Yarisworld Archive

Official Richard Holdener who wants to buy an intake manifold list

386 posts · 103,977 views · page 6 of 8

Replies continued

PETERPOOPOahu · Nov 12, 2008#251
He's already said that he will produce the high end and then after that is the demand for the midrange is great, he will start that too i believe.
CASTREXCosta Rica · Nov 12, 2008#252
One Man can only work in so many things at the same time.. 😁

And he is also working on the 1.8L Intake👍

So make a line!! 🤣
YodaFL · Nov 12, 2008#253
Originally Posted by cali yaris ↑
Not at the track. I beat those guys with minimal mods on my car.
Stock for stock the fits faster from what i have seen. but just by about 1/4 of a car.
PETERPOOPOahu · Nov 12, 2008#254
From what you've seen....
kouThread starternj · Nov 12, 2008#255
even Road and Track say the yaris is faster.the yaris is around 200lbs lighter than the fit(so we can call it, the not so Fit.)
PETERPOOPOahu · Nov 12, 2008#256
My friend has a 06 fit with axleback,intake, and crank pulley. i'm going to race him soon and i'll show you guys whos faster via video!
GalavoxxSan Francisco · Nov 12, 2008#257
Originally Posted by PETERPOOP ↑
My friend has a 06 fit with axleback,intake, and crank pulley. i'm going to race him soon and i'll show you guys whos faster via video!
😆
anonymous userwindward oahu · Nov 12, 2008#258
Originally Posted by richardholdener ↑
I don't think a million dollars will cover it-do you know how big the Honda Fit market is? Actually, the best intake has been for the Miata-that one offer the best power gains of any motor yet.
Yeah, as much as i love Richard designing the mani for our cars, I'm surprised he hasn't hit up the other markets. I'm sure the fit and other eco cars have plenty of members willing to drop $$ on this piece.
Just let us know when our piece is finished, so we know who/when to pay.
cali yarisCanoga Park, CA · Nov 12, 2008#259
A million dollars WOULD cover it. 🙄
mikenacaratoBrentwood, TN · Nov 12, 2008#260
richard, you mentioned making extras correct? i dont want to miss my chance on a manifold. im in the gb for the midrange but idk if it will be made or not :(
richardholdenerLas vegas, NV · Nov 12, 2008#261
Extras will be made of the intake but the midrange intake will only be produced if suffficient interest exists (minimum of 10 orders.) I wouldn't wait, just get this intake since it looks like there will be a sell out.

Originally Posted by mikenacarato ↑
richard, you mentioned making extras correct? i dont want to miss my chance on a manifold. im in the gb for the midrange but idk if it will be made or not :(
mikenacaratoBrentwood, TN · Nov 12, 2008#262
ya thats what im getting at. i want to get this one instead of mission out on it, i just want to make sure you will be making some extras because unfortunately i cannot commit at this time because of the short notice (i just joined here not too long ago) but will try my best to come up with the money.
PETERPOOPOahu · Nov 12, 2008#263
he stated that there will be more than 13 made on this first production run so add yourself to the list baby!@

Originally Posted by richardholdener ↑
The first production run of intakes willbemore than the number of people on the list, so please add your name. Installation is easy and comes with instaructions so that should not be a problem.
mikenacaratoBrentwood, TN · Nov 12, 2008#264
im just worried about having the extra 700 by the end of the month... but what the heck..what else will i spend my bonus on?

add me to the high end list please
PETERPOOPOahu · Nov 12, 2008#265
5 more then we get group buy price. correct?
TheRealEnthMiami, FL · Nov 12, 2008#266
o.0 How much would group buy price be?
PETERPOOPOahu · Nov 12, 2008#267
i am pretty sure richard said if we got 20 buyers, we'd get 50$ off.
dallasCanada · Nov 13, 2008#268
I think its great that Richard is designing us an intake, sadly I've been on too many forums like Altimas net seen intakes being made by "" pros" tuning on dyno's and in the end the gains are very limited unless you are boosted or pumping a much larger volume of air. Almost always you loose somewhere in the rpm range. You may dyno an extra 5 hp at 6000 rpm but you can end up with less hp under the curve. I would strongly reccomend you get a a/f meter to make sure your not running dangerously lean after doing a full intake system. I like the fact he is trying to offer two differently tuned intakes. Toyota spent a lot of time designing the manifold to be the best compromise of torque hp and drivability. I look forward to seeing some real world dyno's when people get them, on a plus, the bling factor of a tuned custom intake is priceless.


Originally Posted by anonymous user ↑
Yeah, as much as i love Richard designing the mani for our cars, I'm surprised he hasn't hit up the other markets. I'm sure the fit and other eco cars have plenty of members willing to drop $$ on this piece.
Just let us know when our piece is finished, so we know who/when to pay.
YodaFL · Nov 13, 2008#269
Originally Posted by kou ↑
even Road and Track say the yaris is faster.the yaris is around 200lbs lighter than the fit(so we can call it, the not so Fit.)
I dont listen to what mags say...I find most blow things way out and elaborate to attract readers. This is what happen. Two weeks ago at our local
let out show. 08 Fit and 08 Yaris line up raced to 80mph... FIT WON by 1/4. Changed drivers (Fit driver in Yaris and vise versa) Line up race again...It was closer but the FIT still took the win. I kno the Yaris is lighter but maybe the Fit might be geared better i dont kno (By the way gearing is just as improtant as having Hp, suspension and all that other stuff. Its not all about the engine) ... But watever it is the Fit won. Driver race maybe. I am tellin you wat i seen and not on some paper cause that does not always equal real world results.
PETERPOOPOahu · Nov 13, 2008#270
driver.
mikenacaratoBrentwood, TN · Nov 13, 2008#271
looks like i will have the money for it! so we pay when they are finished which is at the end of this month?
cali yarisCanoga Park, CA · Nov 13, 2008#272
correct
richardholdenerLas vegas, NV · Nov 13, 2008#273
All of your tesing is run with a wide-band oxygen sensor (data logged by the dyno) and we even run an Innovate on the street during development so the end user does not have to. The stock MAF on the Yaris has been very cooperative with the intake and there is little or no change to the air/fuel curve despite the significant change in power. Mass air meter systems are great that way. Regarding other applications, I have developed an intake for the Miata and Fit (still working on this one) and will look at other applications once we get things rollling with the Yaris and Scion applications. I have also run tests on an intake for the 08 Xb (same as TC) with good results so far. Needs more testing (difficult due to rear position of intake), but I think there is sufficient power to be had from this application. I just want to get yaris intake done before going on. As to power under the curve, the real trick to any intake design is to not have the trade off in power-big gains on top for losses down low or in mid range. Some times this is not possible, but with understanding (a lot of math) and long hours on the dyno, it can sometime be accomplished (like the Yaris design). That is why I alsways try to get the inatke to make power before I try to make it fit the chassis. If it doesn't make power, no sense in making it fit and trying to convince ther market that it is the hot ticket. I won't sell an intake if it doesn't perform.

Originally Posted by dallas ↑
I think its great that Richard is designing us an intake, sadly I've been on too many forums like Altimas net seen intakes being made by "" pros" tuning on dyno's and in the end the gains are very limited unless you are boosted or pumping a much larger volume of air. Almost always you loose somewhere in the rpm range. You may dyno an extra 5 hp at 6000 rpm but you can end up with less hp under the curve. I would strongly reccomend you get a a/f meter to make sure your not running dangerously lean after doing a full intake system. I like the fact he is trying to offer two differently tuned intakes. Toyota spent a lot of time designing the manifold to be the best compromise of torque hp and drivability. I look forward to seeing some real world dyno's when people get them, on a plus, the bling factor of a tuned custom intake is priceless.
dallasCanada · Nov 13, 2008#274
Thanks for the ecouraging info! and again for building an intake for such an unlikely candidate!
WolfWingsKansas City, MO, USA · Nov 13, 2008#275
Amen, what Dallas said! I know the Yaris is hardly the 'tuner' car like the Miata or even the various generations of Civic, but thanks for putting in all these long hours towards this intake for our little beasties. And you nailed it on the head, it's NOT easy to get good top-end gains without losing power somewhere else, that you gained as much as you did is great. :-)
cali yarisCanoga Park, CA · Nov 16, 2008#276
did the test car get used yet? What's the current status on the process?
mikenacaratoBrentwood, TN · Nov 16, 2008#277
progress? im too excited!
SabretoothSt Cloud FL · Nov 17, 2008#278
I really hope to have the money by then.

Only reason why it sucks, cause the holidays are so close by... makes some of us torn between family and car parts...lol
pinoypizzaboylas vegas/ henderson · Nov 17, 2008#279
Patiently waiting :)
kouThread starternj · Nov 17, 2008#280
any word on production.
Thej3sta2Orlando, FL · Nov 17, 2008#281
Originally Posted by Sabretooth ↑
I really hope to have the money by then.

Only reason why it sucks, cause the holidays are so close by... makes some of us torn between family and car parts...lol
+2
KCALB SIRAYVirginia · Nov 17, 2008#282
^ family first, but Holidays are not always about gifts...family IS a gift. But I can feel the pain though, timing is bad I guess
cali yarisCanoga Park, CA · Nov 17, 2008#283
makes some of us torn between family and car parts...
No, it doesn't.

LOL
id3379Nov 17, 2008#284
So there's no pics of this at all ?....

at3GGVA Beach · Nov 17, 2008#285
I cannot wait to see some pictures and the results of this Manifold
kouThread starternj · Nov 19, 2008#286
any word on a release date?i,m ready to its 40 degrees out and my short ram is cold to the touch and its lonely it needs someone to play with.

1 attachment not included in this copy

richardholdenerLas vegas, NV · Nov 19, 2008#287
We are stillconfiguring the production version-we offered to have it made adjustable but it seems interest is directed to standard version. We'll post a photo of production piece and then provide date for shipment of first production run.

Originally Posted by kou ↑
any word on a release date?i,m ready to its 40 degrees out and my short ram is cold to the touch and its lonely it needs someone to play with.
mikenacaratoBrentwood, TN · Nov 19, 2008#288
woo! how much is shipping within the states?
PETERPOOPOahu · Nov 19, 2008#289
hopefully not that much! I'm in hawaii! BLAH
pickledchangWashington State · Nov 19, 2008#290
Originally Posted by richardholdener ↑
We are stillconfiguring the production version-we offered to have it made adjustable but it seems interest is directed to standard version. We'll post a photo of production piece and then provide date for shipment of first production run.

when do you expect to haver a photo of the production piece? 🤤
richardholdenerLas vegas, NV · Nov 19, 2008#291
Actually we had planned to have that done during the development of the long-tube header (last weekend) but we stopped to see if the people on the lost would want the inatke available as an adjustable unit. We will get back to it next week-our fabricator is busy with an LS3 cross ram and Ford Modular CFI system.

Originally Posted by pickledchang ↑
when do you expect to haver a photo of the production piece? 🤤
mikenacaratoBrentwood, TN · Nov 19, 2008#292
will it fit a modular 281? haha
richardholdenerLas vegas, NV · Nov 19, 2008#293
We are doing an IR intake for the 4.6L and 5.4L modular Fords applications. The 4.6L version may bee a cross ram likethe LS2 pictured elsewhere.

Originally Posted by mikenacarato ↑
will it fit a modular 281? haha
mikenacaratoBrentwood, TN · Nov 19, 2008#294
hah 4.6 is what i have...i told myself i wont waste more money on it though....:)
blacksandiegovitzJust chillin' out brah ! · Nov 19, 2008#295
Originally Posted by richardholdener ↑
We are stillconfiguring the production version-we offered to have it made adjustable but it seems interest is directed to standard version. We'll post a photo of production piece and then provide date for shipment of first production run.
Please post pictures of the production piece both installed and un-installed , Im sooo stoked to see the finished manifold !
cali yarisCanoga Park, CA · Nov 23, 2008#296
bump for updates?
pinoypizzaboylas vegas/ henderson · Nov 23, 2008#297
is it ready?😉
baked_limabeansLouisiana · Nov 23, 2008#298
sorry, but i'm going to have to take my name off the list. Things came up and i have to make some sacrifices.

Maybe another time.
PETERPOOPOahu · Nov 23, 2008#299
almosssssssst time for shipping!
JerkrattFair Lawn, NJ · Nov 23, 2008#300
if only i could pay u in payments...... i would be set lol