high RPMs.
The reason is, sadly, there is no replacement for displacement. You cannot expect the torque of a bigger engine, it's just not gonna happen. You won't see Pee-Wee Herman bench pressing 300lb, you won't see a 1NZ with V8 torque... 😁
So, one must realize this intake manifold is not some magical end-all solution to more power. If the best results are a pretty sizeable increase of torque from 2500RPM onward, then I think it is correct for the manufacturer to maximize on this.
This means that yes, on the street, if you drive in a calm and "normal" manner, you'd never really see an advantage. This intake manifold will really come into its own where it is designed to, at high RPMs, so it will be of most use to those who really race their cars, be it on a track or autocross.
It was said in a previous post, or one that was lost with the hack, but this manifold could be compared to a "bolt-on VTEC", as it gives the engine the ability to keep revving far better than stock. And, as with VTEC, the love-hate relationship is that you have to keep the engine at high RPMs to get good power output from it.
If you really want more low-end torque, the most effective solution is more displacement. This is where forced induction comes in, as it can be considered "virtual displacement" 😁 (think about this... normal atmospheric pressure is what, 14psi? a turbo running at 7psi is thus forcing in 50% more of atmospheric pressure, thus giving your engine characteristics of one that is 50% larger, or 2.2L. Of course, this is a very rough generalization, kinda like giving steroids to Pee-Wee!). This is why superchargers excel in this area, they start shoving in more air as soon as the engine is moving, same thing with small, responsive turbos that may not create massive boost, but can start to supply it quite early.
There you have it... If you seriously want more low end torque, go for a small turbo or supercharger. Of course, it's $3000 vs $700, I think that's also an important reason why many are wishing for a "low RPM" version of the intake.
I'm in no way an engine expert, so feel free to pick apart what I've just written 😁
welcome back
hehe, yeah!
well if the mid range manifold turns out to not be as great, i would love to get a high range manifold, the problem is i came onto this forum late and was unaware of this buy in and dont have the money immediately to do it. will you be offering this manifold one time only or will you produce more as the demand presses on?
HIGH RANGE MANIFOLD FTW! Can't wait!!!! RAAAHH!!
Can someone repost the dyno's for the two intakes? I know there was a post on it pre-hack. Would be nice to have some reference again.
If you'd rather, Richard, I'll pull my list and drop the topic for now. I don't want to turn this into a huge headache for you. If it's getting there, like I said a few times in the mid-range thread I'm okay with the mid-range not happening.
Originally Posted by sdyaris ↑Can someone repost the dyno's for the two intakes? I know there was a post on it pre-hack. Would be nice to have some reference again.
Since Richard's going to make newer tests, I think posting the old mid-range graph would just confuse matters.Originally Posted by richardholdener ↑I will run a few more tests on the mid-range version and see if there is a happy medium that is better than my previous results.
Now that SEMA nonsense is over, I can get the Yaris and start making the production piece. I will keep you guys posted on the progress. I am starting with the high-horsepower version first and only if demand warrants, possibly follow up with mid-range.
Originally Posted by WolfWings ↑Since Richard's going to make newer tests, I think posting the old mid-range graph would just confuse matters.
can't wait can't wait
can't wait +10 hp ftw
can't wait for the graphs to be posted 😁
i already sold $700 worth of $5.00 pizza mias. cant wait!!
Ummm.. I am a real "banause" when it comes to engine and mechanical components. I've been away for a long time (absent from yarisworld) but now that I have returned and rekindled myself with these posts... I gotta say wow. For 700 bucks I was thinking man, I need to get in on this. So if it is possible to add another person to the list... please do so if the following conditions aren't going to become obstacles:
1. I live in Australia, the engines are the same and I hope that the engine bays are the same.
2. Shipping costs: With such an order I was wondering whether it would be possible to ship the manifold to Australia. I'm guessing that shipment would cost somewhere around 300-500 US dollars? Not really sure I have never tackled such an order before.
3. Banause: Yes I am the village idiot when it comes to installing stuff on my Yaris. I am like a movie producer, I find stuff and combine them to make the ultimate block buster movie: I didn't act or direct or do anything fancy to lightning and sound effects, but I reap the benefits! (Ok a little too dramatic, but you get the gist.. please?). I know you supply a step by step manual (with pictures!), and I won't be the one doing the install, but granted that the workshop I want to install the manifold for me aren't total idiots I should be able to drive around with more POWARRRRR under my hood yes? (yes!)
So please, If you have time to review my comment then let me know if it is still alright to be added to the list if the aforementioned criteria are met. Thanks Richard!
1. I live in Australia, the engines are the same and I hope that the engine bays are the same.
2. Shipping costs: With such an order I was wondering whether it would be possible to ship the manifold to Australia. I'm guessing that shipment would cost somewhere around 300-500 US dollars? Not really sure I have never tackled such an order before.
3. Banause: Yes I am the village idiot when it comes to installing stuff on my Yaris. I am like a movie producer, I find stuff and combine them to make the ultimate block buster movie: I didn't act or direct or do anything fancy to lightning and sound effects, but I reap the benefits! (Ok a little too dramatic, but you get the gist.. please?). I know you supply a step by step manual (with pictures!), and I won't be the one doing the install, but granted that the workshop I want to install the manifold for me aren't total idiots I should be able to drive around with more POWARRRRR under my hood yes? (yes!)
So please, If you have time to review my comment then let me know if it is still alright to be added to the list if the aforementioned criteria are met. Thanks Richard!
Yo you have a whole list of people we getting pics anytime soon?
You should contact CALIYARIS (Garm) he probably can help you work out the shipment. I think he has shipped stuff to Australia before.Originally Posted by Ranggarn ↑Ummm.. I am a real "banause" when it comes to engine and mechanical components. I've been away for a long time (absent from yarisworld) but now that I have returned and rekindled myself with these posts... I gotta say wow. For 700 bucks I was thinking man, I need to get in on this. So if it is possible to add another person to the list... please do so if the following conditions aren't going to become obstacles:
1. I live in Australia, the engines are the same and I hope that the engine bays are the same.
2. Shipping costs: With such an order I was wondering whether it would be possible to ship the manifold to Australia. I'm guessing that shipment would cost somewhere around 300-500 US dollars? Not really sure I have never tackled such an order before.
3. Banause: Yes I am the village idiot when it comes to installing stuff on my Yaris. I am like a movie producer, I find stuff and combine them to make the ultimate block buster movie: I didn't act or direct or do anything fancy to lightning and sound effects, but I reap the benefits! (Ok a little too dramatic, but you get the gist.. please?). I know you supply a step by step manual (with pictures!), and I won't be the one doing the install, but granted that the workshop I want to install the manifold for me aren't total idiots I should be able to drive around with more POWARRRRR under my hood yes? (yes!)
So please, If you have time to review my comment then let me know if it is still alright to be added to the list if the aforementioned criteria are met. Thanks Richard!
The first production run of intakes willbemore than the number of people on the list, so please add your name. Installation is easy and comes with instaructions so that should not be a problem. Not sure on shipping and import tax to AUS.
Originally Posted by Ranggarn ↑Ummm.. I am a real "banause" when it comes to engine and mechanical components. I've been away for a long time (absent from yarisworld) but now that I have returned and rekindled myself with these posts... I gotta say wow. For 700 bucks I was thinking man, I need to get in on this. So if it is possible to add another person to the list... please do so if the following conditions aren't going to become obstacles:
1. I live in Australia, the engines are the same and I hope that the engine bays are the same.
2. Shipping costs: With such an order I was wondering whether it would be possible to ship the manifold to Australia. I'm guessing that shipment would cost somewhere around 300-500 US dollars? Not really sure I have never tackled such an order before.
3. Banause: Yes I am the village idiot when it comes to installing stuff on my Yaris. I am like a movie producer, I find stuff and combine them to make the ultimate block buster movie: I didn't act or direct or do anything fancy to lightning and sound effects, but I reap the benefits! (Ok a little too dramatic, but you get the gist.. please?). I know you supply a step by step manual (with pictures!), and I won't be the one doing the install, but granted that the workshop I want to install the manifold for me aren't total idiots I should be able to drive around with more POWARRRRR under my hood yes? (yes!)
So please, If you have time to review my comment then let me know if it is still alright to be added to the list if the aforementioned criteria are met. Thanks Richard!
$700.00 for 10 extra hp.. intake and exhaust may bring it up to 120 hp which may beat the new FIT power band!....interesting..
yea that new fit comes with 117hp i believe. :(
if all the #'s are right. we should looking at 125whp with intake, header, full 2'' exhaust,pulleys and this manifold
Please don't speculate about power numbers using the intake-that is why I provided the power graph. No one has produced anwhere near 125 wheel hp in NA form. I posted a graph previously where we made 120 wheel hp using a version of the intake, CAI, no exhaust (just a down pipe) and the stock ex man. It may be possible to get to 125 wheel hp, but it will likely take a long-tube header (which does not exist as of yet) and underdrive pulleys (assuming they are worth power). Your typical CAI, axle back and this intake will be closer to 115 wheel hp.
Originally Posted by kou ↑if all the #'s are right. we should looking at 125whp with intake, header, full 2'' exhaust,pulleys and this manifold
less rotational mass, so they must have some gain? If that is considered rotational mass? Pulleys that is!
I can handle the shipping to Australia. 10 pounds shipped USPS Priority International is about $60. (I'm guessing it would be about 10 pounds packed).
sorry Richard,maybe i am just getting to excited. instead of an axle back how much hp can be gained from full 2'' header back exhaust.Originally Posted by richardholdener ↑Please don't speculate about power numbers using the intake-that is why I provided the power graph. No one has produced anwhere near 125 wheel hp in NA form. I posted a graph previously where we made 120 wheel hp using a version of the intake, CAI, no exhaust (just a down pipe) and the stock ex man. It may be possible to get to 125 wheel hp, but it will likely take a long-tube header (which does not exist as of yet) and underdrive pulleys (assuming they are worth power). Your typical CAI, axle back and this intake will be closer to 115 wheel hp.
The real gains from underdrive pulleys comes not from the change in weight but from a reduction in the speed of the accessories. This assumes the pulleys have changed dimension (smaller on crank or larger on accessory). From my testing on other applications, a lighter weight pulley will offer little if any power gain-you need to slow down the speed of the water pump, ps pump, alt etc.. to realize significant gains.
Originally Posted by Nexus1155 ↑less rotational mass, so they must have some gain? If that is considered rotational mass? Pulleys that is!
The 120 wheel hp run was made with no exhaust after the custom downpipe, so that is about as free flowing as you can get.
Originally Posted by kou ↑sorry Richard,maybe i am just getting to excited. instead of an axle back how much hp can be gained from full 2'' header back exhaust.
Ok if someone could please add me to the list then = )
Yah if there is any confusion, the intake manifold he did on the 120whp run isn't the version we will be getting.
He emailed me this awhile ago when I asked him if i could reach 120whp with underdrive pulley, lightweight alt pulley, lightweight waterpump pulley, AEM intake, axleback...
"The 120 hp run was made to see if we could reach that power level. The mods included light weight oil, a custom version of the intake tuned speficially for that purpose and a custom downpipe withno cat and no cat-back exhaust. We also tuned the length of the CAI/MAF assembly so it is doubtful that you will reach the 120 wheel hp level with the mods you described."
He emailed me this awhile ago when I asked him if i could reach 120whp with underdrive pulley, lightweight alt pulley, lightweight waterpump pulley, AEM intake, axleback...
"The 120 hp run was made to see if we could reach that power level. The mods included light weight oil, a custom version of the intake tuned speficially for that purpose and a custom downpipe withno cat and no cat-back exhaust. We also tuned the length of the CAI/MAF assembly so it is doubtful that you will reach the 120 wheel hp level with the mods you described."
I don't think it's to the wheels.Originally Posted by Yoda ↑yea that new fit comes with 117hp i believe. :(
Did anyone add this gentleman to the list? Test Yaris is being delivered tonight so we can start on production intake tomorrow. Will keep you posted and suply photos as soon as it is ready.
Originally Posted by Ranggarn ↑Ok if someone could please add me to the list then = )
"Kou" has to do it since he's thread maker. Unless a mod will do it until Kou signs on and realizes this..
Can't wait! Can't wait! Can't wait!
Can't wait! Can't wait! Can't wait!
he has been added.
hope they started production today.can't wait.
the new fit is 117 engine hp. It was 109 before right? so +8 at the engine maybe +7 at the wheels. I wouldn't be too worried. I'm pretty sure the older models make a tad less or jsut the same as our yaris at the wheels so this new model should only be 6 or so whp more than ours is now.
i'm not worried at all. and the fits weigh more..
if only i had the money i would be sooooo happy lol
I made an intake for the Honda Fit as well,but so far the gains have not been as good as with the yaris. I need to be able to control the variable cam timing ont he Fit to optimize the intake (I think).
Nah, you're over the fit. Stick to the yaris! ;) Turbo kit coming up?
OMFG ! Everyday I think about how freaking sweetass this manifold is gonna be on the yaris , the top end power+ the amazing sound of a sheet metal intake manifold = KILLER ! So when should the final product be ready to sell/ship out ??? Please dont rush . I'd just like a "ball-park" time frame. Thanks again and look foward to installing this manifold .
he said ship out at the end of november
Richard, I'll give you a MILLION dollars to drop the Fit project... 🙄
+1 Got to make Group BuyOUT the end that project!Originally Posted by cali yaris ↑Richard, I'll give you a MILLION dollars to drop the Fit project... 🙄
the fits are just a tad bit faster than our yaris. I drove one the other day and man i love the gearing on it.
our yaris? or your yaris. ;)
he fits are just a tad bit faster than our yaris.Not at the track. I beat those guys with minimal mods on my car.
1/4 mile track?
I don't think a million dollars will cover it-do you know how big the Honda Fit market is? Actually, the best intake has been for the Miata-that one offer the best power gains of any motor yet.
Originally Posted by cali yaris ↑Richard, I'll give you a MILLION dollars to drop the Fit project... 🙄
so is the midrange manifold going to be dropped?