Yarisworld Archive

Official Richard Holdener who wants to buy an intake manifold list

386 posts · 103,977 views · page 4 of 8

Replies continued

anonymous userwindward oahu · Oct 30, 2008#151
I'd like to be added to this list please.
I'll take tiles 12 and $699 please (Oh, does that gameshow date me too far back?)
PETERPOOPOahu · Oct 30, 2008#152
no you can't be added. i'm the only one allowed with this in hawaii. ;) j/j. Glad you are jumping on this!
richardholdenerLas vegas, NV · Oct 30, 2008#153
Sorry I couldnot respond to any inquiries yesterday. I spent all day driving out to california (from Vegas) to pick up an all-aluminum 427 Ford, check on a 1000-hp 5.4L GT500 mod motor and revise the design of the LS1 cross ram intake we were getting ready for dyno and display at SEMA. Oh-the life of automotive rock star!
eTiMaGoBangkok, Thailand · Oct 30, 2008#154
Richard,

Sounds like a tough job... Wanna trade and stay here in the tropics for a while? 😁
PETERPOOPOahu · Oct 30, 2008#155
Originally Posted by richardholdener ↑
Sorry I couldnot respond to any inquiries yesterday. I spent all day driving out to california (from Vegas) to pick up an all-aluminum 427 Ford, check on a 1000-hp 5.4L GT500 mod motor and revise the design of the LS1 cross ram intake we were getting ready for dyno and display at SEMA. Oh-the life of automotive rock star!
I didn't read anywhere in there that you have started our manifolds! doh. End of november right? 😉
richardholdenerLas vegas, NV · Oct 30, 2008#156
Schedule is to have intakes ready by end of Nov-just trying to get cros ram done and tested for SEMA right now-then we can do yaris intake.

Originally Posted by PETERPOOP ↑
I didn't read anywhere in there that you have started our manifolds! doh. End of november right? 😉
PETERPOOPOahu · Oct 30, 2008#157
Originally Posted by richardholdener ↑
Schedule is to have intakes ready by end of Nov-just trying to get cros ram done and tested for SEMA right now-then we can do yaris intake.
🤘
at3GGVA Beach · Oct 30, 2008#158
I dunno about anyone else but if i was blade i would go lay down. It's not fun being broke as a joke (points to self) when something good comes up. But can't wait to hear results from all you guys on the list.
WolfWingsKansas City, MO, USA · Nov 2, 2008#159
Wish this was the mid-range manifold, I'd be all over it like white on rice. I've no complaints once the rev's get up, I just wish the little 1.5er had a smidge more grunt sooner in the RPM's. Enjoy the high-end zing though, you lot that're buying one. S'just not something I'd get any real use out of, or I'd be joining you all in a heartbeat!
cali yarisCanoga Park, CA · Nov 2, 2008#160
The difference was so small between the two designs, it really couldn't be a factor whether to buy one or not, IMO.
blacksandiegovitzJust chillin' out brah ! · Nov 2, 2008#161
Add me too the list man , I down to buy one !
cali yarisCanoga Park, CA · Nov 2, 2008#162
woo hoo, yeah!!
PETERPOOPOahu · Nov 2, 2008#163
I think he said somewhere that this manifold will show gains after 2500rpms....
blacksandiegovitzJust chillin' out brah ! · Nov 2, 2008#164
Originally Posted by PETERPOOP ↑
I think he said somewhere that this manifold will show gains after 2500rpms....
I was very impressed with the dyno chart for the manifold . Looks pretty smooth at low rpms not a huge gain , but thats to be expected with a big smim , they're pretty much about top end power . On high rpms this thing looks killer, like 20+ hp and tq thats nice . I was pretty set on the blitz Sc kit , but the gains with the manifold are very close at a fraction of the cost, and the fact that you can run this manifold with a set of underdrive pulleys is even better , as you can't run smaller pulleys with the blitz supercharger . Im looking foward to the finished manifold, should be great.
PETERPOOPOahu · Nov 2, 2008#165
underdrive pulley, intake manifold, then turbo. oh yes it will be nice
richardholdenerLas vegas, NV · Nov 2, 2008#166
Not to sound like I'm trying to sell the intake, but I don't understand this line of reasoning. Check out the graphs supplied on the intake manifold post and you will see that this design offered gains at 2500 rpm, 3500 rpm, 4000-6000 rpm. Since it never made any less power than the stock manifold, I don't understand why someone wouldn't be interested in having these gains. If it is a money issue-I fully understand, but since gains came as low as 2500 rpm, that is pretty usable. Even the extra torque at 3500 rpm and 4000 rpm (6-8 lbs ft.) are usable in every day driving.

Originally Posted by WolfWings ↑
Wish this was the mid-range manifold, I'd be all over it like white on rice. I've no complaints once the rev's get up, I just wish the little 1.5er had a smidge more grunt sooner in the RPM's. Enjoy the high-end zing though, you lot that're buying one. S'just not something I'd get any real use out of, or I'd be joining you all in a heartbeat!
tk-421Dagobah · Nov 3, 2008#167
Originally Posted by richardholdener ↑
Not to sound like I'm trying to sell the intake, but I don't understand this line of reasoning. Check out the graphs supplied on the intake manifold post and you will see that this design offered gains at 2500 rpm, 3500 rpm, 4000-6000 rpm. Since it never made any less power than the stock manifold, I don't understand why someone wouldn't be interested in having these gains. If it is a money issue-I fully understand, but since gains came as low as 2500 rpm, that is pretty usable. Even the extra torque at 3500 rpm and 4000 rpm (6-8 lbs ft.) are usable in every day driving.
Picture not included in this copy

I believe WolfWings was referring to the fact that the "midrange manifold" prototype showed higher low- and mid-range gains than the latest model. Judging from the above dyno graph, I'm thinking the gains at 2500RPM and 3500RPM should be barely noticeable under normal driving conditions, and that the really juicy stuff should kick in at 4K+ RPM, which is a territory that a lot of "point A to point B" folks don't usually tread under.

Again, I still consider this a worthwhile purchase, but I think more gains at the low- and mid-range would've been even better for people that spend most of their time in the street (i.e. between red lights, traffic, etc).
cali yarisCanoga Park, CA · Nov 3, 2008#168
the really juicy stuff should kick in at 4K+ RPM, which is a territory that a lot of "point A to point B" folks don't usually tread under.
ah but they should -- the car is made for it!
PETERPOOPOahu · Nov 3, 2008#169
heck yah. It's going to be great redlining this bad boy.
TheRealEnthMiami, FL · Nov 3, 2008#170
Yeah, what are these people talking about -laughs- this car is made for speed.... <3 But yeah this is a case of money. If i had 699 i would have been on the top of that list =(
kouThread starternj · Nov 3, 2008#171
i am pretty sure that graph is a pretty stock yaris,so with other bolt-ons the power delivery will be different.and those jabs of tourqe at 2500,3500rpm. and yeah these little 4 bangers are made to rev.
WolfWingsKansas City, MO, USA · Nov 4, 2008#172
Originally Posted by tk-421 ↑
I believe WolfWings was referring to the fact that the "midrange manifold" prototype showed higher low- and mid-range gains than the latest model. Judging from the above dyno graph, I'm thinking the gains at 2500RPM and 3500RPM should be barely noticeable under normal driving conditions, and that the really juicy stuff should kick in at 4K+ RPM, which is a territory that a lot of "point A to point B" folks don't usually tread under.
Bingo. My car's a DD that sees use at autocross, and my biggest wish is more grunt around the 2500-4000rpm range, since it's either stay in 2nd and go way up and down the RPM scale from 2000-redline as I go through the course, or bash my poor transmission to cinders slamming in and out of 1st gear ten or more times in a single 45-second run as I go in and out of corners. Even with my decent rev-matching, it's rough on the transmission.

Originally Posted by tk-421 ↑
Again, I still consider this a worthwhile purchase, but I think more gains at the low- and mid-range would've been even better for people that spend most of their time in the street (i.e. between red lights, traffic, etc).
Oh, I make no bones about complimenting this intake, it's wonderful looking for those that can hit open track day or for playing around on the highway where you can really unwind the decent legs on this motor. But for my particular performance-improvement goals (avoiding downshifting to 1st gear to deal with sub-25mph corners) it doesn't look like it would help that much compared to what I remember of the mid-range graph that had everything shoved about 500rpm to the left for HP, so torque was a notch higher down across the full low-range. Or was that some other dyno graph unrelated to any of these intakes?
eTiMaGoBangkok, Thailand · Nov 4, 2008#173
Well, if I may share my 2 cents, I've had a lot of time to think about this conundrum...

As much as we want, we cannot expect any sensible improvement of low to mid-range torque with just bolt-on NA mods. You must realize that a 1.5L engine can only do so much. Sure, you could get higher compression pistons, a stroker kit and maybe some new cams, but AFAIK those also really come into their own at high RPMs.

The reason is, sadly, there is no replacement for displacement. You cannot expect the torque of a bigger engine, it's just not gonna happen. You won't see Pee-Wee Herman bench pressing 300lb, you won't see a 1NZ with V8 torque... 😁

So, one must realize this intake manifold is not some magical end-all solution to more power. If the best results are a pretty sizeable increase of torque from 2500RPM onward, then I think it is correct for the manufacturer to maximize on this.

This means that yes, on the street, if you drive in a calm and "normal" manner, you'd never really see an advantage. This intake manifold will really come into its own where it is designed to, at high RPMs, so it will be of most use to those who really race their cars, be it on a track or autocross.
It was said in a previous post, or one that was lost with the hack, but this manifold could be compared to a "bolt-on VTEC", as it gives the engine the ability to keep revving far better than stock. And, as with VTEC, the love-hate relationship is that you have to keep the engine at high RPMs to get good power output from it.

If you really want more low-end torque, the most effective solution is more displacement. This is where forced induction comes in, as it can be considered "virtual displacement" 😁 (think about this... normal atmospheric pressure is what, 14psi? a turbo running at 7psi is thus forcing in 50% more of atmospheric pressure, thus giving your engine characteristics of one that is 50% larger, or 2.2L. Of course, this is a very rough generalization, kinda like giving steroids to Pee-Wee!). This is why superchargers excel in this area, they start shoving in more air as soon as the engine is moving, same thing with small, responsive turbos that may not create massive boost, but can start to supply it quite early.

There you have it... If you seriously want more low end torque, go for a small turbo or supercharger. Of course, it's $3000 vs $700, I think that's also an important reason why many are wishing for a "low RPM" version of the intake.

I'm in no way an engine expert, so feel free to pick apart what I've just written 😁
at3GGVA Beach · Nov 4, 2008#174
No thanks, I'll take your word for it 😉
PETERPOOPOahu · Nov 4, 2008#175
Well I'll start by saying, You just compared our engines to Pee Wee Herman!!! ahaha
YodaFL · Nov 4, 2008#176
you were right on it man. couldnt have said it better
cleongSingapore · Nov 4, 2008#177
I have to say that the pinnacle of NA engineering was when Honda put out their B16 series with 100bhp/litre (Toyota did the same with their 20V 4A-GE). Since then, emissions legislation has conspired to neuter that down to between 100hp to 120hp for the 1600cc class.

Even then, these engines lived for the high RPM, you wouldn't see great torque numbers out of the 4A-GE or the B16; they had to have their tits revved right off to get the horsepower numbers, along with valve timing trickery.

With our 1NZ engines, they're fundamentally economy-biased engines, and its a hard ask to make them put out torque and horsepower numbers like the 20V 4A-GEs, or the B16 lumps. I'd be glad to get 135hp out of my 1NZ. It'd leave my car feeling like it was an ideal balance between its suspension and brake capabilities, and the power that it puts out. Until then I would still be tempted by whatever that comes along that promises a horsepower hike.

I'm still interested in this intake manifold; and now that there is more than 10 people who have declared that they are willing to lay down the $700, I'm waiting to see it come to fruition, and hoping that Richard will continue to manufacture these manifolds if they're all that they are cracked up to be.
richardholdenerLas vegas, NV · Nov 4, 2008#178
If we got enough owners to step up to the mid-range version (I will post power grpahs tonight), the I could do a production run of those as well and you guys could choose. This could only be realistic if we got another list filled for those wanting mid-range version. Let me know what you guys think.

Originally Posted by WolfWings ↑
Bingo. My car's a DD that sees use at autocross, and my biggest wish is more grunt around the 2500-4000rpm range, since it's either stay in 2nd and go way up and down the RPM scale from 2000-redline as I go through the course, or bash my poor transmission to cinders slamming in and out of 1st gear ten or more times in a single 45-second run as I go in and out of corners. Even with my decent rev-matching, it's rough on the transmission.



Oh, I make no bones about complimenting this intake, it's wonderful looking for those that can hit open track day or for playing around on the highway where you can really unwind the decent legs on this motor. But for my particular performance-improvement goals (avoiding downshifting to 1st gear to deal with sub-25mph corners) it doesn't look like it would help that much compared to what I remember of the mid-range graph that had everything shoved about 500rpm to the left for HP, so torque was a notch higher down across the full low-range. Or was that some other dyno graph unrelated to any of these intakes?
PETERPOOPOahu · Nov 4, 2008#179
Here's your guys chance. He called the bluff. Put yourselves on that list.
tk-421Dagobah · Nov 4, 2008#180
Originally Posted by richardholdener ↑
If we got enough owners to step up to the mid-range version (I will post power grpahs tonight), the I could do a production run of those as well and you guys could choose. This could only be realistic if we got another list filled for those wanting mid-range version. Let me know what you guys think.
That would be great! 👍
justjesusOrange County · Nov 4, 2008#181
Originally Posted by tk-421 ↑
That would be great!
Do you still have graphs available for the mid-range mani by any chance?
Im guessing he does :) as he said, "I will post power <graphs> tonight"
YAYY
YodaFL · Nov 4, 2008#182
how long would it take to produce the mid range? it sounds real good
WolfWingsKansas City, MO, USA · Nov 4, 2008#183
I'll pony up $800 for the mid-range version if my memory of the graphs is accurate. It may well be that eTiMaGo is entirely accurate and that the mid-range-optimized intake is a waste of resources. I've layed out my hopes, Richard seems to understand and be willing to offer up the mid-range as a response, so I believe my memory was at least mostly accurate based on Richard's response. But I'm more than happy to put my money where my mouth is. =^.^=
Klink10910 · Nov 4, 2008#184
Thank you Richard for the decision...I feel better about this knowing that my race days are long over and just wanted the added punch for the low to mid range. Either way anything is better but a choice is very nice.
YodaFL · Nov 4, 2008#185
yea i can get alot more use out of the mid range. I drive city and i shift well before 6krpm like 4 tru 4.5k. I hardly ever get it runnig all the way up not racing anyone and i am really still not getting anywhere fast. Would rather feel it without my car screaming down the streets attracting cops. Will pony up for mid.Wanna start the second list? lol
PETERPOOPOahu · Nov 4, 2008#186
He's busy at SEMA. He'll probably respond a little later.
tk-421Dagobah · Nov 5, 2008#188
Originally Posted by justjesus ↑
Im guessing he does :) as he said, "I will post power <graphs> tonight"
YAYY
oops! guess i missed that part
PHXDEMONPhoenix, AZ · Nov 5, 2008#189
Originally Posted by eTiMaGo ↑
Well, if I may share my 2 cents, I've had a lot of time to think about this conundrum...

As much as we want, we cannot expect any sensible improvement of low to mid-range torque with just bolt-on NA mods. You must realize that a 1.5L engine can only do so much. Sure, you could get higher compression pistons, a stroker kit and maybe some new cams, but AFAIK those also really come into their own at high RPMs.

The reason is, sadly, there is no replacement for displacement. You cannot expect the torque of a bigger engine, it's just not gonna happen. You won't see Pee-Wee Herman bench pressing 300lb, you won't see a 1NZ with V8 torque... 😁

So, one must realize this intake manifold is not some magical end-all solution to more power. If the best results are a pretty sizeable increase of torque from 2500RPM onward, then I think it is correct for the manufacturer to maximize on this.

This means that yes, on the street, if you drive in a calm and "normal" manner, you'd never really see an advantage. This intake manifold will really come into its own where it is designed to, at high RPMs, so it will be of most use to those who really race their cars, be it on a track or autocross.
It was said in a previous post, or one that was lost with the hack, but this manifold could be compared to a "bolt-on VTEC", as it gives the engine the ability to keep revving far better than stock. And, as with VTEC, the love-hate relationship is that you have to keep the engine at high RPMs to get good power output from it.

If you really want more low-end torque, the most effective solution is more displacement. This is where forced induction comes in, as it can be considered "virtual displacement" 😁 (think about this... normal atmospheric pressure is what, 14psi? a turbo running at 7psi is thus forcing in 50% more of atmospheric pressure, thus giving your engine characteristics of one that is 50% larger, or 2.2L. Of course, this is a very rough generalization, kinda like giving steroids to Pee-Wee!). This is why superchargers excel in this area, they start shoving in more air as soon as the engine is moving, same thing with small, responsive turbos that may not create massive boost, but can start to supply it quite early.

There you have it... If you seriously want more low end torque, go for a small turbo or supercharger. Of course, it's $3000 vs $700, I think that's also an important reason why many are wishing for a "low RPM" version of the intake.

I'm in no way an engine expert, so feel free to pick apart what I've just written 😁
👏 I agree 100%
CASTREXCosta Rica · Nov 5, 2008#190
Teaser Pic.

This is the LS1/LS2 GM Manifold that Richard just finished for SEMA

Of course it doesn't look anything like ours but it shows the quality we can expect for the Yaris unit.

🤤
Picture not included in this copy
ChinoCharlesOH · Nov 5, 2008#191
Holy sheep shit.
PETERPOOPOahu · Nov 5, 2008#192
Man I CAN'T wait. 25 more days until completion.
kouThread starternj · Nov 5, 2008#193
ChinoCharlesOH · Nov 5, 2008#194
I have literally forgone food and drink saving for this manifold. I cannot wait man.
PETERPOOPOahu · Nov 5, 2008#195
yah seriously. i put all my airsoft guns up for sale. they aren't offerring me enough for them though. Hmm. Plan B


*However the company i works for gets a bonus safety check at the end of the year at the christmas company party. That is how I will be paying for this!
pinoypizzaboylas vegas/ henderson · Nov 5, 2008#196
I already sold $700 worth of pizzas.. Can't wait. That gm manifold those are itbs right?? 🤤
CASTREXCosta Rica · Nov 5, 2008#197
Yeap those are ITB's.

Some day boy, some day! we will have something like that. 😁
pinoypizzaboylas vegas/ henderson · Nov 5, 2008#198
whatever Richard makes for us itbs or turbo I will buy. 🙂
GalavoxxSan Francisco · Nov 6, 2008#199
Originally Posted by cali yaris ↑
I hope he does, and I'm the one selling them.
Hey Cali, is he really going to be making more than just the ten? I would love to buy one but my bank account is recovering from getting married. If you are getting some of these what's your time frame after this initial 10 are produced?
cali yarisCanoga Park, CA · Nov 6, 2008#200
I'll talk to him again -- I'm working on having the production run include some extras for me to carry in my store. stay tuned... (so to speak)