Yarisworld Archive

Yaris Intake Manifold

201 posts · 92,195 views · page 4 of 5

Replies continued

yaris-meAnaheim, CA · Mar 27, 2009#151
Bump.
cali yarisCanoga Park, CA · Mar 27, 2009#152
Yes, I tried that. No response.
cleongSingapore · May 12, 2009#153
My head tells me it is vaporware, but my heart is telling me, "Say it isn't true!"
AlexNet0Rockland, ME · May 12, 2009#154
Originally Posted by cleong ↑
My head tells me it is vaporware, but my heart is telling me, "Say it isn't true!"
God, stop bumping this thread, LOL, Its painful
DerFlosserUSA · May 12, 2009#155
bump
PHXDEMONPhoenix, AZ · May 13, 2009#156
Richard PMed me. He said if we keep bumping this thread he will build the manifold once it hits 100 pages.
cali yarisCanoga Park, CA · May 13, 2009#157
LOL.

I'm going to call Dynatek directly tomorrow, since that was the company that was going to produce it. Let's get to the bottom of this.
Benggolf2Richmond, B.C., Canada · May 13, 2009#158
Originally Posted by PHXDEMON ↑
Richard PMed me. He said if we keep bumping this thread he will build the manifold once it hits 100 pages.

😁 Its like telling us...forget it! 😉
blacksandiegovitzJust chillin' out brah ! · May 13, 2009#159
Bump
cali yarisCanoga Park, CA · May 13, 2009#160
^ LOL
DerFlosserUSA · May 13, 2009#161
This is probaby the only performance modification aside from a higher flow exhaust mani/header that I would consider. Subtle and simple while retaining the characteristcs which make the 1NZ a nice motor.👍
blacksandiegovitzJust chillin' out brah ! · May 13, 2009#162
bump x2
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 13, 2009#163
BUMP
marcustoronto, canada · May 13, 2009#164
thought this is R.I.P... i guess thread is a born again... BUMP to infinity.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 13, 2009#165
still DEAD but i guess garm is gonna make his own pieces now....
cali yarisCanoga Park, CA · May 13, 2009#166
UPDATE 5/13

I talked directly with Dynatek today. Good conversation.

1. Richard Holdener is no longer with Dynatek. That explains his disappearance from here too -- since they are the ones who would produce the parts.

2. They are interested in the project and are going to check on a few things and get back to me. They are at a show this week so there won't be any more news until next week.

So, we have established connection and MIGHT be able to get this project back on track. There ya go. 👍
fujiHonolulu · May 13, 2009#167
If the project DOES get back in production, please sign me up for an intake manifold!🍻
cali yarisCanoga Park, CA · May 13, 2009#168
If it does we'll start a new thread and finally let this one die. 👍
marcustoronto, canada · May 13, 2009#169
assuming no cel codes. im in

1. marcus
2.
3.
4.
5.
6.
7.
DerFlosserUSA · May 13, 2009#170
awesome. Thanks for the effort(s) Garm! 👍
cali yarisCanoga Park, CA · May 13, 2009#171
marcus, too soon for that. I need to get this farther along before we can start a list again.

Thanks for the enthusiasm though!
GalavoxxSan Francisco · May 13, 2009#172
Holy Bat Guano!! I've been lurking for ages on this one. Let's git her done!
mrbondIllinois · May 13, 2009#173
For sure, we need to get this piece in production. frownonfun has the Rotrex kit, and I'm betting he'll yield much bigger gains. When I get around to getting a Procharger unit sometime next year, I'll need to have one of these.
TreyzLong Island, NY · May 13, 2009#174
Garm to the rscue haha!
whooppee777Maryland · May 13, 2009#175
dead
cali yarisCanoga Park, CA · May 13, 2009#176
What does "dead" mean? Read post 167.
whooppee777Maryland · May 13, 2009#177
how the hell did i miss that post.

i still say its dead.

i highly doubt dynatek is going to make the manifolds for half a dozen yaris owners that are willing to buy them.

turboyaris can make this. i'll even send him my oem manifold for him to do it, he just needs someone local to him to come test fit it every now and then
ztrack157Biggs, CA · May 13, 2009#178
I think there should be no more posts until product is being produced. If 5 or 10 or more are made they will sell. Until then I don't think our hearts can handle another heartbreak.
cali yarisCanoga Park, CA · May 13, 2009#179
1. If I have a conversation with the manufacturer that is positive, WHICH I DID, I'm going to post that. Ztrack, are you telling me not to share real results?

2. It's not dead, whooppee. I'm going to buy a production run, regardless of how many people "sign up" or not. If you want in early, you'll get a better deal. So your point about the number isn't relevant.

3. I'm GETTING these made, one way or another. Dynatek owns the design and there is a confirmed prototype, so that is the easier route, I think.

Or.... go make your own, but it hasn't happened yet, has it? 🙁
Nexus1155Dorchester · May 13, 2009#180
i'll even send him my oem manifold for him to do it, he just needs someone local to him to come test fit it every now and then
Weapon R has made one for the XA or XB w/e and it is based off oem manifold i think and no gains FAIL, Holdeners longer runners provided gains....
whooppee777Maryland · May 13, 2009#181
Originally Posted by Nexus1155 ↑
Weapon R has made one for the XA or XB w/e and it is based off oem manifold i think and no gains FAIL, Holdeners longer runners provided gains....
the weapon r manifold doesnt have the right bolt pattern for the throttle body. xb/xa have 3 bolts yaris has 4. i had already looked into that long ago
whooppee777Maryland · May 13, 2009#182
Originally Posted by cali yaris ↑
1. If I have a conversation with the manufacturer that is positive, WHICH I DID, I'm going to post that. Ztrack, are you telling me not to share real results?

2. It's not dead, whooppee. I'm going to buy a production run, regardless of how many people "sign up" or not. If you want in early, you'll get a better deal. So your point about the number isn't relevant.

3. I'm GETTING these made, one way or another. Dynatek owns the design and there is a confirmed prototype, so that is the easier route, I think.

Or.... go make your own, but it hasn't happened yet, has it? 🙁
if you stick the prototype manifold on ur engine i will kill you. if you car gets any more awesome a black hole will form at the earths core and all life will be over as we know it
cali yarisCanoga Park, CA · May 13, 2009#183
LOL, I'll probably be LAST, like with the 23mm sway bars. 🙁
whooppee777Maryland · May 13, 2009#184
roof scoop hasnt been installed either has it?
cali yarisCanoga Park, CA · May 13, 2009#185
What is that related to? 🤷
ztrack157Biggs, CA · May 13, 2009#186
Originally Posted by cali yaris ↑
1. If I have a conversation with the manufacturer that is positive, WHICH I DID, I'm going to post that. Ztrack, are you telling me not to share real results?

2. It's not dead, whooppee. I'm going to buy a production run, regardless of how many people "sign up" or not. If you want in early, you'll get a better deal. So your point about the number isn't relevant.

3. I'm GETTING these made, one way or another. Dynatek owns the design and there is a confirmed prototype, so that is the easier route, I think.

Or.... go make your own, but it hasn't happened yet, has it? 🙁
Garm I have more faith in you than anyone else on the forum. You put up and rather than shut up and deliver. I'm not telling you to not share results. I'm just visual I want to see something rather than hear about possibilities. ZPI and Tricky Dicky have made me skittish. When its in production I will be in line but until then... well you know how that goes. Good luck
bubaamexico · May 13, 2009#187
good luck i hope to see that manifold later on production
newyarSoCal · May 15, 2009#188
If this comes alive and becomes a real product I'm definitely interested.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 16, 2009#189
Originally Posted by whooppee777 ↑
how the hell did i miss that post.

i still say its dead.

i highly doubt dynatek is going to make the manifolds for half a dozen yaris owners that are willing to buy them.

turboyaris can make this. i'll even send him my oem manifold for him to do it, he just needs someone local to him to come test fit it every now and then
he needs a manifold? i have 2 sitting around right now. pm going to him now.
cali yarisCanoga Park, CA · May 16, 2009#190
He'll need time with a car and a dyno to test the design. You can't just make one of these and assume it makes more power.
ROCKLAND TOYOTAROCKLAND COUNTY NY · May 16, 2009#191
Originally Posted by cali yaris ↑
He'll need time with a car and a dyno to test the design. You can't just make one of these and assume it makes more power.
I'LL start him on his journey and see where it ends up. the manifold is just sitting around so what harm is there. besides he has his own car to use and access to a dyno i believe.....
SabretoothSt Cloud FL · May 16, 2009#192
I thought turboyaris was doing 240sx's now?
SabretoothSt Cloud FL · May 17, 2009#193
Oh and it wouldnt be the first time that turboyaris has built an intake mani for our cars...
did some diggin.

turbo intake manifold
SabretoothSt Cloud FL · May 17, 2009#194
Originally Posted by whooppee777 ↑
the weapon r manifold doesnt have the right bolt pattern for the throttle body. xb/xa have 3 bolts yaris has 4. i had already looked into that long ago

Get in touch with Morgan, she obviously did the retrofit of TB setups for her blitz kit...maybe she can give us the right direction on making a weapon r intake manifold for the xb fit.
whooppee777Maryland · May 17, 2009#195
im trying to buy his 240sx at the moment having issues allocating the monies for it. he has a 300zx also. he does not have a yaris to test a manifold on, someone would have to bring their yaris to him if he fabricates one
SabretoothSt Cloud FL · May 17, 2009#196
Where is he located?
cali yarisCanoga Park, CA · May 17, 2009#197
besides he has his own car to use and access to a dyno i believe.....
Not a Yaris. That's at least partly why we don't have harness bars yet? 🙁
SabretoothSt Cloud FL · May 17, 2009#198
If he needs a LB to work with, I would be willing to drive the distance, if there was a free Harness bar included...lol
whooppee777Maryland · May 17, 2009#199
new jersey
SabretoothSt Cloud FL · May 17, 2009#200
bah, too far...lol Someone call Jerkratt and tell him to get over there!